Unable to connect with activesync after misread instructions on flashing

[zipuz]

Hello guys!
I've got a bit of a problem here, because now my mobile refuses to connect with activesync and therefore making it impossible to flash it.
I read the readme in the cid bypass folder, and didn't quite understand it, but as keen as I was on getting a new rom I did it all wrong.
I actually copied the cid bypass folder to my sd-card and ran haret.exe from the phone. A friendly penguin appeared along with some green text, and it rebooted and went black. I waited for a while, but had no patience so I rebooted it again. But after this it has been impossible to connect it with activesync! I've tried hard reset and different computers but nothing works!
I'm hoping someone on this forum can help me!
best regards

[deuse]

Try this.
turn your phone off and press the camera button in then plug it into the USB port
you should get a multi color screen. If you do then you can flash.

But go here http://forum.xda-developers.com/showthread.php?t=330909

Go to where it says EDIT and follow what it says.
Oh and when a dos box opens up and ask you things just press the return key each time.

good luck

[zipuz]

hey man, I tried reflashing the original rom to my vox, with the manualstyle sd card flash. So now it's flashed with the original rom, but still activesync doesn't work! anybody have an idea on how to make this right?

[zipuz]

somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?

[deuse]

go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.

[deuse]

somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?

I am confused..is it working or not? one post you say it is but you cant sink..then you say its not.????

and dont use the flash off the mem stick..use windows..

[zipuz]

ok, sorry for making confusing posts! I'm just excited about getting it to work.
So here's the situation:
From stock phone used with exchange (turned off the exchange part before doing anything)

1. I ran haret.exe from my phone, and it rebooted into a "black state" after which I rebooted it again
2. I tried to connect it to my computer using activesync, to be able to flash, but it wouldn't connect. Activesync doesn't respond to my phone.
3. I flashed the shipped rom to my phone from my sd-card in good hope that it would reset the whole process, but it still won't connect to activesync.

So here's my problem; I want to flash a cooked rom to my phone, but I'm unable to connect it to my computer via activesync, what to do?

[zipuz]

go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.

tried with both ticked and unticked, still nothing :(

[deuse]

Turn off your phone then keep the camera button pressed in at the same time plug it into the usb port
your should show diff colors on the screen..if so follow what it says in this link.

http://forum.xda-developers.com/showthread.php?t=330909

and do it from the pc not your mobile...

[zipuz]

it's restored, but no activesync still :(

[deuse]

Is the cable you are using ok? or is it a new one you just got.

does windows see it when you plug it in? if so un-install active sync then reinstall it.

[ivanek666]

I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/

[deuse]

I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/

Have you been into settings and un-ticked the box in USB to PC?

Also if you are trying to sync to office you must create a new partnership
google is your best friend.

I have no problems with sync in XP/Vista?windows 7 and office 2007


I am using FMs 1.1 WM 1.1

[zipuz]

Is the cable you are using ok? or is it a new one you just got.

does windows see it when you plug it in? if so un-install active sync then reinstall it.

Windows notices my mobile (installs new drivers), but activesync doesn't register the device.

[yogusmilu]

Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.

[deuse]

Windows notices my mobile (installs new drivers), but activesync doesn't register the device.

Try this
open sync then at the top chose files then click on DELETE MOBILE DEVICE

see what happens..but post back if you fix it to help other people

[zipuz]

Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.

I failed to mention that I've tried the hard reset as well, no luck.
I thought about the same thing Deuse, but there's no mobile device registered, so I'm not able to delete it.

[parthabhatta]

It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.

[Addicted2xda]

Looks like your cable is faulty. Try activesync connection through bluetooth (for testing, ofcourse you cant flash from bt :D).

[zipuz]

It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
It's marked with an "!", will try it on my own pc next time I have it, worked there last time! if not, I'll have to live with:(

[zipuz]

tried to connect to my own computer, but it simply won't work, I must somehow have screwed up things when I ran haret directly from my phone or something. When plugged in to a linux it's registered as eth01, an ethernet connection.

[Mrkblo]

Man, if theres an exclamation on computer's hardware list, something is wrong with the installation. You should remove the device, on hardware list, then uninstall sync and reboot your pc. The try connecting your phone again.

[zipuz]

tried, won't work (in xp), will try with 7! hoping it'll work!

[zipuz]

works perfectly with 7! But after reading about flashing new roms to the phone, it seems like I need XP in order to do it?