Dead in bootloader !

[god_love_power]

Hi, my univversal is dead in bootloader at serial mode and when I connect it to my PC with usb cable it recognize it as an Unknown devices and my phone still stand in serial mode!
I was trried all the method I found like:
I went to device manager of my PC an re-install my usb--didnt work
shut down usb and active synch (with task manager) and ry mtty program-- dident work
I change my usb cable and change te mini usb gate of my phone!-- didnt work
:confused:
Plz help me!!!!!!!!

[rajivshahi]

Hi, my univversal is dead in bootloader at serial mode and when I connect it to my PC with usb cable it recognize it as an Unknown devices and my phone still stand in serial mode!
I was trried all the method I found like:
I went to device manager of my PC an re-install my usb--didnt work
shut down usb and active synch (with task manager) and ry mtty program-- dident work
I change my usb cable and change te mini usb gate of my phone!-- didnt work
:confused:
Plz help me!!!!!!!!


Hi welcome to the forum.... try following
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial

http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
(try method 2)

and try to change the computer usb ports...try different usb ports of the computer and try flashing to tomals 8.5 or 8.7 ...

Cheers
Rajiv

[god_love_power]

Thank you rajivshahi for your answer and attention.
I had try all the methods that I find in hole of internet!!
also I tried your suggstted method. I was connect my phone with ans without SIM and memory to each USB port of my (and another) PCs, I changed my USB cable for several times, I also tried Uni_bootloader program and MTTY but they didn't work (because there is no USB connetion with my UNI and my PC)

I just keep crying!!!!!!

[orb3000]

Have you tested doing Doc format?


Hope it helps,

[enigma1nz]

If the device is not recognised by PC at the same time as Serial not changing to USB, I would think your USB port is no longer attached as it should and can cause the problem you described. From time to time USB port might still feel and look secure on mainboard, it will even charge the device, however, when it comes to AS and USB connection to PC, it will not connect properly.

That, or your PC USB or motherboard are malfunctioning. Try other USB devices in the same ports.

[god_love_power]

My PC's USB ports are work properly because as you told enigma1nz, I had test them with another devices
For the DOC format method: there is no USB port for connecting with MTTY!
Soooooo amazing!
(thanks for all your answers)

[god_love_power]

So, it means there is no way for me:(:(:(:(:(:(:(:(:(:(

[tomal]

hey,
have you disabled (unckeck) USB connection for ActiveSync/WMDC at PC?
do it now or USB port will not be available for mtty.
also please make sure that you installed XP sync driver under vista incase you're trying from vista.

follow the same -
1. unckeck USB connection for as/wmdc at pc
2. reset the device by pressing reset button
3. set bl mode (if not there already)
4. connect usb cable
5. start mtty ...

[god_love_power]

Hi Tomal, first I have to say: Thank you for your amazing roms. they are so fast, nice and stable. I'm one of the biiiig fan of your roms.

seconed: yes I was disabled the USB connection and also kill ir from task manager. but my Uni is still deeaaaaaaad

[tomal]

somehow I have a feeling that something is wrong with the usb port in device. may be connection is broken or something...

[god_love_power]

Hi everyone,
finally I had to send my Universal to doctor! , he says that I can load your device from SD card, and boot up it, (flashing card)
!!
I was wondered! what is flashing card! (load from SD card without any PC!)
Do any one have some information about this method!!!!

[enigma1nz]

If the device is not recognised by PC at the same time as Serial not changing to USB, I would think your USB port is no longer attached as it should and can cause the problem you described.

somehow I have a feeling that something is wrong with the usb port in device. may be connection is broken or something...

Yep, it does look like your device's USB being a culprit.

[enigma1nz]

Hi everyone,
finally I had to send my Universal to doctor! , he says that I can load your device from SD card, and boot up it, (flashing card)
!!
I was wondered! what is flashing card! (load from SD card without any PC!)
Do any one have some information about this method!!!!

I believe this is the thread you are looking for
http://forum.xda-developers.com/showthread.php?t=393370

[god_love_power]

Thanks a lot enigma1nz, i think that i need but can you (or any one) explane it, step by setp for me PLEASEE :D !:

1. Download the tool and unrar somewhere in your pc.
2. Decode the rom image (nk.nbf) using HTC64 tool and put it (nk.nba) under the "SD_Flash" directory.
3. Run the "SDFlash_G3.cmd" and follow instruction on the screen.

SD_Flash?????
Decode the rom image (nk.nbf)???????!!

[god_love_power]

:( this method is for 3G, my device is 4G

[yuvraj]

:( this method is for 3G, my device is 4G

my dear frnd few days back i was also suffered from that problem...
And problem was with mini usb in universal.
it was disconnected with there tracks from inside.
So just open ur g4 device and resold mini usb.

trust me this is the problem.

[god_love_power]

Thanks yuvraj, how can I do it? Is there any manual for it?
can you help:D

[orb3000]

You can find the manual in the Wiki, just do a search

[god_love_power]

I could'nt creat golden disk (flash from sd) cos that is for G3 devices, I just think that can we install another OS like linux on SD that is boot himself up?!
or i just have to change my universal mainboard!!!!?

[god_love_power]

Finally I beleve that my Uni is dead and I have to say goodbye to it :(
I'm going to buy HTC Advantage X7510, but there is one question:
Can I upgrade its WM 6.1 to 6.5 ?
:D

[orb3000]

You should ask that in the proper section, but I´m pretty sure it´s possible
Good luck in your new device and section

Farewell,