[KITCHEN+ROM][WWE][FRA][P3600I] [08.10.2009]WM6.5.x Build 23060 (cv93+oggi) [Archive]

the.decoy

30th June 2009, 03:25 AM

This thread is for the P3600i variant of Chanvi93's Trinity Kitchen for all. For full details and history of this Kitchen please refer to his original thread:
http://forum.xda-developers.com/showthread.php?t=513421

Whenever Chanvi releases a new Trinity Kitchen, I will try to post the P3600I ported version on here soon there after (or as soon as I can get it done), along with a few of the the more popular "EXT Builds" (package bundles) of that release precooked into ROMs.

================================================== =======
CAVEATS:

If you have never installed a new ROM before, GO HERE FIRST (http://forum.xda-developers.com/showthread.php?t=399779) (or else you brick your phone)
Kitchen requirements: XP/Vista 32bit with Microsoft .NET Framework 2.0 (http://www.microsoft.com/downloads/details.aspx?familyid=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5) Service and Microsoft .NET Framework 3.0 (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=10cc340b-f857-4a14-83f5-25634c3bf043) Service Pack 2, also Microsoft Visual C++ 2005 (http://www.microsoft.com/downloads/details.aspx?familyid=32BC1BEE-A3F9-4C13-9C99-220B62A191EE) Redistribuable and 2008 (http://www.microsoft.com/downloads/details.aspx?familyid=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF) from MS official site.
P3600i ONLY - These Kitchens & ROMs are NOT for the Trinity/DoPod/P3600 models (see original Trinity thread (http://forum.xda-developers.com/showthread.php?t=513421))

IMPORTANT! Builds after 21900 have the ADC driven network auto-config so you will need to disable any call to Configuration_Network.cab in your SDConfig.txt. Otherwise you get 2 different prompts to setup your network provider (which doesn't break anything it is just redundant :rolleyes:)
================================================== =======
UPDATES (COM3 Branch builds): 26-10-2009

Sorry I haven't had time to incorporate these into a full kitchen release (and ROMS from that) ... but here are the last two major COM3 builds as update archives for the ROM & SYS folders of the existing kitchen:

Kitchen Update (XIP+SYS only):
WM6.5.x QVGA WWE+FRA P3600I+TRINITY 23081.5.3.0 (http://www.mediafire.com/file/kbjtx4mymgz/QVGA_23081_ROM+SYS_LANG-0409-040C.7z) [COM3 branch]

Kitchen Update (XIP+SYS only):
WM6.5.x QVGA WWE+FRA P3600I+TRINITY 23071.5.3.0 (http://www.mediafire.com/file/znmmnzmtqm4/QVGA_23071_ROM+SYS.7z) [COM3 branch]

NOTE: The CHome and BROWSEIE packages are still in the SYS-COMMON folder. Just remove the older copies in the EXT folders and disable either/both of them in the kitchen if you are doing a Non-titanium or IE6 build.

I will try and get a proper kitchen and roms ready for download as soon as I can :)

================================================== =======
RE-RELEASE (23060.5.3.0): 08-10-2009

Sorry for the false-start everyone :o but there were some major issues that I have resolved with 23060 so I felt it best to just re-package and replace.

Following changes to 23060:

Now using native GWES (have instead rebuilt theme files to mitigate "PushButton" bug)
Fixed phantom "MSAlarms" shortcut and many other Start Menu icon glitches from new initflashfile.dat
Changed MortScript registration to run once (only) during first boot AutoRun (no more pop up on every boot)
Disabled ASyncKiller and AutoDLGkiller as they were not saving as much memory as they were using (autoHibernate still included)
Modified the Visual Kitchen HTCRT scripting to properly support WWE or FRA nbh builds (and support for Splash1 & Splash2 screen nb files)

NOTE: With the new MortScript install, you will get that familiar popup on the first boot just AFTER Date/Time/Password config and BEFORE the SDAutoRun starts, so it will wait until you tap it to continue and start installing cabs from your SDConfig.txt (it will eventually time out and continue by itself but that will take like 1-2min - best to just tap it yourself)

Kitchen:
WM6.5.x QVGA WWE+FRA P3600I Kitchen 23060.5.3.0 (http://www.mediafire.com/?m0yunzycymo) [COM3 branch]

ROMs:
WWE_23060_P3600I_6IETIT (http://www.mediafire.com/?omjjhxn2ryc) (IE6 with Titanium, includes TitaniumWeather and ATFavePeople)

WWE_23060_P3600I_6IEQMTIT (IE6 with QuickMenu and Titanium, includes TitaniumWeather and ATFavePeople)
*Note: Although new Start button is on bottom bar but you must still press top left corner for QM start menu

WWE_23060_P3600I_6IEMANTIT (http://www.mediafire.com/?oyvhj0w2jhl) (IE6 Full with M2D and Titanium, includes TitaniumWeather and ATFavePeople)

WWE_23060_P3600I_8IETIT (http://www.mediafire.com/?zcmkommyz3z) (IE8 with Titanium, includes TitaniumWeather and ATFavePeople)

WWE_23060_P3600I_8IEMANTIT (http://www.mediafire.com/?mn4tjzjjdac) (IE8 Full with M2D and Titanium, includes TitaniumWeather and ATFavePeople)

Screen caps:

http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi1.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi2.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi3.jpg
http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi4.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi5.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi6.jpg

================================================== =======
RELEASE (23060.5.3.0): 02-10-2009 (RE-RELEASED - packages have been updated and replaced)

I have ported the latest COM3 build (23060) into the kitchen, replaced the dialler with Diamond style canvas (to fix invisible "dialing number" bug) and used the latest initflashes.dat (new MSFT startmenu layout changes).

================================================== =======
RELEASE (23041.5.3.0): 10-09-2009

This is my P3600i release of Chanvi's 23041 Trinity Kitchen. I have used my own VK1.8.1/HTCRT kitchen but the SYS is CHanvi's and EXT is pretty much still the same as previous releases. I have added some "Mods" under EXT\Shared\ that are kinda necessary in this new 6.5.1 UI, and I rebuilt the Applications panel in Titanium using the layout from CLauncher instead (Chanvi had been recycling the WelcomeCenter panel but this seems to have issues now). I also did some extra module->file conversion to free up a little more virtual memory in Slot 0 (if you don't know what that means, don't worry about it :o )

Be warned, we are now into the COM3/COM4 branches which means WM 6.5.x and all the chunky new UI and fonts that go with it.

NOTE: IF YOU TRY TO CHOOSE ANY OF THE THEMES OTHER THAN CLASSIC BLUE IT WILL BREAK THE NEW 6.5.x UI
(MSFT are changing the UI slightly every build right now and they are only bothering to make Classic Blue work properly. Search XDA and you can also find a few custom themes that have been rebuilt to suit 2304x builds.)

AND
FIX (for pixel glitches at bottom of lockscreen):
Copy these CPR files (http://forum.xda-developers.com/attachment.php?attachmentid=226520&stc=1&d=1252670681) into \Windows\

Kitchen:
WM6.5.x QVGA WWE+FRA P3600I Kitchen 23041.5.3.0 (http://www.mediafire.com/?nodld5emmnw) [COM3 branch]

ROMs:
WWE_23041_6IETIT_P3600I (http://www.mediafire.com/?3mwz4mdkdxy) (IE6 with Titanium, includes TitaniumWeather and ATFavePeople)

WWE_23041_6IEMANTIT_P3600I (http://www.mediafire.com/?umtrmguumdz) (IE6 Full with M2D and Titanium, includes TitaniumWeather and ATFavePeople)

WWE_23041_8IEULITE_P3600I (http://www.mediafire.com/?kefammdqldt) (IE8 UltraLite)

WWE_23041_8IEMANTIT_P3600I (http://www.mediafire.com/?wwgmz0hrqku) (IE8 Full with M2D and Titanium, includes TitaniumWeather and ATFavePeople)

================================================== =======
HISTORY BELOW THIS ARCHIVED

Due to forum post char limit, release history below this point is archived here (http://forum.xda-developers.com/attachment.php?attachmentid=226522&stc=1&d=1252671335).

the.decoy

30th June 2009, 03:28 AM

It is quite simple to create your own EXT Build with the Kitchen, and even include CABs of your own into that build.

First you need to convert your CAB into an OEM Package Folder to include it in the kitchen.

Download the Kitchen Converter (http://xda.b4pjs.co.uk/Kitchen%20Convertor.zip) bundle (by Da_G) and unzip it.
Copy your CAB file(s) (eg: "My_App.cab") into that Kitchen Converter folder (you can do multiple cabs)
Run CAB2NEWKITCHEN.bat and you will get a folder that is the unpacked version of each of your CAB files. eg: folder called "My_App" (which has an app.dat file with file/dir layout and app.reg with registry keys for the app).

Then you need to grab the latest Kitchen, make a new EXT build folder (rom recipe) and add your "My_App" folder to it.

Download the Latest (eg: 21900) Kitchen for P3600i and unzip it with 7zip
Go into the folder Kitchen-WWE+FRA_21900_P3600I\EXT\P3600i\
Make a copy of whichever build folder is the same name as the precooked rom you wanted to add your cab(s) to, and name it accordingly.
eg: copy "6IEMANTIT" and rename it "6IEMTMYAPP" (call it whatever you want but probably best keep it under 10 char)
Get the "My_App" package folder we made earlier and copy it into your new ext build folder (inside subfolder "P3600i_External_Packages").
eg: copy "My_App" into "Kitchen-WWE+FRA_21900_P3600I\EXT\P3600i\6IEMTMYAPP\P3600i_ External_Packages\"

Now you just need to run the Kitchen and build your ROM. If you are using Vista/Win7 then there might be some issues here ... I think you can do it if you run the kitchen as Admin, but there are other threads that will explain that. Also, you might need to temporarily disable runtime antivirus shielding (my builds would randomly crash right at the end otherwise).

Go to the Kitchen-WWE+FRA_21900_P3600I folder and run erviuskitchen.exe
Choose DEVICE = P3600I
Choose Language = 0409 (or 040C for Francais)
Choose EXT Build = 6IEMTMYAPP (or whatever you have called your build)
Click "Create ROM" button on the top left of window

If the build succeeds you will end up with the ROM Update utility being started and prompting you to plug in your phone, etc (just like when you download a pre-cooked rom). You can proceed straight into flashing your new rom or hit cancel.

The cooked ROM (and update utlity) will all be in the RELEASE_P3600I folder of the kitchen. Copy that whole folder somewhere and rename it accordingly (eg: "WWE_21815_6IEMTMYAPP_P3600I" ). There is your own cooked rom.

Good luck :)

================================================== =====================

EXT Packages: (for adding into your own EXT builds)
EXTPKG_Showaco_TitaniumWeather_v4.2_decoy_inc_Icon s (http://www.mediafire.com/?zmzonnchmdj)

EXTPKG_Titanium_CAnalogClock_0.7b (http://forum.xda-developers.com/attachment.php?attachmentid=210054&d=1248846018)

EXTPKG_Enable_Comm_PowerMgmt (http://www.mediafire.com/?wnqgywyy2eh)

EXT_Packages_Collection (http://www.mediafire.com/?14myltbyjyy) (all existing Visual Kitchen EXT packages from cv93+oggi releases - as of 09-Jul-2009)

================================================== ===========================

Mapping table of additional PICTURE resources in Chanvi's customised bronzeres.dll (for editing CHome applications links)
1000 = AudioManager
1001 = HTCAlbum
1002 = VOIP/SIP
1003 = BlueTooth
1004 = RecycleBin (ClearTemp?)
1005 = FootPrints
1006 = SatDish (QuickGPS?)
1007 = Hibernate
1008 = JBed Java
1009 = WinRAR
1010 = Backlight
1011 = LockDevice
1012 = WiFi
1013 = Camera
1014 = CommManager
1015 = USB Link
1016 = NaviPanel
1017 = AdvancedConfig
1018 = PHM regedit
1019 = Total Commander
1020 = psShutXP

.

the.decoy

30th June 2009, 03:29 AM

STABLE WM6.5 BUILDS (P3600i)

================================================== =======
RELEASE (21900 Service Pack 1): 09-07-2009

21900 ROMs assume that you have a UC (SDConfig.txt on Storage Card) setup that will install and run Configuration_Network.cab (http://www.mediafire.com/?mzj0wtemmbe) (auto config provider settings) [NOT NEEDED AFTER 21900]. Including P3600i_BT_Fix.cab (http://www.mediafire.com/?wzim53nzo2z) is also recommended.

An example SDConfig.txt (http://forum.xda-developers.com/attachment.php?attachmentid=203009&stc=1&d=1247104695) is attached to first post.

Kitchen:
WM6.5 QVGA WWE+FRA P3600I Kitchen 21900.5.0.20 SP1 (http://www.mediafire.com/?gyiykmwwiie) [5.0.20 branch]

ROMs:
WWE_21900_SP1_6IEQMTIT2_P3600I (http://www.mediafire.com/?ojyg2ianzdw) (IE6 Full with QuickMenu and Titanium, includes TitaniumWeather and ATFavePeople)

WWE_21900_SP1_6IEMANTIT2_P3600I (http://www.mediafire.com/?vhm2mleewl2) (IE6 Full with M2D and Titanium, includes TitaniumWeather and ATFavePeople)

WWE_21900_SP1_6HSUIMAN_P3600I (http://www.mediafire.com/?bzyermmxmdr) (IE6 with Homescreen PlusPlus UI and M2D)

WWE_21900_SP1_8IEULITE_P3600I (http://www.mediafire.com/?nexyzhgmmno) (IE8 UltraLite)

WWE_21900_SP1_6IEULITE_P3600I (http://www.mediafire.com/?zmj4ryrmnht) (IE6 UltraLite)

WWE_21900_SP1_6IEMANTIT_P3600I (http://www.mediafire.com/?imzr2nbyyey) (IE6 Full with M2D and Titanium, original recipe)

================================================== =======

desolateone

30th June 2009, 10:57 AM

I am currently testing this ROM 6IEQMTIT.

Error 1 - Task Manager cannot be opened. either is not signed.....
Error 2 - HTCAlbum cannot be opened...

the.decoy

30th June 2009, 03:09 PM

I am currently testing this ROM 6IEQMTIT.

Error 1 - Task Manager cannot be opened. either is not signed.....
Error 2 - HTCAlbum cannot be opened...

Yes, you are correct ... there appear to be a few links (on "Applications" panel) to apps that are not installed: cleanRAM, HTC Album, HTC Audio Manager & YouTube (plus the link to PIM Backup has a bad path in it).

The Task Manager link in the root of the Start Menu has a bad path but the one in "Start Menu\Tools" is working correctly.

I will repost the mxip_WWE_CHome_Programs.provxml tomorrow (to fix the path for PIM Backup ... and maybe replace other broken links with apps that are installed).

As for the missing apps ... you could install them via cabs or (in the kitchen) add their oem package folders to the 6IEQMTIT build folder and recook the rom.

I think I will probably recook 6IEQMTIT myself (fixing all these things) and just update the link ... stay tuned ;)

Thanks for the feedback!

the.decoy

1st July 2009, 09:30 AM

New version of 6IEQMTIT rom is now available (see first post).

Contains all fixes discussed so far and has Titanium plugins ATFavePeople & TitaniumWeather, and CHome Editor added into the build.

Hope you like it :)

desolateone

1st July 2009, 01:30 PM

Cannot get MMS to work, keeps telling me it cannot use the connection, even though my connection is set correctly.

the.decoy

1st July 2009, 01:50 PM

Cannot get MMS to work, keeps telling me it cannot use the connection, even though my connection is set correctly.

oh, ok ... don't normally use MMS so I hadn't tested. Will check it out.

EDIT: Sorry, MMS seems to be working just fine for me :confused: ... have you definitely got your provider settings in there?

desolateone

1st July 2009, 09:09 PM

I must be stuffing some setting up...

I'll keep trying to get it going.

the.decoy

2nd July 2009, 02:00 AM

I must be stuffing some setting up...

I'll keep trying to get it going.

Doesn't the Connection Setup auto-config run when you first boot after install?
(you can re-run it manually from Settings->Connections->Connection Setup )

Or does it not include your particular telco Operator? What country/operator are you on?

the.decoy

2nd July 2009, 08:29 AM

Fix for Titanium Weather (forecast/radar) added. See first post.

Enjoy!

ssamth2003

3rd July 2009, 04:34 AM

Hello,
did you try version 23001.5.0.60 that Chanvis already post on his kitchen? http://forum.xda-developers.com/showthread.php?t=513421

the.decoy

3rd July 2009, 04:50 AM

Hello,
did you try version 23001.5.0.60 that Chanvis already post on his kitchen? http://forum.xda-developers.com/showthread.php?t=513421

Yes, I am in the middle of converting it right now :)

However ... I am reading some disturbing feedback in there about SMS/email messages not opening and such :eek: ... delaying my release of the P3600I version until I see what Chanvi says about it.

I still have a little bit of work left to do with making all of my own tweaks for the QMTIT2 build that I will include. I had just got them all nicely polished with 21900 and now the CHome launcher structure has changed (now running apps from CLinks instead of CWelcomeCenter) so I have to repeat the process for the new CLinks reg keys and CPR files.

Without these changes, the modified version of TitaniumWeather 4.2 will not show up. Also the new apps panel is all in french right now so I would have to edit it anyway, lol :D

I might even post a pre-cooked test NBH just to get some feed back before I post up the Kitchen (it is kinda annoying that the current 21900 Kitchen I am hosting requires so many "fixes" to be applied ... depending on how 23001 turns out I am tempted to post a "SP1" release of the 21900 Kitchen just to tidy things up).

While I am still at this stage, does anyone have any specific requests for the Kitchen, ext builds and/or precooked roms?

RedBux

3rd July 2009, 02:49 PM

Hi
Just flashed 6IEQMTIT2 and fixed with TitaniumWeather.mscr

Why and how to get rid the "face plate (flashed warning)" every time after reboot. The indication as follows "MortScript v4.3b5" discription as ".mscr and .mortrun extensions registered. Please run any .mscr/.mortrun file or read the manual.
(c) Mirko Schenk 2005-2009

How to fix this?

chanvi93

3rd July 2009, 03:10 PM

Hi RedBux
Try delete Mortscript.lnk in Windows-StartUp , i think it need only one time to activate , but not sure , so move this .lnk to another place fir try .

the.decoy

3rd July 2009, 03:54 PM

Hi RedBux
Try delete Mortscript.lnk in Windows-StartUp , i think it need only one time to activate , but not sure , so move this .lnk to another place fir try .

Yeah, thats it. Thanks Chanvi.

Sorry RedBux, I forgot to mention that splash page as I was so caught up in fixing the xml scraper.

RedBux

3rd July 2009, 04:30 PM

Hi RedBux
Try delete Mortscript.lnk in Windows-StartUp , i think it need only one time to activate , but not sure , so move this .lnk to another place fir try .

Yeah
Thanking you so much
thats it..........TQ

desolateone

4th July 2009, 05:02 AM

Doesn't the Connection Setup auto-config run when you first boot after install?
(you can re-run it manually from Settings->Connections->Connection Setup )

Or does it not include your particular telco Operator? What country/operator are you on?

I'm Australia - Telstra - NextG.

The connection auto-config did not appear to run, and there is no auto select Telstra option or similar.

the.decoy

4th July 2009, 07:13 AM

I'm Australia - Telstra - NextG.

The connection auto-config did not appear to run, and there is no auto select Telstra option or similar.

Have you got Configuration_Network.cab (http://www.mediafire.com/?mzj0wtemmbe) set to run from the SDConfig.txt on your Storage Card?

It was always something that the cv93+oggi roms had in the "postinstall" folder (many versions ago) and I still run that on all my roms (just hadn't thought to mention it in this thread .. sorry :o ).

If you haven't got that cab then you need to run it. It will setup all the gprs/mms network config for your carrier.

desolateone

4th July 2009, 08:49 AM

Have you got Configuration_Network.cab (http://www.mediafire.com/?mzj0wtemmbe) set to run from the SDConfig.txt on your Storage Card?

It was always something that the cv93+oggi roms had in the "postinstall" folder (many versions ago) and I still run that on all my roms (just hadn't thought to mention it in this thread .. sorry :o ).

If you haven't got that cab then you need to run it. It will setup all the gprs/mms network config for your carrier.

Unfortunately I did not have that .cab set to go, but have installed it now and MMS is back running.

Other than that, this ROM is fast, low memory footprint, well set out and a pleasure to use.

I would love to see the tweaks from Schap's Advanced Config, under Power Management applied as part of upcoming ROMs that you may generate.

This is due to the ROM "appearing" to be a little battery hungry until you apply the power settings like AsyncMAC, IrSIR, PPTP and L2TP to enabled.

hnd

6th July 2009, 09:18 AM

can i use this rom for my P3600 ?

the.decoy

6th July 2009, 09:51 AM

can i use this rom for my P3600 ?

No, you need to use a rom cooked in the Trinity Kitchen (http://forum.xda-developers.com/showthread.php?t=513421) that this P3600i Kitchen is derived from.

I assume the reason you ask is because you are looking for a precooked 21900 rom? Which build was it that you are after? UltraLite? QuickMenu+Titanium?

the.decoy

6th July 2009, 03:01 PM

Unfortunately I did not have that .cab set to go, but have installed it now and MMS is back running.

Other than that, this ROM is fast, low memory footprint, well set out and a pleasure to use.

I would love to see the tweaks from Schap's Advanced Config, under Power Management applied as part of upcoming ROMs that you may generate.

This is due to the ROM "appearing" to be a little battery hungry until you apply the power settings like AsyncMAC, IrSIR, PPTP and L2TP to enabled.

Thanks, I m checking them out now. Looks like a good idea to me.

Sorry to anyone anxiously waiting on me for 21900_SP1 or 23001 ... I have been extremely busy this last few days and not had a lot of cooking time to spare (and what time I did spend on 23001 was not fruitful) :(

I will definitely get them both ready later this week. Try to bare with me [EDIT: lol, make that 23003 :D omg Chanvi is fast! ]

I the meantime I would still love to hear any other input or suggestions for the kitchen/roms ;)

ssamth2003

7th July 2009, 04:30 AM

Thanks, I m checking them out now. Looks like a good idea to me.

Sorry to anyone anxiously waiting on me for 21900_SP1 or 23001 ... I have been extremely busy this last few days and not had a lot of cooking time to spare (and what time I did spend on 23001 was not fruitful) :(

I will definitely get them both ready later this week. Try to bare with me [EDIT: lol, make that 23003 :D omg Chanvi is fast! ]

I the meantime I would still love to hear any other input or suggestions for the kitchen/roms ;)

yeh..just about to tell you that Chanvis had very fast on 23003.......keep continue a great job The Decoy..cheer!!!

ssamth2003

7th July 2009, 06:37 AM

The decoy,
Can you add your work (on the 1st post) to the Kitchen? thks in advance

the.decoy

7th July 2009, 07:03 AM

The decoy,
Can you add your work (on the 1st post) to the Kitchen? thks in advance

Yeah, already am actually. That is the 21900_SP1 I am referring to.

I have also reworked the TitaniumWeather EXT package to have all 6 of the weather Icon packs preloaded too.

Fingers crossed I will have time to upload it later today.

bbdai

8th July 2009, 04:20 PM

Just wondering.
How stable are the kitchen ROMs? Do they have the HR issues of previous 6.1 ROMs?

the.decoy

9th July 2009, 03:09 AM

Just wondering.
How stable are the kitchen ROMs? Do they have the HR issues of previous 6.1 ROMs?

They vary from version to version (especially since Chanvi was doing builds from all the different "branches" of 6.5 dev tree). Not sure what the "HR Issue" was ... memory management has been the biggest problem in the most recent few releases.

