[REF] The DEFINITIVE MTTY Thread!! - Diamond Edition

[eucher]

what do you think about this :
task 29 without drivers, without mtty :
http://forum.xda-developers.com/showthread.php?t=644781

is it possible to do this on the diamond like on the Leo ?

[CheopsChefren]

I am really unhappy. Whatever i try, i cant get mtty to work. I run W7-64 bits, i installed the drivers, and the watermark proggy. Restarted my pc, and all went well... But, as soon as i try to install the drivers for USB, it keeps coming up with non-signed drivers message, and the installation of the driver fails.
but then i can not get my phone connected to the mobile center anymore either, as the drivers are incorrect....

what should i do? i want to use mtty, but, whatever i try, no succes.... is there another way to use mtty?

[rodrigo.nery]

Good afternoon,
I tried to follow your tutorial but I forgot a very important step. I thought I had done the update of the Hard-SPL but I did not. Now my phone hangs on startup. It goes into bootloader mode but I can not install Hard-SPL or a new ROM.

I can revive the phone?

Thank you,
Sorry for the bad English

[lucose2001]

next time readddddd
if u forget is one big problem
read is important before do anything

if u remenber the original rom
u can try instal original rom
using ruu normally
without pproblem

what is ur original rom??
u remenber??

i am brazilian too

[tj924]

I am really unhappy. Whatever i try, i cant get mtty to work. I run W7-64 bits, i installed the drivers, and the watermark proggy. Restarted my pc, and all went well... But, as soon as i try to install the drivers for USB, it keeps coming up with non-signed drivers message, and the installation of the driver fails.
but then i can not get my phone connected to the mobile center anymore either, as the drivers are incorrect....

what should i do? i want to use mtty, but, whatever i try, no succes.... is there another way to use mtty?

If you have Windows 7 Professional or better & are therefore entitled to use WIndows XP mode, see my post (#744) about using MTTY & flashing from within the Virtual PC VM

[4D3]

If you have Windows 7 Professional or better & are therefore entitled to use WIndows XP mode, see my post (#744) about using MTTY & flashing from within the Virtual PC VM
or you could just follow the instructions. i have win 7 x64 and works fine for me

MG

[rodrigo.nery]

next time readddddd
if u forget is one big problem
read is important before do anything

if u remenber the original rom
u can try instal original rom
using ruu normally
without pproblem

what is ur original rom??
u remenber??

i am brazilian too


Help me!
Add rodrigo.nery@live.com

[lucose2001]

acept contact with my nick
i added u
adicionei vc
aceite meu nick

[lucose2001]

rodrigo.nery

adicone ai lucose2001@hotmail.com

add me in msn

[clevester]

i flash around 15 times....spl i all do alrdy....but no matter flash from internal or usb....status always stop at 23%...please help me....i doin tis 4 six hours adyy....non stop cosz i oly hav i hp.....i read all the post still can`t get understand....i tried in win 7 and xp pc.....all use the way post at first page....but still stop at 23%.....i alrdy hard reset.....please...please help me!!!!

[moSess]

Thank You for the excellent tutorial:)

[indigo12]

i need some help with the driver install from mtty
i make everything like in the 1 and 2th post but when i install the driver
i becomme a errorposting (code 10)

i tried this with win7 32 & 64 too
the Driver Signature Enforcement Overrider and Remove Watermark are installed @ the first like in the how to
so when i open the mtty i can´t see usb so help me please

[4D3]

i need some help with the driver install from mtty
i make everything like in the 1 and 2th post but when i install the driver
i becomme a errorposting (code 10)

i tried this with win7 32 & 64 too
the Driver Signature Enforcement Overrider and Remove Watermark are installed @ the first like in the how to
so when i open the mtty i can´t see usb so help me please
yeah, use the f8 method.

i stated in the fiorst post that the items you are using MAY work on your system, if they dont use the F8 method

MG

[clevester]

please help me....i doing this 2 days already....i read all the post still can`t get solve....i tried in win 7 32bit and xp pc.....
all use the way post at first page....
but still stop at 23% when i flash rom.....
i alrdy do hard reset...
try all spl...
tried mtty,task 29 or 28 55 aa
tried flash again radio....
but it alwayz show ERROR 226 FLASH ERROR
may diamond is DIAM100
what should i do???
i tried stock ROM alrdy....cant work...stop at 32%....please help me....

[kralous]

or you could just follow the instructions. i have win 7 x64 and works fine for me

MG

well i'm getting the same thing. tried many different methods of disabling driver signing, right now using F8 to disable, im running other unsigned drivers for other programs but I cannot install these drivers.

[openwicked]

TO THE OP ONLY:
before I even go deep, could you please clarify why one would need any 'Activesync' drivers for mtty? Why doesn't the win7 signed drivers work? and what is a 'remove watermark' tool and why the fancy name for a simple tool to remove a auto-driver installation which can be done with a built in tool called 'gpedit'?

This is utterly confusing to me.
I'm not voting for this not being non-sticky, but this definitely needs some serious editing in the first post itself.

[impact646]

I had some problems at first but now i got my rom working at last!
THANK YOU! THANK YOU! :)

[peeweegary]

So i tried the MTTY method to stop my phone from always hard resetting. While carrying out the procedures, i got different outputs in MTTY, but i still carried out the whole process. When i tried to flash from internal storage, my diamond says theres no image file. I know for a fact there is an image file as i've always been flashing from internal storage. So right now, i have no clue how to fix my diamond. Is it salvagable or is it dead?

[evalabonazza]

....format is immediatly ? or atemptin cmd ?:confused:

[4D3]

....format is immediatly ? or atemptin cmd ?:confused:
what exactly does this mean?

NOTE TO ALL:

This thread has been runing so long, and it fully works.

if people are having problems it is a problem with the thing operating your Computer, not this process.

Just incase you were wondering why i have not been answering posts.

a: if its been answered im not answering again
b: if it is a ridiculous question i am not answering
c: if it can be found in the thread i am not answering.

Personally i wish i had never opened this thread and kept this for myself. I have been running this for years and never had an issue, yet the longer this thread runs the more people have problems.

There seems to be a negative relationship between time/ability to read and follow instructions/logic.

(for those who cannot work that out it means the long this thread is open the lees people read)

I guess it goes to show what is happening to people!

[big_raji]

Personally i wish i had never opened this thread and kept this for myself. I have been running this for years and never had an issue, yet the longer this thread runs the more people have problems.


Sorry you feel that way. I definitely appreciate the work you've done in this thread. Although I didn't quite understand everything, I was able to muddle through it just fine. Thanks for everything!

