artemis USPL - improvements

[cmonex]

I was asked to patch USPL for ROM size checking when flashing via RUU, so this version does not check size even when flashing via USB. (original SPL skips the size checks only when SD flashing.)
I did this a few days ago, but didn't get around to posting it

download from attachment, enjoy! donations are always appreciated to the "To Cmonex" link in my signature :D

how to use it: if you already have a version of artemis USPL installed, simply flash this new version using RUU or from SD (ARTEIMG.NBH on FAT32 formatted SD)

in bootloader (tricolour mode) it should then say version: 1.11.cmon

for instructions on installing any USPL if you have no USPL yet - check out: http://forum.xda-developers.com/showthread.php?t=311403 until I have more time/motivation for userfriendly packaging

more plans: if I get time/motivation I might upgrade this to be full HSPL (overwrite protection)

[tom_codon]

Well done Cmonex..!
Thanks so much.
Peoples of Artemis forum wait it long times already.

Thread Sticked.

Cheers ..!

[ark666]

.......
more plans: if I get time/motivation I might upgrade this to be full HSPL (overwrite protection)

Then with full HSPL, i see a lot of bricks coming to "life". :)

Hope u get motivated enough. :)

Thanks Cmonex, excelent stuff.

[fhcoolos]

Thanks !
But I dont really understand. Can Flash under vista ou seven with no drivers ?

[Zecanilis]

it's the same process.
The difference is that you can flash any rom without size limits.
Before you only could do this with SD Card method.

[drlalitbida]

its not working
it gives the same error : invalid size
canu explain step by step plzzzz

[Zecanilis]

Is you bootloader showing SPL 1.11.cmon?

[drlalitbida]

i have replaced the nbh file of artemis uspl with this one
then started uspl after that once it gets over i started
ruu upgrade utility
thats the way how it is done or something else
during this process no bootloader screen comes

[Zecanilis]

And where is the response to my question? ....

[cmonex]

i have replaced the nbh file of artemis uspl with this one
then started uspl after that once it gets over i started
ruu upgrade utility
thats the way how it is done or something else
during this process no bootloader screen comes


you need to enter the tricolour screen to check version.

[cmonex]

Thanks !
But I dont really understand. Can Flash under vista ou seven with no drivers ?

does artemis have an issue with vista? tell me what kind of problem please

[drlalitbida]

thats what i have written
no bootloader screen comes in between the upgrade process

[sheennick123456]

thats what i have written
no bootloader screen comes in between the upgrade process

you have to manually go to bootloader to flash the image

[ark666]

does artemis have an issue with vista? tell me what kind of problem please

Usb drivers while u enter bootloader.

http://forum.xda-developers.com/showpost.php?p=1312109&postcount=118

Cheers.

[dufrain]

I want to thank you very much for this useful work. However I couldn't try it yet :) Because at the end of the rom update utility application (I mean %100) it gives a error 270 udate error image file corrupted. Please check your update utility I have tried all these attempts while my phone is at the bootloader mode.
Thank you in advance

[sean777]

Can I just replace the RUU_USPL_signed.nbh file with the one from the "Artemis Update SPL (USPL) v.01 - Another way to flash *ANY* rom to your device" thread? (http://forum.xda-developers.com/showthread.php?t=311403)

[LITANG]

oh！thanx！it's funny！

[USRFobiwan]

Can I just replace the RUU_USPL_signed.nbh file with the one from the "Artemis Update SPL (USPL) v.01 - Another way to flash *ANY* rom to your device" thread? (http://forum.xda-developers.com/showthread.php?t=311403)

Yes. All other files are the same.. infact you need to because zip does not have start_uspl.exe ;)

[akki.1989]

hello everyone ....i want to upgrade my o2 orbit wm6 to wm 6.1 or any cooked rom currently i am using wm6 but the problem is my active syncro is not working is there any other to start uspl without acive syncro.....give some suggestions ...thank for ur time...

[kalixo]

Hello!

Is there any way to load USPL from bootloader (without ActiveSync)?

Regards!

[your_suraj]

Whenever I try to upgrade my SPL to uspl_cmon, I get this error code 260, either in xp or windows 7.

I can do all, like flash ROMs, but this one I've not been able.

Help me, I tried all I can, I tried in XP, uncheck the "Allow USB connection" while in bootloader mode in WMDC. but till now I have not been able to update SPL to cmon uspl.

[your_suraj]

Whenever I try to upgrade my SPL to uspl_cmon, I get this error code 260, either in xp or windows 7.

I can do all, like flash ROMs, but this one I've not been able.

Help me, I tried all I can, I tried in XP, uncheck the "Allow USB connection" while in bootloader mode in WMDC. but till now I have not been able to update SPL to cmon uspl.

Please respond any masterminds. I'd be very grateful.

[babbelut]

remove sim and sdcard.
- try to cook the official rom
- uspl
- cmon
- babbelut

[cool12346]

not work on

IPL 1.25.0001

SPL 1.25.0000

show invalid certificate

any chance?

[Mini-Z]

not work on

IPL 1.25.0001

SPL 1.25.0000

show invalid certificate

any chance?

Have you seen:
http://forum.xda-developers.com/showthread.php?t=716136
I think I had same problem as you.

[kollins]

Hey man appreciate all ur effort but how do i get a USPL file that work on window 7
(x64)

[natong]

Thanks! work very well.

[natong]

not work on
IPL 1.25.0001
SPL 1.25.0000


Use my packages it works well on Vista/7.
Remove SIM and SDHC card. Before run start_uspl.exe.

-----------------------------------------------------
Artemis_SPL_1.11.cmon.zip (1.74 MB)
http://www.multiupload.com/CP0WXK9IW9

1. Download
2. Unzip
3. start_uspl.exe
-----------------------------------------------------

old version:
Artemis_SPL_1.11.0000.zip (1.74 MB)
http://www.multiupload.com/WEYHV55ULN

[jcsy]

Dopod P800W

IPL 1.25.0001
SPL 1.27.0000
GSM 02.69.90 (I think this is Radio)
OS 1.25.0.0

I have tried hard reset my phone, then running 1.11 , results in white screen for about 5 minutes ( do I need to wait longer ?)

then I tried running 1.11 cmon, which also results in white screen as well.

can I follow the guide above, since my SPL is abit higher?

Ive downloaded Andrew82 WM6.1 ROM, waiting to flash to that..

[natong]

I faced the same problem. White screen. I removed SIM and SDHC card. So I can flash normally.

[jcsy]

I faced the same problem. White screen. I removed SIM and SDCARD. So I can flash normally.

i used Active Sync 4.5 and then it worked

before I was using WMDC on Windows 2008, effing fail

[your_suraj]

Tells me "INVALID CERTIFICATE"

[raving_nanza]

@your_suraj

ERROR [260] : CONNECTION
This happens when you try to flash a new SPL to your device. do USPL again.

@jcsy

sorted now?