Bricked Trinity-USB invisible....HELP

[kaybeeuk]

:confused:I tried flashing a cooked ROM but now it stays on the splash screen.
I can get the striped screen up (IPL-0.50 SPL-1.07.0000) which displays USB when usb lead plugged in BUT I cant see the PDA through vista or xp-So I can't reflash using sync.I need to flash through SD card...this failed when i renamed the NBH file...Any help would be appreciated..Thanks

[alecomel]

on + cam + reset and restore the original rom with Usb, also the actsyn dont see the phone.(xp not vista)

[kaybeeuk]

No good..I tried this, the trinity is invisible to the xp pc, but pc does make the connecting sound.:(

[alecomel]

Try also the actsync no connect and no see the Phone(not connected). Only the original rom Work in this manner.

[adejager1]

No good..I tried this, the trinity is invisible to the xp pc, but pc does make the connecting sound.:(

But if the PC makes the connecting sound then it is connected and flash should work. I always flash my phone this way.

In the device manager under Mobile Devices do you see HTC USB Sync?

BTW do you use Vista to flash? The vista drivers for the HTC USB Sync don't work.You have to install the drivers from XP to flash a phone this way.

[SuperSport]

Sounds to me like your phone is not unlocked, or does not have Hard SPL installed.

Be sure to read these forums to verify everything is set up correctly to flash cooked roms.

http://forum.xda-developers.com/forumdisplay.php?f=312

Good luck, and report back if you still cannot get it to work. ;)

[kaybeeuk]

I can confirm that the phone IS unlocked, power+camera reset leaves it with striped screen, L/H + R/H softkey+reset gets it to bootloader and eventually to failed ROM splash screen,same with simple reset.
Connecting to XP gets a connect sound BUT phone is not displayed by exploring or by activesync.
Because the PC can't see the PDA, it can't flash. I feel flashing with SD card is the way forward...almost any rom would do-just to get PC to "see" PDA through USB. If anybody has a foolproof SD rom flash I would be grateful.Thanks

[kaybeeuk]

I can confirm that the phone IS unlocked, power+camera reset leaves it with striped screen, L/H + R/H softkey+reset gets it to bootloader and eventually to failed ROM splash screen,same with simple reset.
Connecting to XP gets a connect sound BUT phone is not displayed by exploring or by activesync.
Because the PC can't see the PDA, it can't flash. I feel flashing with SD card is the way forward...almost any rom would do-just to get PC to "see" PDA through USB. If anybody has a foolproof SD rom flash I would be grateful.Thanks

[adejager1]

But did you look into the device manager after you hear the bingbong sound to see if there is a mobile device listed there?

If there is delete it, disconnect and reconnect.

Do you have olipro hard spl on your phone?

[kaybeeuk]

Hi Adejager, my PDA doesn't come up on the support screen at all. It MIGHT be a usb socket to Motherboard problem. I can sort that out later, after I flash through sd card. (BTW i don't have OLIPRO hard SPL). if I can get a rom flashed with card I can then move forward

[ppatel223]

you need to install hard spl, and it will solve your problem, i had same exact problem before.

[kaybeeuk]

:confused:Yes, but how do i flash hard spl via mini sd card?? (usb not working)

[taipan_snake]

:confused:Yes, but how do i flash hard spl via mini sd card?? (usb not working)

Download the Hard-SPL file, unzip it and copy the .nbh file to the root folder of your Mini SD card, but be sure to rename it to "TRINIMG.nbh". Then, insert the SD card and boot into the bootloader.