PDA

View Full Version : Need Experts To Solve This One....

dm03 shm3h
7th June 2009, 11:09 PM
Hi guys,

Today my D2 decided not to work at all when switching "ON" the screen stays at the windows mobile welcome screen and refuses to continue "Freeze".

I tried soft and hard rests without success...

Anybody can help please?!!!....
wheresmybeaver
7th June 2009, 11:21 PM
Doesn't sound good.

The next thing I would try is to take the battery out for about 30 minutes, then try again with battery replaced. I had a weird issue with an old PDA where on ocassion it would refuse to turn on, and the only fix was to leave out the battery for at least 15 minutes.

Good luck
ark666
8th June 2009, 12:21 AM
Hi, though your question has nothing to do with any kind of development, :), maybe you should be posting in general section, this is a wild guess, the answer to your question is easy, enter bootloader and flash the oficial rom suited for your device.

If this doesn´t work send it to your distributor.

Cheers.
dm03 shm3h
8th June 2009, 12:40 AM
ark666,

Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?
ark666
8th June 2009, 01:37 AM
ark666,

Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?

:D
Should i know???

By pressing volume down + the red soft reset button will take you to the bootloader.


The Topaz is yours, what language is it??

Maybe this post will help you:

http://forum.xda-developers.com/showthread.php?t=507232
dm03 shm3h
8th June 2009, 02:04 AM
I went to the bootloader by pressing volume down + ON/OFF button. However, at the bottom of the screen it says (Serial)...

My Topaz language or original ROM is (RUU_Topaz_HTC_WWE_1.39.405.2_Radio_Signed_Topaz_6 1.20t.25.10_3.43.25.19_Ship).
ark666
8th June 2009, 02:26 AM
volume down + the red soft reset button will take you to the bootloader.

Download the rom and flash it in bootloader, (tricolour screen).

Sorry but i can´t make it easier.
dm03 shm3h
8th June 2009, 02:49 AM
ark666,

I already went to the bootloader (tricolour screen) and I have a copy of the rom (at my desktop). The point here (correct me if I'm wrong) to flash it in the bootloader by doing these:

1- Go to bootloader....
2- Connect D2 to my PC through USB cable...
3- Then run the downloaded ROM...

Sorry but I'm still new to PPC....
dm03 shm3h
8th June 2009, 09:27 PM
Flashed the origial ROM and problem solved.

THX