2 Different Rom Builds, with extra themes UPDATED June 24th, Fastest Cupcake

[mssmison]

All my future builds will be on the google code page http://code.google.com/p/vogue-android/ to make it easy for everyone to find all the files they need to run android.

[mssmison]

**RESERVED**

[mssmison]

**Reserved**

[vilord]

EDIT: Removed

[bangout]

cant get data sync to open. do i need dzos data.img to get to sync contacts and email?

[mssmison]

yes, for all google apps to work you need to have already setup your google account in DZO's 1.1 build.

[bangout]

finally got dzo's build working and now using that data.img. quick question, does the camera work cause it didnt come on for me. not a big deal just wanted to know what all worked. nice and smooth build.

[mssmison]

finally got dzo's build working and now using that data.img. quick question, does the camera work cause it didnt come on for me. not a big deal just wanted to know what all worked. nice and smooth build.

no, I didn't bring that over yet. I honestly never use the camera on my phone.

[s0v3r1gn]

Why does my HaRET lock up at 100%? 1.1 booted just fine for me. When I try to load this build it locks up and has to be soft reset after that.

I am running NFSFAN's 6.5v10 WinMo ROM.

EDIT: Fixed, I had to re-extract and recopy the files over. Something must have corrupted randomly some where for me.

[robobeau]

I am also using NFSFAN's 6.5 v10 ROM, and after running this Android build once, my WM ROM got royally corrupted... I'm going to hard reset and pray for the best... :\

I'm not trying to be a troll, here. But if anyone could help identify what went wrong, I'd greatly appreciate it.

I extracted all the files (except for data.img) and fired up Android. Waited a few minutes (like the thread said I would have to) and then I waited a minute or two before turning off the phone (through Android). Restarted the phone, and my Titanium home screem doesn't work, and neither does the Start Menu. And right when it starts I get "Cannot Start Voice Command. Reinstall and try again."

[mssmison]

my wife had the same problems on her white vogue, I don't really know what it is... Pretty much means android is out of the question for you until we figure it out.

[harminoff]

Thanks for this. I am finding it really hard to read the screen though. I did allign it. Is there a cleartype thing for android? non cupcake build looks real nice, but cupcake seems to have issues with readability.

Again, thanks for this, can't wait to see the final results.

[robobeau]

After a Hard Reset, everything worked fine. I didn't really lose anything, since I installed V10 this morning.

I like the performance on the ROM. Feels lighter and faster. The only thing I don't like much is the GUI customization, more specifically the inability to switch back to the default theme. The loading intro screen is DEAD SEXY, though. :D

The lack of camera kind of sucks, but we all know how hit-and-miss camera has been on Vogue Android development, so it's understandable.

[commandant83]

strange, im running nfsfans v10 rom and ran this as well and wm wasnt affected whatsoever.

[mssmison]

Thanks for this. I am finding it really hard to read the screen though. I did allign it. Is there a cleartype thing for android? non cupcake build looks real nice, but cupcake seems to have issues with readability.

Again, thanks for this, can't wait to see the final results.

use the different initrd that vilord posted in the other thread. There's one that has bigger type/icons etc

http://forum.xda-developers.com/showpost.php?p=3914750&postcount=3744.

[mssmison]

After a Hard Reset, everything worked fine. I didn't really lose anything, since I installed V10 this morning.

I like the performance on the ROM. Feels lighter and faster. The only thing I don't like much is the GUI customization, more specifically the inability to switch back to the default theme. The loading intro screen is DEAD SEXY, though. :D

The lack of camera kind of sucks, but we all know how hit-and-miss camera has been on Vogue Android development, so it's understandable.

I built this version as I was tired of the same old android look. I may post a default theme later, after band of brothers is done :)

[mssmison]

strange, im running nfsfans v10 rom and ran this as well and wm wasnt affected whatsoever.

It's a real hit and miss thing. Some phones are good and some aren't. I wish I could say for sure what it is.

[harminoff]

use the different initrd that vilord posted in the other thread. There's one that has bigger type/icons etc

http://forum.xda-developers.com/showpost.php?p=3914750&postcount=3744.

Thanks, looks a bit better.

I'm also getting lines across my screen, very small and kind of flashing. Is that a cupcake issue, or something on my part?

[vilord]

could be maybe related to panel type? I'm not sure... try setting panel type to 0 in default.txt

[njakobs]

Thanks mssmison, is working great for me with DZO's 128mb data.img.

Would love to see a standard themed version though.

