Magic SPL HBOOT collection

[Amon_RA]

Check out this (http://forum.xda-developers.com/showthread.php?t=548218) thread in case you have a perfected SPL (fastboot remote: not allow).

Proceed on your own risk, you might brick your phone!!!

The following SPLs "should" work on PVT 32A and PVT 32B boards :

How to flash :
Skip step 2 and boot into recovery mode instead of step 3, if you already have a custom recovery flashed!

Download the SPL of your choice and copy it to the root of your SD-card.
Download the appropriate recovery here (http://forum.xda-developers.com/showthread.php?t=530492)
Boot in fastboot mode
fastboot boot recovery-RAv1.2.0.G.img or fastboot boot recovery-RAv1.2.0.H.img
Wait a while
Choose Apply sdcard:choose zip and select the required SPL update
Press the GREEN key once the update is done
Press HOME + BACK to reboot


Download

Engineering SPL 1.33.2010 (http://rapidshare.com/files/267475618/update.Engineering-SPL-HBOOT-1.33.2010-signed.zip) - MD5 : 865020FBDFBD9C08950076A701A8A003
Engineering SPL 1.33.2009 (http://rapidshare.com/files/267475617/update.Engineering-SPL-HBOOT-1.33.2009-signed.zip) - MD5 : 6FE91DDD2AC591F8EE838CEA3E5F84B0
Engineering SPL 1.33.2005 (http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip) - MD5 : 2B1AAA9012DC28F88C482E1B21A46FDD
Engineering SPL 1.33.2004 (http://rapidshare.com/files/247838949/update.Engineering-SPL-HBOOT-1.33.2004-signed.zip) - MD5 : 1B49F0A53E147171E7C51F08510CF95F
SHIPMENT SPL 1.33.0009H (http://rapidshare.com/files/247838952/update.SHIPMENT-SPL-HBOOT-1.33.0009H-signed.zip) - MD5 : 85CCC0D8F339C04E5A18A7076F321194
Engineering SPL 1.33.2004 by Crios (http://rapidshare.com/files/319849152/update.SPL_Crios_1.33.2004-signed.zip) - MD5 : 6D20EA62BDB5A6991BD80CA327C03504


Engineering SPL 1.33.2004 by Crios is actually a hex-edit of SPL 1.33.2005 to fool updates.

Original SPL list :
Please update us on any new SPLs so we can include them in this list. :)


HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 (Voldafone NL + UK + Australia)
HBOOT-1.33.0008 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (TIM (Italian))
HBOOT-1.3300.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Nordic Magic A6161)
HBOOT-1.33.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-OFF H : CPLD-12 (Belgian HTC)
HBOOT-1.33.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Greek)
HBOOT-1.33.0009 (SAPP50000) : Sapphire PVT 32A SHIP S-OFF H : CPLD-11 (Rogers)
HBOOT-1.33.0009 (SAPP50000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Rogers)
HBOOT-1.33.0010 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12
HBOOT-1.33.3004 (SAPP30000) : Sapphire PVT 32B DEV S-ON G : CPLD-10 (ION)
HBOOT-1.33.3005 from the Japanese ION


SPL Info

The G or H at the end identify if it's a Google or HTC SPL
ENG : Engineering version
SHIP : Shipment version
DEV : Development version (ION)
S-off and S-on : Security on and off (writing directly to nand or not) , most probably not SPL linked, S-on prevents you to downgrade.
PVT 32A (HTC branded) : 288MB RAM / Qualcomm MSM7200a
PVT 32B (Google branded) : 192MB RAM / Qualcomm MSM7201a
CPLD XX : What does this mean?

[sleepr]

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.3300.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17

I have a nordic magic, its HTC branded, its the same as the swedish 3 sell.

has anyone with the same spl as i have tried to flash into some other spl? i really want to use a standard vanilla google rom instead of this htc branded one!

[nk02]

however, vodafone magic original spl is 1.33.0004

[law81]

Do you know how to backup an original SPL from Htc Magic?

[TheArtiszan]

Which came from the ion phone does anyone know.
Sapphire Pvt32 Dev s-on g
Hboot-1.33.3004 (sapp30000)
CPLD-10
Radio-2.22.19.26I
Apr 30 2009,22:15:49
Is what I have right now

[mack]

anyone know what the CPDL-XX means? also ship s-off or s-on means?

I have:

Sapphire PVT 32a Ship s-off H
HBOOT-1.33.0009 (SAP500 00)
CPLD-11
Radio-3.22.20.17


weird how my 32A has a CPLD-11 while all others have 12. My magic is from rogers btw.

[Amon_RA]

Just a guess (correct me if I'm wrong) :

- CPLD stands for "Complex programmable logic device" :
CPLD 10 : Ion + Vodafone
CPLD 11 : Vodafone?
CPLD 12 : HTC?
Does anyone know what the 10,11 and 12 mean?

- The H or G at the end identify if it's a Google or HTC SPL
- ENG means Engineering version
- SHIP means SHIPMENT version
- Not sure what S-off and S-on mean (Signature check on or off ?)

Concerning the boards :
PVT 32A : 288MB RAM / Qualcomm MSM7200a
PVT 32B : 192MB RAM / Qualcomm MSM7201a

[Draxter]

My magic was on vodafone:

CPLD-10 with PVT 32B and SPL 1.33.0004

[sleepr]

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.3300.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17



I have the nordic magic(A6161), its HTC branded, its the same as the swedish 3 sell.

has anyone with the same spl as i have tried to flash into some other spl? i really want to use a standard vanilla google rom instead of this htc branded one!



does anyone know if this:
Engineering SPL HBOOT-1.33.2005
- Confirmed working on PVT 32B - CPLD11
- Confirmed working on PVT 32A - CPLD12

could work on my magic?? and will i be able to flash a vanilla google rom with it? :)

[bunny0007]

What about the lang code??

My vodafone always start with german lang, or is it saved different place in the phone?

[Amon_RA]

does anyone know if this:
Shipment SPL HBOOT-1.33.0009H
- Confirmed working on PVT 32B - CPLD11
- Confirmed working on PVT 32A - CPLD12

could work on my magic?? and will i be able to flash a vanilla google rom with it? :)

You already have this SPL on your phone, I don't think there's a difference between 1.33.0009H and 1.3300.0009.

You should flash the Engineering SPL HBOOT-1.33.2005 if you want to flash different roms. If you want to run google's vanilla rom (like the ion) you should also flash the corresponding radio version... It can be risky since you don't have a backup of your radio/SPL.

[sleepr]

You already have this SPL on your phone, I don't think there's a difference between 1.33.0009H and 1.3300.0009.

You should flash the Engineering SPL HBOOT-1.33.2005 if you want to flash different roms. If you want to run google's vanilla rom (like the ion) you should also flash the corresponding radio version... It can be risky since you don't have a backup of your radio/SPL.

i copied the wrong text, i really ment this one :D
but what can go wrong if it doesnt work, and why shouldnt it work? i dont really understand what the different SPL does. and why do i need a certain SPL to flash some roms?

lots of questions, but hopefully someone can answer them all! ;P
thanks in advance!

[Amon_RA]

I dont really understand what the different SPL does. and why do i need a certain SPL to flash some roms?


Check out this (http://forum.xda-developers.com/showthread.php?t=455860) thread for more SPL info. It's for the HTC Dream but you get a better view on what SPL's are.

[sleepr]

Check out this (http://forum.xda-developers.com/showthread.php?t=455860) thread for more SPL info. It's for the HTC Dream but you get a better view on what SPL's are.

that did explain alot, but it raises another question.. is anyone working on a hardspl for the magic? :)

[bachviet]

Which came from the ion phone does anyone know.
Sapphire PVT 32B Dev S-on G
Hboot-1.33.3004 (sapp30000)
CPLD-10
Radio-2.22.19.26I
...
My Ion has the same info.

[adityaw]

I have :

Sapphire PVT32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
June 2, 2009

is it possible to downgrade the SPL? Say to the .0009?

[kirbyn]

SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
Apr 20 2009,15:30:43

Vodafone Spain HTC Magic
(Haykuro's SPL, rooted, and a lot of rom's flashed...)

Jorge/kirbyn

[escaflo]

Just a question.. I am currently on

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.3300.0009 (SAPP10000)
CPLD-12

Does this mean I can flash the Engineering SPL HBOOT-1.33.2005 and I will be able to install google ion rom?

Also how safe is this? And if I want to install the google ion rom, can i use the image downloaded from HTC? including the radio and recovery image?

Thanks!

[dr_dre]

sapphire pvt 32b ship s-on g
hboot-1.33.0004 (sapp10000)
cpld-10
radio-2.22.19.26I
apr 9 2009 23:30:40

its a dutch vodafone version

tried superhero v2 conversion,
ion ,
htc uk
all work , more or less :)

got nandroid backup from device before experimenting,
but cant flash back due to verify failures.

[Crios]

SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2004 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
Apr 20 2009,15:30:43

My Mod SPL for run OTA Update and nandroid backup. :-)

http://drop.io/criogenic/asset/engineering-mod-spl-hboot-1-33-2004-rar

[funfobia]

Just a question.. I am currently on

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.3300.0009 (SAPP10000)
CPLD-12

Does this mean I can flash the Engineering SPL HBOOT-1.33.2005 and I will be able to install google ion rom?

Also how safe is this? And if I want to install the google ion rom, can i use the image downloaded from HTC? including the radio and recovery image?

Thanks!

I don't think so, i already flash 1.3300.2005 from Haukuro and still can't flash
those with Google ROM, ION or Hero. Those ROM will stuck on logo screen. We still stuck to daldroid ROM.

Is this SPL different from Haykuro version?

[psydroid]

I tried Engineering SPL HBOOT-1.33.2005 on HTC Magic from TIM (Italian)

# fastboot erase hboot
erasing 'hboot'... OKAY
# fastboot flash hboot hboot.img
sending 'hboot' (512 KB)... OKAY
writing 'hboot'... INFOsignature checking...
FAILED (remote: signature verify fail)

hmm.. I guess it's bricked now? Doesn't turn on at all anymore.. :(

[bernard black]

I don't think so, i already flash 1.3300.2005 from Haukuro and still can't flash
those with Google ROM, ION or Hero. Those ROM will stuck on logo screen. We still stuck to daldroid ROM.

Is this SPL different from Haykuro version?

Could you try the Rogers ROM and what Hero ROM did you try, SuperHero v2?

Oh, and did you try downgrading the radio to, someone hinted that this might be necessary.

[Amon_RA]

Just a question.. I am currently on

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.3300.0009 (SAPP10000)
CPLD-12

Does this mean I can flash the Engineering SPL HBOOT-1.33.2005 and I will be able to install google ion rom?

Also how safe is this? And if I want to install the google ion rom, can i use the image downloaded from HTC? including the radio and recovery image?

Thanks!

Yes this will work, I tried this myself on the same configuration but for me the camera didn't work (I'll try to find a fix for this soon).
- You'll need to flash the Engineering SPL HBOOT-1.33.2005 or 2004
- The official update script will not complete because it will look for CPLD-10 and you have a CPLD-12. To solve this you can :
1. update the script yourself and resign the update.
2. or you can unzip the update files and flash all images manually (so bypassing the installationscript).
3. or you can run modded ion rom with fixed installscript and root access from here (http://andblogs.net/2009/05/ion-update-available/)

=> Don't forget to also flash the radio of the ION, otherwise you'll be stuck at the bootscreen.

[Amon_RA]

I tried Engineering SPL HBOOT-1.33.2005 on HTC Magic from TIM (Italian)

# fastboot erase hboot
erasing 'hboot'... OKAY
# fastboot flash hboot hboot.img
sending 'hboot' (512 KB)... OKAY
writing 'hboot'... INFOsignature checking...
FAILED (remote: signature verify fail)

hmm.. I guess it's bricked now? Doesn't turn on at all anymore.. :(

:( Sorry to hear this. Did you try to boot in fastboot mode again (maybe take out the battery and put it back in again) ?

Do you remember what your board type + CPLD and previous SPL was?