I've had previous experiences flashing several WinMo phones with official and cooked ROMs in the past, but I have to tell you that the HTC Touch Diamond is by far the most complicated. I've never heard of Hard-SPLs or MTTYs before yesterday. The amount of information in the forums is massive, and so much of it is outdated. Searches turn up hundreds of results, and finding an answer is next to impossible. These sticky topics are a lifesaver.

As a n00b to the whole Diamond scene, I found a few of your instructions slightly cryptic. Where an experienced user would know exactly what you're talking about, I had to take a few guesses. Not being critical... I just think you have forgotten how a n00b thinks at first. ;)

In Post #2:
2: Connect Device to PC via Active Sync, Once Connected Uncheck USB Connections,DISCONNECT DEVICE then Reboot Computer


Although it was simple to uncheck USB connections on both the PC and the Phone, just wondering which one I was supposed to Uncheck USB connections on?

In Post #3 and #4:
Run mtty1.42.exe, You will se a box showing "COM1" from this list select "USB" - If USB isn't in the list, something has gone wrong in the "Driver Installation" Section of POST 1


Can you also just add "or you will have to reboot Windows using the F8 method to boot your PC without Digital Driver Signature Enforcement"?

I know that these are all answered answered in this thread, but those are just 2 of the times when I looked at the instructions and just went "huh?" ;)

Thanks again for the sticky post!

[openwicked]

TO THE OP ONLY:
before I even go deep, could you please clarify why one would need any 'Activesync' drivers for mtty? Why doesn't the win7 signed drivers work? and what is a 'remove watermark' tool and why the fancy name for a simple tool to remove a auto-driver installation which can be done with a built in tool called 'gpedit'?

This is utterly confusing to me.
I'm not voting for this not being non-sticky, but this definitely needs some serious editing in the first post itself.

Extreme apologies if I sound stupid here. I wanted this clarity before I even attempt to install drivers for 'activesync' or anything which requires windows signed drivers be overriden (which essentially means I have no clue what i'm doing which essentially puts me in a bad shape). Although, thanks for your efforts :)

[luckyvictor]

I am now having a serious problem, I have followed all the instructions above, and I think this is where it went wrong

Immediately DISCONNECT your device and hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) to Initiate ROM Flash

once I typed task 8, disconnect it, then press and hold vol down and back, the device just freezed at TOUCH DIAMOND, but not flashing the rom, and I have tried soft reset and hard reset (down + circle + reset, then up and up ) it, the problem is still there.

So how to fix it please?

I have done HardSPL btw, and the driver installed

[drjat]

I am now having a serious problem, I have followed all the instructions above, and I think this is where it went wrong

Immediately DISCONNECT your device and hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) to Initiate ROM Flash

once I typed task 8, disconnect it, then press and hold vol down and back, the device just freezed at TOUCH DIAMOND, but not flashing the rom, and I have tried soft reset and hard reset (down + circle + reset, then up and up ) it, the problem is still there.

So how to fix it please?

I have done HardSPL btw, and the driver installed

hit 'enter' after typing 'task 8' then disconnect and then........

[evalabonazza]

what exactly does this mean?

NOTE TO ALL:

This thread has been runing so long, and it fully works.

if people are having problems it is a problem with the thing operating your Computer, not this process.

Just incase you were wondering why i have not been answering posts.

a: if its been answered im not answering again
b: if it is a ridiculous question i am not answering
c: if it can be found in the thread i am not answering.

Personally i wish i had never opened this thread and kept this for myself. I have been running this for years and never had an issue, yet the longer this thread runs the more people have problems.

There seems to be a negative relationship between time/ability to read and follow instructions/logic.

(for those who cannot work that out it means the long this thread is open the lees people read)

I guess it goes to show what is happening to people!

:cool:
format and the 'immediate, or before disconnecting the diamond dall'usb must wait cmd appear?

thank for reply

[ArmaBene]

Hi luckyvictor,

I am now having a serious problem, I have followed all the instructions above, and I think this is where it went wrong

Immediately DISCONNECT your device and hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) to Initiate ROM Flash

once I typed task 8, disconnect it, then press and hold vol down and back, the device just freezed at TOUCH DIAMOND, but not flashing the rom, and I have tried soft reset and hard reset (down + circle + reset, then up and up ) it, the problem is still there.

So how to fix it please?

I have done HardSPL btw, and the driver installed

first of all don't worry ;-)

I had exactly the same issue this morning and I solved/unlocked the phone only by executing the ROM update from PC.
The HTC ROM update utility (I used the last official ITA ROM) states soon after execution that ActiveSync is required but I ignored all the messages that followed the execution because of Hard SPL already installed on my device... Obviously there wasn't any ActiveSync connection during the update but after the confirmations a progress bar appeared on the phone display... ;-)
So I suggest to set the phone in USB mode (as if You are going to use MTTY) and then to execute the ROM utility update in place of MTTY...
The update from PC requires obviously more time (many minutes) than the one spent by updating from internal storage.
Let us know if You find other troubles ;-)

[edmarfrazao]

I tried to use in the way said here but in windows 7 64 it did not give certain. but I found this link that it was
forum.xda-developers.com/showthread.php?t=416211
the solution of first functioned.

[ProCro]

Hey,
first I wanna say that this is great guide ;)

But i have little question :o

1. Will "task 29" delete my device memory+internal storage or just device memory?

edit: nevermind, i've figured it out :)

[nizoo91]

Good Stuff man, Thanks alot, ran into a few problems following the tutorial, but its only cuz am all new to the Diamond :P


Thx again and keep up the good work :)

[arvinghost]

hey guys what does this threat help with? what kind of problem you should be experiancing to use this threat?

and by the way i have the sprint Htc touch diamond

thanks

[Srem]

I am really unhappy. Whatever i try, i cant get mtty to work. I run W7-64 bits, i installed the drivers, and the watermark proggy. Restarted my pc, and all went well... But, as soon as i try to install the drivers for USB, it keeps coming up with non-signed drivers message, and the installation of the driver fails.
but then i can not get my phone connected to the mobile center anymore either, as the drivers are incorrect....

what should i do? i want to use mtty, but, whatever i try, no succes.... is there another way to use mtty?

i also have this problem. and i have no option to boot with F8. any other way of booting with signed driver check?

[balerio]

Sorry to keep adding pages to the thread but I really felt the need to thank you. Instructions are perfect and clear. You have helped me very much. Thanks

[cslzhou]

Follow this procedure for FLASHING YOUR ROM FROM INTERNAL STORAGE AFTER MTTY

Before you start grab: mtty1.42.zip (http://forum.xda-developers.com/attachment.php?attachmentid=208457&stc=1&d=1248437219)

AND ENSURE YOU HAVE HARD-SPL ON YOU DEVICE!!