Will let you know how battery life goes. Had wake up issues with original power options so changed them to match yours.

Cheers

[nic_kline]

This is awesome.
Just wanted to send out a thank you.
New build works great (except for the camera).
And I guess it's the overclocking, but it's incredibly snappy.

Thanks for all the hard work, guys. I'm always excited for new updates.

[okcoolthnx]

Holy crap, the portrait keyboard with PREDICTIVE TEXT is worth this upgrade alone. THANK YOU SO MUCH.

[vilord]

If you don't like all of the dude's customizations, I posted a clean ion build here: http://forum.xda-developers.com/showthread.php?t=523692
It supports GPU and full power collapse.

[aven_soulgazer]

finally got dzo's build working and now using that data.img. quick question, does the camera work cause it didnt come on for me. not a big deal just wanted to know what all worked. nice and smooth build.

How did you get DZO's to work? I'm trying to get it to run with no luck. TheDude's version here works fine except for not being able to login to google services. I used to be able to get DZO's 1.1 to work but it's not with the replacement Touch I got.

[katmandu421]

I am also using NFSFAN's 6.5 v10 ROM, and after running this Android build once, my WM ROM got royally corrupted... I'm going to hard reset and pray for the best... :\

I'm not trying to be a troll, here. But if anyone could help identify what went wrong, I'd greatly appreciate it.

I extracted all the files (except for data.img) and fired up Android. Waited a few minutes (like the thread said I would have to) and then I waited a minute or two before turning off the phone (through Android). Restarted the phone, and my Titanium home screem doesn't work, and neither does the Start Menu. And right when it starts I get "Cannot Start Voice Command. Reinstall and try again."

I had the same issue, but thought it was because my phone got a little wet last night! Try putting it in the toaster oven at 140 degrees for a couple of hours. Worked for me! Or maybe just restart and see if your titanium is restored.;)

[katmandu421]

I'm sure you've seen this, but thought I'd post it here as well where the 1.5 activity is being discussed.

From dzo:
**********************************
I'm having trouble getting 2.6.27 to work reliably, there's a nasty bug that makes the phone hang when doing mdp blits sometimes. Until I track it down I've built a 2.6.25 kernel with a fix for the backlight problem in 1.5, this means you should be able to use pm_sleep_mode=0 or 1. You can find it in the usual place, only zImage is different.

For people making 1.5 system images, you need to make sure copybit.msm7k.so and lights.msm7k.so are in /system/lib/hw or the blit engine and backlight won't work.
**********************************

Aside from the "dark" theme (I cant see my weatherbug temperature in the notifications bar!) I think the sleep mode issue is the only major downfall of the 1.5 build.

[mnherky]

does anyone know if these builds still have the call waiting bug?

[vilord]

for now they all still have the call waiting bug, as DZO's radio interface (that we are all using) doesn't currently implement that function.

[vilord]

--deleted duplicate post--

[vilord]

--deleted duplicate post-- stupid forum

[jaredakelly]

i'm running dzo version right now. unzipped everything and pasted on the sd folder. nothing really has changed? it looks a bit "crisper" but it doesn't seem like i'm doing it right because it doesn't look like the new build.

i dont know what i could do wrong? it's really not that hard. i rebooted and everything?

[mssmison]

i'm running dzo version right now. unzipped everything and pasted on the sd folder. nothing really has changed? it looks a bit "crisper" but it doesn't seem like i'm doing it right because it doesn't look like the new build.

i dont know what i could do wrong? it's really not that hard. i rebooted and everything?

Well it looks totally different so somethings wrong. Are you sure you overwrote the system.img file?

[jaredakelly]

nevermind got it working! thanks for the new build. looks awesome. i'm going to be messing with this for quite awhile

[jaredakelly]

is there any way to use the first gpu kernal for this build? it's alot more "peppy". just wondering because i like the build and i love finally having a keyboard but nothing compares to the first gpu kernal, not even when it's overclocked.

[mssmison]

use DZO's newest kernel he just posted on his site. Should be perfect, you'll also want to change your power settings in the default.txt to 1 or 0

[tatnai]

a question and a suggestion:

Suggestion: can you post in the title when the package has been updated?

Question: is the screen align process the same as with dzo's builds - blue keyboard up + hold power and tap all four corners?

Thanks for working on the cupcake line!

[t1mman]

Quick one: Is the GPS working on this one?

Thanks!

[mssmison]

No GPS is a driver issue. There are currently no Android devices that use the GPSOne receiver, until a phone comes out with it included or until someone writes a driver the gps will not work.