Anyway, as far as I can tell 21900 seems very stable and fast so far. I have just rebuilt an SP1 release of it (see first post) as I think it is a real keeper :)

Maybe some of the other users can provide better "comparison" testimonials ...

the.decoy

9th July 2009, 03:30 AM

The SP1 release of 21900 is now ready (see first post).

It is pretty much just a rollup of all the fixes that I posted for 21900, but I wanted a clean 21900 kitchen/rom release that we could rely on as a STABLE version, that didn't need anything done to it prior to use.

As requested by desolateone, I have added an EXT package to my TIT2 variants which enables the Comm power management options (hopefully squeeze a bit more battery life out of it).

My EXT builds also have a new TitaniumWeather 4.2 package that comes with all 6 Icon packs pre-installed. However I will also post this package separately so that anyone who wants to add it to a Visual Kitchen build can do so.

Oh, and I also cooked an IE8 UltraLite ROM this time too (just in case anyone was missing that).

Sorry for all the delays but I have been very busy with work and other RL commitments (still am), so I am getting this stuff done whenever I get time.

Now that this 21900 SP1 is sorted out, I can move on to porting 23003 (which I am sure plenty of you are keen for). I hope it works out better than 23001 because my attempt at that release was a disaster (which I refused to upload here because I would just end up getting abuse from the people who tried it :p ).

desolateone

9th July 2009, 05:20 AM

Good job the.decoy, love your efforts in keeping my old PDA like a new toy!

bbdai

9th July 2009, 06:38 AM

the.decoy

9th July 2009, 06:49 AM

Thanks for the reply the.decoy.
Well whenever I tried one of the 6.1 roms they would hard reset after a day or two when I did a soft reset.
I'll give your 21900 SP1 a go when I have time on the weekend, I'm still using Schaps 6.0, but I would like to know other users' experiences.
Thanks for keeping the p3600i up to date.

Yeah I think I had that happen a few times on some of the 6.1 roms I used (before I started playing with the cv93+oggi roms) ... but I think Chanvi resolved a lot of that random p3600i corruption a few versions ago when he took the XIP (and nk.exe and other bits) from a new oem HTC p3600i rom and grafted them into the Kitchen.

Now the only problems we have appear to be entirely 6.5 related (usually memory management) ... but 21900 seems great so far :)

robinbb

11th July 2009, 06:59 AM

Doesn't the Connection Setup auto-config run when you first boot after install?
(you can re-run it manually from Settings->Connections->Connection Setup )

Or does it not include your particular telco Operator? What country/operator are you on?

This is very strange: Settings/Connections/Connection Setup is not there after flashing liteSP1. No auto-config for Vodafone Aussie. Task Manager shows connmgr.exe running OK.
EDIT. Installed again and now seems to be OK. Strange!

the.decoy

13th July 2009, 02:37 PM

This is very strange: Settings/Connections/Connection Setup is not there after flashing liteSP1. No auto-config for Vodafone Aussie. Task Manager shows connmgr.exe running OK.
EDIT. Installed again and now seems to be OK. Strange!

Yeah I am guessing that for some random reason the Storage Card didn't respond fast enough, and ended up getting mounted to "Storage Card 2" ... which then breaks the path to Configuration_Network.cab in your SDConfig.txt (lol, in fact it probably breaks the path to SDConfig.txt in the first place :rolleyes: )

Had it happen to me once with one of the 218xx roms ... same story, another install and all was good.

Sorry I haven't got much done on the 2300x branch yet ... there seem to be constant developments on Da_G's thread so I am just watching closely (trying to avoid doing anything that will just get superseded within 48hrs). 21921 might be more worth investigating but again I am being cautious and scoping the feedback from the Raphael guys first. I'm afraid I just don't have the free time to punch out releases quite as fast as Chanvi, so I am trying to make sure the ones I do produce are useful.

My 21900 continues to work flawlessly so far ... I gave it the first cleanRAM run in over 3 days tonight (but only because it was idling at 14M free and I knew there was at least another 2M that could be released :D ).

robinbb

14th July 2009, 12:52 AM

Yeah I am guessing that for some random reason the Storage Card didn't respond fast enough, and ended up getting mounted to "Storage Card 2" ... which then breaks the path to Configuration_Network.cab in your SDConfig.txt (lol, in fact it probably breaks the path to SDConfig.txt in the first place :rolleyes: )

Had it happen to me once with one of the 218xx roms ... same story, another install and all was good.

Sorry I haven't got much done on the 2300x branch yet ... there seem to be constant developments on Da_G's thread so I am just watching closely (trying to avoid doing anything that will just get superseded within 48hrs). 21921 might be more worth investigating but again I am being cautious and scoping the feedback from the Raphael guys first. I'm afraid I just don't have the free time to punch out releases quite as fast as Chanvi, so I am trying to make sure the ones I do produce are useful.

My 21900 continues to work flawlessly so far ... I gave it the first cleanRAM run in over 3 days tonight (but only because it was idling at 14M free and I knew there was at least another 2M that could be released :D ).

I like the thoughts - chill out and watch! I also have a Diamond and enjoy swapping between - but always with Mobile Shell to avoid any confusion. The Diamond is good when wearing a suit - but I always go back to the 3600 when I want a ring to wake the dead (Old Phone). I still have not been able to use MTTY to clean out the 3600 - I think that I am missing the correct Task for the OliPro version that I am using - most of the other commands are OK.

tchoklat

20th July 2009, 03:18 AM

the.decoy

20th July 2009, 03:42 AM

Hi, Really happy with this ROM. I was having the odd reboot issue with my 6.1 ROM. This is better, slower though more stable. I have three issues though. How do I change the apps that are listed under each of the 'headings, such as Applications, Personal, Programs etc.

First disable "Windows Default" (Chome) on the Today Items list - you can't change anything while it is running. Then you can edit the existing app links by either:
- using CHome Editor (under "Utilities" in Start Menu) or
- write all of your changes to the CHome registry into a .provxml file (example (http://forum.xda-developers.com/attachment.php?attachmentid=200546&stc=1&d=1246325119)) and then import that using the Advanced Config app (under "Tools" in Start Menu).

Clicking on add/remove in Favourites does not work!

Yeah, that Favourites tab in CHome only works properly in the IE8 roms. I keep it active on CHome simply to give a launcher tab for IE6 (the favourites still work fine once inside IE). We opt for IE6 because most people prefer the leaner performance of it versus the slower IE8.

Same goes for the widgets (eg: MS Weather, Money, etc), they are IE8 dependant also.

I could not get data autoconfigured with NeXtG I had to do it manually. I am using http://www.mediafire.com/?vhm2mleewl2 ROM (6IEMANTIT2).

Hmmm, I assume you have got the Configuration_Network.cab (http://www.mediafire.com/?mzj0wtemmbe) set to install in your SDConfig.txt (as per instructions above)?

If not you can still install that cab at any time later and run the auto-config then (or if it is already installed there will be a "Connection Setup" app under Start Menu -> Connections ).

Glad you like the rom. :)

ssamth2003

24th July 2009, 04:30 AM

Hi the Decoy.
can you get in to this :

http://forum.xda-developers.com/showthread.php?p=4033581

I think it should helpful to our trinity speedy. Cheer!!!

the.decoy

24th July 2009, 05:05 AM

Hi the Decoy.
can you get in to this :

http://forum.xda-developers.com/showthread.php?p=4033581

I think it should helpful to our trinity speedy. Cheer!!!

No worries, I will check it out ... although I must say that I am going to tread cautiously with it as our "i" models tend to be very picky about filesystem drivers, etc. Also, the concept sounds very memory hungry to me and our phones are already desperate for RAM as it is. Not quite sure how reading files from SD Card would be faster than from internal flash ... I guess lowering the number of large files in the Windows dir will have some benefit ...

Have you tried adding it to any of our existing kitchens?

Anyway, I will check it out as soon as I get a chance. I have been busy building a new P3600I Kitchen that runs on the newer ervius visual 1.6 and does the final NBH assemble using HTCRT instead of NBHUtil (i.e. no more of those damn "Platformbuilder" crashes when cooking).

Making the P3600I mods to the kitchen didn't take too long but I have also been learning how to port Da_G's Fuze builds into it (which has been quite a steep learning curve :eek: )

I finally got it all working last night and I am beta testing the (crazy "fat" UI) 21928 build on my phone right now. :D

With all that sorted out, I plan to go back and convert Chanvi's last release (23003) and post it on this thread ... then I might make a new thread for the Da_G ported kitchens/roms I am making. Hopefully get a few things uploaded by the end of this weekend.

ssamth2003

24th July 2009, 10:17 AM

No worries, I will check it out ... although I must say that I am going to tread cautiously with it as our "i" models tend to be very picky about filesystem drivers, etc. Also, the concept sounds very memory hungry to me and our phones are already desperate for RAM as it is. Not quite sure how reading files from SD Card would be faster than from internal flash ... I guess lowering the number of large files in the Windows dir will have some benefit ...

Have you tried adding it to any of our existing kitchens?

Anyway, I will check it out as soon as I get a chance. I have been busy building a new P3600I Kitchen that runs on the newer ervius visual 1.6 and does the final NBH assemble using HTCRT instead of NBHUtil (i.e. no more of those damn "Platformbuilder" crashes when cooking).

Making the P3600I mods to the kitchen didn't take too long but I have also been learning how to port Da_G's Fuze builds into it (which has been quite a steep learning curve :eek: )

I finally got it all working last night and I am beta testing the (crazy "fat" UI) 21928 build on my phone right now. :D

With all that sorted out, I plan to go back and convert Chanvi's last release (23003) and post it on this thread ... then I might make a new thread for the Da_G ported kitchens/roms I am making. Hopefully get a few things uploaded by the end of this weekend.

Actually I'm not really get how to make it work, read and read and read..but still fail :(
Sound interest of your work, waiting to test it :) thks in advance
for the

RedBux

26th July 2009, 02:00 AM

the.decoy

26th July 2009, 06:51 PM

23003 kitchen and roms are built.:D files uploading now.

I will edit post with links as soon as they are online (few hrs).
thanks for your patience :o

the.decoy

27th July 2009, 03:28 AM

Kitchen and roms are ready.

Enjoy! :D

robinbb

27th July 2009, 05:54 AM

Kitchen and roms are ready.

Enjoy! :D

Oh the pleasure! SP1 was nice and stable. The 23003 was clean and easy + MTTY ran OK (a first time ever for me thanks to the new proceedure).
(Lite + adding SPB Mobile Shell, TomTom, OziExplorer)
Thanks SO much!

the.decoy

27th July 2009, 06:34 AM

Cool, glad you like it :)

Yeah, I still think 21900 is a bit leaner than this build (memory usage) ... but this one has some of the new flashy UI changes that are coming in on the 23xxx releases (whilst still being reasonably stable).

Sigh ... :(
Unfortunately I have just found a mistake I made in the CLinks ("Applications") plugin on Titanium. The Google Maps link is on "Page3" but I somehow forgot to use \\ slashes in the "PICTURES" regkey for the icon (so it fails to create due to syntax) and so that link isn't showing up.

Can be fixed very easily though:
[IN KITCHEN] (eg: for 6IETIT)
EDIT EXT\P3600i\6IETit\P3600i_External_Packages\yyyy-CHome-xCustomize\0409\app.reg
[HKEY_LOCAL_MACHINE\Security\CHome\DefaultSettings\ CLinks\Page3]
"PICTURES"="\\Windows\\GoogleMaps.png"
"GUID"="{2F710F22-9F19-43fa-8F35-9927D246B078}"
"SK2URL"="\\Program Files\\GoogleMaps\\GoogleMaps.exe"
"SK2TEXT"="Launch"
"TEXT1"="Google Maps"
"TITLETEXT"="Google Maps"
"TEXT2"="Google Maps"
"ACTIONURL"="\\Program Files\\GoogleMaps\\GoogleMaps.exe"

[IN THE RUNNING ROM]

Disable CHome ("Windows Default" in Today Items)
Open RegEdit
Add the PICTURES value to both of these 2 regkey locations:
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome\CLinks \Page3]
"PICTURES"="\\Windows\\GoogleMaps.png"
[HKEY_LOCAL_MACHINE\Security\CHome\DefaultSettings\ CLinks\Page3]
"PICTURES"="\\Windows\\GoogleMaps.png"

Other than that, the only other issue is that I forgot to add HTC Album and Audio Manager to 6IETIT and 6IEQMTIT, so that is why there are broken links for those two apps in the CLinks launcher. Just install them manually if you use the rom, or copy these EXT package folders (from 6IEMANTIT) if you are cooking them in the kitchen:

PACKAGE_Iolite_AudioManager
PACKAGE_Jade_HTCGesture
PACKAGE_Jade_Album

Sorry about these clumsy mistakes ... it was very late last night when I finished putting the kitchen together :o

the.decoy

27th July 2009, 04:01 PM

Sigh ... :(
Unfortunately I have just found a mistake I made in the CLinks ("Applications") plugin on Titanium. The Google Maps link is on "Page3" but I somehow forgot to use \\ slashes in the "PICTURES" regkey for the icon (so it fails to create due to syntax) and so that link isn't showing up.

Can be fixed very easily though:

... and now it has been :D

NEW DOWNLOAD LINKS in first post (http://forum.xda-developers.com/showpost.php?p=4047768&postcount=1)

CHome files have been fixed, Album & Audio have been added to Titanium builds and while I was at it I took the chance to put the full WM6.5 ringtones collection back into the SYS. (lol, they are all just more variations on that same wm jingle ... but at least there's a few more to choose from :p)

New copy of kitchen and roms is online. Links updated.

Apologies to the dozen or so people who already downloaded them from the previous uploads.

ssamth2003

28th July 2009, 08:30 AM

the.decoy

28th July 2009, 08:43 AM

Hello,
Chanvi is very fast as he launch 23009 already. i try to combine the version to 23003 with not succeeded :(
Also, pls help me the decoy to add this today plugin as default http://forum.xda-developers.com/showthread.php?t=511483 i'm like it very much but after follow instruction there i still fail. don't know why? anyway, i'm keep trying and searching to get it work.

thks in advance.

lol, yeah I know ... he uploaded 21921, 23008 & 23009 today. Sorry I should have had 23003 ready for you weeks ago but was distracted with kitchen modifications. Anyway I am doing 21921 right now and hope to have all three up very shortly. I won't have had a chance to test them or anything so will have to rely on you guys to find bugs :p

I will have a quick look at the Analog Clock too ... what happened when you tried to add it?

PS: I keep meaning to ask ... doesn't your CHT9110 run on Trinity roms instead of p3600i? Or do you just harvest my changes from the kitchen and then apply them to the original Trinity kitchen?

the.decoy

28th July 2009, 10:20 AM

Hello,
Also, pls help me the decoy to add this today plugin as default http://forum.xda-developers.com/showthread.php?t=511483 i'm like it very much but after follow instruction there i still fail. don't know why? anyway, i'm keep trying and searching to get it work.

thks in advance.

It works ok from the cab install ... except that width/height settings for the Weather icon are not quite right in the config it adds to Titanium CPR files. Easy fix, just take correct width/height from "CurrentIcon" image in the TitaniumWeather config in same CPR file :)

Are you trying to build it into the kitchen and set as default clock?

I can see 2 problem with that:

EXT package will not add config to Titanium_XXXxXXX.cpr files
The CHome plugins list and order will be overridden by CHome_Customise EXT package

... on top of that, the more obvious issue will be that the Kitchen converter is putting the package files/folders under a subfolder called "0.7b". Just take that subfolder, rename and use as ext package folder to put in kitchen.

Here (EDIT: attachments moved to first post) is a zipped EXT package of CAnalogClock and a pair of CPR files to replace those in "yyyy-CHome-xCustomize\0409\files\". With just these you will cook rom with normal clock as default but CAnalogClock installed and you can change it to default in the CAnalogClock Options app under "Utilities".

If you really want CAnalogClock as default from cooked rom, you will need to edit (in kitchen) the CHome plugins order regkeys in yyyy-CHome-xCustomize\0409\app.reg and replace "CCLock" with "CAnalogClock" (and also move it to front of the order).
eg:
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome]
"Plugins"="CAnalogClock;CMyPhotos;CMusic;CWelcomeCenter;CPhon e;CVoicemail;TitaniumWeather;ATFavePeople;CHome;CT ext;CEmail;CAppointments;CLinks;Settings;CHomeFavs ;CWindowsLive"
"ExtensibilityXML"="<Plugins Order=\"CAnalogClock;CMyPhotos;CMusic;CWelcomeCenter;CPhon e;CVoicemail;TitaniumWeather;ATFavePeople;CHome;CT ext;CEmail;CAppointments;CLinks;Settings;CHomeFavs ;CWindowsLive\" CPRFileName=\"Titanium\" DisplayStyle=\"Titanium\" />"
"DefaultXML"="<Plugins Order=\"CAnalogClock;CMyPhotos;CMusic;CWelcomeCenter;CPhon e;CVoicemail;TitaniumWeather;ATFavePeople;CHome;CT ext;CEmail;CAppointments;CLinks;Settings;CHomeFavs ;CWindowsLive\" CPRFileName=\"Titanium\" DisplayStyle=\"Titanium\" />"

Now that I am aware of this plugin I will include the ext package and make the necessary changes to all my Titanium CPR files in the kitchens.

However, I will leave the normal clock as default so that turning on CAnalogClock is at the discretion of the users :)

ssamth2003

29th July 2009, 04:09 AM

The problem on CAnalog it was not stable, freeze, sometime the clock getting big and small (pop up) ?? dont know why try to edit mscr but still not really get it work.

For My CHT9110 , Yeh. I'm using same HTC P3600i but i bough from Taiwan (model name there is CHT9110) actually i'm happy to try both 3600 rom (with 401 header change) and 3600i rom.

ssamth2003

29th July 2009, 04:10 AM

It works ok from the cab install ... except that width/height settings for the Weather icon are not quite right in the config it adds to Titanium CPR files. Easy fix, just take correct width/height from "CurrentIcon" image in the TitaniumWeather config in same CPR file :)

Are you trying to build it into the kitchen and set as default clock?

I can see 2 problem with that:

EXT package will not add config to Titanium_XXXxXXX.cpr files
The CHome plugins list and order will be overridden by CHome_Customise EXT package

... on top of that, the more obvious issue will be that the Kitchen converter is putting the package files/folders under a subfolder called "0.7b". Just take that subfolder, rename and use as ext package folder to put in kitchen.

Here (attached) is a zipped EXT package of CAnalogClock and a pair of CPR files to replace those in "yyyy-CHome-xCustomize\0409\files\". With just these you will cook rom with normal clock as default but CAnalogClock installed and you can change it to default in the CAnalogClock Options app under "Utilities".

EDIT: Just noticed some pretty screwed up layout values in those CPR settings (whoever provided the QVGA layout was in a real hurry or didn't actually havea QVGA device). Have done my best to fix any elements that were half off the screen in the Protrait res, but the Landscape layout is totally wack! Anyway the CPR zip file attached has been updated to use better 240x320 cpr.

If you really want CAnalogClock as default from cooked rom, you will need to edit (in kitchen) the CHome plugins order regkeys in yyyy-CHome-xCustomize\0409\app.reg and replace "CCLock" with "CAnalogClock" (and also move it to front of the order).
eg:
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome]
"Plugins"="CAnalogClock;CMyPhotos;CMusic;CWelcomeCenter;CPhon e;CVoicemail;TitaniumWeather;ATFavePeople;CHome;CT ext;CEmail;CAppointments;CLinks;Settings;CHomeFavs ;CWindowsLive"
"ExtensibilityXML"="<Plugins Order=\"CAnalogClock;CMyPhotos;CMusic;CWelcomeCenter;CPhon e;CVoicemail;TitaniumWeather;ATFavePeople;CHome;CT ext;CEmail;CAppointments;CLinks;Settings;CHomeFavs ;CWindowsLive\" CPRFileName=\"Titanium\" DisplayStyle=\"Titanium\" />"
"DefaultXML"="<Plugins Order=\"CAnalogClock;CMyPhotos;CMusic;CWelcomeCenter;CPhon e;CVoicemail;TitaniumWeather;ATFavePeople;CHome;CT ext;CEmail;CAppointments;CLinks;Settings;CHomeFavs ;CWindowsLive\" CPRFileName=\"Titanium\" DisplayStyle=\"Titanium\" />"

Now that I am aware of this plugin I will include the ext package and make the necessary changes to all my Titanium CPR files in the kitchens.

However, I will leave the normal clock as default so that turning on CAnalogClock is at the discretion of the users :)

Thks for your work out, i will try today.

the.decoy

29th July 2009, 04:22 AM

The problem on CAnalog it was not stable, freeze, sometime the clock getting big and small (pop up) ?? dont know why try to edit mscr but still not really get it work.

Oh, not sure I can help much with that. I must say that it seems very memory hungry and a bit buggy for me too :(

For My CHT9110 , Yeh. I'm using same HTC P3600i but i bough from Taiwan (model name there is CHT9110) actually i'm happy to try both 3600 rom (with 401 header change) and 3600i rom.

Ok, so you do need roms with the 0x401 boot (i.e. p3600i) ... I was just confused because the XDA device db says 9110 is same spec as Trinity/p3600 (0x400 boot devices).

Thks for your work out, i will try today.

Actually you should hold off for another hour ... I am rewriting those CPR files again right now. The QVGA layout is just rubbish and so I am fixing it. It will still be buggy and a memory hog, but at least everything will fit on the screen :D

I want to finish off this CAnalogClock thing so I can get back to those new kitchen ports ... and check out this new QGVA Manilla for WM6.5 :cool:

the.decoy

29th July 2009, 08:00 AM

Actually you should hold off for another hour ... I am rewriting those CPR files again right now. The QVGA layout is just rubbish and so I am fixing it. It will still be buggy and a memory hog, but at least everything will fit on the screen :D

Done. See first post.

I have even come up with a 320x240 layout that looks reasonable.

However, I am inclined to include the package in the kitchen but set it as disabled in .erv rom configs (because it is so buggy and slow). I think the combo of it and Weather is just too much bloat on the system. :rolleyes:

Depends on how much you prefer that flashy clock page to the default one I guess :)

ssamth2003

30th July 2009, 05:19 AM

Oh, not sure I can help much with that. I must say that it seems very memory hungry and a bit buggy for me too :(

Ok, so you do need roms with the 0x401 boot (i.e. p3600i) ... I was just confused because the XDA device db says 9110 is same spec as Trinity/p3600 (0x400 boot devices).

Actually you should hold off for another hour ... I am rewriting those CPR files again right now. The QVGA layout is just rubbish and so I am fixing it. It will still be buggy and a memory hog, but at least everything will fit on the screen :D

I want to finish off this CAnalogClock thing so I can get back to those new kitchen ports ... and check out this new QGVA Manilla for WM6.5 :cool:

no no, CHT9110 = HTC P3600i while CHT9100 = HTC P3600 / D810

ssamth2003

30th July 2009, 08:02 AM

the.decoy

30th July 2009, 10:16 AM

Hi the decoy,
Try to flash with 6IETIT success but after reboot on the 2nd screen i got white screen freezed. I think some thing need to correct in the kitchen.

(The same when i Try to combine 23009 to your kitchen)

So you are getting through the whole first boot then? stylus alignment? setting date? running autorun? then freeze on next boot?

How are you trying to "combine" 23009 to the kitchen? what folders? from what other kitchen?

I will have newer kitchens up soon anyway but it sounds like you have recurring issue ...

the.decoy

31st July 2009, 02:51 AM

Have finally caught up to Chanvi again ... not much sleep last night but the are 4 new kitchens uploaded (see first post). :D

Haven't had enough time to cook roms of them all, but I have at least cooked some from 21921 as this has the cool new Inertial Scrolling feature to play with.