[psydroid]

:( Sorry to hear this. Did you try to boot in fastboot mode again (maybe take out the battery and put it back in again) ?

Do you remember what your board type + CPLD and previous SPL was?

I tried removing battery / holding back button - nothing works. It's all dead (gives the impression of a dead battery but even with AC connected it does nothing).

I guess "$ fastboot erase hboot" really bricks it when new image fails.

Hope someone knows a trick to get it do something at all :confused:

If I remember correctly i had the "SPL HBOOT-1.33.0008" stock installed before.

[goa200]

got
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.3300.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17

tried Engineering SPL HBOOT-1.33.2005 (Working on 32A and 32B)

# fastboot erase hboot
erasing 'hboot'... OKAY
# fastboot flash hboot hboot.img
sending 'hboot' (512 KB)... OKAY
writing 'hboot'... INFOsignature checking...
FAILED (remote: signature verify fail)

havnt powered off my phone so its still in fastboot usb mode.

Also tried
Shipment SPL HBOOT-1.33.0009H but same error
same for
Engineering SPL HBOOT-1.33.2004

[tripledes]

I tried removing battery / holding back button - nothing works. It's all dead (gives the impression of a dead battery but even with AC connected it does nothing).

I guess "$ fastboot erase hboot" really bricks it when new image fails.

Hope someone knows a trick to get it do something at all :confused:

If I remember correctly i had the "SPL HBOOT-1.33.0008" stock installed before.


I'm having the same problem, my phone does nothing....did you found a solution?

Device info:

PVT 32B - CPLD10
SPL HBOOT-1.33.0004 (IIRC)

[bernard black]

Whatever you guys do if the flash fails, do not reboot the phone!

[Amon_RA]

In case you are getting "remote: signature verify fail" :

# Download haykuro's SPL (http://sapphire-port-dream.googlecode.com/files/spl-signed.zip) and rename it to update.zip and copy it to your sdcard.
# Reboot into recovery mode via a rooted recovery image.
# Apply update.

[psydroid]

In case you are getting "remote: signature verify fail" :

# Download haykuro's SPL (http://sapphire-port-dream.googlecode.com/files/spl-signed.zip) and rename it to update.zip and copy it to your sdcard.
# Reboot into recovery mode via a rooted recovery image.
# Apply update.

This will only work then the hboot partition it not erased already by doing "$ fastboot erase hboot".
When this is done, it is not possible to turn off the phone, if you do that the the device won't boot anymore (and neither will the recovery console / fastboot).
I guess it's a bricked one then.

*looks with sad eyes at my HTC Magic*

[Amon_RA]

This will only work then the hboot partition it not erased already by doing "$ fastboot erase hboot".
When this is done, it is not possible to turn off the phone, if you do that the the device won't boot anymore (and neither will the recovery console / fastboot).
I guess it's a bricked one then.

*looks with sad eyes at my HTC Magic*

I removed the procedure to avoid people from bricking their phones.
I'll try to update the procedure with a more user friendly one asap.

[bernard black]

So if you're stuck at fastboot with an erased hboot, what do you do in order to push Haykuro's SPL to the SDcard?

In other words, is there any way what so ever to push a file to the SD card via fastboot?

I guess fastboot push update.zip /sdcard/update.zip wont do it.

[Crios]

I removed the procedure to avoid people from bricking their phones.
I'll try to update the procedure with a more user friendly one asap.

The safe way is use a update.zip with recovery mod method.

this is my SPL into update.zip.

update spl crios 1.33.2004
http://drop.io/hidden/cjuojksggdfgvh/asset/dXBkYXRlLXNwbC1jcmlvcy0xLTMzLTIwMDQtemlw

:-)

[jmaurice]

ION from Google Japan:
SAPPHIRE EVT1 32B DEV S-ON G
HBOOT-1.33.3005 (SAPP20000)
CPLD-10
RADIO-2.22.19.26I
May 29 2009, 14:38:09

HT-03A released by NTT Docomo:
SAPPHIRE EVT1 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP20000)
CPLD-10
RADIO-2.22.19.26I
May 27 2009, 19:06:41

[funfobia]

Yes this will work, I tried this myself on the same configuration but for me the camera didn't work (I'll try to find a fix for this soon).
- You'll need to flash the Engineering SPL HBOOT-1.33.2005 or 2004
- The official update script will not complete because it will look for CPLD-10 and you have a CPLD-12. To solve this you can :
1. update the script yourself and resign the update.
2. or you can unzip the update files and flash all images manually (so bypassing the installationscript).
3. or you can run modded ion rom with fixed installscript and root access from here (http://andblogs.net/2009/05/ion-update-available/)

=> Don't forget to also flash the radio of the ION, otherwise you'll be stuck at the bootscreen.

What is your Magic brand? What I experience so far is that phone with HTC or PVT32A is not able to flash the same way as PVT32B. If you downgrade radio on PVT32A you will get bricked. The same way you flash wrong SPL. As daldroid and Haykuro mention that the boot process is different between "HTC" brand and "with Google" brand.

[tripledes]

Well, seems like my device is totally dead....will be going to vodafone tomorrow and try to trick'em a little...:) luckily I haven't changed anything else on the phone, just erased hboot.

Let's see if they'll give me a replacement....

BTW, what's the right procedure to install a new hboot? Should I install first the haykuro's SPL? Because as far as I understand it's signatures problem....or am I wrong?

Thanks.

[dr_dre]

pls correct me if im wrong.

i am able to flash multiple roms ( ion or otherwise) on my

sapphire pvt 32b ship s-on g
hboot-1.33.0004 (sapp10000)
cpld-10
radio-2.22.19.26I
apr 9 2009 23:30:4

But im not able to use my nandroid backup rom due to the wrong ( read original) spl ? and a patched spl for my magic im able to get the original rom in place ?

so all i have to do is wait until this is sorted and thats whats this thread is all about .

[Amon_RA]

What is your Magic brand? What I experience so far is that phone with HTC or PVT32A is not able to flash the same way as PVT32B. If you downgrade radio on PVT32A you will get bricked. The same way you flash wrong SPL. As daldroid and Haykuro mention that the boot process is different between "HTC" brand and "with Google" brand.

I have a PVT 32A CPLD12 and I could "downgrade" the radio without any problems after upgrading to the 2005 SPL.

[sleepr]

I have a PVT 32A CPLD12 and I could "downgrade" the radio without any problems after upgrading to the 2005 SPL.

how did you do it? please post a step by step guide :)

[Amon_RA]

I've created signed update.zip packages for all SPL's and updated the procedure.
Changes are applied in the first post.

[pdagenius]

Magic SPL HBOOT collection :

Engineering SPL HBOOT-1.33.2005 Signed update.zip
- Confirmed working on PVT 32B - CPLD11
- Confirmed working on PVT 32A - CPLD12



Is this 1.33.2005 SPL the same as Haykuro's linked from the Rooting Wiki (http://android-dls.com/wiki/index.php?title=Magic_Rooting)?

I am using Haykuro's SPL on my Vodafone Magic which is PVT 32B CPLD-10

[Amon_RA]

Is this 1.33.2005 SPL the same as Haykuro's linked from the Rooting Wiki (http://android-dls.com/wiki/index.php?title=Magic_Rooting)?

I am using Haykuro's SPL on my Vodafone Magic which is PVT 32B CPLD-10

Yes, it's the same one.

[pdagenius]

Yes, it's the same one.

Thank you - that will save some confusion :)

[sleepr]

How to flash :
1. Download a modded recovery that uses test-keys (Haykuro or Daldroid or ...)
2. Download one of the above signed SPL updates and rename it to update.zip
3. Copy update.zip to the root of your SD-card
4. Switch the Magic to fastboot mode
5. $fastboot boot <moddedrecovery.img>
6. Apply the update


My Magic: HBOOT-1.3300.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Nordic Magic A6161)

so if i follow your guide here, i should be able to flash my magic with the Engineering SPL HBOOT-1.33.2005 Signed update.zip SPL, and then i should be able to flash it with an ion och vanilla google rom right? or do i need to flash something else too? :P

[zetsurin]

Just to let you know, the SPL labelled

"- HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 (Dutch Vodafone)"

is also exactly the same for UK Vodafone. Thanks for creating a very useful thread.

[sirmick]

Australia vodaphone

sapphire pvt 32b ship s-on g
hboot-1.33.0004 (sapp10000)
cpld-10
radio-2.22.19.261
apr 9 2009,23:30:40

I think the same as UK/Dutch Vodafone.

Haven't tried flashing yet.

[Theros]

Rogers, HTC Branded. Currently running Daldroid's rom with root through ADB shell without a problem.

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32

[cmonex]

anyone know what the CPDL-XX means? also ship s-off or s-on means?

I have:

Sapphire PVT 32a Ship s-off H
HBOOT-1.33.0009 (SAP500 00)
CPLD-11
Radio-3.22.20.17


weird how my 32A has a CPLD-11 while all others have 12. My magic is from rogers btw.


CPLD is CPLD. ;) (check wikipedia etc)
S OFF/ON is Security unlocked/locked. means radio allows a lot better access to it

[mack]

CPLD is CPLD. ;) (check wikipedia etc)
S OFF/ON is Security unlocked/locked. means radio allows a lot better access to it

haha roger roger on the CPLD. Complex Prgrammable Logic device. read up on it at wiki. now whats the difference between the versions? 10,11,12? probably impossible to figure out.

[rayg256]

Hi,just helping out..
My specs:

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009, 21:02:32

Baseband Version: 62.52S.20.18U_3.22.20.17
Kernel Version: 2.6.27-dd63d1eb u70000@Android-X01
Build number: 2.16.401.5 146733 CL#33743 release-keys

Fastboot enabled (made nandroid backup)

This is a HTC Magic phone bought from Cosmote in Greece.
Hope this helps :)

One question though, how can I make a backup of my own SPL before flashing a new one, just in case I need to return the device for repair?

[neodoxy]

Yes this will work, I tried this myself on the same configuration but for me the camera didn't work (I'll try to find a fix for this soon).
- You'll need to flash the Engineering SPL HBOOT-1.33.2005 or 2004
- The official update script will not complete because it will look for CPLD-10 and you have a CPLD-12. To solve this you can :
1. update the script yourself and resign the update.
2. or you can unzip the update files and flash all images manually (so bypassing the installationscript).
3. or you can run modded ion rom with fixed installscript and root access from here (http://andblogs.net/2009/05/ion-update-available/)

=> Don't forget to also flash the radio of the ION, otherwise you'll be stuck at the bootscreen.

where can i find the radio of the ION, My device is
PVT 32A CPLD-12,now with SPL HBOOT-1.33.2005

[tre4lien]

Note that Theros & My Rogers 32A phones are labelled SAPP50000 with CPLD12... A combination not currently in the SPL list; although I don't know if the different CPLD actually requires a different SPL or if the SAPP50000 means anything unique at all.

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32


ps. my first post.
Thx to all veterans for slowly converting us noobs into contributors.

[cocaice2009]

after rooted, and flashed spl2004 for my htc magic, now it stuck on the 'htc magic' screen', can't enter hboot/recovery mode, the info of my original SPL:

My HTC Magic SPL info:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32

seems i have to send it to service centre:(

[jfive74]

Note that Theros & My Rogers 32A phones are labelled SAPP50000 with CPLD12... A combination not currently in the SPL list; although I don't know if the different CPLD actually requires a different SPL or if the SAPP50000 means anything unique at all.

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32


ps. my first post.
Thx to all veterans for slowly converting us noobs into contributors.

flashed my rogers using SPL HBOOT-1.33.2005 and besides that it list the pvt as "unknown" it worked just fine. :D

[cocaice2009]

okay, will get back my 'bricked' htc magic from service centre in 5 working days... i'm just wondering if the SPL listed here will conflict with the rooting processes that mentioned here? http://forum.xda-developers.com/showthread.php?t=530527

I had rooted successfully, but after that, i flashed spl2004, then got bricked.