[bangout]

How did you get DZO's to work? I'm trying to get it to run with no luck. TheDude's version here works fine except for not being able to login to google services. I used to be able to get DZO's 1.1 to work but it's not with the replacement Touch I got.


i used an old build from back in may cause i couldnt get the newest one to work that has the larger data.img file. used 4-5-09 build

[jaredakelly]

use DZO's newest kernel he just posted on his site. Should be perfect, you'll also want to change your power settings in the default.txt to 1 or 0

what does the power settings do? just so i know what setting it to 1 or 0 actually does?

[aven_soulgazer]

Thanks. The older one's I had tried were older than that. I'll give that specific group a try. Thanks a lot.


Edit:
It worked out for me too, Thanks

[jaredakelly]

is there anyway to build off the very first gpu enabled kernal?

my phone went from peppy and fast to sluggish and slow with a keyboard. i even put running apps at 2 and it's soooooooo slow. i dont know what's wrong with the latest kernals. i know others have this problem as well. right now winmo is faster that what i have right now. i'm not trying to complain because i'm grateful for all the progress but with all the new updates after the first gpu kernal come sluggish performance.

if the phone rings it will be 2 rings before it actually shows who is calling......if i try to pull up one app it takes all the processing power and doesn't pull up for 3-4 seconds....

seriously try the first gpu kernal compared to the latest one, it's a HUGE difference.

is there anything i can do about this sluggish performance?

[aven_soulgazer]

Does the contacts list synch with 1.5? I can't get my new contacts to gmail contacts and my new gmail contacts to my phone. When I go into settings it shows the calender and the email syncing but not the contacts.

Edit:
I downgraded to v1.1 and the contacts synced in but not out and I kept getting error messages

[jaredakelly]

*crosses fingers* and hopes the new clean Ion build will solve sluggish problems

[hexto]

2 things. The second I changed to DZO's latest kernel from The Dude's the phone slowed down by at least half. Even if I click something it takes seconds for it to highlight and even longer to actually open.

Also, is it possible that I may have downloaded a program that isn't compatible with this build? I ask because whether I use my data.img and the data.gz or just the date gz I cannot use market or the gmail app. Can't figure it out. :confused:

[mssmison]

2 things. The second I changed to DZO's latest kernel from The Dude's the phone slowed down by at least half. Even if I click something it takes seconds for it to highlight and even longer to actually open.

Also, is it possible that I may have downloaded a program that isn't compatible with this build? I ask because whether I use my data.img and the data.gz or just the date gz I cannot use market or the gmail app. Can't figure it out. :confused:
You wouldn't use data.gz and data.img, the gz will overwrite you data.img.
So you started with DZO's 1.1 and setup google login, checked market and it worked? Than installed my files but not adding the data.gz file?

[hexto]

You wouldn't use data.gz and data.img, the gz will overwrite you data.img.
So you started with DZO's 1.1 and setup google login, checked market and it worked? Than installed my files but not adding the data.gz file?

I started with 1.1 then when I added your files it over wrote the others.

[mssmison]

I started with 1.1 then when I added your files it over wrote the others.

but not data.img or data.gz right? If you put data.gz on you have to start over

[bangout]

mssmison where can i get a copy of your zimage i didnt see it in the clean build

[mssmison]

moving forward use DZO's Zimage files, they're now working perfectly with my build. (At least I have no problems)

[jaredakelly]

HUGE difference with the ION build!!

very fast! i'm loving it

[aven_soulgazer]

with the original thedude system i can get online. With the clean I can't. I restarted and tried again, still couldn't. Put thedude original system back in and could get back online first boot.

[mssmison]

with the original thedude system i can get online. With the clean I can't. I restarted and tried again, still couldn't. Put thedude original system back in and could get back online first boot.

I'm not sure what to tell you. It worked for me just fine. Not the first boot, but always on the second.

[mssmison]

HUGE difference with the ION build!!

very fast! i'm loving it

Glad you like it :)

[ernestchi]

hi, i'm just starting to use andriod now and i'm having trouble updating to your build. i sucessfully ran DZO's android1.1, and i then downloaded your latest system.img and replaced it in the root directory of my SD card. my phone gets stuck on the android splash screen, and never fully loads. any ideas?

is there a different zImage i should be using?