If anyone needs specific 5.3.0 branch (230xx) roms cooked, just post a request and I will cook them on demand.

23016 has a few new EXT packages for various customisations/fixes by Chanvi ... you will have to investigate yourself as I have not had a chance to :o

I have added one of my own to all of these kitchens which turns on the Taskbar Battery indicator via .provxml (regkeys), because it was getting annoying not knowing if it would be there or not in the latest builds.

Cheers! :)

the.decoy

31st July 2009, 06:59 AM

Instructions and required files for 21928-23016 hybrid added to first post.

Enjoy! :)

RedBux

31st July 2009, 05:41 PM

Dearest The.Decoy
I am using 6IEMANTIT SP 1 @ 21900 -still
Though I had had downloaded the subsequent versions still I KIVed the flashing, now it seemed that you had flooded with all those latest versions from Chanvi.

By the way thanking so much for an efforts done.

My question is......now which one is the best among all those good roms?
Propose one...good one for me.

Thanking you in advance
Regards

tchoklat

2nd August 2009, 11:02 AM

Just a question.

I have one of your wm6.5 ROMs (WWE_21900_SP1_6IEMANTIT2_P3600I) and the battery drain is really bad. Battery flat in under 24 hrs with minimal use. Which ROM has better battery life associated with it?

Just an addit! What is the difference between a ROM and a Kitchen. I assume you make a ROM in the kitchen Duh! Though the.decoy's signature says he runs a kitchen as a ROM :

HTC P3600i
ROM: CV93+Oggi 23016 Kitchen (21928 Hybrid: MD1 StartMenu enhancements)
Radio-Rom: 1.56.70.11
SPL: Hard-SPL Olipro 3.2

tchoklat

the.decoy

4th August 2009, 07:06 AM

Hi guys, sorry to leave you hanging like that ... I go completely offline most weekends and yesterday I was way too busy with work to check XDA :o

Dearest The.Decoy
I am using 6IEMANTIT SP 1 @ 21900 -still
Though I had had downloaded the subsequent versions still I KIVed the flashing, now it seemed that you had flooded with all those latest versions from Chanvi.

By the way thanking so much for an efforts done.

My question is......now which one is the best among all those good roms?
Propose one...good one for me.

You're welcome :)

Unfortunately I have been so busy making kitchens that I have not really had much chance to test/compare any of these builds.

lol, I have personally been running that 23016/21928 hybrid since Friday and it was only yesterday that I finally realised the IE6 in it was completely broken :eek:

So I'm afraid that, right this minute, the only one I would personally consider "stable" is indeed 21900.

That said, I have only had a single lockup from 23016 (today - it just never came back from "screen off" mode when I went to use it at lunch) and it has been many builds since I last had a hard reset or corruption ... so really we are just talking about UI bugs and memory management now.

When it comes to memory, not one of the builds I have tried lately runs as lean as 21900. The whole 23xxx (COM3) branch seems to be more memory hungry in general and all of the recent 21xxx builds are so full of wacky new UI changes that it is hard to compare them :rolleyes:

Sorry I know this doesn't really answer your question ... just brain-dumping whatever info I have gathered on these builds.

Just a question.

I have one of your wm6.5 ROMs (WWE_21900_SP1_6IEMANTIT2_P3600I) and the battery drain is really bad. Battery flat in under 24 hrs with minimal use. Which ROM has better battery life associated with it?

Hmmm, I suppose 21900 did rip through the battery a bit quickly ... although I must say that I long ago gave up on expecting more than a full day out of my p3600i battery :(

However I have found that having any kind of constant internet (ie: push Exchange syncing, or email on 5min check, etc) use will nail the battery in crazy short time (seriously I even tried one of those chunky HD batteries with bulging case backing and everything - it only buys you an extra 1-2hrs).

Better ROMs? I don't really have any proper metrics to base it on but I am pretty sure the 23xxx builds seem better optimised for battery consumption ... they just chew up more memory instead :p

Just an addit! What is the difference between a ROM and a Kitchen. I assume you make a ROM in the kitchen Duh! Though the.decoy's signature says he runs a kitchen as a ROM :

ROM: CV93+Oggi 23016 Kitchen (21928 Hybrid: MD1 StartMenu enhancements)
tchoklat

oh, sorry for the confusion ... I kinda took my cue from Chanvi's sig there.

Indeed my phone is running on a ROM. I just specify that Kitchen in my sig to indicate that it is a ROM I cooked myself from that kitchen (as opposed any particular ROM that can be downloaded as is).

Most of the time I am using exactly the same NBH as one of the ones that I have uploaded but it is always possible that I have enabled/disabled certain apps in the kitchen to test something ...

I guess I should maybe preface it with "ROM: Custom cooked with ..." :cool:

tchoklat

5th August 2009, 12:53 AM

the.decoy

5th August 2009, 03:16 AM

Thanks for that, it helps. One final query. I am having issues with syncing. What settings on the phone are required to allow the update to run properly as I am unable to detect the phone with activesync? Attempting to activate WMStorage I get the error, "Can't switch to mass storage USB driver, error 1F".

Which ROM is that you are having this problem with?

I am still on 23016 and can confirm the WMStorage error (although I have no idea when this started because I never used it before today).

However ActiveSync is working perfectly well for me :confused:

tchoklat

6th August 2009, 05:09 AM

Which ROM is that you are having this problem with?

I am still on 23016 and can confirm the WMStorage error (although I have no idea when this started because I never used it before today).

However ActiveSync is working perfectly well for me :confused:

I am using the version you list in your sig - the latest hybrid. My IE also does not launch!?!

Tony

the.decoy

6th August 2009, 05:29 AM

I am using the version you list in your sig - the latest hybrid. My IE also does not launch!?!

Yeah I am looking into the IE thing ... just real busy with work is all. :(

I am hoping to do something about it later today as I want to get it working for myself too.

Also, can you help me with some bug tracking? I need to know when did WMStorage last work for you (what build)?

the.decoy

6th August 2009, 11:48 AM

OK, I think I know what the problem was with WMStorage.

IIRC the 1F error is basically a filesystem locking issue (open files, etc) ... so I took a guess that it might be the CachePIE5_Messaging_SD.cab causing this.

Disabled installing that cab in my SDConfig.txt and the ROM I just installed has a working WMStorage now.

:D ... speaking of which ... if you are feeling really brave you are welcome to try out the 23022 test ROM I cooked (complete port from Da_G SYS/XIP sources, cooked in a new ervius 1.8.1 kitchen).

This thing has a crazy 219xx influenced UI and I have not killed IE8 or anything. My first compile was a dud and needed several modules converted to files ... seems ok now though ... TRY IT AT YOUR OWN RISK ;)

Anyway, scary warnings aside .. here is a the link:

WWE_23022_P3600I_decoy-test (http://www.mediafire.com/?xzwwzj4bhnd)

PS: Watch out for the "Zoom" function on the touch screen ... it's a bit hypersensitive, lol

tchoklat

6th August 2009, 03:15 PM

OK, the problem is the installation of the .cab. Now that it is installed how do I uninstall it to get WMStorage working again? Without it working I cannot sync to flash a new Rom!

TONY

the.decoy

7th August 2009, 02:43 AM

OK, the problem is the installation of the .cab. Now that it is installed how do I uninstall it to get WMStorage working again?

The cab contains nothing more than a set of registry changes which set the IE cache/cookies/history destination (and inbox attachments folder) to be folders under the path \Storage Card\

Here is a .provxml (http://forum.xda-developers.com/attachment.php?attachmentid=213446&stc=1&d=1249605460) that will reverse all the changes it makes. Unzip it into your My Documents folder. Open up AdvancedConfig, go to Menu->Import provisioning XML and choose "remove_cacheie_msg_sdcard.provxml"

When you go to exit AdvancedConfig, choose "Yes" to do a soft reset.

After boot up try WMStorage again. The open file locks should now be gone.

Without it working I cannot sync to flash a new Rom!
TONY

:confused:
The WMStorage issue has nothing to do with ActiveSync problems ...

What happens if you 3-button into HardSPL and connect the usb cable? (have you tried a different usb cable?)

I assume that when you flash new roms you are using the ROMUpdateUtility.exe while the phone is in the HardSPL (tri-colour) screen?

Sorry, I have heard of a few people having broken activesync issues with various roms (not this one) but it is never the rom itself, usually something is messed up on the handset (or the the PC or the usb cable).

ssamth2003

7th August 2009, 03:42 AM

the.decoy

7th August 2009, 03:47 AM

oh oh oh!!!!! 23022 latest version??? you're become master the decoy, will try today. thks for sharing. http://forum.xda-developers.com/images/icons/icon14.gif

lol, not quite there yet mate ... but thanks :o

Seriously though, this build has some major bugs. It is stable enough and functional but dear lord the UI changes will make your heads spin. I welcome anyone who wants to join me in testing it out but I just want to make sure you are forewarned that it is definitely not perfect :eek:

For more specific descriptions of the funky UI in 23022 check out Da_G's thread (http://forum.xda-developers.com/showthread.php?t=544445) :D

ssamth2003

7th August 2009, 08:11 AM

the.decoy

7th August 2009, 08:13 AM

have yet flash to 23022....i like it, even the UI still need time to live with..but one thing the pointing (using stylus touchthe screen then the pointing appear zoom out dialog with pointer) made me mad some time..it may be a bug i guess.
this version fast and stable as the decoy said..recommend for test. :D

Actually I have just cooked another 23022 with the magnifier disabled ... hopefully got the start menu screen corruption (top bar) fixed too.

I am just flashing it right bow but if it fixes the topbar I will upload in the next few minutes.

EDIT: Nope ... just ditching HTC Task Manager didn't fix the topbar ... looks like I have to get rid of 1% batt icon too :(
Back to the kitchen I go :P

ssamth2003

7th August 2009, 08:24 AM

oh..thats call Magnifier!!!!! we dont need it really.
pls share to me after you confirm, i willing to try..thks in advance.

the.decoy

7th August 2009, 08:29 AM

oh..thats call Magnifier!!!!! we dont need it really.
pls share to me after you confirm, i willing to try..thks in advance.

Yeah, I know. lol, it is pretty insane to think you would need to magnify anything in this build - everything is already HUGE :eek:

You can kill it right now with this regkey if you want:
[HKEY_LOCAL_MACHINE\System\GWE\MAGNIFIER]
"Enable"=dword:0

I will definitely get another rom uploaded today ... although I am also experimenting with removing all of CHanvi's visual customisations (since MS is adding so many of their own) ... so don't be too put off by start menu folders not having icons and the CHome select bar going back to monochrome. Is all part of the process of me building up my own kitchen :D

ssamth2003

7th August 2009, 08:56 AM

thks for very quick respond..seem we both are work on this rom only lOl....
If i'm not wrong, after 23009 the start menu (2nd screen) can not push & Hold to come up with bring to top, to bring the icon up to top of others. newer rom this function lost...:P

the.decoy

7th August 2009, 09:08 AM

Thanks ssamth, with 2 of us testing this build we will hopefully find any bugs a bit faster :)

thks for very quick respond..seem we both are work on this rom only lOl....
If i'm not wrong, after 23009 the start menu (2nd screen) can not push & Hold to come up with bring to top, to bring the icon up to top of others. newer rom this function lost...:P

Actually they have even included that in this build too :)

As far as I can tell it is all of the MD1 "enhancements" rolled into whatever they latest COM3 build was (probably 23017 or something).

OK, todays build is uploaded now ... the topbar corruption _was_ gone but then after 2 trips to the start menu it was back! gah! :mad: Will have to keep working on that ...

WWE_23022_P3600I_decoy-test2 (http://www.mediafire.com/?rtdjt2zyom2)

Anyway, the stupid Magnifier is turned off, and the Owner Info + Input + Buttons are back in Settings-> Personal

I have kept Chanvi's CHome app launchers (Settings & CLinks) and the Notifications panel ... but other than that I am trying out the standard WM6.5 look. Sorry about the start menu folder icons ... will get them sorted later (probably rearranging them anyway).

Have a good weekend everyone :)

tchoklat

8th August 2009, 02:20 AM

Is IE fixed in this build. I have uploaded WWE_21921_6IEMANTIT_P3600I_21928-hybrid and IE fails still and I cannot setup hotmail

tony

desolateone

8th August 2009, 03:14 AM

WWE_21921_6IETIT_P3600I_21928-hybrid (http://www.mediafire.com/?n23l2y3gz5h)

WWE_21921_6IEMANTIT_P3600I_21928-hybrid (http://www.mediafire.com/?mmkwjnmuzzz)

Cannot get either of these to sync with WMDC...

FIXED: corrupt driver - uninstall and re-install fixed the issue

the.decoy

8th August 2009, 01:35 PM

Is IE fixed in this build. I have uploaded WWE_21921_6IEMANTIT_P3600I_21928-hybrid and IE fails still and I cannot setup hotmail

tony

No sorry, IE is definitely not working in that hybrid (I mentioned that a few posts ago).

It looks like the IE is broken is all of those recent Chanvi kitchens I converted to p3600i.

Narshorn (in the Trinity kitchen thread) said it was due to the leftover RGU file in SYS\browsingie ... I haven't had a chance to test that yet myself, but here is a copy of 23016_6IEMANTIT that I have recooked with that RGU taken out:

WWE_23016_P3600I_6IEMANTIT_iefixed (http://www.mediafire.com/?qymdeomxk2k)

I hope it works for you (pls let me know). If it does I will re-upload the kitchen and other ie6 roms.

the.decoy

8th August 2009, 01:36 PM

desolateone

9th August 2009, 12:47 AM

Sorry ... what is WMDC?

Was driver problem on rom or your pc?

Windows Mobile Device Center which leads to Sync Center loading.

The driver on the PC was not loading correctly and therefore not displaying a connection to the PDA in the WMDC.

I went into device manager, uninstalled the PocketPC which had the ! in a yellow triangle and then reconnected the PDA, driver re-installed and now all is running as good as new!

Sorry for the confusion, there was nothing wrong with your ROMs! :D

tchoklat

9th August 2009, 04:32 PM

No sorry, IE is definitely not working in that hybrid (I mentioned that a few posts ago).

It looks like the IE is broken is all of those recent Chanvi kitchens I converted to p3600i.

Narshorn (in the Trinity kitchen thread) said it was due to the leftover RGU file in SYS\browsingie ... I haven't had a chance to test that yet myself, but here is a copy of 23016_6IEMANTIT that I have recooked with that RGU taken out:

WWE_23016_P3600I_6IEMANTIT_iefixed (http://www.mediafire.com/?qymdeomxk2k)

I hope it works for you (pls let me know). If it does I will re-upload the kitchen and other ie6 roms.

working great now! thanks.
I cannot setup my hotmail account though ...

tchoklat

ssamth2003

10th August 2009, 03:30 AM

could you check the kitchen of 23016, i can't download it, may the link problem. thks.

the.decoy

10th August 2009, 03:39 AM

could you check the kitchen of 23016, i can't download it, may the link problem. thks.

That's weird ... I just tested it then and it worked (went as far as choosing where to save the file but cancelled the actual download).

At what point does it fail? Does Mediafire give you an error?

PS: I have not yet fixed the IE fault in that kitchen, but all you have to do is delete the \SYS\23016\COMMON\SHARED\browsingie folder after you unzip it.

ssamth2003

10th August 2009, 04:21 AM

That's weird ... I just tested it then and it worked (went as far as choosing where to save the file but cancelled the actual download).

At what point does it fail? Does Mediafire give you an error?

PS: I have not yet fixed the IE fault in that kitchen, but all you have to do is delete the \SYS\23016\COMMON\SHARED\browsingie folder after you unzip it.

the media file keep ask me to "click here to start download" its repeat again and again and never real start download.

the.decoy

10th August 2009, 05:57 AM

the media file keep ask me to "click here to start download" its repeat again and again and never real start download.

Sounds like you have some kind of issue with Mediafire or the scripting on their pages.

Here you go, I have uploaded (the ie fixed kitchen) to 4Shared :)
http://www.4shared.com/file/124048587/15b6c452/Kitchen_WWE+FRA_23016_P3600I_iefixed.7z (http://www.4shared.com/file/124048587/15b6c452/Kitchen_WWEFRA_23016_P3600I_iefixed.html)

ssamth2003

10th August 2009, 09:07 AM

Sounds like you have some kind of issue with Mediafire or the scripting on their pages.

Here you go, I have uploaded (the ie fixed kitchen) to 4Shared :)
http://www.4shared.com/file/124048587/15b6c452/Kitchen_WWE+FRA_23016_P3600I_iefixed.7z (http://www.4shared.com/file/124048587/15b6c452/Kitchen_WWEFRA_23016_P3600I_iefixed.html)

thks very much. download it now.

the.decoy

10th August 2009, 09:19 AM

thks very much. download it now.

You're welcome.

I have also just done a test build of 23024 if you're interested:

WWE_23024_P3600I_decoy-test1 (http://www.mediafire.com/file/igqnyggtnnm/WWE_23024_P3600I_decoy-test1.7z) (mirror link http://www.4shared.com/file/124071020/4d5e4eca/WWE_23024_P3600I_decoy-test1.html )

In addition to whatever changes MS have made, I have done the StartMenu_Gridscene fix so that the top row of icons aren't obscured and as a memory-scavenging exercise I have been very brutal with recmod'ing almost any non-core modules back into files - so much so that I have managed to completely clear out "Slot 0" of the memory map. We will see if this helps keep more mem free or if it just means that the rom locks up whenever enough of it has been leaked by bad apps :rolleyes:

I noticed today that Mediafire now have a *required* popup on the download page so maybe you're browser was just blocking that ... but if you want I can upload the 23024 rom to 4shared too.

ssamth2003

10th August 2009, 10:01 AM

You're welcome.

I have also just done a test build of 23024 if you're interested:

WWE_23024_P3600I_decoy-test1 (http://www.mediafire.com/file/igqnyggtnnm/WWE_23024_P3600I_decoy-test1.7z)

In addition to whatever changes MS have made, I have done the StartMenu_Gridscene fix so that the top row of icons aren't obscured and as a memory-scavenging exercise I have been very brutal with recmod'ing almost any non-core modules back into files - so much so that I have managed to completely clear out "Slot 0" of the memory map. We will see if this helps keep more mem free or if it just means that the rom locks up whenever enough of it has been leaked by bad apps :rolleyes:

I noticed today that Mediafire now have a *required* popup on the download page so maybe you're browser was just blocking that ... but if you want I can upload the 23024 rom to 4shared too.

OHHHHHH man, you come up with the new version!!!! i just complete cooked 23016 (modify to my need) and under install of Neo Titanium theme http://forum.xda-developers.com/showthread.php?t=534553 its look good i think. should we incld in the Kitchen? also one buetifull today theme is http://forum.xda-developers.com/showthread.php?p=4300742#post4300742 good to try i'm sure you will like it.
anyway, will backup what i just did it and will try new version..:P
FYI, mediafire back to work now with this newversion download. :)

the.decoy

10th August 2009, 10:07 AM

OHHHHHH man, you come up with the new version!!!! i just complete cooked 23016 (modify to my need) and under install of Neo Titanium theme http://forum.xda-developers.com/showthread.php?t=534553 its look good i think. should we incld in the Kitchen? also one buetifull today theme is http://forum.xda-developers.com/showthread.php?p=4300742#post4300742 good to try i'm sure you will like it.
anyway, will backup what i just did it and will try new version..:P
FYI, mediafire back to work now with this newversion download. :)

Cool, I check those themes out real soon. No hurry to test 23024, it isn't really much different to 23022.

Actually good that you are working on 23016 as I suspect it will be the next candidate for "STABLE" status in this thread (since any new COM3 branch builds are going to be on the wacky new UI from MD1 branch). So by all means look at ways to pretty it up or make it more stable before we lock it off and make the full set of roms from it :)

Thanks ssamth

ssamth2003

10th August 2009, 10:59 AM

pls mirror to other site as Mediafire still cannot completed download. have try both on IE and my Safari.

the.decoy

10th August 2009, 11:06 AM

pls mirror to other site as Mediafire still cannot completed download. have try both on IE and my Safari.

no worries mate. here you go:
http://www.4shared.com/file/124071020/4d5e4eca/WWE_23024_P3600I_decoy-test1.html

I am heading offline for the night now. Cheers! :)

ssamth2003

10th August 2009, 12:38 PM

thks..flashed it and test for a few min still got top bar problem , magnifier and also memory less......
have to use my ppc to back to 23016 I will wait for you to put in the kitchen. thks the decoy.

the.decoy

11th August 2009, 11:52 AM

Another day ... another build :rolleyes:

Here is my test build of 23025:

WWE_23025_P3600I_decoy-test1 (http://www.4shared.com/file/124317111/3c099f7a/WWE_23025_P3600I_decoy-test1.html)

Topbar corruption in startmenu is finally fixed and I have also fixed the X/OK button from looking like it did. Apparently dialer is non-scrolling again too.

Oh yeah, should mention that "Fave People" (ATContacts) is still broken as of 23024 ... some kind of problem with it being compiled for a certain version of PocketOutlook, so not much I can do right now :( If you are still in a rom with it working I suggest dumping the regkeys for it and trying to import them back in after flashing (suspect it might just be the contacts selector that is borked).

And for ssamth, here is a beta copy of my new kitchen (with 23025) so you can play with altering these latest builds for yourself:

WM65-P3600I-DECOY-BETA-Kitchen-18_23025 (http://www.4shared.com/file/124319732/7364a7c3/WM65-P3600I-DECOY-BETA-Kitchen-18_23025.html)

It is far from being ready for general consumption ... but it is completely functional and uses the latest ervius 1.8.1 visual kitchen :D

Note that EXT layout is different to Chanvi (just 1 folder per build version, some pkgs in SHARED, some in COMMON) and I plan to use .erv files to set the package selections for ie6/ie8 & full/lite/etc.

Just open it, choose P3600i and then click on "Load ROM" (it should be pretty obvious from there).

ssamth2003

14th August 2009, 07:56 AM

Hi the decoy..
did you completed 23025 kitchen? awaiting to try. :P cheer!!

the.decoy

14th August 2009, 08:11 AM

Hi the decoy..
did you completed 23025 kitchen? awaiting to try. :P cheer!!

Ummm :confused: ... just the one I posted above ^^^

It isn't broken or anything ... I just haven't come up with a final EXT collection or start menu customisation of my own yet.

It could be quite a while before I get around to those things because I am currently obsessed with finding the right balance of files/modules to optimise our Virtual Memory usage (lol, along with everyone else in Da_G's porting thread :P ). On top of that there is a new build every few days lately (23028 just came out today).

You should at least give this one a try. I am happy to keep uploading it as I make changes to it but I want the "final" kitchen to be as good as I can make it so I am not rushing. :)

ssamth2003

17th August 2009, 06:53 AM

Hello, the decoy.
have been with 23025 (own cooked) from your kitchen for some time, its really good and fast accepted the titlebarlist is always annoy. and also i got automatic switch off phone after backlight activate several time ( I mean after the phone get black light off, the phone is completed turn OFF like we press power botton, have check all the setting but its all ok).
anyway, still waitting for your new rom version kitchecn and also hope it will include the new style today theme too. :) cheer!!!

the.decoy

17th August 2009, 07:06 AM

Hello, the decoy.
have been with 23025 (own cooked) from your kitchen for some time, its really good and fast accepted the titlebarlist is always annoy.

Yeah I know, I am really amazed at what a difference it made to get all those modules out of slot0 on the VM. Mine has been without a reboot for 3 days now and it just seems to stay solidly at about 80% ram used (goes up when apps are open but then back down again when they are closed) ... and super stable :)

The biggest hassle is that with the new OK/X buttons, nothing actually closes - it just minimises (which is really frustrating when you need to be pixel accurate when going to task manager because of the clock and new titlebar).