[antony34]

My HK Version HTC Magic

HBOOT-1.33.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-NO H : CPLD-12 (HK-SMV)
RADIO-3.22.20.17
May 8 2009,21:02:32

Baseband Version: 62.52S.20.18U_3.22.20.17
Kernel Version: 2.6.27-dd63d1eb u70000@Android-X01
Build number: 2.16.707.4 146733 CL#33772 release-keys

[mober]

PVT 32B boards (Google branded) :
Engineering SPL HBOOT-1.33.2004 Signed update.zip

PVT 32A boards (HTC branded) :
Engineering SPL HBOOT-1.33.2005 Signed update.zip (This is the same one as the Haykuro SPL).
Modded HBOOT-1.33.2004 by Crios Signed update.zip (This is the Haykuro SPL which has been modded).
SHIPMENT SPL HBOOT-1.33.0009H Signed update.zip (Flash this one if you want to return to your stock SPL).

I see the list of SPLs and there's some points I'm not quite sure about.

1. I have a vodafone htc magic (spain), I have a PVT 32B board with 1.33.2005 spl (Haykuro SPL) and as i can see at the first post, the 1.33.2005 spl is only for PVT 32A isn't it? How can be it posible?

2. The 1.33.2004 spl for PVT32B is the same that the 1.33.2005 spl for the PVT 32B I have? I want to say if with it i could do nandroids backups, install anothers roms, etc... with it. This should be the SPL I should use in my PVT32B???

3. The Modded HBOOT-1.33.2004 by Crios is the same thar haykyro spl with only the version number modified in order to acces to OTA updates? or it has some other modification?

4. Where can i download the original spl of my vodafone magic? (1.33.0004 (SAPP100.00) : Sapphire PVT 32B SHIP S-ON G : CPLD-10)

I'm sorry for do so many questions :confused:

[Cheesebaron]

I see the list of SPLs and there's some points I'm not quite sure about.

1. I have a vodafone htc magic (spain), I have a PVT 32B board with 1.33.2005 spl (Haykuro SPL) and as i can see at the first post, the 1.33.2005 spl is only for PVT 32A isn't it? How can be it posible?

I found out today that I have done the same thing with my Magic.

I have the German Vodafone HTC Magic with the same board a PVT 32B, and I am running the Haykuro SPL, that is supposed to work with the 32A boards only, or that is at least according to this post. It works fine, phone boots everytime, flashing modified ROMs works fine, I guess everything works as supposed to. Could someone please enlighten us? :)

[Caid444]

I'm not sure who the heads of the rom development are for the magic, as of now. What I am sure of is, there're a lot of brickings going on. I too bricked my magic after rooting, then trying to flash the spl. The problem with the whole process is, there's no start to finish guide for new users. There're bits and pieces of information here and there spread out across the forum, but no tutorial really states which is the beginning of the entire process.

I would love to go through all the different posts about bricked phones and try to find a common denominator, but I unfortunately don't know enough about the phone to start making assumptions. There are, however, users on here who know what they're doing.

We need a go to resource which lists the process for both the boards (a and b) which carry the magic name. It seems to me that following the process for one, when you should follow it for another, can easily end up in totally locking up your phone. (bricked right out of fastboot and all).

I'll start a thread on the main development page asking all those who've bricked their phones to give details as to which phone they have, and what point of modifying their phone, they got to bricking it. Perhaps we can find a common problem that is occurring. I can almost guarantee that these bricks are being made on account of the poor presentation of information in the forum.

Let's figure it out, and consolidate a better tutorial from start to finish, for all new users.

I'll be happy to help in any way that I can.

Caid.

444

[Amon_RA]

1. I have a vodafone htc magic (spain), I have a PVT 32B board with 1.33.2005 spl (Haykuro SPL) and as i can see at the first post, the 1.33.2005 spl is only for PVT 32A isn't it? How can be it posible?

It will work on PVT 32B but 1.33.2005 is from HTC not from Google so it's actually not MADE for PVT 32A. There were some people reporting bricks when they tried to flash PVT 32B with 1.33.2005 that's why I updated the first post.


2. The 1.33.2004 spl for PVT32B is the same that the 1.33.2005 spl for the PVT 32B I have? I want to say if with it i could do nandroids backups, install anothers roms, etc... with it. This should be the SPL I should use in my PVT32B???

No it's not, 1.33.2004 is from Google (PVT 32B) boards, 1.33.2005 is from HTC (PVT 32A). See point 1 above, if 1.33.2005 is working for you just leave it and be happy you didn't brick your device :D


3. The Modded HBOOT-1.33.2004 by Crios is the same thar haykyro spl with only the version number modified in order to acces to OTA updates? or it has some other modification?

This is correct, Crios hex-edited 1.33.2005 to show 1.33.2004 so PVT 32B users could use this SPL to install Google branded updates which require a 1.33.2004 SPL.


4. Where can i download the original spl of my vodafone magic? (1.33.0004 (SAPP100.00) : Sapphire PVT 32B SHIP S-ON G : CPLD-10)

As soon as Vodafone releases an update with their SPL you can extract it and keep it as a backup. As far as I know there is none available at the moment.

[Amon_RA]

I'm not sure who the heads of the rom development are for the magic, as of now. What I am sure of is, there're a lot of brickings going on. I too bricked my magic after rooting, then trying to flash the spl. The problem with the whole process is, there's no start to finish guide for new users. There're bits and pieces of information here and there spread out across the forum, but no tutorial really states which is the beginning of the entire process.

I would love to go through all the different posts about bricked phones and try to find a common denominator, but I unfortunately don't know enough about the phone to start making assumptions. There are, however, users on here who know what they're doing.

We need a go to resource which lists the process for both the boards (a and b) which carry the magic name. It seems to me that following the process for one, when you should follow it for another, can easily end up in totally locking up your phone. (bricked right out of fastboot and all).

I'll start a thread on the main development page asking all those who've bricked their phones to give details as to which phone they have, and what point of modifying their phone, they got to bricking it. Perhaps we can find a common problem that is occurring. I can almost guarantee that these bricks are being made on account of the poor presentation of information in the forum.

Let's figure it out, and consolidate a better tutorial from start to finish, for all new users.

I'll be happy to help in any way that I can.

Caid.

444

A brick is when the SPL flash goes wrong and you can't get into fastboot mode anymore... This happens when :
- you erase your hboot and boot right after
- you flash an SPL not meant to run on your board
- something goes wrong while flashing the SPL

As long as you can get into fastboot you didn't brick your phone...

[julon2000]

For the records, HTC Magic from Orange Switzerland:

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT 1-33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32

[addiecool]

I am getting a

downloading 'boot.img'... FAILED (remote: not allow)

error when I try ./fastboot-mac boot daldroid-recovery.img

Any help on that?

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT 1-33.00010
CPLD-12
RADIO-3.22.20.17

[addiecool]

I am getting a

downloading 'boot.img'... FAILED (remote: not allow)

error when I try ./fastboot-mac boot hboot.img

Any help on that?

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT 1-33.00010
CPLD-12
RADIO-3.22.20.17

[Amon_RA]

I am getting a

downloading 'boot.img'... FAILED (remote: not allow)

error when I try ./fastboot-mac boot hboot.img

Any help on that?

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT 1-33.00010
CPLD-12
RADIO-3.22.20.17

See first post of this Thread :

Haykuro quote : "T-Mobile myTouch : 1.33.0006 and 1.33.0010 is the dreaded "perfected" SPL".
This means that it's currently not possible to run "fastboot boot image" on these SPL's, so don't try to flash them.

[addiecool]

so can anyone crack that SPL? thanks

[addiecool]

So I have a HBOOT which is not rootable. Somebody do something. I am willing to donate. I need to root my Magic. It is crippled without that.

Thanks in advance guys

[amitrana]

See first post of this Thread :

Haykuro quote : "T-Mobile myTouch : 1.33.0006 and 1.33.0010 is the dreaded "perfected" SPL".
This means that it's currently not possible to run "fastboot boot image" on these SPL's, so don't try to flash them.

Hi, current list in the first post lists following
- HBOOT-1.33.0010 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12

So does Kaykuro's comment apply only to 'Tmobile myTouch'? I bought HTC Magic in India which is unlocked but SPL is 1.33.0010

[addiecool]

I bought the same from India and got the same SPL/ Since I am a little new to it I would appreciate someone;s help on this.

Did not know that Airtel would ship such a crippled phone

[addiecool]

Hi, current list in the first post lists following
- HBOOT-1.33.0010 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12

So does Kaykuro's comment apply only to 'Tmobile myTouch'? I bought HTC Magic in India which is unlocked but SPL is 1.33.0010

Do you also have Google Apps like Maps, Talk and sync missing????

[nop56773]

Hi,

I'm trying to understand everything well so that I don't brick my german vodafone magic. This procedure posted on the first page:

How to flash :
1. Download the appropriate recovery here, and rename it to update.zip.
2. Copy update.zip to the root of your SD-card
3. Switch the Magic to fastboot mode
4. $fastboot boot <moddedrecovery.img>
5. Apply the update

Is done after rooting or before? If it is after, why do we need this? I'm getting a bit confused about the procedure to root my Magic from:

http://android-dls.com/wiki/index.php?title=Magic_Rooting

I understand that I have to fast boot with adb (or turn on with volume down + power) and then do the update. What I don't understand is which update I have to use to root my Magic and which features depend on it (besides rooting of course).

Thanks.

[Amon_RA]

Hi,

I'm trying to understand everything well so that I don't brick my german vodafone magic. This procedure posted on the first page:

How to flash :
1. Download the appropriate recovery here, and rename it to update.zip.
2. Copy update.zip to the root of your SD-card
3. Switch the Magic to fastboot mode
4. $fastboot boot <moddedrecovery.img>
5. Apply the update

Is done after rooting or before? If it is after, why do we need this? I'm getting a bit confused about the procedure to root my Magic from:

http://android-dls.com/wiki/index.php?title=Magic_Rooting

I understand that I have to fast boot with adb (or turn on with volume down + power) and then do the update. What I don't understand is which update I have to use to root my Magic and which features depend on it (besides rooting of course).

Thanks.

Let me try to explain it as simple as possible :

To enable root you need set ro.secure=0 in the default.prop file which is located in the boot partition of your phone. You can't just update default.prop file because you don't have write rights (=you need root access for this). So we need root to get root... ;)

A logical solution would be to "dump" the boot partition, unpack the dumped image, update the default.prop file, repack the dumped image, sign the image and flash the image to the phone. Simple eh?

Unfortunately you can only sign the image with test-keys (because we don't have the google release-keys) and unfortunately most stock "recovery menu's" will not allow you to update a zipped package that is signed with test-keys. Crap...

So all we would need to do is to replace the recovery with one that will allow you to update a zipped package signed with test-keys, right?

Luckily the fastboot command allows you to boot any recovery image, even those allowing test-keys!

Some lucky people have the change to get a Magic equiped with a recovery that will allow zipped packages signed with test-keys by default :-)

This means they can dump the recovery image for you so you can fastboot it and be able to update zipped packages signed with test-keys! Yay!

So, these are the steps you need to take if you want to root your own device the manual way :

1. fastboot with the "special" recovery image allowing test-key signed packages.
2. update a test-key signed package that contains an engineerings SPL allowing you to make a dump of your boot partition. (=nandroid backup)
3. make a nandroid backup of your boot partition.
4. unpack the boot dump image, update the default.prop file, repack the boot image, sign the image with test-keys and pack it into an update package.
5. update the package containing the modified boot image.
6. boot
7. enjoy your root access

[nop56773]

Hi Amon_RA,


Before you had posted you detailed explanation (thanks for that) I tried rooting my Magic acording to that know wiki page (I don't have the link right now). That involved using and update.zip as described which i assume that it contains the test keys you mention below.

After that, I tried fastbooting, launching the recovery imagem and applying the update.zip with a new rom. It seems to be working fine with the new image.


Anyway, I see that I haven't followed you proposed steps but I hope that I haven't permantely screwed up anything.

Filipe


P.S. - I haven't flashed any recovery image. I don't really understand what's that useful for, so I haven't done it.

[Amon_RA]

P.S. - I haven't flashed any recovery image. I don't really understand what's that useful for, so I haven't done it.