[mssmison]

hi, i'm just starting to use andriod now and i'm having trouble updating to your build. i sucessfully ran DZO's android1.1, and i then downloaded your latest system.img and replaced it in the root directory of my SD card. my phone gets stuck on the android splash screen, and never fully loads. any ideas?

is there a different zImage i should be using?

you need DZO's latest kernel and vilords latest initrd.
http://forum.xda-developers.com/attachment.php?attachmentid=193819&d=1244513887
and
http://it029000.massey.ac.nz/vogue/files/

[ernestchi]

Thanks for the help. Its up and running now. How can I calibrate the screen? Do i hold the camera button while tapping the four corners? I have trouble typing with the full qwerty keypad.

[okcoolthnx]

Whoaaaa the new ION build is WAY faster. Is there a themeless version of it?

[mssmison]

Thanks for the help. Its up and running now. How can I calibrate the screen? Do i hold the camera button while tapping the four corners? I have trouble typing with the full qwerty keypad.

press camera, hold power and press top right and bottom left. and you can always use compact qwerty. :)

[mssmison]

Whoaaaa the new ION build is WAY faster. Is there a themeless version of it?

no sorry. I really don't know if I'll do a themeless version. I've been using android a while and I'm kinda tired of the vanilla look.

[bangout]

Is anybody having problems with syncn contacts. everything syncs ok except contacts.

[mssmison]

Is anybody having problems with syncn contacts. everything syncs ok except contacts.

Mine are working good, and it's checked off to sync contacts, in sync settings

[joannerve]

With this built I can't connect to internet

[mssmison]

I've found when it doesn't connect on boot I have to restart android, sometimes 2 times before the internet connects. I had the same on the other Ion build by vilord.

[bangout]

still cant sync contacts. tried re-booting a couple times still dosent work. never had this problem with any other build or yours. and one other question is anybody have problems with sms? cause i can send but i cant recieve or look at the thread.

[mssmison]

delete your data.img, and start over with the android 1.1 buld. I've found that changing roms, can sometimes cause corruption of the data.img file. A good idea is to back up a fresh 1.1data.img after google setup. Then back it up every now and then, especially when changing roms it's a good idea.

[mssmison]

still cant sync contacts. tried re-booting a couple times still dosent work. never had this problem with any other build or yours. and one other question is anybody have problems with sms? cause i can send but i cant recieve or look at the thread.

If you still can't get it going after that, I guess you could use funambol. It will sync you gmail info.

[bangout]

ok ill try that real quick. thanks

[bangout]

got contacts and sms working with new data image. thanks

[katmandu421]

moving forward use DZO's Zimage files, they're now working perfectly with my build. (At least I have no problems)

I tried the latest zimage with the other "vanilla" Ion build (from the other post, not this one) and it seems to have the same slow performance. Is there a difference between the two 1.5's out besides the theme and pre-installed apps? Can I just change out init and system to change, or are there other differences?

[mssmison]

I tried the latest zimage with the other "vanilla" Ion build (from the other post, not this one) and it seems to have the same slow performance. Is there a difference between the two 1.5's out besides the theme and pre-installed apps? Can I just change out init and system to change, or are there other differences?

The ion build is quite a bit different from thedude build. Thedude build is using cupcake, the same build that you can compile yourself. The ion build is the new build from google that was given out at the android developer conference. There are alot of differences between the two, hence the speed, and working screen brightness etc..
Vilords ION build is a vanilla release, it's based on files I shared with him from haykuro's ion release. The skinned build is different and includes some files from the hero build that's out for the g1's.
So yeah, lots of differences.

[vilord]

katmandu to answer your other question, you can just swap the system.img out, the initrd and zImage are identical

-Jesse

[ljmeli]

Vilord and Mssmison,
is there a difference between the posted ION release in vilord thread and the Themed ION release in this thread (other then the obvious theme addition)

[katmandu421]

katmandu to answer your other question, you can just swap the system.img out, the initrd and zImage are identical

-Jesse

Yup, got it, evaluating now. I am getting a lot of force closes (of various apps that seem to be running in the background). I'll continue to monitor.

Cheers.

[Spalla]

Whenever I boot up, I get a message that says something about a "Google Partner" process shutting down. Could this be an issue with my zImage? It happened in vilord's build as well.

[mssmison]

Vilord and Mssmison,
is there a difference between the posted ION release in vilord thread and the Themed ION release in this thread (other then the obvious theme addition)
I already answered this 2 posts up, just have to read it and it'll explain it.

Whenever I boot up, I get a message that says something about a "Google Partner" process shutting down. Could this be an issue with my zImage? It happened in vilord's build as well.