Procedure:

1: Download a ROM of your Choice, RENAME the *.nbh for your ROM to: DIAMIMG.nbh

2: Copy DIAMIMG.nbh to the "Internal Storage" of your Device.

3: Bring device into bootloader (Reset + Hold Vol Down), this will show the Red, Blue, Green screen showing "Serial" - Connect device in bootloader mode to USB, the word "Serial" will change to "USB"

4: Run mtty1.42.exe, You will se a box showing "COM1" from this list select "USB" - If USB isn't in the list, something has gone wrong in the "Driver Installation" Section of POST 1

5: Leave default parameters, (8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No) and Click OK

6: Run following commands:


6a: Press enter first to get prompt (Will Show as EITHER USB> or CMD> - Personally Mine Showed CMD>)

---------------------
MTTY OUTPUT:
---------------------
CMD>
---------------------

6b: type "set 14 0" without the quotes to tell bootloader to boot the OS after reset:

---------------------
MTTY OUTPUT:
---------------------
CMD>set 14 0
HTCST ÚÈHTCEUSB>
---------------------

6c: type "task 29" to get your device formatted:

---------------------
MTTY OUTPUT:
---------------------
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 1337 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end

Cmd>
---------------------

6d: type "task 8" to ask your device reboot:

---------------------
MTTY OUTPUT:
---------------------
Cmd>task 8

Cmd>
---------------------

7: Immediately DISCONNECT your device and hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) to Initiate ROM Flash

8: After ROM flash Hard-reset (Pen Reset, then Press and Hold Vol Down and Circle) again, on completion "Press Vol Up To Boot" Is displayed, press "Vol Up" and allow the ROM to boot.

for some reason, i am just not getting the same output from Mitty...especially the last step...

Cmd>set 14 0
HTCST ÚÈÒHTCE
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 1670 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end

Cmd>task 8

[Alimentos]

Hi!
I followed the steps. But now, there's only "TOUCH DIAMOND" and i can't bring to bootloader mode. I hold vol-down and soft reset button, but nothing... What do i have to do???
Thanks

[cocule]

Hi!
I followed the steps. But now, there's only "TOUCH DIAMOND" and i can't bring to bootloader mode. I hold vol-down and soft reset button, but nothing... What do i have to do???
Thanks

Hi, try to hold "VOL down+pen reset", you will see the boot screen (red, green and blue). Then connect your phone to your pc and reboot your previous rom. It worked on my diamond.

[cocule]

Hi MysticGenius,
your guide is clear and simple but... on my diamond I had a problem. At the end of procedure (after task 8) the prompt doesn't show the line "CMD" another time but the phone reboot anyway. I tried to press vol down+back but nothing happened, on the phone screen there is only the HTC Diamond logo. I've been able to reflash my previous ROM but with the old problems... I'm using a Windows XP, copied DIAMIMG.nbh in internal storage ecc.. like your guide. Everything seems work fine until the last step. Can you help me?

P.S. Sorry for my english....:p

[Gustavmahler]

Hi MysticGenius,
your guide is clear and simple but... on my diamond I had a problem. At the end of procedure (after task 8) the prompt doesn't show the line "CMD" another time but the phone reboot anyway. I tried to press vol down+back but nothing happened, on the phone screen there is only the HTC Diamond logo. I've been able to reflash my previous ROM but with the old problems... I'm using a Windows XP, copied DIAMIMG.nbh in internal storage ecc.. like your guide. Everything seems work fine until the last step. Can you help me?

P.S. Sorry for my english....:p

Hey, if you search for this problem in this thread, you will find an answer for this question, as I did. I had exactly the same problem. The last CMD> didn't show up and nothing happened. This meant, that the old rom was already removed, but the new rom didn't start to flash from the internal memory. The solution for this problem is the following: Do the Mtty 'till the point where the last CMD> does not show up. Disconnect the USB connection. Then bring your device into bootloader (VolDown+Restart). Connect the device to the PC via USB. Start the usual CustumRUU.exe of your new ROM and flash the new ROM as usual. You will see, that there ist no old ROM, which means, that the old ROM was removed by MTTY. That's it.

[cocule]

Hey, if you search for this problem in this thread, you will find an answer for this question, as I did. I had exactly the same problem. The last CMD> didn't show up and nothing happened. This meant, that the old rom was already removed, but the new rom didn't start to flash from the internal memory. The solution for this problem is the following: Do the Mtty 'till the point where the last CMD> does not show up. Disconnect the USB connection. Then bring your device into bootloader (VolDown+Restart). Connect the device to the PC via USB. Start the usual CustumRUU.exe of your new ROM and flash the new ROM as usual. You will see, that there ist no old ROM, which means, that the old ROM was removed by MTTY. That's it.

Thanks very much for reply. In fact I made a flash via USB and all works correctly. I only would to be sure that MTTY has done his work!!!

[Pytte]

Thanks for this, I have put about 10 different roms on my Diamond but this last one failed, and kept hard resetting when i soft resetted, and other funky things like start menu buttons would dissapear, and contacts etc..

After this, everything works.

[nikfam]

[ S O L V E D ]
I think i am in serious trouble here...after flashing so many roms at my last try
after mtty (the whole format procedure) i forgot to flash the rom from the internal storage.I FORGOT TO FOLLOW THIS STEP AND INSTEAD I FOLLOWED THE LAST STEP FORMATTING ALSO THE INTERNAL STORAGE.so now there is NOTHING TO BOOT.after searching the net i found no answer.

i feel desperate..i hope there is a way somehow to flash a rom so PLEASE IF SOMEBODY KNOWS SOMETHING post a reply!!!!!!

[I THOUGHT THAT WHEN IN BOOTLOAD MENU WITHOUT FIRSTLY ESTABLISHING AN ACTIVE SYNC CONNECTION THERE IS NO WAY TO FLASH A ROM
apologize- it was the same reason that my eten phone ''passed away'' few years ago]

[YossyTob]

There is a need to "clean" the Radio region, from time to time?
I flushed many Radios, because the Radio drain the battery to quickly.
So I say, maybe if I clean the Radio it can help me.
Thank you very much

[capecol]

sorry but many of the ways you say this works, did not work for me... i have a Windows 7 Enterprise x64.

i dont have any problem with signed drivers, however i try the driver for win 7 x64 and this wizard said that i have the latest driver already installed, any way i did the enable safe test mode, remove watermark start using F8 a did not work.

i try hsp signed & unsigned with no luck...

sorry but this looks like has not been yet finished invented :)

[balauriciu]

Many thanks to all of you who worked for this MTTY guide. It helped me a lot and I made a complete read of this thread. Now flashing a ROM is piece of cake, no errors, smooth and simple. Once again thanks.
:)

[Magilvia]

I always flashed rom on my diamond without problem but this time I'm not able to run mtty. I followed this guide till when I run mtty: when I give the command "set 14 0" (or any other command) it gives me no response, just get the cmd> prompt. I supposed it was my seven x64 system but I try on xp and I get the same. Any idea ? Thanks!