Filipe, the recovery contains a feature called nandroid backup and nandroid restore. This enables you to fully backup your device and restore it anytime. It's very a useful feature if you ask me ;)

[nop56773]

Hi again,

I use the recovery image after fastbooting and using

fastboot boot <recovery-image>.img


what is not clear is why should I flash it instead of aparently booting it from the PC while connected through USB

[Cheesebaron]

Hi again,
I use the recovery image after fastbooting and using

fastboot boot <recovery-image>.img

what is not clear is why should I flash it instead of aparently booting it from the PC while connected through USB

Well you do not necessarily have to flash it. But if you don't want to do it the fastboot way every time, you can safely flash it to the phone.

[nop56773]

Thanks Cheesebaron. I was assuming that but I wasn't sure.

Filipe

[MontAlbert]

For the record:

3 Australia, HTC branded Magic:

Sapphire PVT 32A SHIP S-0N H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17

[tect]

MALAYSIA HTC MAGIC
HBOOT-1.33.0010 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12

[tect]

Dear Amon Ra, what is the tools to unpack/repack the boot.img?
thanks

[htcmagic]

sapphire pvt 32b ship s-on g
hboot-1.33.0004 (sapp10000)
cpld-10
radio-2.22.19.26I
apr 9 2009 23:30:40

its a dutch vodafone version

tried superhero v2 conversion,
ion ,
htc uk
all work , more or less :)

got nandroid backup from device before experimenting,
but cant flash back due to verify failures.

Hi, i got the exactly the same specs on ukl vodafone htc magic. Could you please give some pointers how to get root on this model?
I have performed nandroid backup with success.

[amitrana]

MALAYSIA HTC MAGIC
HBOOT-1.33.0010 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12

Hi, can you please tell me what steps you followed? If I understand correctly just few messages back Amron quoted hyakaru's message stating this 1.33.0010 cannot be rooted. Sorry if I completley mis-understood the quote.

I tried to follow steps as given here http://www.arbitraryuser.com/blog/2009/06/20/rooting-a-vodacom-htc-magic-and-upgrading-the-firmware-in-south-africa-to-get-android-market-and-more but during fastboot I get following error.

downloading 'boot.img'... FAILED (remote: not allow)

Can you please share what steps you followed?

[sunboa]

thanx, this post did help me!

[pichurri]

Hello there,

So I bricked the phone, it gets stuck in a "htc magic" screen, :(. But still can boot the radio boot loader, (power + action key, getting a blank screen and blue light). Now I'm trying to find a way to run an update from there, any ideas?

Forgot to mention, here are some results to things already tried:
BACK + END KEY -> "htc magic" screen
VOLDOWN + END KEY -> "htc magic" screen
ACTION (trackball center) + END KEY -> Radio Bootloader
HOME + END KEY -> "htc magic" screen

[guaiwujia]

i got a new device's HBOOT, from HT03A (Japan Ntt DoCoMo)
please see the attachment,
plaase note the first line:SAPPHIRE EVT1 32B SHIP S-ON G

according to the "perfected" SPL what Haykuro said,
is this one could not flash any rom?

[robotician]

i got a new device's HBOOT, from HT03A (Japan Ntt DoCoMo)
please see the attachment,
plaase note the first line:SAPPHIRE EVT1 32B SHIP S-ON G

according to the "perfected" SPL what Haykuro said,
is this one could not flash any rom?

IMHO, you can not flash. check this out.

Haykuro quote : "T-Mobile myTouch : 1.33.0006 and 1.33.0010 is the dreaded "perfected" SPL".
This means that it's currently not possible to run "fastboot boot image" on these SPL's, so don't try to flash them.

[priyaradha]

I have a quick question I have a Rodgers 32A magic (on ATT network) i flashed my SPL, i didn't make note of my default settings but once i flashed to the
Engineering SPL HBOOT-1.33.2005 Signed update.zip

my phone read's :

Sapphire Unknown 32A Eng S-OFF H
HBOOT-1.33.2005 (SAPP50000)
CPLID-12
Radio-3.22.20.17
Apr 20 2009,15:30:43

I had to flash mine in order to flash my data.img back into the phone. What does it mean by Unknown ? What do i have to worry about in the future ? Can I reset my SPL back to default, even though i don't know it.

[bcrook]

I have a quick question I have a Rodgers 32A magic (on ATT network) i flashed my SPL, i didn't make note of my default settings but once i flashed to the


my phone read's :

Sapphire Unknown 32A Eng S-OFF H
HBOOT-1.33.2005 (SAPP50000)
CPLID-12
Radio-3.22.20.17
Apr 20 2009,15:30:43

I had to flash mine in order to flash my data.img back into the phone. What does it mean by Unknown ? What do i have to worry about in the future ? Can I reset my SPL back to default, even though i don't know it.

Mine shows that as well. The S-OFF is good...that means "security off" (See here (http://forum.xda-developers.com/showthread.php?t=529019).

Unless you are having problems don't worry about it...it looks exactly like mine does and mine works fine. The data flash should work now.

[guaiwujia]

IMHO, you can not flash. check this out.

Thanks for your relpy
i just got a X01HT too. But it works not so good now.

[XperiHans]

Can someone upload the original NL / UK SPL from Vodafone? I need it very badly to get my OTA Updates working again... please, please, please :)

[Bayangan]

Indonesia HTC Magic:
Sapphire PVT 32A SHIP S-0N H
HBOOT-1.33.0010
CPLD-12
RADIO-3.22.20.17
Jul 2, 2009

Is there a way to turn the S from on to off? Because I've read the SPL 1.33.0010 is not root-able yet.
Is there posible to open the case and do hard wired to make it flash able?

Thanks.

[dferreira]

Hum... I don't think anyone has done a hardware hack yet on the HTC Magic in order to crack the 1.33.0010 SPL :(

Maybe the best suggestion is to sell that phone and get a new one.

[Bayangan]

Hum... I don't think anyone has done a hardware hack yet on the HTC Magic in order to crack the 1.33.0010 SPL :(

Maybe the best suggestion is to sell that phone and get a new one.

IC...
Is there anyone in Australia or Singapore that know where I can buy HTC Magic that is not S-ON or not "perfected SPL"?

[oaussieo]

Phone info

SAPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I

[ricardomega]

Hi All,

My device bought from Orange in Poland, gives me this info on the fastboot:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32
Regards to all :D

[Bayangan]

Phone info

SAPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I

I think your SPL also in the "Perfected" list that cannot go on fastboot mode... :( CMIIW

[ricardomega]

Hi Amon Ra,

I've exacly the same device model as you:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32

My question is.. I read in other threat that I have to update the radio first and than the SPL 2005, right? Just checking ;)
Thanks in advance!

[HellHitZ]

Just got my Portuguese Magic. It's a 32A with HBOOT-1.33.0009 SPL.

Flashed 2005 without a problem, thanks :)

[gavindi]

Hi,

I have a 32B that I bought and it had 1.33.2005 SPL on it from the last owner. I read here on this thread that this SPL should be for the 32A.

I have also noticed a pattern that any ROMs ported from the Dream will not run on my Magic although most other report success. I end up with a boot loop as the Android splash screen.

I have a sneaking suspicion that it may have something to do with my SPL? Does this sound plausible?

Is it safe to downgrade 1.33.2005 to 1.33.2004 on a 32A?

[piwipo]

I get the verification failure when installing this ROM (No signature :( ). I read it has something to do with the wrong SPL update file. Which one should i use for a 32B device in order to mount this rom?
Thanks!

[gluebunny]

So question then.

Before starting this process (OP) does one need:

A proper 'spl'?
A proper 'radio'?
A rooted Magic?

It seems so...but there are so many docs all over but I still can't find one "stock Magic->Hero firmware".

I will shortly be getting a Rogers HTC Magic, so probably 32A and .009 SPL. I would like to go to the latest Hero 1.5 firmware that is considered 'fast'.

I just don't want to brick it so I am being paranoid. I hear the radio/SPL is the most common way to do so so I am trying to get all the steps I need to go through understood and written down in one place :)

Cheers

[xyzulu]

So question then.

Before starting this process (OP) does one need:

A proper 'spl'?
A proper 'radio'?
A rooted Magic?

Read the Sapphire Wiki, you'll find that most likely, you will not need to flash any of these.

Spend a few days reading and watching this forum, and your questions will probably be answered.

[xyzulu]

I get the verification failure when installing this ROM (No signature :( ). I read it has something to do with the wrong SPL update file. Which one should i use for a 32B device in order to mount this rom?
Thanks!

What rom? This thread is not about a rom.

[gluebunny]

Read the Sapphire Wiki, you'll find that most likely, you will not need to flash any of these.


Spend a few days reading and watching this forum, and your questions will probably be answered.

That was my impression as well from most of the tips, but then some threads talk about how you have to go to .005 SPL before doing anything. I've spent the last 3 days reading and reading.

eg: "No known Sapphire handset needs an updated SPL yet unless you want to flash a new boot image, splash screen or recovery rom to your handset - with the exception of the "Perfect SPL" Revisions listed below. Updating your SPL can be risky, so this has been listed in the Advanced section below. You do not need to update your SPL in order to install a complete ROM package"

However...everywhere I read says I should put a new recovery ROM on so that I can back up with nandroid.

The two most succinct seem to be:

http://www.karrderized.com/romguide/
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking

Or perhaps the 'fastbooting not actually flashing' is the key that I am missing? If so, then what would be the point of actually flashing a ROM on as opposed to fastbooting?

Just don't want to brick it...and so much conflicting information out there.

[flamingblue8z]

SAPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000
CPLD-10
RADIO-2.22.19.26I

Is it possible to get this HBOOT? Yes I know its the perfect spl but if I have to do a device exchange with T-Mobile it must be factory.

[MasterOSX]

Anyone have the original Tim spl plz?
Many tnx

[mgear356]

Hi Amon Ra,

I've exacly the same device model as you:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32

My question is.. I read in other threat that I have to update the radio first and than the SPL 2005, right? Just checking ;)
Thanks in advance!
damn i have the same spl as you..

i didnt flash the radio and now my magic is a brick..
i flashed enig release..

Anyways where is the link for the radio?

[maxisma]

Engineering SPL 1.33.2010 - MD5 : 865020FBDFBD9C08950076A701A8A003
Engineering SPL 1.33.2009 - MD5 : 6FE91DDD2AC591F8EE838CEA3E5F84B0
Engineering SPL 1.33.2005 - MD5 : 2B1AAA9012DC28F88C482E1B21A46FDD
Engineering SPL 1.33.2004 - MD5 : 1B49F0A53E147171E7C51F08510CF95F
SHIPMENT SPL 1.33.0009H - MD5 : 85CCC0D8F339C04E5A18A7076F321194
Engineering SPL 1.33.2004 by Crios - MD5 : 6D20EA62BDB5A6991BD80CA327C03504

Does one of these SPL's increase the /system partition more then the .2005 ?
I don't want to flash all these SPL for testing ;D

[acidburn89]

Check out my guide for jumping from 1.33.0010 to Engineering SPL with Amon_RA's ROM....

http://forum.xda-developers.com/showthread.php?p=4335330#post4335330

[woo456]

I have a HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 (Voldafone UK) device. I'm a little confused. Whick SPL should I pick?

I can use any one of them? Can I use the .2005? Should I update the radio or smth?

[Wysie]

woo456: From what I know you can use any of them. I too would like to know why I should or should not choose 2010 over 2005, etc.

[Drakonix]

Hello, I'm in the same confusion, I have a HBOOT-1.33.0004(SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 (Sfr-vodafone France), and the latest radio (RADIO-2.22.19.26I).
I need to flash just a data.img from one of my backup to my phone, but fastboot indicates me there's a error in verification of the signatures...
It seems that error is due to the security ON of the spl, and the engineering spl doesn't have this security check, am I right?
So which SPL I have to pick? And what are the side effects ( I mean for the OTA updates, i read that engineering spl make the phone unable to support OTA anymore).

