Touch Screen not working HELP!!!

[rx7zone]

Two days ago my phone started to freeze up and the touch screen wouldn't work sometimes. Yesterday the phone froze so I pressed the reset button and when it turned back on the touch screen stop working for good. So I decided to do a master reset hoping it will work again, and now Im stuck on the windows mobile screen (green) and it says "tap the screen to set your windows mobile based device" but my touch screen doesn't work. Don't no what to do, the phone is stuck on this screen, please help!

[akademik_acheeba]

this happened to me the other day. it was because of a program i had installed. all i had to do is uninstall the program and soft-reset. you shouldnt have master resetted. now you have to reflash your phone. what service and phone do you have? check the other posts for your oem rom. if you cant find it i'll help you with reflashing. good luck.

[nikmel420]

could b an easy fix wen it happened to me i was freakin i read somewere even the smallest thing between the screen and i dont a good word for it . were the srceen meets the phone one corner of my screen protecter was just between them the smallest peice in there took out my screen i anmost took it to get fixed im not saying u wont but make sure u clean the edges make sune theres nothing u in there first gl

[sprogo]

I have the same issue too, after hard-resetting the pda (HTC P4350) it is stuck on green screen with message " tap the screen to set up your windows mobile based device". The problem is touch screen of it is not working for quite a long time and because of this i have been using another p4350, but i think i am so careless and after dropping the second one into the water (it stayed only 3-4 seconds) its usb syncronization stopped to work, it can be charged but no data connection through usb cable (i have checked 3-4 different usb cables). Now i have a lot of information saved in the second one and i need to sync it with pc without using usb cable. I have planned to substitute pim.vol file of the first one with the second, then i will connect the first one to usb and finally sync. But this green screen really make me dissappointed.

Can anyone help me on this matter.
Thank you for all (at least for reading my problem)

[akademik_acheeba]

i have the same issue too, after hard-resetting the pda (htc p4350) it is stuck on green screen with message " tap the screen to set up your windows mobile based device". The problem is touch screen of it is not working for quite a long time and because of this i have been using another p4350, but i think i am so careless and after dropping the second one into the water (it stayed only 3-4 seconds) its usb syncronization stopped to work, it can be charged but no data connection through usb cable (i have checked 3-4 different usb cables). Now i have a lot of information saved in the second one and i need to sync it with pc without using usb cable. I have planned to substitute pim.vol file of the first one with the second, then i will connect the first one to usb and finally sync. But this green screen really make me dissappointed.

Can anyone help me on this matter.
Thank you for all (at least for reading my problem)



use the buttons to navigate to the screen alignment setting...[press the windows key, navigete to settings and click, scroll to bottom tab system, click on screen. Navigate to align screen and click, then use stylus to recalibrate. Hope it works.