[ciprigeorgiu]

what can i do if i missed the steps "6a" and "6b" in mtty?
my device just show the black screen and touch diamond

[Anakha56]

Please help! I did the format but the phone is not picking up my ROM on the internal storage! How do I get to install the ROM now? I have tried both ways from Internal Storage and Windows itself both are not working! Win7 64 keeps on saying it cant detect information about my phone. Can anyone help please?

*edit* Just looked at my rename file and I see a space where there shouldnt be hence the reason why its not picking up my nbh file on the storage memory...

*edit 2* Got it working it seems, needed to replace the x64 driver with the updated windows one. Fingers crossed...

[lutteur]

Hi,

During mtty flashing everything was as expected,
but I skipped hard reset in the last step. However,
new rom has started without problems. Does this matter???

Cheers

[ofear69]

Hi MysticGenius...
i wanted to say that this is a very detailed Tut..
but.. i think you should add this two things....
Warning to be ready to DISCONNECT after task 8


7: Immediately DISCONNECT your device and hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) to Initiate ROM Flash

And to add that user should click on Upgrade OS when the menu come up..


8: After ROM flash Hard-reset (Pen Reset, then Press and Hold Vol Down and Circle) again, on completion "Press Vol Up To Boot" Is displayed, press "Vol Up" and allow the ROM to boot.

add to press Vol Up when asking to restore to manifactor setting

and add that the new rom will be show after a few minute...
cos it's take time for first start

thanks mate!
sorry for my bad english!

[4D3]

Hi MysticGenius...
i wanted to say that this is a very detailed Tut..
but.. i think you should add this two things....
Warning to be ready to DISCONNECT after task 8



And to add that user should click on Upgrade OS when the menu come up..



add to press Vol Up when asking to restore to manifactor setting

and add that the new rom will be show after a few minute...
cos it's take time for first start

thanks mate!
sorry for my bad english!
Possibly you should look at when this is posted.

Im not editing anything, it works FOR YEARS with no edits!

it is a case of reading and following, not spoon feeding

MG

MG

[liehuo]

Hi, hope someone will be able to help me out here. I'm using windows 7 32bit. I tried searching for answers but non came up. I followed all the steps closely but i'm stuck with this problem:
http://i43.tinypic.com/tahnnr.jpg

[ofear69]

As you like Mystic..
i just wanted to help the one's who confuse...

Liehuo...
go to My Comuter and right click on it.
then click Manage
then click Device managment
and remove yout HTC USB Sync

And please do exect thing that Mystic said and do not skip a snigle one!

i have a win7 32bit and i did it today..

[anilthakurta]

i guess the problem is my bad english, but it is not clear for me, do i have to folow post 1 also with windows xp? i see that vista and windows 7 is named, but at post 4, there is also written that i need to follow post 1.

[ofear69]

Please read carefully anything that Mystic wrote...
as you can see..
there is two kind of ways to work with Mtty..
one is from Internal Storage and the other is from the main memory of the Diamond...
just do what you see in Post 1-3 and that will be enough...

[mowh]

hi i have completed the first steps of the Driver Installation

1: Run the Driver Signature Enforcement Overrider and select “ENABLE TEST MODE” and Press Next
2: There will be a warning to REBOOT, Press “OK”
3: Go Back to Driver Signature Enforcement Overrider Select “Exit” then Click “Next”
4: Run the “Remove Watermark V0.8” for you OS type (x64 or x84)
5: In the Command Window type “Y” and wait for the process to complete
6: Once complete REBOOT your system and begin the driver install

successful!!

Then i went on with these:

1: Download the relevant drivers for your system attached to this post: these work for both Vista and Win7, all you have to choose is x86 or x64

EDIT: It has been found that with different versions of Windows 7 x64 need different Active Sync Drivers... If you are using Windows x64 please try x64 AS Drivers Win 7 Tested & Working.zip FIRST!!!

2: Connect Device to PC via Active Sync, Once Connected Uncheck USB Connections,DISCONNECT DEVICE then Reboot Computer

3: Bring device into bootloader (Reset + Hold Vol Down), This will show the Red, Blue, Green screen showing "Serial" - Once Computer booted, connect device in bootloader mode to USB, the word "Serial" will change to "USB"
4.
5.
6.
.....

But just to 10.
If i want to install the Driver it says:
"windows encountered a problem installing the driver software for your device...windows cannot verify the digital signature for the drivers required for this device. ..."

And the first steps with the "Driver Signature Enforcement Overrider" were realy done successfully!
The Driverdate is the right: 01.09.2003
But in the Device-Manager my phone has a yellow sign!

I have WIn 7 x64 and i have tried it with both drivers but nothing helps!
Do u have any idea what the problem is?!

PS:
"2: Connect Device to PC via Active Sync, Once Connected Uncheck USB Connections,DISCONNECT DEVICE then Reboot Computer"
- what is ment with Uncheck? in win on the right bottom in the tray right klick -> disconnect HTC Device ?!?!
- waht ist ment with DISCONNECT DEVICE? Just put out the cable or shall i disable in the device-manager?!

[junalmeida]

if it is a GENUINE problem post it and I will help!

Hi! I hope you can help me. I have an HTC Diamond. After some minutes using it, it stops opening applications (any one, only already opened apps keep running), with the message: "cannot open critical component is either missing or cannot start because program memory is unavailable"

This happens with many roms. Also, mtty task29 shows no error.
Device hangs a lot with not reason.

[PDAras]

Ok, tried to use MTTY first time and kept giving me an error untill i figured out i had to chose com3.

Then it opened a blank page but pressing enter did not have any effect, nor typing any of the commands and then pressing enter.

I am running vista and already have connection drivers since I connect fine to Windows Mobile Device Center.

Am I doing something wrong?

Thanks!