[Cheesebaron]

I have a HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 (Voldafone UK) device. I'm a little confused. Whick SPL should I pick?

I can use any one of them? Can I use the .2005? Should I update the radio or smth?

The 2004 or 2005 should work fine. If you have the radio ending in 26 you are good to go.

(..) And what are the side effects ( I mean for the OTA updates, i read that engineering spl make the phone unable to support OTA anymore).

Well if you want a Engineering SPL you also might want to try out the awesome and fast roms out there, so there is no reason to get OTA updates anyways.

[Drakonix]

I want a engineering spl because after trying everything, this is the only way to get back my data from a backup, the security on prevents me from just flashing a single .img (data.img) , not a complete rom :).
I just have read the crios's spl supports OTA, is it right?
Does it is compatible with Pvt 32B?
Thanks for you're answer for what version we have to pick :).

[sevenfire]

Please help, i am stuck on HTC Magic logo without being able to fastboot:

Press the GREEN key once the update is done
Press HOME + BACK to reboot

I missed the Press the GREEN key once the update is done. I press reboot using the trackball. any ways i can get into the Fastboot? I tried all the combinations still didnt work. (mine originally 1.33.0009H, flash it with engineering SPL 2005). Thank you in Advanced.


Check out this (http://forum.xda-developers.com/showthread.php?t=548218) thread in case you have a perfected SPL (fastboot remote: not allow).

Proceed on your own risk, you might brick your phone!!!

The following SPLs "should" work on PVT 32A and PVT 32B boards :

How to flash :
Skip step 2 and boot into recovery mode instead of step 3, if you already have a custom recovery flashed!

Download the SPL of your choice and copy it to the root of your SD-card.
Download the appropriate recovery here (http://forum.xda-developers.com/showthread.php?t=530492)
Boot in fastboot mode
fastboot boot recovery-RAv1.2.0.G.img or fastboot boot recovery-RAv1.2.0.H.img
Wait a while
Choose Apply sdcard:choose zip and select the required SPL update
Press the GREEN key once the update is done
Press HOME + BACK to reboot


Download

Engineering SPL 1.33.2010 (http://rapidshare.com/files/267475618/update.Engineering-SPL-HBOOT-1.33.2010-signed.zip) - MD5 : 865020FBDFBD9C08950076A701A8A003
Engineering SPL 1.33.2009 (http://rapidshare.com/files/267475617/update.Engineering-SPL-HBOOT-1.33.2009-signed.zip) - MD5 : 6FE91DDD2AC591F8EE838CEA3E5F84B0
Engineering SPL 1.33.2005 (http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip) - MD5 : 2B1AAA9012DC28F88C482E1B21A46FDD
Engineering SPL 1.33.2004 (http://rapidshare.com/files/247838949/update.Engineering-SPL-HBOOT-1.33.2004-signed.zip) - MD5 : 1B49F0A53E147171E7C51F08510CF95F
SHIPMENT SPL 1.33.0009H (http://rapidshare.com/files/247838952/update.SHIPMENT-SPL-HBOOT-1.33.0009H-signed.zip) - MD5 : 85CCC0D8F339C04E5A18A7076F321194
Engineering SPL 1.33.2004 by Crios (http://drop.io/hidden/cjuojksggdfgvh/asset/dXBkYXRlLXNwbC1jcmlvcy0xLTMzLTIwMDQtemlw) - MD5 : 6D20EA62BDB5A6991BD80CA327C03504


Engineering SPL 1.33.2004 by Crios is actually a hex-edit of SPL 1.33.2005 to fool updates.

Original SPL list :
Please update us on any new SPLs so we can include them in this list. :)


HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 (Voldafone NL + UK + Australia)
HBOOT-1.33.0008 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (TIM (Italian))
HBOOT-1.3300.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Nordic Magic A6161)
HBOOT-1.33.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-OFF H : CPLD-12 (Belgian HTC)
HBOOT-1.33.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Greek)
HBOOT-1.33.0009 (SAPP50000) : Sapphire PVT 32A SHIP S-OFF H : CPLD-11 (Rogers)
HBOOT-1.33.0009 (SAPP50000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Rogers)
HBOOT-1.33.0010 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12
HBOOT-1.33.3004 (SAPP30000) : Sapphire PVT 32B DEV S-ON G : CPLD-10 (ION)
HBOOT-1.33.3005 from the Japanese ION


SPL Info

The G or H at the end identify if it's a Google or HTC SPL
ENG : Engineering version
SHIP : Shipment version
DEV : Development version (ION)
S-off and S-on : Security on and off (writing directly to nand or not) , most probably not SPL linked, S-on prevents you to downgrade.
PVT 32A (HTC branded) : 288MB RAM / Qualcomm MSM7200a
PVT 32B (Google branded) : 192MB RAM / Qualcomm MSM7201a
CPLD XX : What does this mean?

[gdskp]

What's new in 1.33.2010? Should we flash this instead of 1.33.2005?

[Cheesebaron]

What's new in 1.33.2010? Should we flash this instead of 1.33.2005?

It is for the phones that had the perfect SPL

[DopyG]

Is it bad to have 1.33.0010?
I just updated my danish Magic with a 05-08-2009 update and the SPL changed...

[nold-i-spolen]

There seems to be a lot of us n00bs that arn't sure wich SPL to chose.

I have
SAPPHIRE PVT 32A SHIP S-ON H
Hboot-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17

So which Engineering SPL will worke on my phone? Any?

Som one also mentioned somthing about updating the RADIO

How will i know/check which one is compatible with my phone/RADIO/ect.......i have searched in her, and googled it, but can't seem to find the answer, can somebody point me in the right direction

Thank's
Thomas

PS The Rapidshare links seems to be dead.........

[robocik]

I changed from HBOOT-1.3300.0009 (SAPP10000) on my nordic to Engineering SPL 1.33.2010, it works good :)
thanks!

[nold-i-spolen]

robocik do you mean "from HBOOT-1.33.0009"?

"it works good" with wich ROM ect.?

And what others spec's do your phone have? an updated RADIO?



Thanks!

[dcplaya]

Should I replace my "PerfectSPL" with a non-perfect? I already used the 1-touch rooting program and installed Cyanogen's Mod (Love by the way, Thanks Cyanogen!) But is a non-perfect/hacked SPL required and/or a good idea?

[chromeragnarok]

Please help, i am stuck on HTC Magic logo without being able to fastboot:

Press the GREEN key once the update is done
Press HOME + BACK to reboot

I missed the Press the GREEN key once the update is done. I press reboot using the trackball. any ways i can get into the Fastboot? I tried all the combinations still didnt work. (mine originally 1.33.0009H, flash it with engineering SPL 2005). Thank you in Advanced.

same thing had happened to me. Originally, mine was 1.33.0009G, flashed it with SPL2004. Is my phone bricked? Or is there any way to salvage my unit?

[TikiiTorch]

Is there anything wrong with running the Engineering SPL 1.33.2010 on a MT3G?

I searched quite a bit and couldn't find this answer.

If said answer already exists, I would not be offended by a stern face slap and a link.

TIA!

[hikki2000]

OP, where can i download the original SPL? Just want to flash it back if something goes wrong!

[hydronos]

on my second mytouch I did the one touch root and had the .2004 spl and now I updated to Engineering SPL 1.33.2005, I get successful update and then it asks for a reboot and when I reboot it goes back into the recovery screen and on the bottom it says formatting cache but I waited for 30 min and it still says that...is that normal? Can I go ahead and flash a new rom?

[robocik]

robocik do you mean "from HBOOT-1.33.0009"?

"it works good" with wich ROM ect.?

And what others spec's do your phone have? an updated RADIO?



Thanks!
Hi,
I had a stock Magic from 3 with stock .0009 and i've followed this thread and changed to 2010 eng.
The change was flawless and now my phone works like before, but i can flash my recovery etc. without problem.
i have not changed radio, just spl, and rom of course :)...
all roms i have tryed(cyanogen, MyHero, Hyakuro, Drizzy etc.), works good.

[ptekelly]

any news on the original SPL for 32B (uk voda)?

[hydronos]

Can i go from Engineering SPL 1.33.2005 back to 1.33.2004 or will this brick the phone -- tmobile mytouch 32b...wanting to do this because no rom will flash to the phone tried different sd cards phone just sits at mytouch screen

[lesjaw]

same thing had happened to me. Originally, mine was 1.33.0009G, flashed it with SPL2004. Is my phone bricked? Or is there any way to salvage my unit?

i miss the press Green key too..but it seems everything is ok..i can enter fastboot and flash latest AmonRa recovery...

i'm using 2010 engineering SPL now..

[lesjaw]

^ i just flash 2010 from 1009...i have the same magic with you...

[yellow_panther]

robocik do you mean "from HBOOT-1.33.0009"?

"it works good" with wich ROM ect.?

And what others spec's do your phone have? an updated RADIO?



Thanks!

Hello,
Have you updated your SPL? With wich Engineering SPL?
Did you do something special to update?

I have a # HBOOT-1.33.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Sunrise SWISS)
RADIO-3.22.20.17

thank you.

[excepti0n]

I bricked my Magic doing this. I had to get another one.

This is the setup:

- Vodafone 32B with SPL 1.33.2004
- Flashed to Engineering SPL 1.33.2010

All care was exercised, but it killed the phone.
I have a feeling that if the original SPL is 1.33.2004, one should flash with the Enginnering SPL of the same number, is this correct? I flashed 1.33.2010 because I thought it was the 'latest version'. Instead, it killed the phone.

Perhaps this useful information to anyone. I for one am not going to try to put another SPL on at any point until there are more guarantees / safety options to prevent the bricking. Too many people with bricked phones after an SPL flash. There must be something that isn't know or communicated that's causing this.

[woo456]

Well I had 0004 SPL and flashed it to 2005 SPL with no problems. Not sure about 2010 though.

[edubarr]

I've got a Rogers HTC Magic
HBOOT-1.33.0009 (SAPP50000), CPLD 12
PVT 32A, RADIO-3.22.20.17
Just flashed it with the 2005 without any issues.

[eugene373]

Just posting results for my T-Mobile MT3G.

Original
__________________
MT3G PVT32B
SPL 1.33.0006 (SAPP30000)
RADIO-2.22.19.261
May, 27 xxxxx

__________________

First I started off by doing the 1 click root from http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/

Once Rooted & with Custom Recovery, I grabbed Engineering SPL 1.33.2009 & booted in to recovery, flashed the .zip and Then flashed my new Rom.

Custom MT3G Now Reads.
_________________
MT3G PVT32B
SPL 1.33.2009 (SAPP30000)
RADIO-2.22.19.261
May, 6 xxxxx


Just want to Thank EVERYONE that made this Possible for me & everyone else to do.

Sincerely,
Eugene373

[jecuendet]

For the records, HTC Magic from Orange Switzerland:

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT 1-33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32

I have exactly the same phone, coming from Orange (French part of switzerland)
What was working exactly for you?
Which SPL?
Thanks.

[real_juvenile]

Have I a perfect SPL?

Sapphire UNKNOW 32B SHIP S-ON G
CPLD-10
RADIO-2.22.19.26I
Jul 31 2009
H-Boot-1.33.0007 (SAPP10000)
Firmware: 1.5
Baseband: 62.50S.20.17U_2.22.19.26I
Kernel: 2.6.27-00394-gc6c6056 android-build@apa27#1
Build Number: CRC24

i cant find the right spl to flash my htc magic to hero rom.

how to root?

[Beast84]

It is for the phones that had the perfect SPL

So if my phone reads this:

SAPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I

This HBOOT 1.33.2010 should work?

Edit: Do I have to follow this (http://forum.xda-developers.com/showthread.php?t=548218) procedure first to fix the perfected SPL? I'm assuming I do but just checking before I do something stupid

[Beast84]

So if my phone reads this:

SAPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I

This HBOOT 1.33.2010 should work?

Edit: Do I have to follow this (http://forum.xda-developers.com/showthread.php?t=548218) procedure first to fix the perfected SPL? I'm assuming I do but just checking before I do something stupid

Anyone?? Got anything for me?