But overall I am liking the performance so much I am not even noticing the gigantic fonts/menus/etc as much :p

and also i got automatic switch off phone after backlight activate several time ( I mean after the phone get black light off, the phone is completed turn OFF like we press power botton, have check all the setting but its all ok).

Ahh, yeah I heard 1 or 2 people mention something about that ... hadn't seen it myself yet. Sounds like a build problem - much like the weird image skewing in AT Fave People or the strange font scaling in some CHome panels.

EDIT: Can't seem to replicate it on mine ... are you using backlight app on CHome app launcher or the control panel app under Settings-System ?

anyway, still waitting for your new rom version kitchecn and also hope it will include the new style today theme too. :) cheer!!!

Which new style today theme do you mean? I am actually quite keen to do something about the theme(s) in my release kitchen.

ssamth2003

17th August 2009, 08:09 AM

EDIT: Can't seem to replicate it on mine ... are you using backlight app on CHome app launcher or the control panel app under Settings-System ?

just under setting on the system.

Which new style today theme do you mean? I am actually quite keen to do something about the theme(s) in my release kitchen.[/QUOTE]

i like this very much and use it at this monent, http://forum.xda-developers.com/showthread.php?t=540116&page=13 clock help alot to catch my client aboard. but with new rom the alternative time had missed (Home & Visit)

Mind to share your lastest cooked one? thks in advance.

the.decoy

17th August 2009, 10:29 AM

i like this very much and use it at this monent, http://forum.xda-developers.com/showthread.php?t=540116&page=13 clock help alot to catch my client aboard. but with new rom the alternative time had missed (Home & Visit)

Mind to share your lastest cooked one? thks in advance.

OK, looking into that JML plugin now.

Haven't cooked any since the 23025_test1 that I posted on the 11th. That's the rom I have been running since then :D

I am finally doing the port of 23028 right now ... but based on what I am reading in the Da_G thread I am not expecting anything special from it. I think they add some color to the new titlebar thing but no bugs got fixed :rolleyes:

the.decoy

18th August 2009, 03:21 AM

i like this very much and use it at this monent, http://forum.xda-developers.com/showthread.php?t=540116&page=13 clock help alot to catch my client aboard. but with new rom the alternative time had missed (Home & Visit)

Hey which JML skin/theme are using?

Are you sure it isn't CMultiClock that provides you with the alt time?

ssamth2003

18th August 2009, 07:07 AM

Hey which JML skin/theme are using?

Are you sure it isn't CMultiClock that provides you with the alt time?

yes..its JML today 5.3, i'm using Analoq Duo skin from page#13 Post#127 as all instruction is there.very good skin but i still try to understand how to modify to match to my need. :(

the.decoy

18th August 2009, 07:23 AM

yes..its JML today 5.3, i'm using Analoq Duo skin from page#13 Post#127 as all instruction is there.very good skin but i still try to understand how to modify to match to my need. :(

OK, no worries. I installed the bare JML on my 23025 yesterday and I must say I find it to be a better platform for Today Screen than CAnalogClock was.

I cooked/flashed a 23028 last night so I will try putting that complete JML bundle (lib + skin + etc) onto it later today. Then I can look into how hard it would be to convert it to an EXT folder so we can cook it in (ready to go).

What exactly was you wish-list for JML? I might be able to help you there.

PS: Don't worry I will upload that 23028 later today too ;) I just need to recook it first to fix a few things.

ssamth2003

18th August 2009, 11:56 AM

thks the decoy, awaiting to try new rom.

the.decoy

19th August 2009, 07:21 AM

Sorry didn't get around to cooking that 23028 last night ... my kitchen is still in a mess from finally tackling the EXT structure (and a little bit of experimenting with JML Today).

yes..its JML today 5.3, i'm using Analoq Duo skin from page#13 Post#127 as all instruction is there.very good skin but i still try to understand how to modify to match to my need. :(

Well I am going to put together an EXT package for JMLToday so I can include it in the kitchen (and dump CAnalogCLock).

So if you have any requests, ask them now :D

What are the mods you wanted to do?

I already need to do something about the English-lang defaults being all US-centric only (imperial temp, backwards date, etc) and I also want to add a few more City codes to the built in list (including my own of course :o ) so that we don't have to go hunting down the Yahoo city code and enter it manually.

Anyone got some Cities they want added to the list?

.

ssamth2003

19th August 2009, 09:27 AM

Sorry didn't get around to cooking that 23028 last night ... my kitchen is still in a mess from finally tackling the EXT structure (and a little bit of experimenting with JML Today).

Well I am going to put together an EXT package for JMLToday so I can include it in the kitchen (and dump CAnalogCLock).

So if you have any requests, ask them now :D

What are the mods you wanted to do?

I already need to do something about the English-lang defaults being all US-centric only (imperial temp, backwards date, etc) and I also want to add a few more City codes to the built in list (including my own of course :o ) so that we don't have to go hunting down the Yahoo city code and enter it manually.

Anyone got some Cities they want added to the list?

.

thks the decoy, it seem what i try to mod was already ask by and Jumba already give the guide where to go :). http://forum.xda-developers.com/showthread.php?t=540116&page=19 on post#185. I really like the duo analog clock rather than the digital one.

if you can launch new kitchen with selectable clock (analog/digital) would be great.
also for my personal request if you can add Thai language and Thai PCM keyboard from the cab attached here in to the kitchen would be highly appreciate.

the.decoy

19th August 2009, 09:41 AM

thks the decoy, it seem what i try to mod was already ask by and Jumba already give the guide where to go :). http://forum.xda-developers.com/showthread.php?t=540116&page=19 on post#185. I really like the duo analog clock rather than the digital one.

if you can launch new kitchen with selectable clock (analog/digital) would be great.

Yes, I definitely plan to do that now. Probably have two different JMLToday EXT folders (each defaulted to Digital or Analog setup).

also for my personal request if you can add Thai language and Thai PCM keyboard from the cab attached here in to the kitchen would be highly appreciate.

:eek: ... I will see what I can do ... don't I need to add all the Thai lang MUIs to the whole kitchen though? :confused:

Nevermind, will look into your cabs and see what they do :)

Not gonna get much more done today I'm afraid ... I need to get out of here and go meet my wife for dinner (already late) :eek:

.

ssamth2003

19th August 2009, 10:01 AM

Thks very much for your kind, the decoy..
priority on your family its improtant, specially wife... :P. I have my sister study master degree in Brisbane too, may i have chance to travell there on December to join here success master degree....

ssamth2003

21st August 2009, 08:17 AM

the.decoy

21st August 2009, 08:59 AM

:)
Where's my master the decoy..
if you have completed the new kitchen, i'm really willing to try. as tomorrow is day off for me then i can play around for them.
sorry if its too much request from you. thks in advance.

lol, sorry man .. I am getting really close :o

I finished cleaning up most of the EXT-COMMON package folders last night, added some more performance tweaking to the OEM XIP and had a really cool idea for how I can automate all the PLG additions to the Titanium CPRs for our cooked-in plugins (as opposed to having to constantly hack the new build's CPRs and then overwrite them from an EXT folder).

I now simply have to make a handful of EXT folders that will set some icons for the start menu folders and create EXTs the JMLToday plugins.

I am sorry I didn't get more done today but I actually got sidetracked with writing a Mort app that will toggle the Vibrate option on/off for email/text/mms alerts (something I find annoyingly missing in the new chunky UI builds).

I just posted it to the Da_G builds thread a few min ago:
http://forum.xda-developers.com/showpost.php?p=4372788&postcount=1616

Oh ... I also started working on your Thai cabs :( ... man that thai-enabled cab is messed up! No wonder the kitchen converter could not handle it (the cab has some kind of embedded setup.exe instead of an xml). I have managed to decyper most of it in a hex editor and know what the files are and where they go ... but trying to work out what registry changes it makes it tricky.

When you run it ... does it stop windows from running in English or does it just enable the use of thai text when you receive it in msgs?

From what I can tell it basically seems to do some kind of trick with a pair of Tahoma font files, some codepage hacks and a replacement wince.nls (thats the scary part - would make non-booting rom if I let the EXT just dump that in the windows dir :eek:)

ssamth2003

21st August 2009, 09:36 AM

lol, sorry man .. I am getting really close :o

I finished cleaning up most of the EXT-COMMON package folders last night, added some more performance tweaking to the OEM XIP and had a really cool idea for how I can automate all the PLG additions to the Titanium CPRs for our cooked-in plugins (as opposed to having to constantly hack the new build's CPRs and then overwrite them from an EXT folder).

I now simply have to make a handful of EXT folders that will set some icons for the start menu folders and create EXTs the JMLToday plugins.

I am sorry I didn't get more done today but I actually got sidetracked with writing a Mort app that will toggle the Vibrate option on/off for email/text/mms alerts (something I find annoyingly missing in the new chunky UI builds).

I just posted it to the Da_G builds thread a few min ago:
http://forum.xda-developers.com/showpost.php?p=4372788&postcount=1616

Oh ... I also started working on your Thai cabs :( ... man that thai-enabled cab is messed up! No wonder the kitchen converter could not handle it (the cab has some kind of embedded setup.exe instead of an xml). I have managed to decyper most of it in a hex editor and know what the files are and where they go ... but trying to work out what registry changes it makes it tricky.

When you run it ... does it stop windows from running in English or does it just enable the use of thai text when you receive it in msgs?

From what I can tell it basically seems to do some kind of trick with a pair of Tahoma font files, some codepage hacks and a replacement wince.nls (thats the scary part - would make non-booting rom if I let the EXT just dump that in the windows dir :eek:)

Ohhhh, i'm sorry if i have disturbed you..:(
yes the thai enable cab is just lets me enable to use Thai text (read and write) only..it dont do anythings to the windows (as i know).

the.decoy

21st August 2009, 10:47 AM

Ohhhh, i'm sorry if i have disturbed you..:(
yes the thai enable cab is just lets me enable to use Thai text (read and write) only..it dont do anythings to the windows (as i know).

no, no. Is ok :)
I like a challenge :D

The PCM Keyboard was simple and I have already added it to EXT-COMMON.

For the Thai-enable I will just have to install it myself from cab and try and reverse engineer whatever it changes in the registry ... if that doesn't work you will just have to continue installing it from cab on first boot after flash ...

However I might be able to make that easier anyway since my idea about the PLG/CPR setup involves putting XDA_UC into the ROM (instead of the regular autorun / UC we current use) so I can have cabs & scripts in the ROM image that are set to run on first boot (without need of anything on your SD card).

Anyway, it is Friday night now so I am off for a beer with some mates ;)
Have a good weekend!

.

ssamth2003

21st August 2009, 11:16 AM

thks my master..have a full fun weekend.

ssamth2003

26th August 2009, 10:11 AM

Still waiting for my master to have time to completed his new rom kitchen, even i have use 23025.5.3 with no problem (just sometime its switch off the ppc automatic only..)

Cheer my master The Decoy !!!

ssamth2003

31st August 2009, 04:57 AM

new day new rom version as you say... still waiting some thing news and challenge.
new rom version 23403 have been posted on Da_g !!!!!

the.decoy

1st September 2009, 09:41 AM

Sorry man ... been swamped with work ... haven't ported any new builds since 23028 (and even that build is just test mule for the kitchen).

The kitchen is very close but I am still debugging the automatic PLG installer script I wrote for adding the Titanium plugins into the CPR files. I am still a bit noob with mortscript so it is hard to follow what happened when it doesn't work :(

I would offer up the NBH of that test build I am running but you would only find it to be less than the last one I gave you (because none of the plugins are in the CPRs - its basically lame) ... plus it actually corrupted on me yesterday (first time in several builds).

So, unfortunately you will just need a little patience for now. Believe me I will be uploading it the moment I get it working right ... then I can get back to doing build ports in a timely manner too :D

ssamth2003

1st September 2009, 11:56 AM

thks the decoy...
waiting to try your new cooked rom always. cheer!!!

the.decoy

11th September 2009, 02:57 AM

Still haven't had enough free time to finish my own kitchen ...

But I have done a quick conversion of Chanvi's new 23041 Kitchen :D

See first post for details.

RedBux

11th September 2009, 06:28 AM

You had done a great great great job to trinitys' community ......god bless you
Regards

the.decoy

11th September 2009, 07:22 AM

You had done a great great great job to trinitys' community ......god bless you
Regards

Thanks man :o

Kinda frustrated that I am stuck at like 95% ready with my own kitchen but my work has been crazy busy lately and when I do find some time I am getting a bit bogged down with obsessing over the messy nature of EXT packages (leaving all their files in the Windows dir during the cooking)

... especially all these Titanium plugins I want to include, which all share common file-naming and therefore overwrite it each other in the process :(

eg: all of them use CHomeRefresh.exe and ATPluginInstaller.exe and thats cool as I only need 1 copy of those but they also each have a "Default.plg" which is completely different for each plugin (so then I have to do lots of tedious file renaming and edit the app.dat to name them back post-cook.

Then on top of that, if any of the plugins have a weather component that means another 40-50 image files that end up cluttering up the Windows dir :rolleyes:

I wrote a pretty nifty little mortscript for auto-installing the PLGs into Titanium's CPR files (run on first boot via Autorun) but now I am starting to think that maybe I should just roll all the plugins back into CABs which get installed on first boot instead :)

LOL, anyway, in the meantime it is a lot easier for me to convert a new Chanvi kitchen (adding a few of my own tweaks) and pass that on :D

I still haven't heard back from Chanvi about whether there were any OEM folder changes required for this build (might need to re-release it if there are) but I have been running the 8IEMANTIT rom on my own phone for 24hrs now and it seems ok to me (quite smooth and responsive in fact). Not using the M2D side of it though, just wanted to make sure I tested the "Full" rom for you guys.

ssamth2003

11th September 2009, 08:31 AM

the.decoy

11th September 2009, 08:37 AM

thks my master the decoy for your new kitchen. I just completed D/L and flash to my CHT9110, its very fast and look good.
Just only one thing that i need is: how i can relocate the icon on program page? (previous version was able to do by press&Hold on the icon and then popup say move to top...) this will help to easy direct access to the program.

Actually this has the newer (COM3) functionality for Start Menu ranking:

Press+Hold on Icon
Drag icon to preferred location (on top of another icon that is in that location)
Drop :D (it will bump the previous icon down to make room)

The way it re-arranges the icon you are displacing takes a bit of getting used to but in general it is much quicker for getting that top page of Start Menu setup with all your most favourite icons.

EDIT:
Oh yeah, I also forgot to mention that the wallpaper you can see in the screen shots is included in the rom (the files are classicblue_stwater_240_320.jpg and classicblue_stwater_320_240.jpg and you can find them in the Windows dir).

Chanvi put them into the SYS so that they would replace the standard Classic Blue theme wallpapers but no matter what I do they seem to get overridden by that light blue background that gets set during first boot :confused:

So as of right now, the easiest way to use them is to go to Themes, choose "Classic Blue" (DO NOT CHOOSE ANY OF THE OTHER THEMES AS THAT WILL BREAK THE NEW 6.5.x UI) and that will get rid of the light blue, then dump these two files back into the Windows folder as stwater_240_320.jpg and stwater_320_240.jpg . I will attach them here to make it nice and easy.

ssamth2003

11th September 2009, 01:11 PM

Actually this has the newer (COM3) functionality for Start Menu ranking:

Press+Hold on Icon
Drag icon to preferred location (on top of another icon that is in that location)
Drop :D (it will bump the previous icon down to make room)

The way it re-arranges the icon you are displacing takes a bit of getting used to but in general it is much quicker for getting that top page of Start Menu setup with all your most favourite icons.

EDIT:
Oh yeah, I also forgot to mention that the wallpaper you can see in the screen shots is included in the rom (the files are classicblue_stwater_240_320.jpg and classicblue_stwater_320_240.jpg and you can find them in the Windows dir).

Chanvi put them into the SYS so that they would replace the standard Classic Blue theme wallpapers but no matter what I do they seem to get overridden by that light blue background that gets set during first boot :confused:

So as of right now, the easiest way to use them is to go to Themes, choose "Classic Blue" (DO NOT CHOOSE ANY OF THE OTHER THEMES AS THAT WILL BREAK THE NEW 6.5.x UI) and that will get rid of the light blue, then dump these two files back into the Windows folder as stwater_240_320.jpg and stwater_320_240.jpg . I will attach them here to make it nice and easy.

OHHHHHHH!!! thats much easy, thks

the.decoy

11th September 2009, 02:19 PM

FIX (for pixel glitches at bottom of lockscreen):

Copy these CPR files (http://forum.xda-developers.com/attachment.php?attachmentid=226520&stc=1&d=1252670681) into \Windows\

Aye75

12th September 2009, 10:23 AM

for me scrolling contacts and everything else seems slow. anyway to speed this up ?

bcman

12th September 2009, 04:15 PM

for me I could not see the entered number on dial pad. Anyone same with me ? I have try two different version got same result.

the.decoy

14th September 2009, 01:42 AM

for me scrolling contacts and everything else seems slow. anyway to speed this up ?

Sorry, not that I am aware of anyway.

for me I could not see the entered number on dial pad. Anyone same with me ? I have try two different version got same result.

:( No you're right, it is the phone canvas settings in phcanrc.dll
It seems that the dialed number (and the top half of the auto-complete numbers list box) are being displayed too high on screen in the new UI.

Damn, they have finally got rid of the scrollbar on phone canvas that all the previous COM3 builds had ... and now this :rolleyes:

I had a quick look into phcanrc.dll to see if I can find the settings that need tweaking ... but I can't quite make sense of which DIALOGs refer to "number being dialed" panel.

As soon as I come up with a fixed phcanrc.dll I will post it here.

minigirl

16th September 2009, 03:24 PM

can anybody tell me wat the mean of [KITCHEN]? WWE? FRA? is wat means?:confused:

oggi1969

16th September 2009, 04:34 PM

Hi every body

Hi the decoy

can anybody tell me wat the mean of [KITCHEN]? WWE? FRA? is wat means?:confused:

Hi minigirl

Soory for my bad english

if you cook your rom for p3600i

The best is kitchen the decoy ... ,-)

Base kitchen Chanvi and me ... ,-)

For 6.5 kitchen the decoy is ok
for 6.1 change sys , oem , rom =>> look post joncle for flash and boot .

look for your language 409 is english ... 40C is french

For cook rom wwe or fra look post chanvi=oggi p3600 uniquely .
..

Best regard Oggi

minigirl

16th September 2009, 06:23 PM

any recomended rom for my HTC P3600i WM 6.1.....& who can help /guide me to flash my P3600i,me prefer English rom...From Malaysia...:)

RedBux

17th September 2009, 02:45 AM

Hi minigirl
You can find a great amount of stuffs and articles in here ...just do your search, reading, and read a lot.........for sure U could get all the answers to ur question.

oggi1969

17th September 2009, 09:41 AM

hi

@minigirl

Test this rom

http://www.mediafire.com/?knyhlo11zmh

minigirl

17th September 2009, 02:22 PM

hi

@minigirl

Test this rom

http://www.mediafire.com/?knyhlo11zmh

wow,thx friend........work great....but got any chinse software?can it be use ce-star....

minigirl

17th September 2009, 02:27 PM

hi

@minigirl

Test this rom

http://www.mediafire.com/?knyhlo11zmh

wow,thx friend........work great....but got any chinse software?can it be use ce-star....

minigirl

17th September 2009, 02:29 PM

i was select today Items as touch flo.....but when i soft reset it become no touch flo screen is it cannot be safe?..:(

oggi1969

18th September 2009, 08:49 AM

i was select today Items as touch flo.....but when i soft reset it become no touch flo screen is it cannot be safe?..:(

Hi
Sorry for my bad english

edit htchome.xml =>> replace 0 to 1 =>> for option touchflo.
Or eventually create shortcut with resco or total commander
Copy shotcut into startups " windows\startup " ...
not me cook this rom .... chanvi cook this rom
me cook rom 6.1 p3600 uniquely....

Regard Oggi

the.decoy

18th September 2009, 09:08 AM

First of all, THANKS OGGI :D
Really appreciate you stepping in to help on this (I am extremely busy at work these last few weeks so I am finding it hard to respond on XDA quickly).

can anybody tell me wat the mean of [KITCHEN]? WWE? FRA? is wat means?:confused:

KITCHEN = Application and files required to build your own ROM

WWE = English (code 0409)
FRA = French (code 040C)

In this thread I provide Kitchen bundles so that people can build a ROM that is custom suited to their needs. However I do always include several pre-built ROMs that I have compiled using that Kitchen (see first page).

As Oggi mentioned, this Kitchen is actually evolved from the one built by Oggi & Chanvi (for the P3600i's older brother, the Trinity).

Hi minigirl
You can find a great amount of stuffs and articles in here ...just do your search, reading, and read a lot.........for sure U could get all the answers to ur question.

Actually it was yesterday when I was in the process of writing a reply to minigirl - with links to the various guides she would need - when I discovered that (much to my horror) the TrinityGuides.info website has been retired :eek: and the domain now has damn page-squatters on it :mad:

So, since then I have been attempting to rebuild the Trinity Flashing Guide myself (using text recovered via the cache copy at Internet Archive).

I now have a working replica posted into the P3600i Flashing Tutorial (http://forum.xda-developers.com/showthread.php?p=4550781#post4550781) thread.

I am going to have to re-capture all of the images (I have only had time to do the Hard-SPL one so far). If anyone happens to have a copy (or PDF) of the original I would very much like to get a copy.

I realise that at this stage in the Trinity/P3600i lifecycle we are not going to see too many new TRIN* users on the XDA scene but minigirl proves that these phones are still going to get sold a few more times (2nd-hand) before they die and we don't want the new owners bricking them because there was no tutorial for how to get Hard-SPL on there before they start flashing :eek:

Thanks everybody! :)

oggi1969

18th September 2009, 09:40 AM

Hi every body

Hi the decoy

Thank's for your work for p3600i

Soory for my reponse my english is very very bad.

Chanvi new htc...

My cook other kitchen .... Not finish ....
Share for you ... i dont no ... no ,finish .... certinly ... october ???

For me trinity good phone =>>p3600I the best impossible buy p3600I for french ...

Regard Oggi

minigirl

18th September 2009, 02:04 PM

Hi
Sorry for my bad english

edit htchome.xml =>> replace 0 to 1 =>> for option touchflo.
Or eventually create shortcut with resco or total commander
Copy shotcut into startups " windows\startup " ...
not me cook this rom .... chanvi cook this rom
me cook rom 6.1 p3600 uniquely....

Regard Oggi

how to edit htchome.xml ,need use any software?

oggi1969

21st September 2009, 09:13 AM

how to edit htchome.xml ,need use any software?

hi

Copy your file on your pc (example desktop) open it with an XML editor or notepad or write , then amends replaces the old on your phone with the new edit (example actyvSynch).

Regard oggi

minigirl

22nd September 2009, 05:51 AM

:confused:oggi,can i know where to get that htchome.xml file?inside HTC P3600i?

the.decoy

22nd September 2009, 06:36 AM

:confused:oggi,can i know where to get that htchome.xml file?inside HTC P3600i?

It will be in the \Windows\ folder on your phone

Connect via ActiveSync

Go to Explore

Browse to "My Windows Mobile-Based Device" and then into the Windows folder (be patient, it will take almost a minute to read that folder)

Copy htchome.xml to your PC (leave the ActiveSync Explorer window open)

Edit with Notepad and save

Drag+drop xml file back into the \Windows\ folder in the ActiveSync Explorer window (confirm overwrite of existing file).