I get that too. I haven't nailed it down yet. I think it's because we have to bring some of the files up from the cupcake build to make it work properly.

[joannerve]

I can't get connected to internet with the three Dude builds, booting four times every build and nothing. When I go to Modem for get connected it already says connection FAILED then I click in connect and nothing happens. Only setting ppp...FAILED, automatically without to try connect. :confused:
I have my settings in default.txt and in apn settings and it works in other builds like okibi and dzo.

[mssmison]

I would suggest starting with a clean 1.1 data file, make sure when you boot 1.1 you use the initrd that DZO includes with the download. After you have you 1.1 img file, replace the initrd with either vilords new one, and you system.img of course.

[hexto]

delete your data.img, and start over with the android 1.1 buld. I've found that changing roms, can sometimes cause corruption of the data.img file. A good idea is to back up a fresh 1.1data.img after google setup. Then back it up every now and then, especially when changing roms it's a good idea.

Thats what happened to me. I started fresh with a new data.img and everything is perfect. Market keeps track of your downloads so it doesn't take long to get everything back.

[Pandemic187]

Why is it that my clock is smaller than the one in the screenshots, and my backround it red instead of blue?

[aven_soulgazer]

I think the other Ion is the blue one and this is a red one.

How can you clear out the entries on marketplace? I downloaded various things just to look at them and now every time i go for a clean data file it starts downloading all these stupid apps I don't want. I just can't get them out of the downloaded folder of my market.

Thi ion worked for me, but then I saw the post about grabbing the newest zimage and init file. With the newest zimage it does not boot up for me, the gpu zimage and it booted back up again.

[KERKEDAGAIN]

First off, MAD thanks to all of you guys for the work you've done in getting this ION build to work. As mentioned it is so fast that I, too, don't have to set a 'Max Apps' being that it's so snappy. Question: srwalter has successfully gotten caller id on call waiting working and voicemail alert. How hard would it be to get that working on these 1.5 builds? (being that his is 1.1) He mentioned something about a source RIL i think in one of his posts..dont know what it means but it would be great to have in the ION build as well. Here are the links to his posts:

http://forum.xda-developers.com/showpost.php?p=3941499&postcount=3798

http://forum.xda-developers.com/showpost.php?p=3947305&postcount=3804

[KERKEDAGAIN]

*oops, sorry*

[jaredakelly]

First off, MAD thanks to all of you guys for the work you've done in getting this ION build to work. As mentioned it is so fast that I, too, don't have to set a 'Max Apps' being that it's so snappy. Question: srwalter has successfully gotten caller id on call waiting working and voicemail alert. How hard would it be to get that working on these 1.5 builds? (being that his is 1.1) He mentioned something about a source RIL i think in one of his posts..dont know what it means but it would be great to have in the ION build as well. Here are the links to his posts:

http://forum.xda-developers.com/showpost.php?p=3941499&postcount=3798

http://forum.xda-developers.com/showpost.php?p=3947305&postcount=3804

that would be awesome, i'm always missing calls

[mssmison]

First off, MAD thanks to all of you guys for the work you've done in getting this ION build to work. As mentioned it is so fast that I, too, don't have to set a 'Max Apps' being that it's so snappy. Question: srwalter has successfully gotten caller id on call waiting working and voicemail alert. How hard would it be to get that working on these 1.5 builds? (being that his is 1.1) He mentioned something about a source RIL i think in one of his posts..dont know what it means but it would be great to have in the ION build as well. Here are the links to his posts:

http://forum.xda-developers.com/showpost.php?p=3941499&postcount=3798

http://forum.xda-developers.com/showpost.php?p=3947305&postcount=3804

It would just be a matter of intigrating his RIL into the build. I've PM'd him for permission, I'm just waiting for his okay.

[mfpreach]

If I wanna switch between releases can I just swap out the system.img or do I need to go through the whole install 1.1 then upgrade?

[mssmison]

yeah, just swap the system.img files.

[srwalter]

It would just be a matter of intigrating his RIL into the build. I've PM'd him for permission, I'm just waiting for his okay.

Permission granted!

[jaredakelly]

Fyi everyone

http://forum.xda-developers.com/showpost.php?p=3954678&postcount=3807

[katmandu421]

The dudes ion build (red) with the zimage from thedude work awesome together. I have had to set my max processes after a few hours bc I did experience a slow down, but after that it still kept it's performance. Good stuff.

I noticed today that after getting a text, smspopup stated that it could be used with a text-to-speech service and offered a link to download. I downloaded it but when I got anthother text, it didnt give an option to translate to speech. Anyone tried this yet? If so, what are the results, any other requirements?