[jbirdLt]

I just have a quick question, when using the recovery image, the thread says "Make sure your phone is rooted and that you are using an engineerings SPL!", but the recovery image is required in order to install the engeinnerings SPL. So can someone help me clarify this please. Thanks

[edubarr]

I just have a quick question, when using the recovery image, the thread says "Make sure your phone is rooted and that you are using an engineerings SPL!", but the recovery image is required in order to install the engeinnerings SPL. So can someone help me clarify this please. Thanks

If I recall correctly, that warning is for the RA 1.2.1 32A ROM, not the recovery image (link: http://forum.xda-developers.com/showthread.php?t=538645). There are no such requirements to update the SPL, but be careful since it may brick your phone.

You need an engineering SPL to flash files signed with a test key (restore your nandroid backups for example). In order to install the engineering SPL you do need to boot into a recovery image, and apply the update.zip from there (or choose the zip file in Amon_RA's 1.2.1 recovery).

[thihaz]

Just want to know this whether anyone has tried

Engineering SPL 1.33.2010 on HTC Magic 32A?

Because in the forum, some people bricked their phone easily. (e.g excepti0n)

Although it is said that

The following SPLs "should" work on PVT 32A and PVT 32B boards :

It would be great if somebody can write out clearly which SPL is for which handset.

Or we can follow how ROMs are labelled, this ROM is for 32B, that ROM is for 32A.


Another question is

MUST I flash the engineerings SPL first before flashing recovery image,RAv1.2.1H?

Best,
Thihaz

[mgorman]

are you still wondering what CPLD stands for?


http://tinyurl.com/n23sgf

[midtoad]

I have the new Rogers update from HTC and now my SPL data is:

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
June 2 2009, 17:28:28

I don't see this version yet on the first page of this thread.

[crypticc]

Have I a perfect SPL?

Sapphire UNKNOW 32B SHIP S-ON G
CPLD-10
RADIO-2.22.19.26I
Jul 31 2009
H-Boot-1.33.0007 (SAPP10000)
Firmware: 1.5
Baseband: 62.50S.20.17U_2.22.19.26I
Kernel: 2.6.27-00394-gc6c6056 android-build@apa27#1
Build Number: CRC24

i cant find the right spl to flash my htc magic to hero rom.

how to root?

I have this one too, for HTC Magic Vodafone UK (replaced a faulty phone with 0004).


Sapphire PVT 32B SHIP S-ON G
H-Boot-1.33.0007 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
Jul 31 2009


Anything I can do to grab the rom and make available to others as is missing from 1st page?

[Sheep2045]

I just received my HTC Magic from Vodafone Germany today and was unable to root it. I seem to have the same spl version as some of the above posters:

Sapphire Unknown 32B SHIP S-ON G
H-Boot-1.33.007 (SAPP10000)
CPLD-10
Radio-2.22.19.26I
Jul. 31 2009,15:49:25

I tried the goldcard method, first time I got "incorrect cid" after flashing, so I switched to another card, following that I got "wrong image" after flashing. I assume there is no root availabe yet for that version?

edit: loading cyanogen via the one click root method worked just fine.

Thanks,
Sheep2045

[str4vag]

HTC Magic (Malaysia)
Sapphire PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17

[Visti]

I'm pretty sure I had this info before flash:

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.3300.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17

This is from a Danish H-branded Magic

I can confirm that the 2010 appeared to brick my phone, but I was able to get it up again by running fastboot boot myrecovery.img prior to booting the phone and then repeatedly trying different combinations of BACK+POWER and VolDown+HOME+POWER and such, finally it just made contact and booted RA's recovery.

To clarify, I couldn't get into either recovery or bootloader prior to this. From RA's recovery I flashed the 2009 SPL and it worked from then on out. Info now:

SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17

[IFlip92]

can anyone please provide with an original 1.33.007 SPL for the magic on 32B ? :(

[b1gwest]

Flashed my Vodafone UK magic from 1.33.0004 to Engineering SPL 1.33.2005

Can now use cyanogenmod rom. Yay!

[Amon_RA]

I tried the goldcard method, first time I got "incorrect cid" after flashing, so I switched to another card, following that I got "wrong image" after flashing. I assume there is no root availabe yet for that version?


When you get these errors it means that your goldcard isn't created properly.
The one click method does NOT fix the SPL so you will still have a perfected SPL that is unable to fastboot!

[timbouk]

On the (official) Vodafone UK forums we have come across an SPL version not listed in you main list "HBOOT-1.33.0007 (SAPP10000)".

This is from a UK Vodafone handset.

We are trying to find out if this could be related the poor signals etc as the user of this spl says he has no issues with network dropouts. Has anyone come across this version?

[crypticc]

On the (official) Vodafone UK forums we have come across an SPL version not listed in you main list "HBOOT-1.33.0007 (SAPP10000)".

This is from a UK Vodafone handset.

We are trying to find out if this could be related the poor signals etc as the user of this spl says he has no issues with network dropouts. Has anyone come across this version?

Hi again. Post 147. Happy to extract if is risk-free and someone can tell me how. (Still no dropped signals).

Update: Wife returned her phone under warranty for the continuously dropping signal. Today she received supposedly reconditioned replacement handset back, with 0007 hboot. This would seem to confirm this is the new default UK rom.

Folks in U.S. on 0005 have confirmed they get the dropped signal issue, so I would also presume that between 0004 / 5 and 0007 a fix has been made.

[JLelie]

... Any change that they can be downloaded somewhere, just in case we want/need to fall back to the original stuff?

TTFN
JL

[djdavis75]

I have the following phone:

HBOOT-1.33.0008 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (TIM (Italian))

It's unlocked and I'm using it in the US.

I want to be able to debrand my phone by replacing the boot splash screen. I would also like to still be able to run my factory OS in addition to loading new ROMs to try out.

I really can not afford to brick my phone, but I'm unsure which SPL to download. I do have a Nanddroid backup of the phone.

Thanks,
David

[crypticc]

Hi again. Post 147. Happy to extract if is risk-free and someone can tell me how. (Still no dropped signals).

Update: Wife returned her phone under warranty for the continuously dropping signal. Today she received supposedly reconditioned replacement handset back, with 0007 hboot. This would seem to confirm this is the new default UK rom.

Folks in U.S. on 0005 have confirmed they get the dropped signal issue, so I would also presume that between 0004 / 5 and 0007 a fix has been made.

So, since changing phones wife hasnt dropped a signal since. Given this is same experience as me it would appear 0007 is the fix for signal always dropping.

[patoh]

I have a Vodafone AU Magic 32B and I get the No Signature, verification failed error when I try to update to update.Engineering-SPL-HBOOT-1.33.2005-signed.zip. I used the One Click root method of flashing with the RAv1.2.1G.img as a recovery image.

[skhell]

can anyone please provide with an original 1.33.007 SPL for the magic on 32B ? :(

I am also looking for it. Can we use other SPL to replace this one?

[yellow_panther]

Hello,
I have a :
HBOOT-1.33.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Sunrise SWISS)
RADIO-3.22.20.17

And I successfully upgaded to :
Engineering SPL 1.33.2005 - MD5 : 2B1AAA9012DC28F88C482E1B21A46FDD

Thank you for your good work! :)

Yanick

[garimarii]

HBOOT-1.33.0007 (SAPP10000) : PVT 32B SHIP S-ON G : CPLD-10 (vodafone germany)

this is my "new" magic,i get another one because my firtst bought April had a problem...

i cannot flash...i think its also a "perfected" SPL

[skhell]

HBOOT-1.33.0007 (SAPP10000) : PVT 32B SHIP S-ON G : CPLD-10 (vodafone germany)

this is my "new" magic,i get another one because my firtst bought April had a problem...

i cannot flash...i think its also a "perfected" SPL

I have one like yours, but its Vodafone Spain. Try the one method click, it worked ok with me:
http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/

Any way, it would be great to change that SPL, since I cant change the splash screen, any change of doing that on this phone?

[Amon_RA]

I have one like yours, but its Vodafone Spain. Try the one method click, it worked ok with me:
http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/

Any way, it would be great to change that SPL, since I cant change the splash screen, any change of doing that on this phone?

Once you have a custom recovery you can just flash the SPL's mentioned in the first post :

Copy the zipped spl you want to the root of your sdcard
boot into recovery mode (hold home while booting)
select update:zip and choose the zipped spl
apply

[skhell]

Once you have a custom recovery you can just flash the SPL's mentioned in the first post :

Copy the zipped spl you want to the root of your sdcard
boot into recovery mode (hold home while booting)
select update:zip and choose the zipped spl
apply


Hi!

That seems a great solution. I have the recovery-RAv1.2.1G.img recovery image installed, so I guess I can do that.

Which SPL should I install on my 32B?

Is this a safe precedure, or can I brick my phone? I have seen quite a few phones bricked by updating their spl...

After I update the new spl, will I have to install my custom ROM?

[maxisma]

1.33.2005 is recommended..

[jsoneng]

any1 with alternative download links? for the recovery as well as latest engineered SPL? i cant seems to dl using rapidshare. =( HELP!!

Thanks in advance

[skhell]

1.33.2005 is recommended..

Any chance of brick the phone using this SPL on my phone?

[Super Jamie]

There seems to be alot of confusion as to which SPL version to flash and a few bricked phones because of it. Could someone please answer any/all of these questions:

I assume the 00xx Original SPL versions in the original post correspond with the 20xx Engineering SPL versions, is this correct?

If your phone has an older SPL version (eg: 0004), is it possible and are you better to update to a later SPL version (eg: 0005, 0009 or 0010)?

Does anyone know what the CPLD number is relevant to? Yes I have read Wikipedia and am aware that CPLD is an acronym which means programmable hardware chip, what makes CPLD-10 different from CPLD-11 different from CPLD-12?

Are you better to stick to images that correspond to your CPLD version? (eg: xx04/xx05 for CPLD-10, xx08/xx09/xx10 for CPLD-11/12)

There has been talk of being able to backup your original shipment SPL before flashing an engineering SPL, what is the tool to do this? Where is it available?

Does flashing an Engineering SPL stop you from booting the original provider ROM?

Does flashing an Engineering SPL stop you from receiving OTA updates from your provider when using an original provider ROM?

Thankyou.

[Crios]

1.33.2005 is recommended..

but is better G version...

1.33.2005 ENG G

:-)

[skhell]

but is better G version...

1.33.2005 ENG G

:-)

And where do I get such an SPL, in this thread there is only the 1.33.2005

[dferreira]

And where do I get such an SPL, in this thread there is only the 1.33.2005
Use 2004, worked perfect for me.

[skhell]

Use 2004, worked perfect for me.

Olha, mais um tuga :)

And what was your initial spl?

[coltcha]

Hi, is it possible back to original SPL. Is this right original SPL for me - http://rapidshare.com/files/267475617/update.Engineering-SPL-HBOOT-1.33.2009-signed.zip? Can it be risky?

My current device:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.33.2005(SAPP10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009, 21:02:32

Original:
SAPPHIRE PVT 32A SHIP S-OFF H
HBOOT - 1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009, 21:02:32

Actaually i have some problems with LEDS, so i would like to try it with original SPL.

[MysticPixel]

Just got a T-Mobile (US) MT3G yesterday; it shows the following:

SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
May 27 2009,19:06:41

Just posting for data collection purposes.

[thihaz]

Hi All,

I had just flashed SPL 1.33.2005 to HTC Magic 32A as I want to flash
Amon_RA's recovery rom RAv1.2.1H to my phone.

I flashed the SPL first the way i flashed ROM.
and then I followed the instruction in this to flash recovery image to my phone permanently
http://forum.xda-developers.com/showthread.php?t=530492
:D


Because USB driver on Windows 7 is not working properly when I wanted to flash a ROM.

Now I can go into fast boot by Home + Power :D

Now I just need to put the ROM i want into SD card and flash it right away :D

Thank you all. You guys ROCK!!!!


Cheers,
Thihaz

[porzino]

Hi,

I have the original hboot.img of the HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 SPL, but I don't know how to sign with the correct certs.