DEUTSCHSWEI

23rd September 2009, 10:09 PM

the.decoy

24th September 2009, 02:33 AM

Hi, this rom is really great but I face a strange issue with signing in MSN, i'm not able to access to it and i'm not able to understand the reason,someone has an idea. I have the problem with version 21900 as well with 23041.

Thanks to anyone can give me a suggestion.

This is using the wm6.5 Windows Live "Messenger" app?

Yeah, I unfortunately none of the Windows Live apps have been able to login for me either. Sorry ... not sure what build version this problem started at :(

If anyone knows what version of Chanvi's ROMs it last worked for, I would be keen to investigate what changed since then.

I have been meaning to look into this for a awhile but I wasn't sure if it was just me (no one else had mentioned it so far).

I am currently in the middle of porting 23052 so if anyone has suggestions for this bug I am keen to hear them :D

chanvi93

24th September 2009, 04:44 AM

Hello
I have not any time to read and reply you , i have not trinity now .
But it seems this pb is caused by "compime.dll" , it's in my EXT folder .
Regard

the.decoy

24th September 2009, 05:14 AM

Hi Chanvi, thanks for helping :)

Hello
I have not any time to read and reply you , i have not trinity now .
But it seems this pb is caused by "compime.dll" , it's in my EXT folder .
Regard

Yep, you had it flagged as "for FingerKeyb" ... I will start experimenting with replacing that.

First I will have to work our WTF is going on with 23052 ... it seems the entire Autorun system is borked :confused: none of the provxml files are being imported on first boot and the config.txt isn't being run either???

I am a few days behind on following Da_G's thread right now so I am reading my way through trying to see when this started. I know a few people had this happen when they replaced their OEM initflashfiles.dat (using the newer dats Da_G posted) but I haven't done that yet.

Have you been porting anything newer than 23041 (on any device) and seen this happen?

EDIT: Oh I almost forgot ... with your 23041 kitchen, did you made some changes to the OEM? Should I be make same changes to the P3600i OEM files?

EDIT2: No joy with that compime.dll from 21731. Still get error saying cannot login, "might be your connection" etc etc

... worse still I am hitting a brick wall with this autorun issue in 23052 :mad:
it has to be something in the SYS but narrowing it down is sooooo time consuming because need to build rom and flash device every time to test.

mac_es

24th September 2009, 09:36 AM

I have autorun running in 23052. It starts but it doesn't reboot when it finish (sdautorun)

The oemfiles changes are to put a link to checkautorun in the startup folder. you can do it whith app.dat or in a provxml...

For the keyboard, ezinput 1.5 works fine

the.decoy

24th September 2009, 09:43 AM

Hi Mac :)

I have autorun running in 23052. It starts but it doesn't reboot when it finish (sdautorun)

The oemfiles changes are to put a link to checkautorun in the startup folder. you can do it whith app.dat or in a provxml...

Yes but wasn't this fix required way back around build 2302x or something? because of the new initflash.dat's ?

Because I never used the updated initflash.dat file :confused:

I have a kitchen where (OEM completely untouched) I can build a fully autorun-capable ROM using the 23041 SYS/XIP but autorun is dead if I use 23052 SYS/XIP :confused:

Is it even autorun that imports all the mxipupdate_***.provxml files anyway?? Because none of them are getting done either?? And they are integral to the SYS being setup properly??? wtf :(

For the keyboard, ezinput 1.5 works fine

lol, actually keyboard is fine ... chanvi was suggesting compime for a MSN issue, I was saying that I thought compime was used to fix fingerkeyb.

the.decoy

24th September 2009, 10:04 AM

Aha! :D
Found (in fact remembered) something in my OEM setup ...

The oemfiles changes are to put a link to checkautorun in the startup folder. you can do it whith app.dat or in a provxml...

OK, just realised ... this has nothing to do with AutoRun ... it is my .provxml files not being imported that is causing the problem! :eek:

You see, my Kitchen's OEM (built by Chanvi/Oggi) uses mxipupdate_zzPIED_101.provxml to create that shortcut to checkautorun, and because none of the provxml files are being run, the shortcut isn't getting created.

So ... the real question is: why on earth is 23052 not importing/running the mxipupdate_XXX.provxml files??? :confused:

Any ideas?
Any chance I have recmodded something I shouldn't have (lol, not like I have a choice with this 6.1 NK :p )

Thanks! :D

chanvi93

24th September 2009, 10:36 AM

Hello
As i said , i haven't not my tribity now , i'm busy with Manila 2.5 Footprints ( i need it) so i haven't prot yet the latest build, but it seems 23052 has a pb with some mxip ....proxml file , try an other newer like 23053 .

EDIT : Have you pory the totality SYS from build? Because SQM is very important , if only use "custat.exe" some time the first boot isn't fine.

mac_es

24th September 2009, 11:29 AM

@the.decoy

why on earth is 23052 not importing/running the mxipupdate_XXX.provxml files???

Check the file attributes of the *.vol files
I'm putting the checkautorun link whith a provxml whithout problems

lol, actually keyboard is fine ... chanvi was suggesting compime for a MSN issue, I was saying that I thought compime was used to fix fingerkeyb.

compime.dll is the file which shows the suggested words, ezinput comes whith another one, FingerKeyb uses the standard one. So using ezinput use other dll.

@chanvi93

As i said , i haven't not my tribity now , i'm busy with Manila 2.5 Footprints ( i need it) so i haven't prot yet the latest build, but it seems 23052 has a pb with some mxip ....proxml file , try an other newer like 23053 .

I'm in 23052 whith no problems whith my provxml files. In 23053 I have 2 issues: speeddial not working, when connecting to USB I can't browse files (I can sync but no browse)

EDIT : Have you pory the totality SYS from build? Because SQM is very important , if only use "custat.exe" some time the first boot isn't fine.

I'm using the dummy custat.exe, should I use a full SQM package?

mac_es

24th September 2009, 11:32 AM

Ah!

In 23052 have you smartdialing working properly?

the.decoy

25th September 2009, 01:59 AM

@mac_es

Ah, yes I suspect it might be a file attributes issue. I had to strip the SHR flags off a few things to be able to edit an RGU ... was a bit distracted at the time and might have done it globally to the whole SYS (my bad :o )

Think it will be faster if I just extract SYS again from scratch (yay, more recmodding :rolleyes: ) ... frankly I should have done that sooner because surely there would have been more noise in the Da_G thread if anyone else had this problem. Oh well, breaking things is always the quickest way to learn their inner workings :p

Later today (when I build another 23052) I will check out smartdialing for you (what exactly am I testing for?).

Thanks!

@chanvi93

Yeah I always leave SQM alone (I don't even bother with the dummy version because really that feedback pop-up isn't so bad, you just close it anyway).

In fact given the extra Storage Memory we have on the P3600i (vs the Trinity), I tend to strip very few packages from SYS (if any) ... I just brutally recmod the stuff that is "useless" so that it isn't costing me any Slot 0 VM.

Thanks again, sorry to bother you about this stuff now that you aren't officially doing Trinity anymore.

tchoklat

25th September 2009, 04:12 AM

the.decoy

25th September 2009, 04:24 AM

I have WWE_23041_P3600I_6IETIT running and it is gr8 though the dialler has an issue. When dialling a number not in contacts the numbers dialled DO NOT appear on the screen until after you press TALK ..

tchoklat

Yes, I am aware of this bug ... it was introduced somewhere in the new new 6.5.x UI layout :(

Many people reported similar "dialer layout" issues with the Tachi dialer and referred to a fix that can be done by hacking the phcanrc.dll

Unfortunately I have not yet managed to do this myself (sorry, I have never successfully edited a DLL and then signing it properly it to go back into the kitchen) :(

If someone else wants to donate some dll-hacking skills I would be very thankful. :D

Eventually I will have the spare time to try to master it myself (or find a new phone canvas) ... in the meantime I do all my calls from contacts anyway.

EDIT: I should point out that I have actually had this DLL open and looked into it ... the biggest problem is that I cannot work out which DIALOG object is actually the "Current entering number" field we are looking for :confused: ... the fix for the Tachi dialer people was apparently something to do with adding an EXSTYLE (or something like that) to the top of the appropriate DIALOG section, although the ID numbers they refer to are not even in our DLL :confused:

the.decoy

25th September 2009, 07:11 AM

Hey mac :)

@mac_es
Ah, yes I suspect it might be a file attributes issue. I had to strip the SHR flags off a few things to be able to edit an RGU ... was a bit distracted at the time and might have done it globally to the whole SYS (my bad :o )

Later today (when I build another 23052) I will check out smartdialing for you (what exactly am I testing for?).

Yeah, it was those file permissions. Extracted a fresh SYS and made sure not to change any attribs and the build works now. Thanks buddy!

Unfortunately I can also confirm that SmartDialing is indeed dead (it was already too far up the screen layout in 23041 anyway).

Along with SmartDialing not working, the "current dialling number" field is now totally off screen (before you could at least see the bottom few pixel rows of that field).

Whole damn (OEM 1.50.27317.0) Phone Canvas is going fubar :rolleyes:

One solution I have just tested is to use the newer OEM Canvas/SmartDial package from the latest MEGA (QVGA) packages.

You can install the Canvas onto existing rom using this cab:
HTC Phone Canvas 2G.3.0.1917.1620.cab (http://www.mediafire.com/download.php?lngyytmmzgj)

It has a fully working SmartDial and you can see what number you are dialing ...

However, this newer canvas does have the cursed "Unnecessary ScrollBar" issue :(

Depends on which issue irks you more I guess :rolleyes:

EDIT: Oh yeah forgot, no Video Calls on this Canvas as it is only 2G

EDIT2: And annoyingly it seems to keep opening the dialer whenever you "wake" the phone up with the power button :confused:
(that happens wiith cab install and also with it cooked into the ROM in place of old canvas/smartdial)

mac_es

25th September 2009, 08:57 AM

Hey mac :)

Yeah, it was those file permissions. Extracted a fresh SYS and made sure not to change any attribs and the build works now. Thanks buddy!

Great!

Unfortunately I can also confirm that SmartDialing is indeed dead (it was already too far up the screen layout in 23041 anyway).

Along with SmartDialing not working, the "current dialling number" field is now totally off screen (before you could at least see the bottom few pixel rows of that field).

Whole damn (OEM 1.50.27317.0) Phone Canvas is going fubar :rolleyes:

One solution I have just tested is to use the newer OEM Canvas/SmartDial package from the latest MEGA (QVGA) packages.

You can install the Canvas onto existing rom using this cab:
HTC Phone Canvas 2G.3.0.1917.1620.cab (http://www.mediafire.com/download.php?lngyytmmzgj)

It has a fully working SmartDial and you can see what number you are dialing ...

However, this newer canvas does have the cursed "Unnecessary ScrollBar" issue :(

Depends on which issue irks you more I guess :rolleyes:

EDIT: Oh yeah forgot, no Video Calls on this Canvas as it is only 2G

EDIT2: And annoyingly it seems to keep opening the dialer whenever you "wake" the phone up with the power button :confused:
(that happens wiith cab install and also with it cooked into the ROM in place of old canvas/smartdial)

Ok, So it is not me.

What I have done is disable the smartdialing so I have 3G dialer whith no wakeup problems.

The wake up problem is happening in any phonecanvas newer than 1.5 so I suspect that we are forced to drop smartdial support or to use the native dialer (2G).

cu

l2dante

27th September 2009, 08:14 PM

there is no way to get those roms for p3600?

the.decoy

28th September 2009, 04:44 AM

What I have done is disable the smartdialing so I have 3G dialer whith no wakeup problems.

The wake up problem is happening in any phonecanvas newer than 1.5 so I suspect that we are forced to drop smartdial support or to use the native dialer (2G).

Don't you still have the problem with "current dialing number" field being off the top of screen in the 3G dialer (when dialing numer directly from keypad)?

I am currently trying out Trinity_Pandora dialpad cabs that Chanvi used to include in his suggested bundle of UC ("Postinstall") cabs. Blue is pretty much just like the native dialer but works well enough. The Diamond dialer is working well and it has its own smartdial ... which works the very first time you use it (albeit with the listbox halve visible issue) but then is not working the next time you use the dialer :confused:

However what I find more troubling so far with 23053 is the memory usage :eek:

It starts out ok, but after a few hours the free memory gets quite low (compared to how 23041 would be) :(

Have you seen this or do I need to go examine my SYS to see if I have borked something else in the porting (or the dialer experimenting)?

there is no way to get those roms for p3600?

Yes, very simply. They are derived from the Trinity kitchen (http://forum.xda-developers.com/showthread.php?t=513421) to begin with ... just download the 23009 Kitchen, update it with the 23041 download and then cook whichever ROM you wanted.

Or are you referring getting them pre-cooked into ROMs so you can just install?

Which ROM in particular were you after? I guess I could cook a few of them for Trinity if people want them.

mac_es

28th September 2009, 09:00 AM

Don't you still have the problem with "current dialing number" field being off the top of screen in the 3G dialer (when dialing numer directly from keypad)?

Whithout smartdial it is working flawlessly

I am currently trying out Trinity_Pandora dialpad cabs that Chanvi used to include in his suggested bundle of UC ("Postinstall") cabs. Blue is pretty much just like the native dialer but works well enough. The Diamond dialer is working well and it has its own smartdial ... which works the very first time you use it (albeit with the listbox halve visible issue) but then is not working the next time you use the dialer :confused:

This dialer has the issue of dialing automatically when resuming the device? If no, there is a link available?

However what I find more troubling so far with 23053 is the memory usage :eek:

It starts out ok, but after a few hours the free memory gets quite low (compared to how 23041 would be) :(

Have you seen this or do I need to go examine my SYS to see if I have borked something else in the porting (or the dialer experimenting)?

Are you closing the apps? The X button now it is not catched by the HTC task manager, you have to wait for a newer version or use e-natives showcase.

Whith 23052 (23053 was giving some problems to me) I got an stable memory whith common use. Is allways 20MB RAM free around (it dependes in AS, calls...)

the.decoy

28th September 2009, 09:36 AM

Whithout smartdial it is working flawlessly

OK, will have to check that out ... you just ditched the SmartDialing folder from OEM in the Kitchen?

This dialer has the issue of dialing automatically when resuming the device? If no, there is a link available?

Yeah, no "wake up" bug with this "Diamond" style dialer ... I have been editing the phcanrc.dll for it today but I cannot seem to get the smartdial dialog control to move down far enough. My first change of coords moved it down ~10px but non of my subsequent edits, with ever higher "Top" values, have moved it down far enough to be 100% visible

But so far it is still my best option because:
YES = 3G (Video) Capable
YES = Visible Number Dialed
NO = Unnecessary Scrollbar Bug
MAYBE = Working Smartdial

The only link I ever had was the WWE_PostInstall.rar (http://www.mediafire.com/?f3zda24nltz) that Chanvi has from older kitchen ... they are in the dialpad folder of that rar file.

Are you closing the apps? The X button now it is not catched by the HTC task manager, you have to wait for a newer version or use e-natives showcase.

Whith 23052 (23053 was giving some problems to me) I got an stable memory whith common use. Is allways 20MB RAM free around (it dependes in AS, calls...)

Yeah I am fully aware of the whole X-not-closing situation. I use the HTC Taskmanager (with transparent corner reghack) instead of showcase but I do close things down properly. I am talking about a more systemic memory leak :(

Hmmm ... looks like I'd better look into it a bit further then. Mine is fine for a while (~15M free) but eventually it has got to point where it simply has TMail in the background and it is at 90% used (~5M free) :confused:

mac_es

28th September 2009, 10:48 AM

OK, will have to check that out ... you just ditched the SmartDialing folder from OEM in the Kitchen?

No, I disable it. I cook in because I wanted to try some registry tweaks

Yeah, no "wake up" bug with this "Diamond" style dialer ... I have been editing the phcanrc.dll for it today but I cannot seem to get the smartdial dialog control to move down far enough. My first change of coords moved it down ~10px but non of my subsequent edits, with ever higher "Top" values, have moved it down far enough to be 100% visible

Take care that you jave to edit the registry too, there are 4 coordinates in it for smartdialing

But so far it is still my best option because:
YES = 3G (Video) Capable
YES = Visible Number Dialed
NO = Unnecessary Scrollbar Bug
MAYBE = Working Smartdial

The only link I ever had was the WWE_PostInstall.rar (http://www.mediafire.com/?f3zda24nltz) that Chanvi has from older kitchen ... they are in the dialpad folder of that rar file.

I haven't tried it, but it seems that is a 1.5 dialer, whith graphics similar to Diamond look. As you are editing phcanrc have you get rid off the bar that appears above the calls when you mimize the dialpad? It is the dialing number whith MS dialer.

Yeah I am fully aware of the whole X-not-closing situation. I use the HTC Taskmanager (with transparent corner reghack) instead of showcase but I do close things down properly. I am talking about a more systemic memory leak :(

Hmmm ... looks like I'd better look into it a bit further then. Mine is fine for a while (~15M free) but eventually it has got to point where it simply has TMail in the background and it is at 90% used (~5M free) :confused:

Which version of arcsoft are you using? Me 5_2_3_22R1 and I get tmail stable, though I don't see many mails in the phone.

natan15

1st October 2009, 07:05 AM

hi i am looking for wm6.5 stable rom for my p3600i
can anyone halp instracsion, and how to start .
my device is cid unlock and have mary 3.7 rom

thank
nat

the.decoy

1st October 2009, 07:10 AM

hi i am looking for wm6.5 stable rom for my p3600i
can anyone halp instracsion, and how to start .
my device is cid unlock and have mary 3.7 rom

thank
nat

You have HardSPL bootloader on there too? Make sure you do otherwise it only takes 1 bad flash to be bricked.

You don't need to build your own with the kitchen(s) in this thread, there are pre-cooked ROMs on the first page and you can just download, unzip and run the ROMUpdateUtility.exe (with the phone on the Tri-color HardSPL bootloader and plugged in via USB).

See P3600i Flashing Tutorial (http://forum.xda-developers.com/showthread.php?p=4550781#post4550781) for details steps :)

PS: I am going to have a new version up in a few hours so maybe hold off until that gets posted. ;)

the.decoy

2nd October 2009, 02:49 PM

Took a more than a few hours :o but the latest 23060 build is ready on first page :D

ROMS are up but Kitchen is still uploading.

EDIT: Kitchen is ready now.

natan15

2nd October 2009, 10:00 PM

Took a more than a few hours :o but the latest 23060 build is ready on first page :D

ROMS are up but Kitchen is still uploading.

thanks for your help .

nat

robinbb

3rd October 2009, 12:48 AM

Took a more than a few hours :o but the latest 23060 build is ready on first page :D

ROMS are up but Kitchen is still uploading.

Brilliant - congratulations!

chanvi93

3rd October 2009, 03:03 PM

Took a more than a few hours :o but the latest 23060 build is ready on first page :D

ROMS are up but Kitchen is still uploading.

EDIT: Kitchen is ready now.

CONGRATULATIONS
Dammage i haven't Trinity now to test it , can you tell me what are you did for Slot0 ?
May be try to use Trinity MSOEMkernel and make test with Trinity no "i" users.
I am glad that my Diamond keypad can resolve this new UI graphic problem , i have this also with my Topaz , will make a try but i must create a new keypad .

the.decoy

3rd October 2009, 03:54 PM

CONGRATULATIONS
Dammage i haven't Trinity now to test it , can you tell me what are you did for Slot0 ?

The last couple of builds (that I have had time to port) I have been experimenting with different combo of recmod'ing to SYS modules.

Not sure we are 100% optimised yet but this kitchen and all 4 ROMS have no modules in Slot 0.

Here is one of the memory maps (for 6IETIT):
Memory Map...
SLOT 0: 0x02000000 - 0x01df0000 (END: 0x00060000, 0 MODULES)
0x02000000 - 0x01fe0000 - ROM 0
0x01fa0000 - 0x01df0000 - ROM 1
SLOT 1: 0x04000000 - 0x02060000 (END: 0x02020000, 312 MODULES)
RAM IMAGE: 0x80000000 - 0x80276928
RAM: 0x80277000 - 0x802ac000 - Used for kernel modules
0x802ac000 - 0x83a00000 - 55 MB free

I'm not sure this will be a perfect build ... I had to use the GWES from 23049 (as there is a very weird bug with the YES/NO dialog windows in GWES from 23060) ... but it seems stable enough and lets everyone enjoy the constantly evolving 6.5.x UI :D

Also, I should mention that although I did include the 040C (FRA) SYS for 23060, I didn't get time to use the new initflashes.dat for 040C (it will still be just as you built it).

May be try to use Trinity MSOEMkernel and make test with Trinity no "i" users.

Actually I was going to ask if you wanted me to do that and post it to your Trinity thread. Isn't the OEM packages bundle in your Trinity kitchen different at all from the P3600i? Is it really just the MSOEMkernel that is different?

Anyway, I am not at my build PC right now but I will put a Trinity version topgether and post it as soon as I get a chance.

I am glad that my Diamond keypad can resolve this new UI graphic problem , i have this also with my Topaz , will make a try but i must create a new keypad.

Yeah, although it has just as much trouble with SmartDialing as all the the other canvases (man they are all messed up by this new UI in COM3/4 :rolleyes: )

I spent a few days trying to hack the phcanrc.dll but never managed to do anything useful to move that smartdial listbox down a bit. :confused:

lol, as you may have read I was trying the newer canvas from Mega but not only does it open the dialer on "wake-up" from the power button ... it actually does random calls (to last redial number) every 10-20min :eek:

So yeah, I was pretty thankful for the Diamond canvas (the Pandora Blue also seems to work ok).

Thanks!

RedBux

4th October 2009, 08:46 AM

Great job done !!!!
Though I did not flash couples of latest published roms.
Will flash this .....if time permitted
Regards to all

the.decoy

4th October 2009, 11:11 AM

Thanks guys :)

Just let me know straight away if this ROM behaves flakey in any way ... I had mine refuse to "wake up" (from power button) 2 times and I am hoping I don't have a build bug in there. :eek:

I am a little paranoid after having to transplant the GWES.exe from 23049 and there are 1-2 other build version that the other chefs are using to replace the faulty 23060 GWES (so there are others we can try instead if 23049 is not a good fit).

GWADADA

4th October 2009, 07:01 PM

Hi, I want to flash this ROM on my HTC Trinity (P3600) is it possible what software I should use to spend P3600i at P3600, thank you for your help

the.decoy

5th October 2009, 12:44 AM

Hi, I want to flash this ROM on my HTC Trinity (P3600) is it possible what software I should use to spend P3600i at P3600, thank you for your help

Just wait a day or so and I will be posting a Trinity version.

Were you wanting the normal 0409 (ENG) ROMs or a ROM in 040C (FRA)?
Or just the kitchen (with FRA) to cook your own?

P3P2000

5th October 2009, 12:54 AM

Just wait a day or so and I will be posting a Trinity version.

Were you wanting the normal 0409 (ENG) ROMs or a ROM in 040C (FRA)?
Or just the kitchen (with FRA) to cook your own?

I will wait for the P3600 version too. Thanks for your work.

SuperSport

5th October 2009, 02:48 AM

I hex edited the RUU file and it flashed on my P3600. Is there an easy fix for the Kitchen so that it cooks P3600 by default? I've never looked into that yet... :o

Awesome ROM, Great work! O409 Kitchen for me. ;)

the.decoy

5th October 2009, 03:20 AM

I hex edited the RUU file and it flashed on my P3600. Is there an easy fix for the Kitchen so that it cooks P3600 by default? I've never looked into that yet... :o

:eek: Careful with that method Super ... the hex edit will only fix the bootloader address.

My ROMs are built using the OEM XIP for P3600i and that is different to the Trinity/P3600 (especially the NK that is in there).