[mowh]

So the Problem of mine above is solved!
But now i hand on this step:

"6d: type "task 8" to ask your device reboot:

---------------------
MTTY OUTPUT:
---------------------
Cmd>task 8

Cmd>
---------------------"

i type in task 8 but the MTTY doesnt answer the last "Cmd>". The device reboots ... i disconnect it and press VOL DOWN and the BACK ARROW above the "end-call-button" -> nothing happens. The device just show a blackscreen with white "Touch Diamond".
PLease help me!

[LeoBadhan]

Apologies if posting incorrectly, but one thing to note, if using Bitlocker please backup key first, and have it to hand as i needed to enter it... i got to the bit where i installed "removeWatermark" and carried out the reboot..after here:
1: Run the Driver Signature Enforcement Overrider and select “ENABLE TEST MODE” and Press Next
2: There will be a warning to REBOOT, Press “OK”
3: Go Back to Driver Signature Enforcement Overrider Select “Exit” then Click “Next”
4: Run the “Remove Watermark V0.8” for you OS type (x64 or x84)
5: In the Command Window type “Y” and wait for the process to complete
6: Once complete REBOOT your system and begin the driver install

[ciao99]

i followed the procedure for FLASHING YOUR ROM FROM INTERNAL STORAGE AFTER MTTY but the phone does not restart! there is only the black screen with "TOUCH diamond" and nothing happen!
please help me i'm desperate!:(

EDIT

fortunately after re-flashing the rom from pc it works...i was about to die xD

[roabras]

I really would like to thanks for this thread!
I was having a hard time with my Diamond hard reseting all the time, I followed the guide and did everything on the first try. Now my phone is perfectly!

The only thing that was a little different for me is that instead of 2003, my driver date showed 2004.

12: When you get back to "Driver Properties" check driver version. If the "Driver Date" has changed from 2nd step (2003 instead of 2007), the installation has been a success:

Thank you,

Abras

[yourmoms]

Today I was in the calendar app when the phone froze. No response from any button, screen stuck on. Phone got very very hot after about 10 mins. I pulled the battery. After power on, phone would get stuck at Touch Diamond Screen with red text.

I was actually running the latest Telus stock rom at the time this happened.

Tried Power-Vol Down-Action-Reset to access Hard Reset since I couldn't get into WinMo to Clear Storage. Hard Reset completes but still stuck at touch diamond screen.

Tried to flash to different rom, flashes ok in bootloader via usb but still sticks at touch diamond screen. Even flashing back to stock rom produces the same result.

I have followed this guide exactly with no problems after trying all of the above. I was able to complete all the tasks, formating the NAND, flashing, hard reset after the flash.

I am STILL stuck at the Touch Diamond screen...

[acoustiq]

Guys, I'm having a problem - I flashed a new ROM and everything works just fine, except that I can't copy anything to the Internal Storage. I get a stupid little error, no matter if I try to connect via Sync Center [Win7] or the HDD-mode.

Any ideas? Do you think running MTTY could help? Sort of a hassel since I'm new at this and I'm running Win7 x64 which seems a bit more restrictive about the driver...

[dlo2008]

I flashed about 50 times, not using mtty and without any trouble. I was always laughing when reading about mtty. Have experienced a bad flash, I was completely desperate, spent days without phone, and then suddenly I saw the light: mtty!
So thanks a lot, I don't understand what I've done exactly when following your instructions, but my phone is working again!

[suhas_sm]

Do I need to install active sync if have Windows Mobile Device Center ? I am very much confused. I am using windows 7. In device manager it shows as HTC DIAMOND under Portable devices with version 6.0.XXX something like that.

Thanks :)

[pedryto]

thanks for frezing ny htc diamond use this method and now the touch screen wont work tnkhx

[suhas_sm]

Nice tutorials. Used it to flash my diamond.
Thanks

[TheKiller_Dog]

When I try to update the driver im getting the message "This device cannot start. (Code 10).

Followed this steps 2 times before (while ago) succesfully. But now it just wont work?

Im using Windows 7 Enterprise x64.
Tried the F8 method with the x64 AS Drivers Win 7 Tested & Working.zip (59.7 KB, 10104 views) drivers.
With the overrider i dont even come this far.

Does anyone recognize this problem and is there a solution?

[blacktexx]

hey guys, i was doing the steps u said for my Compact IV HTC, which us basically a HTC diamond touch.
I have a problem to say. i followed all the steps and when i got to flash from internal storage, at the last step, after running mtty and TASK 8, disconnecting, the screen remains at loading, it's like this for 5 min now. did i do something wrong? can u help me? does it take long? its a white screen with "loading..." in blue. that's all. thx for your help

[gogu12002]

Hy,
I use MTTY program (for HTC Diamond) and after hard reset I see only black screen with logo "HTC Diamond” and nothing more. Of curse Active Sync. do not detect the phone and I afraid is definitive lost. Any suggestion will helpful.
PLS help!

[gogu12002]

thanks for frezing ny htc diamond use this method and now the touch screen wont work tnkhx

Same problem is happened with my Diamond. How you solved?PLS is urgent.Help!!
Regards

[mugglesquop]

Hy,
I use MTTY program (for HTC Diamond) and after hard reset I see only black screen with logo "HTC Diamond” and nothing more. Of curse Active Sync. do not detect the phone and I afraid is definitive lost. Any suggestion will helpful.
PLS help!

can you get into Bootloader? (volume down and reset) can then plug into USB and flash :)

Bootloader should be a screen with coloured bars and either "serial" or "USB" on the screen

[gogu12002]

can you get into Bootloader? (volume down and reset) can then plug into USB and flash :)

Bootloader should be a screen with coloured bars and either "serial" or "USB" on the screen
Theoretically you are right, but the time wen phone stay in boot loader screen is les 1 second, after appear one white screen whit 3 options:
press up volume for....................
press down volume for...............
press any key to return on boot menu
and appear the black screen with logo "htc diamond".
Thanks for reply.
Any adder’s idea is welcome!
I find one repair GSM shop and with 24EUR tomorow tray re-write the WM6.

[LapouX]

I post here because I have a problem to install the driver on a Win7 Pro 64bits.
I download the file : x64 AS Drivers Win 7 Tested & Working.zip
But when is use it to upgrade the drivers.
I have a error Code 52.

Can you help me?

Thanks

[gogu12002]

Be careful whit this program.For my : block my Diamond.I must pay for repair.

[pz.daniel]

[SOLVED]
Just tried your steps today 3 times again and now the update works...in total 10 times the same steps (yesterday 7 tries ;-) )...
Thanks for your great guide!


Hi guys,

I have the same problem as gogu12002.