I have sign with my cert and when I do the update the recovery says "signature failed".
How can I sign the SPL to make an update.zip?

Thanks

[ultraMX]

I have the original hboot.img of the HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 SPLI was searching for it sooo long...

You don't have to sign the hboot.img. You have to make an update.zip with the right update script. Then, just sign it with testkeys and flash it with a custom recovery.

//EDIT: Could you send me a PM with a Link to the hboot.img? :)

[porzino]

Hi,

Can you send me the testkeys to sign it and make the update.zip?

I don't have the keys (I have never download the source). If all is OK I will upload the update.zip :)

EDIT: Yes, yes. I only sign the update.zip with the hboot.img and the install script, not the hboot.img file.

I was searching for it sooo long...

You don't have to sign the hboot.img. You have to make an update.zip with the right update script. Then, just sign it with testkeys and flash it with a custom recovery.

[ultraMX]

You can find them there: [Link (http://ul.to/8vt3dz)]

Use that: java -jar signapk.jar testkey.x509.pem testkey.pk8 *.zip update-signed.zip

[porzino]

I think that I have it!!!!!! :)

Final checks....

[paranoidpenguin]

Does anyone tested the 1.33.2010 SPL with 32B?
Does it work? Advantages or disadvantages?

I would like to flash it but I'm afraid of brick my phone:eek:

[marc_hav]

Hello all,

I humbly ask for help. As you can see below, I have a 32B. What I don't understand is the H... I read everywhere that an H is an indication for a 32A version. I am so confused.
I would like to flash SPL to 1.33.2010 (not sure why, just to be on the latest version I guess). Are there advantages to the 1.33.2010 version ?

Just wanted to add that I have no problems flashing 32B ROMs, currently running Cyanogen 4.1.999 without any problems.

Any advice given is appreciated.

[porzino]

Hi,

Finally I have make the update.zip with the HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 SPL from Vodafone Spain and it works!!!

I have tested with the recovery-RA-dream-v1.2.2.img recovery and all it's OK.
Can I write here the link from megaupload or I have to send a PM to the post's author?

[paranoidpenguin]

@porzino:

what do you mean with "it works"?
which SPL did you flashed?

[porzino]

Hi,

I have make the update.zip with the original SPL HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 (that is pendent in the first message of the post) and the installation it's OK from the recovery recovery-RA-dream-v1.2.2.img.

Can I write here the url to download?



@porzino:

what do you mean with "it works"?
which SPL did you flashed?

[ultraMX]

Please, feel free to post the URL. I'm waiting for it so long.... :)

I'm sure AmonRA will update his first post. If you agree... ;)

[porzino]

Hi,

This is the update.zip for the original SPL HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 from Vodafone SPAIN.

I have test it with Recovery RAv1.2.2 and the installation is OK.

Enjoy it!!! ;)

http://www.megaupload.com/?d=MILNR0SH



Please, feel free to post the URL. I'm waiting for it so long.... :)

I'm sure AmonRA will update his first post. If you agree... ;)

[ultraMX]

thank you very much. :)

[crypticc]

can anyone please provide with an original 1.33.007 SPL for the magic on 32B ? :(

Just waiting for someone to point me in directions to extract from my phone, then i can provide. (still no dropped signals :-)

[thihaz]

Hi,

For those who cannot download from rapidshare,
here is the download link from mediafire , i have included all spls listed in the first post.:)

http://www.mediafire.com/download.php?nzmzxzuzcwt


Cheers :D,
thihaz

[paindoo]

I have a HTC Magic Rogers 32A PVT board. Few months back I replaced the shipped SPL with 1.33.2005 engineering spl and after that installed customsied recovery image by RAv1.2.1H, so far so good. I have been flashing various roms since then. Now, I would like to try some other roms but the developers are recommending 1.33.2009 engineering spl. Should I just get the update engineering 1.33.2009 zip file and flash it? Fundamentally can I go from one engineering spl to another engineering spl without a brick?

Any help would be appreciated.

[thihaz]

I have a HTC Magic Rogers 32A PVT board. Few months back I replaced the shipped SPL with 1.33.2005 engineering spl and after that installed customsied recovery image by RAv1.2.1H, so far so good. I have been flashing various roms since then. Now, I would like to try some other roms but the developers are recommending 1.33.2009 engineering spl. Should I just get the update engineering 1.33.2009 zip file and flash it? Fundamentally can I go from one engineering spl to another engineering spl without a brick?

Any help would be appreciated.

Hi,

I had just flashed 2005 to 2009, no problem at all but you need to re-flash the rom. I just flash 2009 spl and flash eugene's roms :D
JUST FYI :D
Cheers,
thihaz

[paindoo]

Hi,

I had just flashed 2005 to 2009, no problem at all but you need to re-flash the rom. I just flash 2009 spl and flash eugene's roms :D
JUST FYI :D
Cheers,
thihaz
Thanks I will try

[htcclay]

Hi,

I had just flashed 2005 to 2009, no problem at all but you need to re-flash the rom. I just flash 2009 spl and flash eugene's roms :D
JUST FYI :D
Cheers,
thihaz

Does this go for the 32B as well?
Thanks!

[lowrez01]

HBOOT-1.33.0006 (SAPP30000) American T-mobile MyTouch

[thihaz]

Does this go for the 32B as well?
Thanks!

not sure about 32B because I only have 32A.

[crypticc]

Hi,

This is the update.zip for the original SPL HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 from Vodafone SPAIN.

I have test it with Recovery RAv1.2.2 and the installation is OK.

Enjoy it!!! ;)

http://www.megaupload.com/?d=MILNR0SH

How did you extract this? I have 1.33.007 SPL for the magic on 32B and no-one able to tell me how to extract so I i can provide to you all to fix the dropping signal issue.

[pengages]

HBOOT 1.33.0009 (SAPP30000) - American TMOBILE Mytouch3g purchased from a TMobile authorized dealer - branded tmobile on front and back - but running VODAFONE HTC ROM - no tmobile splash, but vodafone splash instead. Then HTC Magic.

what in gods name is this phone?

[sickhate]

by instaling and engl or a diferent spl does it turn off ota updates?

[rumy]

Hi Quick question, I currently have the 1.33.2005 SPL on a 32A rogers magic and am not sure If I should upgrade to the 1.33.2010 SPL.

I dont know what the differences are between the two, but I am finding my phone to be sluggish and loosing 3G quite often.

Any suggestions on where I might find what the differences are, also how would I upgrade from 2005 to 2010 - should I follow http://forum.xda-developers.com/showthread.php?t=548379

[X-i-phoner]

Hi Quick question, I currently have the 1.33.2005 SPL on a 32A rogers magic and am not sure If I should upgrade to the 1.33.2010 SPL.

I dont know what the differences are between the two, but I am finding my phone to be sluggish and loosing 3G quite often.

Any suggestions on where I might find what the differences are, also how would I upgrade from 2005 to 2010 - should I follow http://forum.xda-developers.com/showthread.php?t=548379Im not sure what the differences are between 2005-2010 but, I know lots of people are having goodluck with 2009.

Hi,

I had just flashed 2005 to 2009, no problem at all but you need to re-flash the rom. I just flash 2009 spl and flash eugene's roms :D
JUST FYI :D
Cheers,
thihaz<<<<<<<<< 32A board, posted on prevouse page.:D

[rumy]

I did see that, just curious as to what the differences are and what value would it bring to the rom.

[X-i-phoner]

It pretty easy to flash. Give them both a try and report back your findings. I would love to know. I chose 2009 because I heard great reviews.

[widezu69]

Hi there, I recently owned a Rogers Magic and now I've replaced that with a 32B Vodafone UK Magic due to HSDPA differences on the 3G network blah blah...
What I want to know is who has had the best experiences with loading an Engineerings SPL and which SPL(s) did you use. I'm thinking either Crios's 2004 or 2009 but please post your experiences as I don't want to brick my phone.

[daeshawn]

Ok so I'm planning on changing my spl to Eng spl 2009. My questions

As you can see by my signature I have Amon_Ra's recovery so here goes.
As i've read:

step 1.Put the spl .zip file on the root of my SD card
2.use recovery to flash the zip file

ok so here's where i get scared as the last time i did this i bricked my first magic ........soooooo DO I

3.Once flashed then select reboot phone now? OR
3.Once flashed, then flash my rom i.e myhero 1.1.3 then
reboot once it's complete of course.

Please no "Read the wiki" etc as i saw a post in here that says exactly what i've been thinking ..too much conflicting information which confuses things. And when things are answered they are half answered always leaving something out. Thanks guys !!!:D

[Tony_M]

Ok so I'm planning on changing my spl to Eng spl 2009. My questions....

I went from this:

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32

To this:

SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.0009 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
May 6 2009,00:17:16

By doing this:

1.Put the spl .zip file on the root of my SD card
2.Use recovery to flash the zip file
3.Once flashed then select reboot phone

That's it. I had the ROM already in the root of my SD card in case I needed it but it turns out I didn't. Phone still working.

Running RA's v1.2.3H recovery + RA-IONv1.6.2H ROM.

[thihaz]

Ok so I'm planning on changing my spl to Eng spl 2009. My questions

As you can see by my signature I have Amon_Ra's recovery so here goes.
As i've read:

step 1.Put the spl .zip file on the root of my SD card
2.use recovery to flash the zip file

ok so here's where i get scared as the last time i did this i bricked my first magic ........soooooo DO I

3.Once flashed then select reboot phone now? OR
3.Once flashed, then flash my rom i.e myhero 1.1.3 then
reboot once it's complete of course.

Please no "Read the wiki" etc as i saw a post in here that says exactly what i've been thinking ..too much conflicting information which confuses things. And when things are answered they are half answered always leaving something out. Thanks guys !!!:D

if i'm not wrong, i rebooted my phone after spl 2009 was flashed.
actually it was accidentally rebooted bcoz we normally reboot after flashing rom :D


So i can say Reboot after flashing spl is no harm.

in my case
after reboot, go back to recovery and flash my rom

Too scary to remember the things LOL

cheers

[thihaz]

Ok so I'm planning on changing my spl to Eng spl 2009. My questions

As you can see by my signature I have Amon_Ra's recovery so here goes.
As i've read:

step 1.Put the spl .zip file on the root of my SD card
2.use recovery to flash the zip file

ok so here's where i get scared as the last time i did this i bricked my first magic ........soooooo DO I

3.Once flashed then select reboot phone now? OR
3.Once flashed, then flash my rom i.e myhero 1.1.3 then
reboot once it's complete of course.

Please no "Read the wiki" etc as i saw a post in here that says exactly what i've been thinking ..too much conflicting information which confuses things. And when things are answered they are half answered always leaving something out. Thanks guys !!!:D

if i'm not wrong, i rebooted my phone after spl 2009 was flashed.
actually it was accidentally rebooted bcoz we normally reboot after flashing rom :D


So i can say Reboot after flashing spl is no harm.

in my case
after reboot, go back to recovery mode and flash my rom

Too scary to remember the things LOL

cheers

[daeshawn]

Aight thanks alot guys ..Wish me luck lol:D

edit:alright so i flashed it..and have to say THANK YOU!!!!!!!

SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.0009 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
May 6 2009,00:17:16

[widezu69]

Hi there my new 32b arrived today with 1.33.0004 CPLD-10 S-ON radio is 2.22.19.261 which spl should I use?

[konstantinosmis]

Hi I was bricked my magic and when i send to htc they change motherboard. Now it has got 1.33.0010 spl. how can i change it an install other roms. I did all that 1st page says, but cmd says that remote not allowed. What can I do to unlock the phone. I used to have 1.33.2005 before i think

[maxisma]

Hi I was bricked my magic and when i send to htc they change motherboard. Now it has got 1.33.0010 spl. how can i change it an install other roms. I did all that 1st page says, but cmd says that remote not allowed. What can I do to unlock the phone. I used to have 1.33.2005 before i think

You have to use one click root

[tentou]

I bought a new HTC Magic. I live in Chile, south america, and they've just arrived.