Kitchen can be converted pretty easily really (I am going to do it later today) - you just need to replace the KITCHEN-OEM and KITCHEN-ROM-P3600i folder with the KITCHEN-OEM and KITCHEN-ROM-Trinity folders from Chanvi's Trinity Kitchen.

Sorry guys, I will put it together and have posted in next few hours hopefully.

SuperSport

5th October 2009, 04:20 AM

:eek: Careful with that method Super ... the hex edit will only fix the bootloader address.

My ROMs are built using the OEM XIP for P3600i and that is different to the Trinity/P3600 (especially the NK that is in there).

Kitchen can be converted pretty easily really (I am going to do it later today) - you just need to replace the KITCHEN-OEM and KITCHEN-ROM-P3600i folder with the KITCHEN-OEM and KITCHEN-ROM-Trinity folders from Chanvi's Trinity Kitchen.

Sorry guys, I will put it together and have posted in next few hours hopefully.

No Rush, and thank you for the heads up! So far, it's running well, but I'll wait till your Kitchen is complete. Again, Very Nice work.

GWADADA

5th October 2009, 09:17 AM

Just wait a day or so and I will be posting a Trinity version.

Were you wanting the normal 0409 (ENG) ROMs or a ROM in 040C (FRA)?
Or just the kitchen (with FRA) to cook your own?

thank you in advance, I'd like a ROM 40c (knowing your talents, is it possible to make one like it)
[url]http://htcpedia.com/forum/showthread.php?t=304

ps: I can not use the kitchen I think a screen would be welcome. thank you for your wonderful work

the.decoy

5th October 2009, 05:26 PM

OK, here is the prototype for Trinity 23060 ... same as the current P3600i Kitchen (obvious modifications required to ervius/htcrt setup for device)

I have only built the 8IEMANTIT rom (1 WWE and 1 FRA) and I am not posting to the first page just yet. I suspect there is a better way to handle the GWES "PushButton" issue and as soon as I get that sorted I will re-package both the P3600i & Trinity kitchens, recook all the roms and update the links on page1.

Anyway, until then here is a working Trinity kitchen for 23060 and a "Full" build rom in both languages. :)

Kitchen_WWE+FRA_23060_TRINITY (http://www.mediafire.com/?zzyt2d0rmho)

WWE_23060_TRINITY_8IEMANTIT (http://www.mediafire.com/?3t3yjnmkndz) (english, ie8, m2d, titanium)

FRA_23060_TRINITY_8IEMANTIT (http://www.mediafire.com/?xmxn0gkkhez) (french, ie8, m2d, titanium)

Please let me know any bugs you find (I can't test these roms at all, lol :rolleyes:)

P3P2000

5th October 2009, 08:00 PM

GWADADA

5th October 2009, 10:37 PM

GWADADA

6th October 2009, 12:22 AM

ok, thank you for your work, I TEST

HELLO, my side of the French and English ROM does not work, as soon as the update is finished, there is no image, the ROM returns as early in the update,

the.decoy

6th October 2009, 03:49 AM

HELLO, my side of the French and English ROM does not work, as soon as the update is finished, there is no image, the ROM returns as early in the update,

Hmmm :(

So you're saying the ROM update finishes correctly, but then the phone fails to boot? Stuck on HTC screen?

Anyone else tried flashing them yet?

I have just checked with a hex editor and they are definitely using 0x400 boot address ... I built them using the OEM and XIP from last Trinity kitchen (with only Canvas/SmartDialer/VideoTelephony removed). In fact I have just realised that I haven't even used the newer initfashfiles.dat (in WWE) :confused:

the.decoy

6th October 2009, 05:20 AM

Just in case it is due the size of the ROM, here is the 6IETIT rom for you to test:

WWE_23060_TRINITY_6IETIT (http://www.mediafire.com/?hnuqzdyoyny)

I am frankly a bit stumped (and cannot test flash the rom myself) so any more details you can give me would really help.

GWADADA

6th October 2009, 12:31 PM

natan15

6th October 2009, 10:37 PM

excellent job I will test it.:):):)

nat

tchoklat

7th October 2009, 02:18 PM

Hey,

I am really enjoying the ROMs that you produce and confirm that they are getting better, though slower. The larger fonts are gr8!

Could I ask that you make a less resource hungry one, say with Opera as the browser in lieu of IE if this is possible as I am unable to get Opera to work on your ROMs.

There are a lot of apps that are probably not used by a lot and slow the system down.

Perhaps a 'lite' version?

Another request (sorry) what do your anacronyms mean, for example "6IETIT" and "WWE+FRA".

regards tchoklat

PS I do not see donate boutton that I would gladly use! :)

SuperSport

7th October 2009, 05:10 PM

Another request (sorry) what do your anacronyms mean, for example "6IETIT" IE 6 Browser and Titanium and "WWE+FRA". World Wide English + French ----- IE 8 Browser with Titanium & Manilla etc...

Hope this helps! ;)

the.decoy

7th October 2009, 05:58 PM

Thanks Super :)
(hey if you get the chance it would be great if you could test flash one of my trinity roms and let me know if/how they are failing to boot)

@tchoklat
Yes, the WWE/FRA are just the windows codenames for English and French language on ROMs. This kitchen supports building both because the original chefs (Chanvi93 & oggi) are French. However due to demand I concentrate on cooking on WWE roms for download.

The EXT package bundle codenames (eg "6IEMANTIT") were created by Chanvi as quick abbreviations for [version of IE] + [Manila 2D] + [CHome Titanium]
(not a comical reference to "man boobs" :p )

In the past we had several bundles that had Titanium disabled and so the "TIT" did not seem so redundant ... however I feel it has matured now to the point where it is best to include it and just turn it off in "Today Items" if you really want to turn it back into no frills wm5/6 look.

Could I ask that you make a less resource hungry one, say with Opera as the browser in lieu of IE if this is possible as I am unable to get Opera to work on your ROMs.

I am actually still in the process of trying to optimise these ROMs but it is a complex issue when dealing with breeding-edge beta builds of 6.5.x ...

Start by choosing the non-Manila ROMs and maybe see if the IE6 ROM is any leaner for your needs.

However I am very happy to report that I have just finished uploading a newer (better) version of the 23060 Kitchen and ROMs. The links on the first page will be updated in the next few minutes.

Essentially I have modified all the TSK theme files in 23060 to remove the broken "PushButton" image values (invisible OK/Cancel bug), thus allowing me to go back to using the native 23060 GWES (which seems to have quite good memory management and stability).

I have also fixed up some startmenu icon images and changed the MortScript registration to run from config.txt AutoRun during first boot (so that you won't have it pop up every other time you reboot).

There are a lot of apps that are probably not used by a lot and slow the system down.

Perhaps a 'lite' version?

Yeah, unfortunately a lot of those apps will not slow down the system just by being installed (if you don't run them) ... you will only save "storage memory" by omitting them :(

However, I have been meaning to create a new "ultra lite" version. I will indeed leave out any frivolous apps, but I will also look at things like disabling some BT functionality as that chews a lot of background memory. Things like STK services could also be disabled ... I just need to work out what people consider "essential" in a bare bone ROM.

Give me a URL to whatever version of Opera you are trying to use and I will see if I can cook it in there.

PS I do not see donate boutton that I would gladly use! :)

Thanks! I am flattered but don't plan on listing my own paypal. You can always donate to XDA-Dev (http://forum.xda-developers.com/donations.php) or to Chanvi & oggi for starting this kitchen (that I am now just evolving) or even to the member "Da_G" for constantly providing these latest 6.5 beta builds to the XDA-Dev community :D

SuperSport

7th October 2009, 06:18 PM

Thanks Super :)
(hey if you get the chance it would be great if you could test flash one of my trinity roms and let me know if/how they are failing to boot)

I will try them now. Great to hear new version coming.
"WWE_23060_TRINITY_8IEMANTIT": Flash was Successful - Boot Successful. Took a LONG time to finish booting 1st time (2+mins). Probably due to size - Customization LONG Winded and NOT Successful - Hard Reset Successful ;) - ReBoot Successful. Took a LONG time to finish booting 1st time (2+mins). Probably due to size - This time, I left USB Cable on so phone would not sleep. Customization LOOONNNNGGG Winded and Successful (5mins+ Be Patient, it will finish.) - My guess is the Customization adds a LOT of stuff. :confused: - Reboot Successful - Mortscript Window pops up as mentioned. - Runs Quite Smoothly! Although, only about 13-14MB free. :eek: I'm sure on your slimmed down version, this will be fine. Titanium Weather Settings errors out. (Unauth Access Exception)

I think for a Light Version, I would try to leave it as "Microsoft" as Possible. No added software, and No removed software. So people can see what Microsoft intended with this build. If you are working on another version, I may try to create this. ;)

Thanks! I am flattered but don't plan on listing my own paypal. You can always donate to XDA-Dev (http://forum.xda-developers.com/donations.php) or to Chanvi & oggi for starting this kitchen (that I am now just evolving) or even to the member "Da_G" for constantly providing these latest 6.5 beta builds to the XDA-Dev community :D

I'm impressed. A True Gentleman. :)

the.decoy

7th October 2009, 06:38 PM

SuperSport

7th October 2009, 07:56 PM

Uploads are finished.

New and improved 23060 Kitchen & ROMs available on First Post (http://forum.xda-developers.com/showthread.php?t=531661)

As soon as I can work out what is happening with the Trinity Kitchen I will get some new links up for that too (thanks to SuperSport for assistance).

I'm still running it and trying things out. I've got Wi-Fi running, and it all seems smooth, although I've only got 10.98MB Free now, but no lag yet. Edit: Downloading new Kitchen Now.

SuperSport

8th October 2009, 12:02 AM

the.decoy; Using your Kitchen, I just cooked a Lite Version of your ROM. It's much more usable on the Trinity, and still keeps your COOL looks. :cool:

Edit: on the Trinity, 23-24MB Free Ram

Download either Trinity or P3600i versions below (P3600i is the .bak one):

Download (http://www.mediafire.com/?sharekey=34452e2a72b96450ab1eab3e9fa335caf1aabe97 5c6e84e8)
I only HEX edited the Trinity Version, but so far, I have yet to have any trouble with this method. Please use at your own risk.

the.decoy

8th October 2009, 03:20 AM

Wow, thanks a lot Super! :)

I will try them now. Great to hear new version coming.
"WWE_23060_TRINITY_8IEMANTIT": Flash was Successful - Boot Successful. Took a LONG time to finish booting 1st time (2+mins). Probably due to size - Customization LONG Winded and NOT Successful - Hard Reset Successful ;) - ReBoot Successful. Took a LONG time to finish booting 1st time (2+mins). Probably due to size - This time, I left USB Cable on so phone would not sleep. Customization LOOONNNNGGG Winded and Successful (5mins+ Be Patient, it will finish.) - My guess is the Customization adds a LOT of stuff. :confused: - Reboot Successful - Mortscript Window pops up as mentioned. - Runs Quite Smoothly! Although, only about 13-14MB free. :eek: I'm sure on your slimmed down version, this will be fine. Titanium Weather Settings errors out. (Unauth Access Exception)

Well firstly ... Yay! it boots! :D
Everything else we can fix but if the base kitchen I put together didn't make a bootable Trinity then I was stuck.

As for the first boot & customisation, that lengthy wait on first boot is "normal" for these ROMs (as you say, probably due to all the bloat) ... however that customisation problem sounds weird :confused: It shouldn't take that long at all to process the included config.txt as it barely does anything. I did just discover that in the Trinity config.txt there was a call to the HTCBlack.TSK (which I had removed for COM3 compatibility) so may be that was it?

I think for a Light Version, I would try to leave it as "Microsoft" as Possible. No added software, and No removed software. So people can see what Microsoft intended with this build. If you are working on another version, I may try to create this. ;)

Actually that is exactly what I have been slowly trying to work towards ... however because I am still technically maintaining the "Chanvi+oggi" kitchen I felt obliged to not immediately remove anything unless it was incompatible, deprecated or broken. Other than adding Titanium Weather and AT Fave People to CHome, I am not adding anything that Chanvi didn't put there.

That said I have every intention of giving the EXT and OEM setup a complete overhaul ... I just hadn't got around to it yet because I was concentrating on coming up with the best process for optimising the port of new SYS builds.

As I'm sure you know, all the 6.5 builds are very much built for better resources devices than ours and so there is much recmod'ing (and even some package removal) required just to make them run on a TRINxxx.

I want to eventually have a kitchen I have assembled from top to bottom ... so I started the bottom :p

Anyway, I am very nearly finished that bottom layer as I have nice empty Slot0 VM, with almost all SYS components still included, I have changed over to the newer initflashfiles.dat to get back to the "what MSFT intended" setup, and I have built my own Ervius VK to run it all on.

The only thing left now at the SYS level is to identify a few more components that are not viable for our hardware and can be removed (eg: MSTag which requires a higher res camera than we have, VoiceCommand which uses substantial memory with little or no functional benefit, etc).

Additionally I am starting to use Task Manager to examine the memory addresses of all the active modules in use by GWES and shell32, to see if there are any modules I have recmod'ed which then just end up back in SlotO (or worse still RAM) because of "Current process" allocation. Effectively seeing if there are any modules would better recmod'ed than those - to make sure that everything that is always running is in Slot1.

Funnily enough I don't think this kitchen has gotten any more bloated, it is just the newer builds that get a bit slower.

the.decoy; Using your Kitchen, I just cooked a Lite Version of your ROM. It's much more usable on the Trinity, and still keeps your COOL looks. :cool:

Edit: on the Trinity, 23-24MB Free Ram

Download either Trinity or P3600i versions below (P3600i is the .bak one):

Download (http://www.mediafire.com/?sharekey=34452e2a72b96450ab1eab3e9fa335caf1aabe97 5c6e84e8)
I only HEX edited the Trinity Version, but so far, I have yet to have any trouble with this method. Please use at your own risk.

Oh cool! I have been meaning to quiz you about what tweaks you are running in those ROMs of yours.

Question: What Trinity kitchen did you download?? I had removed the one that was linked ... did you find the newer one by just looking in the mediafire folder?

I am very keen to see this modified version you have done ... but as I said, the hex-edit alone ends up very badly on our "i" devices (it may take a few days but then corrupts savagely :eek:).

Any chance you could zip up copy of the modified kitchen for me? Or just an ERV project file (if all you did was disable components)? Or even just detail the changes you made?

Thanks heaps for your help with this Super! My biggest problem lately is not having free time to work on this stuff (I barely slept last night to get the P3600i updating done), so any assistance with the optimising is most welcome.

SuperSport

8th October 2009, 05:23 AM

the.decoy; I just got home, and my wife will be right behind me, so this will be short for tonight. ;)

Most of what you said went right over my head. :o I really am new to all this, and am struggling getting my mind around it all.

The two RUU files I listed were cooked using YOUR P3600i kitchen (Linked), and then I Hex Modded the one for our Trinity. So, you can use the .bak version on your phone without issue.

You are so far beyond me on this stuff, but I would be honored to help in any way I can. Tomorrow, I will try to answer more clearly.

Thanks again for all your hard work, this latest one is REALLY running well on my Trinity. Memory stays constant at 23-24MB with no effort. I've now installed MotoSurf on it, and it functions like it should. (Pretty neat Home Screen if you don't need a lot of free memory.) I think I'll be trying to cook a MotoSurf version that is tweaked to get the most RAM and usability as possible and still maintain all the MotoSurf features.

PS: I like that you are preserving Changi & Oggi's Kitchen. They did such a great job of creating it for us.

the.decoy

8th October 2009, 06:14 AM

the.decoy; I just got home, and my wife will be right behind me, so this will be short for tonight. ;)

hehehe yeah that's why I started so late last night too :o

The two RUU files I listed were cooked using YOUR P3600i kitchen (Linked), and then I Hex Modded the one for our Trinity. So, you can use the .bak version on your phone without issue.

Oh cool, I will do that now. Still is there any chance you can tell me what you did to it?

If it was just a matter of disabling packages in Visual Kitchen, you can save that setup as an ERV file with the "Save ROM" button. It asks you what filename (using \Tools\RomSaved\ folder by default).

The ERV file is just a text file with the list of all enabled/disabled packages and what version IDs were used for XIP/SYS. You could easily attach it to a post here.

Also, did you change the page pool size? I am pretty sure you and Tomme are using them as low as 4M but I have been sticking with 6M so far because it seems to make more efficient use of that extra 2M that just leaving it as available ram.

Our devices are so drastically short on memory that I figure we will never have enough of it "free" ... so I concentrate on making the OS run stable with ~10M ram free (since it always seems to end up around that mark anyway :rolleyes:) by optimising VM and PP.

EDIT: OK, I have flashed that uber-lite ROM now ... OMG! That is seriously cut down to bare bones :eek:

Still curious as to what the full list of things disabled was ... but I suspect that you are gaining a tonne of ram as soon as you ditched CHome and all those BT packages.

LOL, can't say I am a fan of going that lean ... sure it runs really quick but I am basically back to the wm6 I had originally (albeit with a new Start Menu, task bar and window UI elements).

Even still it nice to see the fruit of all my optimising so clear when you strip away all the memory hogging packages that are going on top. Nice work :D

I think I might put together an ERV/EXT config that builds this ROM but give the option to cook the old "HTC Home plugin" into it so that you at least some kind of home screen with msg, launcher and weather widget

SuperSport

8th October 2009, 09:01 AM

I just snuck into the office for a sec. ;)

Yes, I'm using 4MB PP. I've heard that it works better for the Trinity due to our lower initial RAM. I will try one with 6MB though and see what it feels like.

Here is the erv file (change ext from txt to erv). Yes, it is lean, but I was making it so that someone could run SPBMS 3.5 or MotoSurf on it and still get performance. Using your Kitchen as the base, it worked well. It still needs a lot of optimizing (on my part), but I just did a quick and dirty version. I THINK I only turned off items in the kitchen, if I remember correctly.

I notice a couple duplicate icons and such that I will be able to help you track down and remove. And possibly cut down on the folders in the start menu, combine a couple? I also saw somewhere when somebody used Folder icons with smaller images on them so you knew when you were going to a folder as opposed to a program (See attached Icon, this sample is for Communications). Might be a nice touch. I can make those if you know how to enable them?

More tomorrow. :D

PS: I think I might put together an ERV/EXT config that builds this ROM but give the option to cook the old "HTC Home plugin" into it so that you at least some kind of home screen with msg, launcher and weather widget Great Idea! Super Fast, AND Functional.

the.decoy

8th October 2009, 09:50 AM

Yes, I'm using 4MB PP. I've heard that it works better for the Trinity due to our lower initial RAM. I will try one with 6MB though and see what it feels like.

Yeah I have tried both but I must admit that I went to 6MB back on older builds when we had lots more memory leakage ... might be worth trialling 4MB again.

I can definitely see the advantage to 4MB PP on these superlite builds where you aren't in as much danger of running low on real RAM and need to turn to PP mem.

Here is the erv file (change ext from txt to erv). Yes, it is lean, but I was making it so that someone could run SPBMS 3.5 or MotoSurf on it and still get performance. Using your Kitchen as the base, it worked well. It still needs a lot of optimizing (on my part), but I just did a quick and dirty version. I THINK I only turned off items in the kitchen, if I remember correctly.

Cool, got it. I will load that up and have a look (it helps even just knowing what packages the ROM can live without and still function).

I notice a couple duplicate icons and such that I will be able to help you track down and remove. And possibly cut down on the folders in the start menu, combine a couple? I also saw somewhere when somebody used Folder icons with smaller images on them so you knew when you were going to a folder as opposed to a program (See attached Icon, this sample is for Communications). Might be a nice touch. I can make those if you know how to enable them?

Yes, again I am already in the middle of unravelling all the various app.dat & provxml files (and entries in initflashfiles.dat) that Chanvi had used to do that to the Start Menu.

When I changed over to the new initflashfiles.dat I have inadvertently created a few dupes because of the multiple ways in which they were being relocated in the old kitchen.

You may have noticed that I modified the redundant "Utilities" folder (created by the CHome plugin packagess) into a new "CHome Utilities" and assigned it an icon.

I also want to get rid of "ShortCut" and examine the need for keeping both "Tools" and "Utility". I think GPS, M2D and Internet are useful enough to stay.

Anyway it is a juggling acting trying to reign them all in (especially in a multi-lang kitchen like this where you have to do it for both WWE and FRA language start menu folder structures :rolleyes:

You read my mind about the Folder Icons :D
I have been looking for some but not too fond of the ones I have found so far ... primarily because I want to find icons that will look like they belong with the MSFT icons already provided (I don't want to replace everything in some kind of "theme skin" manner, just want to embrace the native wm6.5 icon look).

The way to do it is pretty simple, you actually disabled one of my provxml files that does some of it in your uber-lite:

EXT\COMMON\StartMenu_Icon\files\mxipinit_startmenu _002.provxml

^^^ Disabling that is why your Home, Clock and Sounds icons under Settings-Personal looked a bit oldschool in your uber-lite rom. My fault really ... I should have put that provxml under OEM but I only just worked out what icons needed fixing at the last minute before I uploaded the kitchen yesterday, so it went in EXT where the old broken one was.

EDIT: OK, that's weird - I just checked and you didn't disable that provxml :confused: ... anyway that file is a good example of how to set them

Basically there need to be reg keys/vals (mapping to PNG images) for each shortcut or folder in HKLM\Security\Shell\StartInfo\Start\

Take a look with CE Reg Editor and it is pretty obvious ... it only gets a bit messy with the icons under "Settings" (which are identified by obscure CPL numbers) and some of the important OS icons have their name spelled out in ASCII char numbers (but the icon image filename usually makes it obvious what the icon is anyway).

RedBux

8th October 2009, 12:09 PM

Hi
Thanking you so much for your time and hard work.
I did downloded 23060 earlier released but still didn't flash yet.
Seemed that U upgraded this release I am dl now and will flash soon.

Regards

SuperSport

8th October 2009, 06:46 PM

EDIT: OK, that's weird - I just checked and you didn't disable that provxml ... anyway that file is a good example of how to set them

I will look the provxml file over. Yes, I think that's another example of where settings have been made all over the place to do the same thing. It's too bad Microsoft did not set ALL icons in a single file and just change that file when things change. Same for Layouts, Settings, etc... Should all be in a central place so you don't have to search all over the ROM to make changes.

Maybe it was not MS, but the result of many different cooks getting ahold of these ROMs? Either way, it would be nice to clean one up and make it the starting point for future versions. You are doing great work, and hopefully I can help. As a matter of fact, it might be helpful if others could pitch in? Maybe you could delegate jobs for a number of people to accomplish so each person had less to do? Together, we could come up with a nice clean base?

Then again, sometimes it's easier to do it alone, keep on track, and keep everything as your mind sees it. Too many hands in the Pot and all.

Let me know where I'll be the most help. I may be ADHD, because I tend to bounce all over the place, but I can focus on a task when told what to do. :D

SuperSport

8th October 2009, 10:15 PM

the.decoy

9th October 2009, 06:07 AM

The icons still need work, but this is the general idea I was thinking for Subfolders, so you knew they were not programs. Any ideas? I thought maybe 5-6 total folder categories?

PS: Windows Media is supposed to say Multimedia. I picked the wrong icon to change.

I just noticed I'm still using your older Kitchen. Downloading newer one now.

Please find Sample Icons Attached. I will create any you feel you would like.

Dude, that looks great! :D

I was actually going to say (in response to your other post about how to help) that it would be good if you could sort out the start menu folder icons and maybe think up some ideas for what apps should go where.

Everytime I have tried to get around to this aspect of the start menu I get soooo sidetracked with some new build bug or other kitchen issue .... then never get back around to it :o

It's friday afternoon here so I am about to go "mostly offline" ;) for the weekend but if I get a spare moment on sunday I will start putting together a dedicated EXT package (maybe even put it under OEM) for all of our Start Menu layout/icon enhancements ... a single place where we can round up all the existing miscellaneous reg's dat's & provxml's and keep track of them properly.