After using the MTTY program (for HTC Diamond) with the guide at the beginning of this thread and after reset, the device is just booting into the black screen with the "HTC Diamond” logo and nothing more (the red data on the lower right is NOT shown).
As already described, ActiveSync does not connect to the phone any more -.-

In my case I can boot into the bootloader and I can do a hard reset. But reseting to manufacturing status doesn't change anything.

Some more Information:
MTTY was done by PC (with USB)
I CAN still flash the HSLP (tried OliNex and Bosna)
Also the "MTTY steps" can be done
Just flashing the ROM (original, cooked, whatever) is not possible (262 Connection Error).

Any suggestions? ;-)
Thanks for your time and help!
daniel



EDIT:
sry^^
I have windows xp
ActiveSync 4.5
While doing the MTTY stuff I have (as described in the tut) to deactivate sync with USB. Afterwards I tried both. To activate ActiveSync again, and to not activate again. Both doesn't work -.-

[woodyljb]

really a good job....thanks...

[Saggy]

Hi,

Please help as i'm unable to flash any ROM after doing the steps given in the post for MTTY

DIAM140 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32.

I tried flashing with Indian ROM also but it stucks on 0%....Please help:confused::confused::confused:

Solved:
HI All,

The issues has been solved...I downloaded the Indian ROM From HTC India...n Flashed it...guess what its working now... :)
Thanks for all the posts...

[gogu12002]

Be careful whit this program.For my : block my Diamond.I must pay for repair.

Sorry, shame for my. I use again MTTY program and everything is OK. After finish, go in boot loader and run "CustomRUU.exe" and start flashing ROM.
Exception: my Diamond after flashing remain in green screen with logo WM6, "tape on screen.......» and nothing moore.Stuk.Any advice is welcome.
Regards

[rufo_22]

I post here because I have a problem to install the driver on a Win7 Pro 64bits.
I download the file : x64 AS Drivers Win 7 Tested & Working.zip
But when is use it to upgrade the drivers.
I have a error Code 52.

Can you help me?

Thanks

I also have this problem when I try to change the driver on a Win 7 x64.

Any idea?

[majestyhao]

well done....

[Andre77ab]

I've done all command written in the 1st post (flashing from internal storage) but than after task 8 enter i disconnect the device (pressing back arrow and volume down) the device show: trigger movihan and than LOADING... but is freeze there :-( unable also to do hard reset (blocked on first sreen)

Help pleaseeeeeeee
Andrea

[locomotion]

please help me....i doing this 2 days already....i read all the post still can`t get solve....i tried in win 7 32bit and xp pc.....
all use the way post at first page....
but still stop at 23% when i flash rom.....
i alrdy do hard reset...
try all spl...
tried mtty,task 29 or 28 55 aa
tried flash again radio....
but it alwayz show ERROR 226 FLASH ERROR
may diamond is DIAM100
what should i do???
i tried stock ROM alrdy....cant work...stop at 32%....please help me....

to all diamond guru's..
somebody please guide us.. im having problem same with this guy.. i searching every thread and post, but no go.. only me and him having similar issue..
its been a a week i try find the solution.. my device stuck in bootloader mode forever!! its say upgrade rom code error.. but i can flash radio with no problem.. i have spl-1.40.Olinex.. is it possible flash other hspl via bootloader..? is my internal flash memory corrupted or defect?

[tompok82]

to all diamond guru's..
somebody please guide us.. im having problem same with this guy.. i searching every thread and post, but no go.. only me and him having similar issue..
its been a a week i try find the solution.. my device stuck in bootloader mode forever!! its say upgrade rom code error.. but i can flash radio with no problem.. i have spl-1.40.Olinex.. is it possible flash other hspl via bootloader..? is my internal flash memory corrupted or defect? That's because you're using the same unit as clevesterz.
You bought that unit from him.

[Johev]

Hi people, I have a question, and I can not find the answer to it. I come from the X1 part of this great forum, and I would like to ask if I can use the program task29, that I use for the X1 for the HTC Diamond.

It is much easier, as all we need to do is sync the device, execute tast29.exe and follow the instructions on the PC.

When the device reboots, it is completelly formated.

Is there anything like this for HTC Diamond, or can I use X1 on this phone?

Thank you all in advance for all your help.

[joebi]

I've read through a lot of the thread but can't seem to find a definitive solution to the issue of the drivers still not installing due to unsigned drivers? Using Win7 x64 and booted using the relevant boot mode from F8 menu. Drivers still wouldn't install at boot up so obviously got no response from mtty when entering commands. The USB option still appeared though.

I've flashed without mtty and am not getting any soft/hard resets. However I'm still keen to get mtty working in the hope that it might make the ROM run smoother?

[bruno r]

wy always keep having this message

"XXXPort can not open"

[decent_devil]

Dear all,
Need help as I am facing problem after reflush my phone today.
I have previous tried mtty my phone without problem.

1) My diamond behave abnormally. Upon restart, I failed to key in the password and after 3 attempts ( I am sure is correct password), my phone was flush :(
2) I tried to load my diamond OS back to normal (From internal storage diamimg.nbh) but still facing problem
3) I then use mtty, follow steps in thread 1, restart the phone.
4) Tried to flush the phone from internal storage but failed.
5) I tried flushing my phone with the supplied CustomRUU.exe, Rom flush successfully.
6) The problem now is, I noticed my internal 4GB storage is gone. I tried reflush but the result remains the same.

Is there any steps which I missed causing me to lost my 4GB internal storage?
I tried go to setting\systems\memory, it states : Total storage card memory : Not installed

[sdbhavsar]

my htc diamond has crashed down......the screen does not display other than d start screen TOUCH DIAMOND........pls help.....

[wpaap]

Originally Posted by viperbjk

One can also use PSAS (http :// revskills.de)
=> works for all Windows Versions without installing old drivers and Trial is for free (no more time limit as in QMAT).

How to use :

Windows XP :
1. Start PSAS and go to "Hardware Forensics->Use Mobile Ports".
2. Select appropriate com port (\\.\WCEUSBSH001 should be fine for most) in com config tab.
3. Select "Modem Port (Async)" Tab.
4. Press "Start Serial(XP)"
5. Enter any command you wish into edit box at the left and press Enter button or click onto "Send ASCII via Serial".

Windows Vista / 7 :
1. Open up Windows Mobile Device Center, go to Preferences and uncheck "Use usb connections" (Do not close device center!)
2. Start PSAS and go to "Hardware Forensics->Use Mobile Ports".
3. Select "Modem Port (Async)" Tab.
4. Press "Start USB(Vista)"
5. Enter any command you wish into edit box at the left and press Enter button or click onto "Send ASCII via USB".