Sapphire pvt 32a ship s-on h
HBOOT-1.33.0014 (SAPP50000)
CPLD-12
RADIO-3.22.23.18
Sep 2 2009, 17:42:56

I don't know how to copy it and i didin't want to change the spl before that.
I did try to fastboot a recovery rom but it said it wasnt allowed(i think this could be a perfect rom).

if you could tell me how to copy the spl, i would gladly do it and share it with everyone.

Cheers,

[tazz9690]

i'm using 2005 spl on my mt3g. I was wondering if it is safe to go from that spl and flash the 2009 spl. Thanks

[Beast84]

Can we safely go from one SPL to another?? The reason I ask is I have the problem with the blurry screen at boot but I only encountered it when I flashed a new SPL. Now I have read up on it & it looks like some people running the same ROM with different SPL's don't have the blurry screen.

Seeing how so many people had problems bricking with haykuro's DangerSPL, the SPL is something I don't wanna mess with unless I have a definate answer. So anyone wanna chime in on this?

[jfive74]

just received my replacement htc magic from rogers and it has spl 1.33.0010 (sapp50000) cpld-12, radio 3.22.20.17(one that comes with firmware update). Can someone point me to tutorial on changing spl to flash roms? Thanks.

[sickhate]

just received my replacement htc magic from rogers and it has spl 1.33.0010 (sapp50000) cpld-12, radio 3.22.20.17(one that comes with firmware update). Can someone point me to tutorial on changing spl to flash roms? Thanks.

i had too this spl ive rooted the phone using the one click root ...but just because i wasnt sure that updating the spl 1.33.2010 could work on this one....amon ra says on the begining of this post "it SHOULD work on 32a and 32b...." so..im not sure...i was hoping some one would share their experience on this one...

[thewrinklyninja]

Just a note. I can confirm that Engineering SPL 1.33.2009 works fine on a UK Vodafone Magic 32B.

[porzino]

How did you extract this? I have 1.33.007 SPL for the magic on 32B and no-one able to tell me how to extract so I i can provide to you all to fix the dropping signal issue.

Sorry, but I don't understand you. What do you exactly want to do?

[Enigma87]

Sorry, but I don't understand you. What do you exactly want to do?

Porzino creo que te esta preguntando como puede sacar el SPL 1.33.007 de su Magic para proporcionarnos la solucion al ¿problema de disminucion de la señal?

Hi Amon-RA


The Vodafone Original SPL (0004) backup done by porzino, has been tested on my magic and works perfectly!!!

Before (Crios SPL)

SAPPHIRE PVT 32B SHIP S-OFF G
HBOOT-1.33.2004 (SAPP10000)
CPLD-10
RADIO-2-22-19-261
Apr 9 2009,23:30:40

After (Porzino's Original Backup)

SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0004 (SAPP10000)
CPLD-10
RADIO-2-22-19-261
Apr 9 2009,23:29:17


It will be great if you can add this one to the SPL Collection

Link: http://www.megaupload.com/?d=MILNR0SH

[Epedemic]

SAPPHIRE PVT 32A SHOP S-ON H
HBOOT-1.76.0007 (SAPP10000)
CPLD-12
RADIO-6.35.08.27
AUG 4 2009, 19:43:30

New one from the 3.03 taiwan update. How to go to eng. spl from this?

[luminoso]

Thank you.
Updated to Engineering SPL 1.33.2010 in Magic 32A without any problems :-)

Edit:
With SDHC 8GB class 4, one fat32 partition and with RA-magic-v1.2.3H

[charnsingh_online]

What partitions are there on htc magic, coz i flashed the first splash and still have a second htc magic splash, tried splash2, splash etc, none worked

[Steven627]

Hi i'm newbie here...

how can i flash my voda magic

any guide for me ?

thx so much...!!

[WebghostDK]

Engineering SPL 1.33.2010

Works on 32B Vodafone UK :)
Thanks

[jfive74]

just received my replacement htc magic from rogers and it has spl 1.33.0010 (sapp50000) cpld-12, radio 3.22.20.17(one that comes with firmware update). Can someone point me to tutorial on changing spl to flash roms? Thanks.

Solved!
Originally Posted by hcadiz View Post
Rather than using the Gold Card method, I found this method to be easier:

http://theunlockr.com/2009/08/29/how...-in-one-click/

Once you have Amon's recovery installed, then you just:

1) Copy your choice of SPL into your sdcard
http://forum.xda-developers.com/showthread.php?t=548218
ROM v2.53.707.2 (Engineerings SPL v1.33.2010) - MD5 : F9674D19BE5F949D0D9DC99714D210E3
Be sure that you name the SPL file as "update.zip" in your sdcard

2) Boot into the recovery
power + home key

3) Apply the "update.zip" from the Recovery menu

4) Reboot

[WebghostDK]

just received my replacement htc magic from rogers and it has spl 1.33.0010 (sapp50000) cpld-12, radio 3.22.20.17(one that comes with firmware update). Can someone point me to tutorial on changing spl to flash roms? Thanks.

Solved!
Originally Posted by hcadiz View Post
Rather than using the Gold Card method, I found this method to be easier:

http://theunlockr.com/2009/08/29/how...-in-one-click/

Once you have Amon's recovery installed, then you just:

1) Copy your choice of SPL into your sdcard
http://forum.xda-developers.com/showthread.php?t=548218
ROM v2.53.707.2 (Engineerings SPL v1.33.2010) - MD5 : F9674D19BE5F949D0D9DC99714D210E3
Be sure that you name the SPL file as "update.zip" in your sdcard

2) Boot into the recovery
power + home key

3) Apply the "update.zip" from the Recovery menu

4) Reboot


Thanks, i will give this a try now
Ok i just get a
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip (bad)

[5[Strogino]]

Thanks, i will give this a try now
Ok i just get a
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip (bad)

What's size of your update.zip?

[WebghostDK]

Downloaded this: 2.53.707.2_-_sappimg.zip
Renamed it to: update.zip
FileSize: 59,5 MB

[kirkusss]

Hello,

I need to take my magic to the repair center. In order to do that i need to restore the original SPL.
It was HBOOT-1.33.0010 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Vodafone Romania)
Can someone help me with it?

Thank you

[Altembas]

Works great on 32B german vodafone
SAPPHIRE PVT32B SHIP S-ON G
HBOOT-1.330007 (SAPP10000)
CPLD-10
RADIO 2.22.19.26I
Jul 31 2009.15.49:25

[skhell]

Hi guys!

I want to replace the SPL of my 32B Vodafone Spain.

Here is the info of my boot:

SAPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0007 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I

I talked to a few people with the same SPL that had successfully installed the Engineering SPL 1.33.2010 and the Engineering SPL 1.33.2004 using the recovery method.

Between this two SPLs, which one is better and what's their main difference?

[Crios]

Sorry, but I don't understand you. What do you exactly want to do?
we need a method to "extract" a SPL from sapphire 32b.

for this, is necessary a boot.bin or recovery.bin with mtd6 enabled into kernel.

tks.

:-)

[skhell]

we need a method to "extract" a SPL from sapphire 32b.

for this, is necessary a boot.bin or recovery.bin with mtd6 enabled into kernel.

tks.

:-)

I am also interested on making a backup of my SPL, can you elaborate on that?

[Crios]

I am also interested on making a backup of my SPL, can you elaborate on that?

I found this...

http://www.telesphoreo.org/pipermail/g1-hackers/2008-December/000091.html

and same info on Hero section in this forum...

[superkikim]

Download

Engineering SPL 1.33.2010 (http://rapidshare.com/files/267475618/update.Engineering-SPL-HBOOT-1.33.2010-signed.zip) - MD5 : 865020FBDFBD9C08950076A701A8A003
Engineering SPL 1.33.2009 (http://rapidshare.com/files/267475617/update.Engineering-SPL-HBOOT-1.33.2009-signed.zip) - MD5 : 6FE91DDD2AC591F8EE838CEA3E5F84B0
Engineering SPL 1.33.2005 (http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip) - MD5 : 2B1AAA9012DC28F88C482E1B21A46FDD
Engineering SPL 1.33.2004 (http://rapidshare.com/files/247838949/update.Engineering-SPL-HBOOT-1.33.2004-signed.zip) - MD5 : 1B49F0A53E147171E7C51F08510CF95F
SHIPMENT SPL 1.33.0009H (http://rapidshare.com/files/247838952/update.SHIPMENT-SPL-HBOOT-1.33.0009H-signed.zip) - MD5 : 85CCC0D8F339C04E5A18A7076F321194
Engineering SPL 1.33.2004 by Crios (http://drop.io/hidden/cjuojksggdfgvh/asset/dXBkYXRlLXNwbC1jcmlvcy0xLTMzLTIwMDQtemlw) - MD5 : 6D20EA62BDB5A6991BD80CA327C03504

Sorry for the dumb question but could you please clarify what are these for ? I mean, on what criteria should we choose one or another ?

[ceas909]

ok i got ..


MT3G PVT32B
SPL 1.33.0006 (SAPP30000)
RADIO-2.22.19.261

so can this SPL be replaced?? ived check every where cant find anything jus that its a hard SPL to hack.... any info plz...


update: sorry i found what i was looking for anyone wondering wat i was heres the thread http://forum.xda-developers.com/showthread.php?t=570659&highlight=hboot

[BrunoRafael]

I have a stock vodafone uk magic 32b with 1.6, it does not allow fastboot so how do i flash engineering spl? Also is crios1.33.2004 spl a good choice for uk vodafone 32B?

[JackMagic]

I have a stock vodafone uk magic 32b with 1.6, it does not allow fastboot so how do i flash engineering spl? Also is crios1.33.2004 spl a good choice for uk vodafone 32B?

I used relentless rooter to fastboot into recovery first, which works.

Also i flashed with 1.33.2004 non-crios and it worked fine.

[rhizon]

Sapphire PVT32B Dev S-on G
Hboot-1.33.0006 (sapp30000)
CPLD-10
Radio-2.22.19.26I
May 27, 2009,22:15:49

[tazz9690]

I have the 2005 SPL. What is the difference among the other engineer spl's? Also, is it worth it to upgrade to a different spl and is it safe for that matter? I don't want to do it to brick my phone. I am perfectly fine with my current one, I am just curious to see if there any advantages of having a different SPL than the 2005. Thanks.

[tazz9690]

I have the 2005 SPL. What is the difference among the other engineer spl's? Also, is it worth it to upgrade to a different spl and is it safe for that matter? I don't want to do it to brick my phone. I am perfectly fine with my current one, I am just curious to see if there any advantages of having a different SPL than the 2005. Thanks.
Anyone know that can help me out on this one? I have been curious about this for a long time.

[saqibs]

i have the same query as tazz

[Amon_RA]

I have the 2005 SPL. What is the difference among the other engineer spl's? Also, is it worth it to upgrade to a different spl and is it safe for that matter? I don't want to do it to brick my phone. I am perfectly fine with my current one, I am just curious to see if there any advantages of having a different SPL than the 2005. Thanks.

There are no differences as far as I know, I'm using the 2005 version too.

I listed all the available SPL's because sometimes you'll need a specific SPL version in order to flash something (when the update script checks for a specific HBOOT version).

[5[Strogino]]

Anyone know that can help me out on this one? I have been curious about this for a long time.

Don't do abnormal things. You have engineering SPL already. NOT need anything else to change...

[sim-value]

I have this SPL:
HBOOT-1.33.0010 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12

Is this:
Engineering SPL 1.33.2010
The right one for me ?

[magicdroid]

Checked my Belgian Proximus HTC, and it has "S-ON":

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32

[tazz9690]

There are no differences as far as I know, I'm using the 2005 version too.

I listed all the available SPL's because sometimes you'll need a specific SPL version in order to flash something (when the update script checks for a specific HBOOT version).
Thanks. Nothing better than to hear it from the creator of the threat himself. You're the man Amon_RA!

[jordizzle2315]

I'm trying to switch my spl from 1.33.2010 to 1.33.2005 and whenever I reboot the phone after applying the .zip, the update wont apply itself, it gets to the "formatting cache" dialogue, then it stops and returns to the recovery options. Anyone have a solution?