[magicalan]

has anyone manage to get a screenshot while using the android... i wanna c new things lol

[mssmison]

has anyone manage to get a screenshot while using the android... i wanna c new things lol

check the links in my first post. It looks exactly like those.

[SPpasty]

any explanation for the camera not working with these builds?

i've got a US Sprint Vogue btw

[katmandu421]

The dudes ion build (red) with the zimage from thedude work awesome together. I have had to set my max processes after a few hours bc I did experience a slow down, but after that it still kept it's performance. Good stuff.

I noticed today that after getting a text, smspopup stated that it could be used with a text-to-speech service and offered a link to download. I downloaded it but when I got anthother text, it didnt give an option to translate to speech. Anyone tried this yet? If so, what are the results, any other requirements?

I figured I'd answer my own question. If you have text to speech and SMSpopup installed, when you receive a text, long-press the popup and you will be prompted withe text to speech option. It's like having Stephen Hawking sitting in your phone reading to you! Ha!

Pretty cool and great for vision impaired user, but I don't get a lot of value out of it besides maybe if I get a text while driving.

[hexto]

Awesome build guys. I set it up last night and used it all day today. The only reason I switched to Windows was to get an MMS message and to drive home from work while using bluetooth. Looks great and its stupid fast. I handed my phone to a friend at work that has the G1 and he was impressed. Thanks:)

[Pandemic187]

So...is there any way to change my background from red to blue on these ion themes?

[hexto]

So...is there any way to change my background from red to blue on these ion themes?

Yes. Just press the Menu key (Volume Down) from the home screen and select Wallpaper. From there you can click on Wallpaper gallery. The first one is the blue flames

[Pandemic187]

Yes. Just press the Menu key (Volume Down) from the home screen and select Wallpaper. From there you can click on Wallpaper gallery. The first one is the blue flames
DOH! I didn't realize that was just the wallpaper...:o

[jaredakelly]

i've been using the hero ion build 100% and no problems what-so-ever (besides the normal limitations at the moment) and i just wanted to say thank you again! very fast and stable!

i saw that in dzo's thread they are implementing call waiting caller id, would that work for our build?

[mssmison]

i've been using the hero ion build 100% and no problems what-so-ever (besides the normal limitations at the moment) and i just wanted to say thank you again! very fast and stable!

i saw that in dzo's thread they are implementing call waiting caller id, would that work for our build?

Right now it's not working, I'm working with him to figure out why but I have alot on my personal plate right now... kids.. planning summer vacation etc.. We'll keep at it don't worry. Next for me to fix is the camera :)

[jaredakelly]

Right now it's not working, I'm working with him to figure out why but I have alot on my personal plate right now... kids.. planning summer vacation etc.. We'll keep at it don't worry. Next for me to fix is the camera :)

yeah same here no worries dude. the camera working good actually would be pretty awesome too :D

[katmandu421]

i've been using the hero ion build 100% and no problems what-so-ever (besides the normal limitations at the moment) and i just wanted to say thank you again! very fast and stable!

i saw that in dzo's thread they are implementing call waiting caller id, would that work for our build?

Hey jaredakelly, I'm pretty sure you were the one who was also experiencing the slow down from the later kernels. I'm curious, what version are you using now that gives you the fast and stable performance. The best combination I found so far was the ion (red) system and zimage from the dudes .zip. I switchd over to vilord's latest kernel based on martin's gpu zimage but that seems to hang at times too. Just wondering what combo to try next.

[vilord]

have you tried using the latest initrd from my thread? On my phone everything went from almost unuseably slow to blisteringly fast, now things are quicker than WM :D

[wbuju123]

well i had the same problem but after you use dzo's files to get ur data file replace all the files with everything u just downloaded from the ion files except the data.img and the default script. that should do the trick. the init files and zimage is different for both the ion and the 1.1

[jaredakelly]

Hey jaredakelly, I'm pretty sure you were the one who was also experiencing the slow down from the later kernels. I'm curious, what version are you using now that gives you the fast and stable performance. The best combination I found so far was the ion (red) system and zimage from the dudes .zip. I switchd over to vilord's latest kernel based on martin's gpu zimage but that seems to hang at times too. Just wondering what combo to try next.

yeah i was the one that was having major problems with the other kernels.

right now i'm having awesome performance from downloading everything in the dudes zip and just switching out the system.img file of the hero ion build. very fast!