Install rom via USB:
1. Type: task 29
2. Ignore fail messages
3. Type: task 8
4. Start CustomRUU.exe with your rom
5. Have fun

[tendzin]

Hi,

Using MTTY, is it possible to have the list of the known tasks?

task 8 : reboot
task 29: format
...?

Thx

[Djablos]

Hi there. I am from this thread (http://forum.xda-developers.com/showthread.php?p=8036954#post8036954) right here. To keep the description short: when i power on my Touch Pro 2 the bootloader screen always appears besides i turn it on with the earphones plugged it. "set 14 0" doesn't help. Can anyone help me to solve this problem?

[tuckerphill]

Would just like to thank everyone for submitting this information - it helped me personally very much....thanks again!

[ashtuladhar]

good tutorial

[dioadi]

on Flashing from Internal Storage, step no 7 ;

7: Immediately DISCONNECT your device and hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) to Initiate ROM Flash

DISCONNECT here, is it just by unplug the usb cable immediately, or firstly do the "Safely Remove Device" from the icon on taskbar, like i used to do when i want to remove my usb flashdisk?

thanks for the answer :)

[meirionwyllt]

Hi there,

I've successfully used MTTY to flash new ROMs on my diamond many times, but this time I've done a mistake. I did a typing error on the name of the image file. I called it 'diaming.nbh' instead of 'diamimg.nbh'.

Without realising my mistake I copied it over to the insternal storage, went into the bootloader and ran through the MTTY commands:

set 14 0
task 29
task 8

But of course, when it comes back round into the bootloader (pressing VolDown and <- buttons), it says "No image file!". I'm a bit stuck here now, because I can't reload the previous ROM because the disk has been formatted by MTTY, and I can't rename the file on my internal storage to 'diamimg.nbh' because I need an OS to do that.

Now, is there ANYTHING I can do to get around this? Is there a way of having MTTY tell the phone to look for an image file called 'diaming.nbh' instead of 'diamimg.nbh'?

I'm desperate.

Thanks.

[dioadi]

Hi there,

I've successfully used MTTY to flash new ROMs on my diamond many times, but this time I've done a mistake. I did a typing error on the name of the image file. I called it 'diaming.nbh' instead of 'diamimg.nbh'.

Without realising my mistake I copied it over to the insternal storage, went into the bootloader and ran through the MTTY commands:

set 14 0
task 29
task 8

But of course, when it comes back round into the bootloader (pressing VolDown and <- buttons), it says "No image file!". I'm a bit stuck here now, because I can't reload the previous ROM because the disk has been formatted by MTTY, and I can't rename the file on my internal storage to 'diamimg.nbh' because I need an OS to do that.

Now, is there ANYTHING I can do to get around this? Is there a way of having MTTY tell the phone to look for an image file called 'diaming.nbh' instead of 'diamimg.nbh'?

I'm desperate.

Thanks.

as far as i know, if that's the case, use the RUU, my friend :)
use the custom RUU.

[meirionwyllt]

as far as i know, if that's the case, use the RUU, my friend :)
use the custom RUU.

Hi, thanks for your reply. I've tried the RUU, but it says that it cannot connect to the phone. Doesn't RUU need an ActiveSync connection for it to work?

I don't think it's possible to use RUU from the bootloader, unless someone known any different.

Any more ideas?

[dioadi]

Hi, thanks for your reply. I've tried the RUU, but it says that it cannot connect to the phone. Doesn't RUU need an ActiveSync connection for it to work?

I don't think it's possible to use RUU from the bootloader, unless someone known any different.

Any more ideas?

yes, it have to be connected with activesync,
and have you checked "Allow USB Connection" on activesync setting?
it was disable before.

[kotmann]

yes, it have to be connected with activesync,
and have you checked "Allow USB Connection" on activesync setting?
it was disable before.

no, an activesync connection does not have to be established. load the bootmanager (vol up key+ reset key), connect the phone to the pc via usb, then start RUU.

[meirionwyllt]

no, an activesync connection does not have to be established. load the bootmanager (vol up key+ reset key), connect the phone to the pc via usb, then start RUU.

Thanks! It worked!!

[oeiemans]

As u guys have helped me so often here's my two cents:

When you are asked for a command in MTTY don't copy paste (for example: Set 14 0). This will not always work and you will see only a CMD> as a response.

[jaguar76]

I cannnot rise my htc diamond, when i turn on the phone, the only things that shows is the splash screen..
I have the hard spl 1.93.0000 that showns on tricolor screen but when i try to flash with any rom the progess bar freeze to 0% always :(

When i run the mtty shows the following :

CMD
Command error !!!

Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 242 FAIL !!!
ERASE block 1026 FAIL !!!
ERASE block 1670 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end

[LaMpiR]

I have one problem on my laptop. It doesn't change the driver date to 2003 and it's saying that it device cannot start code 10.
And when I hook it up first time, it works, install driver but when I got o usb connections, there is no htc?
Also I have done Driver Signature Enforcement Overrider and Remove Watermark V0.8 and also tried with disable driver bla bla before win booting. I have windows 7 32bit.

[gunar100]

Welcome Mysticgenius!
(Sorry my Englis!)
Do you have a problem you've never seen! The HSPL-1.93_Olinex, MTTY program was run, but neither IS nor from a PC is not working well with flash.
I only know where you updated the. NBH file is small (rom and radio rom) if large in size as more than 74-76MB depending on the size of x% then stops at the flash! Also the original rom is not updated because of the large! Please help if you have an idea!
Thanks!

[DjMaryuslive]

I tried to download the program on many sites " Driver Signature Enforcement Overrider 1.3b " , but my Avira Antivirus suggest that it is a virus :(
Or maybe is not even a virus and my antivirus sees the program a virus ???

A virus or unwanted program was found ! ( i use Avira Antivirus )

C:\Users\AppData\Local\Mozilla\Firefox\Profiles\if 0ghtnr.default\Cache\EFE6B1A6d01

Contains recognition pattern of the SPR/Tool.Driverunsign program

Please give me a website with the program " Driver Signature Enforcement Overrider 1.3b " is not a virus.
sorry for my poor English

[DjMaryuslive]

Before i flash the rom " RaLphusion Rom.GT 1K " I had total 192 Ram with Original Rom, and after I flash " Rom.GT RaLphusion 1K " I have only 128 ram.
I tried to several Roms but nothing, displays total 128 ram of 192 ram.
Can someone help me somehow I do 192 Ram ? is there a solution, or program ?
Sorry for my English.