One of my biggest concerns with all this was trying to make sure that it would all work properly in a modular nature so we don't keep having the "jenga syndrome" with our packages (i.e. taking out one app inadvertently messes up the setup of others). But I am pretty sure now that if we come up with a unifying Start Menu layout (with folder icons) and implement that at the OEM package level, we then just need to edit all our EXT app.dat's to create their icons in the relevant folders.

So yeah, if you get finished with making folder icons, I would appreciate your input on deciding what apps should where in the new folder structure (lol, especially all the obscure apps that we may not use or even cook into our "lite" roms).

No hurry though. We probably have until the next releasable build is ready before we need it to go public :)

Thanks again Super!

Cheers,
-Decoy

sprint

9th October 2009, 07:26 AM

the.decoy can you make the ROM for P3600?

SuperSport

9th October 2009, 10:51 PM

the.decoy can you make the ROM for P3600?

Hey Sprint. the.decoy mentioned maybe being gone for the weekend. I will say that there will definately be a P3600/Trinity version soon. I am using the Trinity, and it sounds like the.decoy and I will be working on making an organized version using what he's already done. I'm VERY impressed with his organizational skills, so it should be a nice ROM. FYI, this is HIS ROM, and HIS hard work, I'm just going to help weed out some bugs, etc...

Like I said, I use the Trinity, so I will guarantee a Trinity version. Even if I convert the Kitchen after the P3600i version is complete. For the time being, I've been using his Kitchen to cook the ROM, and then I Hex Edit it back to Trinity and it is working fine so far. I would say to use this as a TEMPORARY solution if you really want to use his ROMs.

Is there a particular one you'd like to use? I'd be willing to do the HEX Edit for anyone not familiar with that process. (BUT, beware, it's possibly not as stable as what the.decoy has created. I have not had a problem, but maybe I've just been lucky.)

D@vide

9th October 2009, 11:36 PM

[CUT]
Like I said, I use the Trinity, so I will guarantee a Trinity version. Even if I convert the Kitchen after the P3600i version is complete. For the time being, I've been using his Kitchen to cook the ROM, and then I Hex Edit it back to Trinity and it is working fine so far. I would say to use this as a TEMPORARY solution if you really want to use his ROMs.

hi SuperSport, what about memory leak on 6.5? It would be nice to have the possibility to have chome (titanium) included... are you working on slot 0 to be as free as possible?

Tia
D@vide

ps.
can you hex edit a chome ie6 version as lite as possible? Thank you

SuperSport

10th October 2009, 01:08 AM

hi SuperSport, what about memory leak on 6.5? It would be nice to have the possibility to have chome (titanium) included... are you working on slot 0 to be as free as possible?

Tia
D@vide

ps.
can you hex edit a chome ie6 version as lite as possible? Thank you

the.decoy did mention keeping slot 0 as free as possible See Link Here (http://forum.xda-developers.com/showpost.php?p=4687127&postcount=194). Memory has been stable on the ones I've tried. I'll look at the newest Kitchen and see what I can cook up from it. Again, remember this is the.decoy's work and I'm just playing with it. I don't want to take away from what he's been doing. ;)

Edit: Ok, two versions avail. One is using the Kitchen as is. The other is a Very Lite Chome Version. And just to clarify, they are both cooked using the P3600i Kitchen, then I Hex Edited the RUU files. So they may not be as stable as they should be, but they might be. When the Kitchen is closer to a complete version, either the.decoy or myself, or both, will convert the kitchen to Trinity version. Seeing his work, I know you will be happy with the final cleaned up version.

Lite Chome Version:
22.06MB Free Ram
54.01MB Free Storage
Very Responsive. Some Icons don't work, due to the menu layout that will be fixed in future. Keep an eye out for cool future changes to menu. Access Task Manager in Top Right Corner as normal. The.Decoy has made the icon invisible so it works with this version of the OS.

Download (http://www.mediafire.com/?sharekey=34452e2a72b96450ab1eab3e9fa335cad550ca18 adc49903)

D@vide

10th October 2009, 02:41 PM

the.decoy did mention keeping slot 0 as free as possible See Link Here (http://forum.xda-developers.com/showpost.php?p=4687127&postcount=194). Memory has been stable on the ones I've tried. I'll look at the newest Kitchen and see what I can cook up from it. Again, remember this is the.decoy's work and I'm just playing with it. I don't want to take away from what he's been doing. ;)

Edit: Ok, two versions avail. One is using the Kitchen as is. The other is a Very Lite Chome Version. And just to clarify, they are both cooked using the P3600i Kitchen, then I Hex Edited the RUU files. So they may not be as stable as they should be, but they might be. When the Kitchen is closer to a complete version, either the.decoy or myself, or both, will convert the kitchen to Trinity version. Seeing his work, I know you will be happy with the final cleaned up version.

Lite Chome Version:
22.06MB Free Ram
54.01MB Free Storage
Very Responsive. Some Icons don't work, due to the menu layout that will be fixed in future. Keep an eye out for cool future changes to menu. Access Task Manager in Top Right Corner as normal. The.Decoy has made the icon invisible so it works with this version of the OS.

Download (http://www.mediafire.com/?sharekey=34452e2a72b96450ab1eab3e9fa335cad550ca18 adc49903)

ok, thank you very much SuperSport.
last night I already managed cooking a chome lite version using the last kitchen the decoy have released for trinity, using as guide to clean the rom the .txt file you have published for him. Very responsive and with a 25M free ram at first boot. Now I'm going to try your. ;)

Thanks

D@vide

SuperSport

11th October 2009, 09:24 AM

Hey the.decoy, just wanted to let you know that when you return, I've got a treat for you. I took your Kitchen, Stripped it WAY down, and upgraded it to 23064. (NO Ext Packages and only Camera and Lang in OEM! :eek:) Everything running on it now comes straight from the SYS, which is pretty all inclusive.

The New Lockscreen works, as does the New Contacts App. Also, the latest IE8 works MUCH faster than the previous one. Still slower than Opra, but gaining headway. No Camera, YET.

I've got it running on my Trinity now, and so far, it's running well. I'm going to play with it tomorrow. I'm babysitting my grandson, so between "stuff", I'll be playing with my phone.

Please see attachments.

GWADADA

11th October 2009, 02:57 PM

hi what is the HARD SPL or software that must be added to P3600 trinity to flash the ROM 23,060 of P3600i, thank you

D@vide

11th October 2009, 09:35 PM

der_timo

12th October 2009, 12:04 AM

Yes, please share your Rom or the kitchen! Is it for the trin without "i" too?

SuperSport

12th October 2009, 06:03 AM

This is the.decoy's P3600i Kitchen modified to 23064. It's SuperLite and not fully functional. If he decides to use it, I'm sure he will make it a really nice ROM. It does seem on the Heavy Side as it uses a LOT of RAM, but runs well. Still NO camera yet.

I've also included Two cooked ROMs from the Kitchen. One for Trinity, and one for P3600i.

Download (http://www.mediafire.com/?sharekey=34452e2a72b96450ab1eab3e9fa335caddb6527c bf5fb49c)

the.decoy

14th October 2009, 08:20 AM

Hey guys! Sorry for going off the radar like that ... I was initially just too busy on weekend to get on forum, and then on Sunday night I came down with a real nasty flu. :( Been off work and too sick to even concentrate on a screen at home since then.

I did finally get back onto xda for a few hours yesterday (thanks mostly to Dayquil, lol) and I am back at work today. However taking an unplanned 4-day weekend has got me rather backlogged with work, so I apologise if my progress is a little slow for the next week :o

I did get one good thing done yesterday however ... (see end of post) :D

Thanks for answering Q's while I was gone Super, much appreciated.

hi SuperSport, what about memory leak on 6.5? It would be nice to have the possibility to have chome (titanium) included... are you working on slot 0 to be as free as possible?

While the GWES.exe in 6.5 does seem to keep evolving from build to build, I do think that infamous "6.5 memory leak" is far less dramatic than in the past. There are still the odd bad build versions where it is noticeably bad but now it mostly comes down to properly closing apps (HTC Task Mgr) and effective Slot 0 optimisation.

And YES, as SuperSport mentioned, I have been working on the Slot 0 situation for a while now and I am no longer aiming at the "free as possible" benchmark any more. All my (recent and future) Kitchens will now come setup to build ROMs with ZERO Modules in VM Slot 0.

In short this means I am recmod'ing a very large number of the modules in the SYS packages. All of which then need to be loaded into memory/vm at load/runtime. However I am trying my best to optimise exactly which modules get to stay (and fill up as much of Slot 1 as possible in the process).

Frankly with the tiny 64MB (effectively 55MB) of RAM our devices have available, I don't see any other choice than to make sure the full 32MB (effectively 30MB) of VM in Slot 0 is left free to support the "Active Process" and its memory requirements.

A few apps may seem laggy the first time your run them but at least they will (hopefully) run smoothly :)

Hey the.decoy, just wanted to let you know that when you return, I've got a treat for you. I took your Kitchen, Stripped it WAY down, and upgraded it to 23064. (NO Ext Packages and only Camera and Lang in OEM! :eek:) Everything running on it now comes straight from the SYS, which is pretty all inclusive.

This is the.decoy's P3600i Kitchen modified to 23064. It's SuperLite and not fully functional. If he decides to use it, I'm sure he will make it a really nice ROM. It does seem on the Heavy Side as it uses a LOT of RAM, but runs well. Still NO camera yet.

Whoa! That thing is stripped naked! hehehehe :p

I suspect you might have gone a little too far and that explains some of the broken things like Camera (remember that even the devices that these SYS builds are ported from did have a bunch of OEM packages too, that are necessary for device specific functionality, eg: camera, gps, bluetooth)

Anyway, it was still a very cool little experiment and it saved me having to do all that downloading/unzipping to get a QVGA 23064 SYS setup :D

One reason it ran so heavy on memory was probably the ~8MB of VM in Slot0 that was being used for modules:
Memory Map...
SLOT 0: 0x02000000 - 0x016f0000 (END: 0x00060000, 53 MODULES)
0x02000000 - 0x01fe0000 - ROM 0
0x01fa0000 - 0x01e10000 - ROM 1
SLOT 1: 0x04000000 - 0x02020000 (END: 0x02020000, 273 MODULES)
RAM IMAGE: 0x80000000 - 0x80279928
RAM: 0x8027a000 - 0x802ac000 - Used for kernel modules
0x802ac000 - 0x83a00000 - 55 MB free
... done!

You seem to have done at least some of recmod'ing I usually do, so I have gone through your 23064 SYS and recmod'ed the remaining modules required to squeeze it back into Slot1 only:
Memory Map...
SLOT 0: 0x02000000 - 0x01e00000 (END: 0x00060000, 0 MODULES)
0x02000000 - 0x01fe0000 - ROM 0
0x01fa0000 - 0x01e00000 - ROM 1
SLOT 1: 0x04000000 - 0x02040000 (END: 0x02020000, 296 MODULES)
RAM IMAGE: 0x80000000 - 0x80276928
RAM: 0x80277000 - 0x802ac000 - Used for kernel modules
0x802ac000 - 0x83a00000 - 55 MB free
... done!

However, that isn't all I did to your "skeleton" kitchen ;) ... since it seems we are now quite actively building ROMs for both TRIN models, I have taken your bare kitchen and used it as the basis for a unified P3600I+TRINITY Kitchen.

This was already in my roadmap for the kitchen anyway, but seeing just how many "hex hack" ROMs you were having to do convinced me that I should get it done before any more efforts get duplicated.

No offence to your "superlite", but I do actually plan to put most of the existing EXT packages back into the kitchen before doing a proper release. However for your own purposes, here is a base to build your own kitchens from - that has all the build scripting, HTCRT configs, XIP and OEMs required to build for either model of the TRINxxx family (no more hex edits required). :D

Kitchen_WWE+FRA_23064_P3600I+TRINITY (http://www.mediafire.com/file/kfjh3jjdlit/Kitchen_WWE+FRA_23064_P3600I+TRINITY.7z) (SuperSport beta version)

I am running on a ROM built from it right now (that memory map I posted above) ... but I must stress this is just a test kitchen/rom :eek: ... it has many many missing features, apps, plugins, etc etc. I am posting it for SuperSport (and any other chef who just needs the Kitchen structure to build on).

LOL, but the Camera works :p (actually that is probably because I put most of OEM back in there, hehehe) ... it just doesn't have an app to start it. The only way I can get the camera up is by going via "Pictures & Videos".

I have dumped your 2 EXT packages and just a handful of example EXT packages of my own into \EXT\SHARED\External_Packages\

My plan for future build is to put everything (in EXT) under \EXT\SHARED\ (unless it is a fix/mod that is either device-specific or version-specific). Then we will choose the "6IETIT" or "8IEMANTIT" ROM flavours by loading pre-built ERV files from the "Load ROM" button (which then enable/disable packages to suit that ROM).

Check it out and let me know what you think :)

Cheers,
-Decoy

SuperSport

14th October 2009, 07:47 PM

WHOA! :eek:

I'll report back after flashing, hopefully with something more intelligent than Whoa.

Edit: Ok, the Kitchen is awesome. I don't know how you think these things through. Organizing it into two seperate and yet Singular Kitchens is pretty smart.

When I flashed, it does the Mortscript pause again (1-4 Mins). Not sure yet what that is about. When I use the P3600i kitchen and Hex Edit, I don't get that. Strange??? There is some fixing to be done, as you mentioned, but it's a GREAT start. The Phonepad does not have any skin, just numbers hanging in air, but I've used a phone long enough to remember how it works. ;) The things I see that need work appear to be easy fixes, and mostly asthetic. Thank you for your work on this. I know you don't want to hear this, but I'm already testing 23420 just to see what all the hype is about. :o

the.decoy

15th October 2009, 04:34 AM

Edit: Ok, the Kitchen is awesome. I don't know how you think these things through. Organizing it into two seperate and yet Singular Kitchens is pretty smart.

When I flashed, it does the Mortscript pause again (1-4 Mins). Not sure yet what that is about. When I use the P3600i kitchen and Hex Edit, I don't get that. Strange??? There is some fixing to be done, as you mentioned, but it's a GREAT start. The Phonepad does not have any skin, just numbers hanging in air, but I've used a phone long enough to remember how it works. ;) The things I see that need work appear to be easy fixes, and mostly asthetic. Thank you for your work on this. I know you don't want to hear this, but I'm already testing 23420 just to see what all the hype is about. :o

Ahh, cool. That mortscript thing is something I will have to check out (these are the things it is hard for me to test when only have p3600i). The way I have done it you do definitely need to tap the OK on the mortscript popup to make it continue ... but it sounds more like you are getting the original bug where it just stays locked on the customisation screen with mort stuck in the background.

Phonepad is like that because I didn't include any kind of canvas package and I think there must be a leftover reg key or two in the OEM that is there to enable the old canvas (canvas enabled + no canvas = white dialler). Anyway I would never release a proper kitchen with no canvas package ... this was just a quick mash-up to get the structure together.

Clearly I need to tidy up some more of the differences between the 2 OEM folders (I actually started building it with an \OEM\SHARED\ folder to avoid any duplication but the kitchen would not support it under OEM - it just thought I had added a 3rd device called "SHARED" lol :rolleyes: )

23420 port? Excellent! I am busy porting 23071 to hopefully do our first release version of this kitchen. Good way to split the workload between the COM3 and COM4 branches :cool:

Will post back later today ...

EDIT: Got the SYS ported with a really good recmod setup (slot0 empty, slot1 completely full) ... running a skeleton test rom right now (23071 looks really nice) ... sorry but still kinda wiped out with flu, so not going to get the EXT and OEM finished tonight. :( Will hopefully have something ready and uploaded for the start of the weekend.

chanvi93

16th October 2009, 12:09 AM

SuperSport

16th October 2009, 01:04 AM

EDIT: Got the SYS ported with a really good recmod setup (slot0 empty, slot1 completely full) ... running a skeleton test rom right now (23071 looks really nice) ... sorry but still kinda wiped out with flu, so not going to get the EXT and OEM finished tonight. :( Will hopefully have something ready and uploaded for the start of the weekend.

Great news! Thanks. 23420 is So large that I have a hard time adding any software. Not sure what the differences are between 23063 and 23420, but something. :confused: It looks like the Trinity might be stuck going the route of 23063, 71, etc...

Hi to all and specialy The.decoy + Supersport
I have solved the phoepad too large problem in COM3 build like the latest 23071 from DaG
DL attach folder , replace cprog.exe in SYS-SHARED-COMMON-PhoeRedist, then replace 2 mui files in SYS-SHARED-040...
It work for me with Topaz so i think it will work also with Trinity or P3600i .
Try with my 3 Phonepad completed ( with smartdialing) .

Also i suggest you try to use Resource_Proxy package from Mega if it exist to reduce RAM use.

I just cooked a ROM with these files added, and also the Mega Package mentioned. The phone pad is still without a skin, but it is sized correct. The way I get around the phone issues with most of my cooking is to include the Pandora Dialpad Ext Package. It just makes everything ok when complete, and I like the way it looks. I believe it's the one in your Signature Chanvi. If anybody wants it, let me know.

Thank you for your input, as it is always valuable. :D

chanvi93

16th October 2009, 01:28 AM

If phone skin is desabled it mind somewhere in your kitchen the registry has changed this key
HKLM-Security-Phone and check phone skin is enabled or not , the value must be at 1

the.decoy

16th October 2009, 04:14 AM

Hi to all and specialy The.decoy + Supersport
I have solved the phoepad too large problem in COM3 build like the latest 23071 from DaG
DL attach folder , replace cprog.exe in SYS-SHARED-COMMON-PhoeRedist, then replace 2 mui files in SYS-SHARED-040...
It work for me with Topaz so i think it will work also with Trinity or P3600i .
Try with my 3 Phonepad completed ( with smartdialing) .

Also i suggest you try to use Resource_Proxy package from Mega if it exist to reduce RAM use.

Oh cool, thanks Chanvi. Will definitely be keen to check out that Resource_Proxy (actually want to go through and try out lots of those Mega packages but just keeping up with the COM3 builds and kitchen modifications :rolleyes:).

I take it this is the cprog.exe from a older build then? No compatibility side-effects from replacing the 23071 cprog?

BTW, sorry I haven't yet sent you that detailed list of module recmod's for the Slot0/1 setup I am using ... didn't want to send it until I was more sure about some of the modules I was choosing. Anyway, the recipe I have used for the 23071 recmod's is looking pretty good so I will just clean it up into a spreadsheet and PM it to you when it is ready.

Great news! Thanks. 23420 is So large that I have a hard time adding any software. Not sure what the differences are between 23063 and 23420, but something. :confused: It looks like the Trinity might be stuck going the route of 23063, 71, etc...

Yeah I tread carefully regarding COM4 as it is the "bleeding edge" dev branch and clearly they are developing with much younger (better resourced) devices in mind ... and lately most of the time the good changes end up in COM3 within a few weeks anyway.

I just cooked a ROM with these files added, and also the Mega Package mentioned. The phone pad is still without a skin, but it is sized correct. The way I get around the phone issues with most of my cooking is to include the Pandora Dialpad Ext Package. It just makes everything ok when complete, and I like the way it looks. I believe it's the one in your Signature Chanvi. If anybody wants it, let me know.

Thank you for your input, as it is always valuable. :D

Yeah, I actually found where those leftover canvas reg keys were ... there are a bunch of HKLM-Security-Phone-Skin keys in the RGU file in OEMAPPS. I will remove them from the RGU (probably transplant them into the app.reg for OEM dialer package) in the release kitchen.

To have working (native wm6.5 2G) dialer you can either edit that RGU, or install AdvancedConfig and disable Phone Skin/Canvas (as Chanvi suggested).

Installing Pandora package effectively replaces a broken canvas with a working one.

Anyway, hang in there and I will hopefully have the new kitchen ready in next 24hrs and you can build off it instead.

mac_es

16th October 2009, 12:57 PM

SuperSport

17th October 2009, 12:36 PM

I don't know if you were going to try to incorporate the new Icons into this build or not, but here are some updated ones. A little larger images, and some different ones too.

the.decoy

19th October 2009, 10:05 AM

Thanks for that Super. I do intend to put the new StartMenu folder icons in so that is great.

Sorry I didn't end up posted anything over the weekend ... both me and the wife were still recovering from this nasty flu :( ... did put about 6hrs into it late on Saturday night but I spent most of it bogged down in the boring stuff, like -

dissecting the OEM packages for P3600i and Trinity, trying to work out differences and things that need to be copied between them
testing compatibility of some of newer MEGA packages (for replacing OEM apps with) - not much success there I'm afraid
working out how I broke the camera button - had some success on that front (it was just a line missing in new initflashfiles.dat that copies the Camera.lnk to \Windows\AppButtons\ folder )

So, I still don't have the kitchen ready yet ... but if anyone is desperate to just get the TRIN-prepped 23071 SYS/ROM folders from me I can zip them up for you to put into whatever kitchen you currently have.

@mac_es + chanvi + oggi + anyone who knows

Can someone please help me with a bit of history on these 2 ROM folders (P3600I & TRINITY) I am working with here?

Are they both really WM6.1 native kernel versions of OEMXIPKernel ?

Why does the Trinity Boot.rgu seem to be using the initvmmap.exe trick for mapping the modules used by device.exe, and enabling the DeviceStacks (Slot59) feature, but not for the P3600i ?? :confused:

Has the Trinity got a 6.1 NK.exe but not the P3600i?

What is the deal with these two WM6.1 "features" anyway? All I can find are a few scattered posts on the entire internet which just seem to cut+paste them verbatim from each other, and vaguely refer to them as making memory better :rolleyes: (yes I have read through this (http://hi.baidu.com/donghaozheng/blog/item/1a0f37db4798196ed1164e56.html) and understand that much but I want to know if anyone has done any experimenting or has more detailed info on utilising them).

Where did we get that list of DLLs and are we sure they are only used by device.exe?

Also, by comparison the Trinity Boot.rgu is also missing the StorageManager keys for EXT Roms (EXT_FLASHDRV) and the mysterious DRM keys (LSOMACORE/LSFilter/TimeWizard.exe) :confused:

Sorry I know this is some heavy chef-only kind of stuff to be asking in this thread but I kind of need to know about it specifically in reference to the TRINxxx family of devices. :o

@chefs: Thanks for your help :)

@everyone else: Thanks for you patience :)

SuperSport

19th October 2009, 10:30 AM

mac_es

19th October 2009, 02:11 PM

@mac_es + chanvi + oggi + anyone who knows

Can someone please help me with a bit of history on these 2 ROM folders (P3600I & TRINITY) I am working with here?

Are they both really WM6.1 native kernel versions of OEMXIPKernel ?

Yes, indeed in trinity is possible to use P3600i nk.exe but to avoid to lost internal encrypt keys, you should modify os to get them stored in registry and not in files. (it is a registry key in boot.rgu)

Why does the Trinity Boot.rgu seem to be using the initvmmap.exe trick for mapping the modules used by device.exe, and enabling the DeviceStacks (Slot59) feature, but not for the P3600i ?? :confused:

What is the deal with these two WM6.1 "features" anyway? All I can find are a few scattered posts on the entire internet which just seem to cut+paste them verbatim from each other, and vaguely refer to them as making memory better :rolleyes: (yes I have read through this (http://hi.baidu.com/donghaozheng/blog/item/1a0f37db4798196ed1164e56.html) and understand that much but I want to know if anyone has done any experimenting or has more detailed info on utilising them).

Where did we get that list of DLLs and are we sure they are only used by device.exe?

Has the Trinity got a 6.1 NK.exe but not the P3600i?

It is because the original trinity rom comes whith it. though they are quite useless.

It says to load and keep some dlls into memory when device.exe process is up (everytime)

It is interesting for example if you have a dll associated to a process which is not running everytime...

initvmap initialization in boot.rgu can cause trouble whith 6.5 os, I have remove it. And the last time I take a look into chanvi's kitchen neither he.

Also, by comparison the Trinity Boot.rgu is also missing the StorageManager keys for EXT Roms (EXT_FLASHDRV)

As we cook whith extended flag when we generate the new imgs there is no an extended rom to load, so why to keep a driver loaded to do nothing.

and the mysterious DRM keys (LSOMACORE/LSFilter/TimeWizard.exe) :confused:

Whith out this the drm is not working. The most visible issue is not to be able to change the ringtone.

If you use discretix drm you don't need them. I have moved to the drm package.

Sorry I know this is some heavy chef-only kind of stuff to be asking in this thread but I kind of need to know about it specifically in reference to the TRINxxx family of devices. :o

@chefs: Thanks for your help :)

@everyone else: Thanks for you patience :)

If you don't ask, you don't learn.

Ah! 23071 is running fast in trinity and the ram manage is good but if trinity goes into sleep mode it doesn't resume.... :mad: at least, for me.

the.decoy

19th October 2009, 03:45 PM

@SuperSport: Thanks man. Here is the 23071 SYS+ROM bundle (http://www.mediafire.com/?znmmnzmtqm4) . Since this is from my new kitchen there has been no EXT conversion for CHome, Lockscreen, IE8 or anything else (I am just enabling/disabling those things via the ERV file recipes).

You can fix the broken Camera button (and other button issues) just by editing the initflashfiles.dat (use the internal editor in ervius kitchen). Find the following section and add the extra lines I have put in blue:

; App Button default links
Directory("\Windows\AppButtons"):-File("\x0043\x0061\x006C\x0065\x006E\x0064\x0061\x0072\x 002E\x006C\x006E\x006B","\Windows\calendar.lnk")
Directory("\Windows\AppButtons"):-File("\x0043\x006F\x006E\x0074\x0061\x0063\x0074\x0073\x 002E\x006C\x006E\x006B","\Windows\addrbook.lnk")
Directory("\Windows\AppButtons"):-File("\x0054\x0061\x0073\x006B\x0073\x002E\x006C\x006E\x 006B","\Windows\tasks.lnk")
Directory("\Windows\AppButtons"):-File("\x0052\x0065\x0063\x006F\x0072\x0064\x002E\x006C\x 006E\x006B","\Windows\voice.lnk")
Directory("\Windows\AppButtons"):-File("camera.lnk","\Windows\camera.lnk")
Directory("\Windows\AppButtons"):-File("Recorder.lnk","\Windows\Recorder.lnk")
Directory("\Windows\AppButtons"):-File("VoiceSpeedDial.lnk","\Windows\VoiceSpeedDial.lnk")

@mac_es: Many thanks! That was very helpful indeed :)

It is because the original trinity rom comes whith it. though they are quite useless.

It says to load and keep some dlls into memory when device.exe process is up (everytime)

It is interesting for example if you have a dll associated to a process which is not running everytime...

initvmap initialization in boot.rgu can cause trouble whith 6.5 os, I have remove it. And the last time I take a look into chanvi's kitchen neither he.

A ha! I thought the same thing :rolleyes: (i.e. why device.exe when that is always running, lol)

What about the DeviceStacks (LoadHigh) key? Any use in that one?

As we cook with extended flag when we generate the new imgs there is no an extended rom to load, so why to keep a driver loaded to do nothing.

Hmmm, ok cool.
I am curious though ... because lately I have been thinking about making up my own EXT rom .nb with cabs of all the large apps/plugins which I am currently cooking into main ROM as EXT packages (that way just install them during AutoRun and they will not leave all those leftover files in \Windows\). HTCRT seems to have the option to build final NBH with a EXT rom included.

Whith out this the drm is not working. The most visible issue is not to be able to change the ringtone.

If you use discretix drm you don't need them. I have moved to the drm package.

Yeah that's what I thought ... I guess chanvi had moved those keys to somewhere else in the Trinity OEM setup ... because they aren't in the Trinity boot.rgu I have from his last kitchen.

Ah! 23071 is running fast in trinity and the ram manage is good but if trinity goes into sleep mode it doesn't resume.... :mad: at least, for me.

Yes it is mildly disturbing ... I have also seen this happen a few times since 23064 :( ... used to happen a lot when I first started using wm6.1 roms (especially Trinity roms with the nosedive "mod_i" fix on them)

As an experiment I have been avoiding the use of my power button to put phone to sleep manually (I just "lock" it and let it go to sleep by itself). This seems to have stopped it from happening but then again I have also been running some very cut-down roms lately as I am testing combinations of packages in new kitchen. So my evidence is not exactly scientific as yet :o

Thanks again for the info!

mac_es

19th October 2009, 04:10 PM

A ha! I thought the same thing :rolleyes: (i.e. why device.exe when that is always running, lol)

What about the DeviceStacks (LoadHigh) key? Any use in that one?

You can put it, though I don't know if it is doing something..

Hmmm, ok cool.
I am curious though ... because lately I have been thinking about making up my own EXT rom .nb with cabs of all the large apps/plugins which I am currently cooking into main ROM as EXT packages (that way just install them during AutoRun and they will not leave all those leftover files in \Windows\). HTCRT seems to have the option to build final NBH with a EXT rom included.

Why in extrom? you can put the cabs in \windows\ folder as well. The ExtRom is another nb to include in nbh, nothing else. You can create the "imgfs" of the externalRom whith TFAT_Image_Editor_1.2.0.14.exe (in this board)

Yeah that's what I thought ... I guess chanvi had moved those keys to somewhere else in the Trinity OEM setup ... because they aren't in the Trinity boot.rgu I have from his last kitchen.

I don't know. Knowing my kitchen is enough

Yes it is mildly disturbing ... I have also seen this happen a few times since 23064 :( ... used to happen a lot when I first started using wm6.1 roms (especially Trinity roms with the nosedive "mod_i" fix on them)

As an experiment I have been avoiding the use of my power button to put phone to sleep manually (I just "lock" it and let it go to sleep by itself). This seems to have stopped it from happening but then again I have also been running some very cut-down roms lately as I am testing combinations of packages in new kitchen. So my evidence is not exactly scientific as yet :o

Thanks again for the info!

For me, no diff. I have tired whith/whithout lockscreen, removing autostartup thihngs, chome plugins... so I have gone back to 23052, really stable version for me.

AkshayGenius

19th October 2009, 04:55 PM

There is no reference to the link for P3600 from where you have taken the ROM and converted for P3600I. Can you provide the same?

This thread is for the P3600i variant of Chanvi93's Trinity Kitchen for all. For full details and history of this Kitchen please refer to his original thread:
http://forum.xda-developers.com/showthread.php?t=513421

Whenever Chanvi releases a new Trinity Kitchen, I will try to post the P3600I ported version on here soon there after (or as soon as I can get it done), along with a few of the the more popular "EXT Builds" (package bundles) of that release precooked into ROMs.

================================================== =======
CAVEATS:

If you have never installed a new ROM before, GO HERE FIRST (http://forum.xda-developers.com/showthread.php?t=399779) (or else you brick your phone)
Kitchen requirements: XP/Vista 32bit with Microsoft .NET Framework 2.0 (http://www.microsoft.com/downloads/details.aspx?familyid=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5) Service and Microsoft .NET Framework 3.0 (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=10cc340b-f857-4a14-83f5-25634c3bf043) Service Pack 2, also Microsoft Visual C++ 2005 (http://www.microsoft.com/downloads/details.aspx?familyid=32BC1BEE-A3F9-4C13-9C99-220B62A191EE) Redistribuable and 2008 (http://www.microsoft.com/downloads/details.aspx?familyid=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF) from MS official site.
P3600i ONLY - These Kitchens & ROMs are NOT for the Trinity/DoPod/P3600 models (see original Trinity thread (http://forum.xda-developers.com/showthread.php?t=513421))

IMPORTANT! Builds after 21900 have the ADC driven network auto-config so you will need to disable any call to Configuration_Network.cab in your SDConfig.txt. Otherwise you get 2 different prompts to setup your network provider (which doesn't break anything it is just redundant :rolleyes:)

================================================== =======
RE-RELEASE (23060.5.3.0): 08-10-2009

Sorry for the false-start everyone :o but there were some major issues that I have resolved with 23060 so I felt it best to just re-package and replace.

Following changes to 23060:

Now using native GWES (have instead rebuilt theme files to mitigate "PushButton" bug)
Fixed phantom "MSAlarms" shortcut and many other Start Menu icon glitches from new initflashfile.dat
Changed MortScript registration to run once (only) during first boot AutoRun (no more pop up on every boot)
Disabled ASyncKiller and AutoDLGkiller as they were not saving as much memory as they were using (autoHibernate still included)
Modified the Visual Kitchen HTCRT scripting to properly support WWE or FRA nbh builds (and support for Splash1 & Splash2 screen nb files)

NOTE: With the new MortScript install, you will get that familiar popup on the first boot just AFTER Date/Time/Password config and BEFORE the SDAutoRun starts, so it will wait until you tap it to continue and start installing cabs from your SDConfig.txt (it will eventually time out and continue by itself but that will take like 1-2min - best to just tap it yourself)

Kitchen:
WM6.5.x QVGA WWE+FRA P3600I Kitchen 23060.5.3.0 (http://www.mediafire.com/?m0yunzycymo) [COM3 branch]

ROMs:
WWE_23060_P3600I_6IETIT (http://www.mediafire.com/?omjjhxn2ryc) (IE6 with Titanium, includes TitaniumWeather and ATFavePeople)

WWE_23060_P3600I_6IEQMTIT (IE6 with QuickMenu and Titanium, includes TitaniumWeather and ATFavePeople)
*Note: Although new Start button is on bottom bar but you must still press top left corner for QM start menu

WWE_23060_P3600I_6IEMANTIT (http://www.mediafire.com/?oyvhj0w2jhl) (IE6 Full with M2D and Titanium, includes TitaniumWeather and ATFavePeople)

WWE_23060_P3600I_8IETIT (http://www.mediafire.com/?zcmkommyz3z) (IE8 with Titanium, includes TitaniumWeather and ATFavePeople)

WWE_23060_P3600I_8IEMANTIT (http://www.mediafire.com/?mn4tjzjjdac) (IE8 Full with M2D and Titanium, includes TitaniumWeather and ATFavePeople)

Screen caps:

http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi1.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi2.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi3.jpg
http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi4.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi5.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/23060_Chanvi6.jpg

================================================== =======
RELEASE (23060.5.3.0): 02-10-2009 (RE-RELEASED - packages have been updated and replaced)

I have ported the latest COM3 build (23060) into the kitchen, replaced the dialler with Diamond style canvas (to fix invisible "dialing number" bug) and used the latest initflashes.dat (new MSFT startmenu layout changes).

================================================== =======
RELEASE (23041.5.3.0): 10-09-2009

This is my P3600i release of Chanvi's 23041 Trinity Kitchen. I have used my own VK1.8.1/HTCRT kitchen but the SYS is CHanvi's and EXT is pretty much still the same as previous releases. I have added some "Mods" under EXT\Shared\ that are kinda necessary in this new 6.5.1 UI, and I rebuilt the Applications panel in Titanium using the layout from CLauncher instead (Chanvi had been recycling the WelcomeCenter panel but this seems to have issues now). I also did some extra module->file conversion to free up a little more virtual memory in Slot 0 (if you don't know what that means, don't worry about it :o )

Be warned, we are now into the COM3/COM4 branches which means WM 6.5.x and all the chunky new UI and fonts that go with it.

NOTE: IF YOU TRY TO CHOOSE ANY OF THE THEMES OTHER THAN CLASSIC BLUE IT WILL BREAK THE NEW 6.5.x UI
(MSFT are changing the UI slightly every build right now and they are only bothering to make Classic Blue work properly. Search XDA and you can also find a few custom themes that have been rebuilt to suit 2304x builds.)

AND
FIX (for pixel glitches at bottom of lockscreen):
Copy these CPR files (http://forum.xda-developers.com/attachment.php?attachmentid=226520&stc=1&d=1252670681) into \Windows\

Kitchen:
WM6.5.x QVGA WWE+FRA P3600I Kitchen 23041.5.3.0 (http://www.mediafire.com/?nodld5emmnw) [COM3 branch]

ROMs:
WWE_23041_6IETIT_P3600I (http://www.mediafire.com/?3mwz4mdkdxy) (IE6 with Titanium, includes TitaniumWeather and ATFavePeople)

WWE_23041_6IEMANTIT_P3600I (http://www.mediafire.com/?umtrmguumdz) (IE6 Full with M2D and Titanium, includes TitaniumWeather and ATFavePeople)

WWE_23041_8IEULITE_P3600I (http://www.mediafire.com/?kefammdqldt) (IE8 UltraLite)

WWE_23041_8IEMANTIT_P3600I (http://www.mediafire.com/?wwgmz0hrqku) (IE8 Full with M2D and Titanium, includes TitaniumWeather and ATFavePeople)

================================================== =======
HISTORY BELOW THIS ARCHIVED

Due to forum post char limit, release history below this point is archived here (http://forum.xda-developers.com/attachment.php?attachmentid=226522&stc=1&d=1252671335).

dan15

19th October 2009, 05:01 PM

For me, no diff. I have tired whith/whithout lockscreen, removing autostartup thihngs, chome plugins... so I have gone back to 23052, really stable version for me.

Curious, i had also this issue with 23071. i come back to Lockscreen in module dll and all is OK now. of course, i didn't try to recmod again lockscreen to see if it's the real effect or not :-)

mac_es

19th October 2009, 05:58 PM

Curious, i had also this issue with 23071. i come back to Lockscreen in module dll and all is OK now. of course, i didn't try to recmod again lockscreen to see if it's the real effect or not :-)

Oh! I haven't cook the lockscreen stuff... til now it was working the old lockscreen. I didn't cook it because of the delay when it is in sleep mode and someones rings you...

When I tried the lockscreen I recmoded it to a file. So, you are saying to keep it as a module?

I will try it when I flash again...

the.decoy

20th October 2009, 12:47 AM

There is no reference to the link for P3600 from where you have taken the ROM and converted for P3600I. Can you provide the same?

:confused:
The link is right there in that first sentence you just quoted?? (BTW, please don't quote the entire first post, that just wasted a whole page for some people :eek: )

However Chanvi now works on a new device so his last Trinity release was 23041. The 23060 release is one that I have ported from scratch myself (for P3600i).

I did try and make a Trinity (P3600) version of the kitchen and some ROMs here (http://forum.xda-developers.com/showthread.php?p=4669213#post4669213) ... although without being able to test it myself, it would appear that there are a few small bugs in them.

The new kitchen I am currently working on will build the same ROM for both Trinity and P3600i, but I am not quite finished that yet.

If you read back through the last few pages you will see that SuperSport did actually hex edit the bootloader address in some of my 23060 ROMs (so that it would boot on a P3600). Maybe one of those will be what you are after?

the.decoy

20th October 2009, 01:03 AM

Why in extrom? you can put the cabs in \windows\ folder as well. The ExtRom is another nb to include in nbh, nothing else. You can create the "imgfs" of the externalRom whith TFAT_Image_Editor_1.2.0.14.exe (in this board)

Yeah the original plan was to just put them in \Windows\ but I had the idea of extrom because that would mean even less files in the total file count for \Windows\. It's just an idea I was curious about :o

I guess adding an extrom would waste some of the overall storage mem though wouldn't it?

Oh! I haven't cook the lockscreen stuff... til now it was working the old lockscreen. I didn't cook it because of the delay when it is in sleep mode and someones rings you...

When I tried the lockscreen I recmoded it to a file. So, you are saying to keep it as a module?

I will try it when I flash again...

Oh, I have been using the official Lockscreen i each of the builds (I know about the delay issue but it really doesn't bother me that much).

Not recmod'ing it is definitely the consensus of opinion in the Da_G porting thread.

mac_es

20th October 2009, 09:01 AM

Yeah the original plan was to just put them in \Windows\ but I had the idea of extrom because that would mean even less files in the total file count for \Windows\. It's just an idea I was curious about :o

I guess adding an extrom would waste some of the overall storage mem though wouldn't it?

It is simply, we have a limted amount of storage for: XIP+IMGS+EXTROM

If you use extrom you decrease the available size of imgfs.

Oh, I have been using the official Lockscreen i each of the builds (I know about the delay issue but it really doesn't bother me that much).

Not recmod'ing it is definitely the consensus of opinion in the Da_G porting thread.

I have readed the thread, but I didn't think about its dependency because it fails whithout locking it. I mean, it boots up, I press the power button once to go to sleep mode. Then it fails to resume, in 23052 (and older) it resumes whithout locking.

mac_es

20th October 2009, 10:22 AM

I have tried whith lockscreen as a module and it doesn't resume. The lockscreen works, but it doesn't resume...

chanvi93

21st October 2009, 01:59 PM

Hello
I include this soft in COM3 , it's very useful and complete the missing X or OK to close program and other possibility .
Original from Japan : http://soft.photoracer.net/docs/wktask_en.html

I have customized to black taskbar and more , this is my package for QVGA

EDIT: Oups the app.dat is for FR version , just change Menu Démarrer to Start Menu and Programmes to Programs , Outils to Tools in the end of app.dat

_X_

22nd October 2009, 05:29 AM

Oh, I have been using the official Lockscreen i each of the builds (I know about the delay issue but it really doesn't bother me that much).

Not recmod'ing it is definitely the consensus of opinion in the Da_G porting thread.

How did you made original lockscreen working when power buttons is pressed? I've been looking for some info on that one and not found any that actually works.

SuperSport

22nd October 2009, 05:36 PM

How did you made original lockscreen working when power buttons is pressed? I've been looking for some info on that one and not found any that actually works.

In one of those ROMs you were looking at earlier, they were using S2U2 for the lockscreen. That locks the phone automatically when it's turned off or goes to sleep.

I tried a little program called AutoLock which works pretty well. You will find it attached to this message. Good Luck!

_X_

22nd October 2009, 05:40 PM

In one of those ROMs you were looking at earlier, they were using S2U2 for the lockscreen. That locks the phone automatically when it's turned off or goes to sleep.

I tried a little program called AutoLock which works pretty well. You will find it attached to this message. Good Luck!

Thanks! Will try it ...

BTW ... how does it work? detects when Power button is pressed and locks device? Or I have to assign it to some other button?

SuperSport

24th October 2009, 05:28 AM

Thanks! Will try it ...

BTW ... how does it work? detects when Power button is pressed and locks device? Or I have to assign it to some other button?

Detects when the phone is turned off or goes to sleep. Both are configurable.

_X_

24th October 2009, 01:54 PM

Thanks, just what I need :)

the.decoy

26th October 2009, 02:16 PM

23071 and 23081 XIP+SYS update packs are linked on first page.

Sorry, is all I had time to do :(

RedBux

26th October 2009, 05:34 PM

Appreciate all job done by you, will be waiting for your proper incoprated kitchen for 20371/81

SuperSport

26th October 2009, 08:04 PM

Thank you! You keep doing the hard work and letting everyone benefit from it. Will be nice to see your release kitchen, but in the mean time, this is great. I've been messing around with cooking more stuff, and I'm seeing it takes a LOT of time to make a ROM that works well and looks good. I'm still trying to get it right.

Take your time, and thanks again!

the.decoy

27th October 2009, 12:26 AM

Thanks guys :)

The big problem is that all my more recent kitchen files are in the Combo Trinity/P3600i kitchen I am working on. Otherwise I would have just pasted those XIP+SYS files into it and uploaded.

The Combo kitchen isn't quite ready for release because ... well, the more I start to delve into the OEM structure (to examine what exactly is different/better/worse) between the two device OEM folders, the more I was learning about how it all was strung together. Anyway I in the middle of reading/editing every single RGU file in the OEM and moving various files around to tidy things up.

I am very close though. Just absurdly busy with work (at the office) and work (on the house at home).

Quick mention about those two builds ... I have yet to even cook a ROM with the 23081 build (I literally uploaded the moment I finished porting), so if there are any issue pls let me know.

Whereas 23071 is actually pretty damn solid. I have been running it on my phone for 2 weeks now with no crashes at all. There are many reports of issues with it "not coming back from sleep" ... although oddly I have not had that myself.

Thanks all for your patience. I am glad there are so many other active TRIN* cooks at the moment so it hopefully isn't so painful that I am not as productive lately :o

SuperSport

27th October 2009, 02:19 AM

the.decoy

27th October 2009, 02:44 AM

I cooked a real quick 23081 and it's nice. Seems solid. Maybe a bit slow, but I'll try to tweak it a bit.

Cool, how does it stack up against 23071? (I think you had tried that already hadn't you?)

Also, not sure exactly how much speed/ram it saves ... but I should mention that I am slowly building a list of SYS packages that, despite having included them in the SYS bundle, I am disabling (in Kitchen) pretty much by default.

It's basically because I don't need/want them but they do actually work ok and I don't want to be depriving others the chance to use them if they wish (and all of them are recmod'ed such that their inclusion/exclusion has no effect of VM Slot0 anyway).

So far that list is:

Livesearch (not bad but would be more useful if I lived in US)
Skybox (aka "Microsoft My Phone")
Transcriber
VoiceCommand
VoIP
VoiIPOS
WMMoneyWidget
WMWeatherWidget

So yeah, when I say that I am running a 23071 test ROM right now, it is basically that XIP+SYS pack, with these SYS packages disabled (and just the basic EXT packages for CHome plugins and some essential COMMON utility packages).

You may have noticed that I am deleting the WindowsLive SYS packages from these packs and that is because the included version is inferior to the one you can very easily download/install using SkyMarket (and deleting it saves me a whole lot of module conversions). If I can somehow get my hands on the CAB for that version from SkyMarket I might include that instead.

SuperSport

27th October 2009, 05:44 AM

Cool, how does it stack up against 23071? (I think you had tried that already hadn't you?)

Also, not sure exactly how much speed/ram it saves ... but I should mention that I am slowly building a list of SYS packages that, despite having included them in the SYS bundle, I am disabling (in Kitchen) pretty much by default.

It's basically because I don't need/want them but they do actually work ok and I don't want to be depriving others the chance to use them if they wish (and all of them are recmod'ed such that their inclusion/exclusion has no effect of VM Slot0 anyway).

So far that list is:

Livesearch (not bad but would be more useful if I lived in US)
Skybox (aka "Microsoft My Phone")
Transcriber
VoiceCommand
VoIP
VoiIPOS
WMMoneyWidget
WMWeatherWidget

So yeah, when I say that I am running a 23071 test ROM right now, it is basically that XIP+SYS pack, with these SYS packages disabled (and just the basic EXT packages for CHome plugins and some essential COMMON utility packages).

You may have noticed that I am deleting the WindowsLive SYS packages from these packs and that is because the included version is inferior to the one you can very easily download/install using SkyMarket (and deleting it saves me a whole lot of module conversions). If I can somehow get my hands on the CAB for that version from SkyMarket I might include that instead.

I think it's Very similar to 23071. There's a new Magnifier in the taskbar now and I've heard some other things I don't currently remember. I've tweaked the memory a little and it definitely helps. I'll try to narrow down those tweaks for you if interested.

It's funny, when I cook my own ROMs, I leave out ALL the Live stuff. I prefer to download them when I want them, so as far as I'm concerned, good move. :D I know that's a matter of opinion.

PS: Live Search, (Now Bing), is VERY handy in the US. I do like that one, and usually download the latest version after I flash a ROM.