[pashadiablo]

Hi guys, I have a problem.

I tried to flash the rom of my htc diamond. I copied the .nbh file in the internal memory, then I used mtty. I followed all the steps written on first page. All seems going fine. But at the end, after task 8, my device is trying to restart, but on the diplay remains the writing : "Touch DIAMOND" and the device can't reboot. I tried to do an hard reset but the problem persists.
Then I have made a mistake: I have reset Movinand.
What can I do to solve my problem?
Thank you for answering

Andrea

P.S. Sorry for my bad english

[DjMaryuslive]

Hi guys, I have a problem.

I tried to flash the rom of my htc diamond. I copied the .nbh file in the internal memory, then I used mtty. I followed all the steps written on first page. All seems going fine. But at the end, after task 8, my device is trying to restart, but on the diplay remains the writing : "Touch DIAMOND" and the device can't reboot. I tried to do an hard reset but the problem persists.
Then I have made a mistake: I have reset Movinand.
What can I do to solve my problem?
Thank you for answering

Andrea

P.S. Sorry for my bad english

contact me , Andrea ( djmaryuslive@yahoo.com )

[pashadiablo]

Hey guys, I solved the problem using RUU. I discovered that RUU doesn't need "Windows Mobile Device center" connection. I had turned on my device in boot loader mode, than I link it with my PC. I launched RUU and the flash was done.

Thanks to all, and expecially to DjMaryuslive for his availability.

Have a good day

Andrea

[arildas]

Thank you for your Tread

[ks20@LCNet]

hi guys,
i got serious problem.
my problems as below:=
I follow POST#3 Copy DIAMIMG.nbh to the "Internal Storage" but no img found. after that ..
I try POST#4 flash from USB..........everything fine. but i flash using customRUU still not respone at 0% at grey screen.


Please help......

10q

[ks20@LCNet]

hi guys,
i got serious problem.
my problems as below:=
I follow POST#3 Copy DIAMIMG.nbh to the "Internal Storage" but no img found. after that ..
I try POST#4 flash from USB..........everything fine. but i flash using customRUU still not respone at 0% at grey screen.


Please help......

10q

Problem solved by flash "RUU_Diamond_HTC_Asia_WWE _1.93.707.1"

[louien]

guys i have a problem i forgot to rename the file into diamimg.nbh. so i cannot install the new custom rom. how can i rename it? the file is already copied to internal drive of diamond... guys please help me...

[ayyu3m]

simple. jus flash from pc if ur in bootloader mode. i hope u have the .nbh file on the pc

[febo87]

Hi all. I have a real serious problem... I've done all is written in your posts, but when I give the comand "task 8" and disconnect the phone, after I hold vol down and the back-arrow, the device shows me a strange message abuot usb trigger, something like "retry connect USB"... now, my diamond doesn't not work anymore and I'm feeling so stupid because I think I've made a mistake in following your guide. What can I do? Can I re-install a rom even if there is no OS on my device? Please, give me an answer. Sorry for my bad english. Thank you so much.

[febo87]

Ok, I have re-installed windows mobile on my diamond. I cannot understand what's the matter with this guide. When I put the cmd "set 14 0", it shows me a message different from the yours one. Maybe the problem is this. How can I do? I just want to try a cooked rom, but it seems realle impossible! Installing linux was actually easier . Please tell me what's wrong... thank you!

[febo87]

Finally I've found the solution! I'm sorry for wasting your time, but I want to thank you for all. Happy new year!

[4D3]

Finally I've found the solution! I'm sorry for wasting your time, but I want to thank you for all. Happy new year!

Glad you got it sorted, I dont really look at this thread any more as the instructions are prefect.

MG

[george_f1]

Cmd>info 7

HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Panther, Bootloader Version : 0.61.0000
Built at: Feb 25 2009 19:11:29
Copyright (c) 1998-2007 High Tech Computer Corporation

Board ID=0x2
CPLD ID=0x2
gCurrentPanel=0x4


Cmd>info 8

--- 2K bytes sector version ---

DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40

Checking block information

BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 495 (0x1EF) is bad block
OS NOT FOUND !!!


Cmd>task 28 55aa
Format start
Fill RSVD information for block 288 to 309
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format end

Cmd>task 29 55aa
Format BINFS start
Fill RSVD information for block 288 to 309
CE start sector=0x8C00C280, total sector of CE and TFAT=0x8C00C280
CE start start block=309, total block=1739
ERASE block 495 FAIL !!!
Write 0xFF start page=0x4D40, total page=0x1B2C0
Format BINFS end

[illi]

Glad you got it sorted, I dont really look at this thread any more as the instructions are prefect.

MG
@MysticGenius
Your tutorial helped saved my Topaz. The Service Center refused to flashed official ROM since my device is HardSPL'ed.

Thank you:cool:

PS Maybe you should add to the first post that this is for Topaz too.

[adempozhari]

wtf.. i spent 1 hour to have "mobile device" shown on device manager..

edit : i had to star windows 7 with f8..ect ect and didnt had code 10 error.

very good tutorial... just thanked you

[RD274]

6: Run following commands:

6b: type "set 14 0" without the quotes to tell bootloader to boot the OS after reset:


A little help guys ...

I've done everything right up to this step. When I type "set 14 0" and press enter, nothing happens. I just get a "CMD>" like as if nothing happened. The same goes for typing the remaining stuff... nothing happens.

HTC Diamond GSM
Windows XP x86

[trveller72]

Finally I've found the solution! I'm sorry for wasting your time, but I want to thank you for all. Happy new year!

how did you solve the problem?
i have the same message and i can't flash any other rom

[anilthakurta]

I used the mtty methods multiple times (and hard spl). But today it goes wrong, because after the reboot of mij tel, its keep getting stuck on "loading...".

Can someone help?

When i type set 14 0, i get: HTCST ÚÈÒHTCE

[Younio]

A little help guys ...

I've done everything right up to this step. When I type "set 14 0" and press enter, nothing happens. I just get a "CMD>" like as if nothing happened. The same goes for typing the remaining stuff... nothing happens.

HTC Diamond GSM
Windows XP x86

Hi, Just today I have the same problem,

After typing any command from this thread, nothing happens, I just get the same CMD> again. But if I type random stuff I get "Command error !!!" that means that it recognizes the commands, but doesn't execute them.

I'm using Windows Vista x86 and the same phone

Waiting for the rescue :confused: ;)

[wessozi]

There was nothing wrong with my driver installation (i had successful reports from the c omputer during installation), what simply happened was that the computer didnt recognise any USB devices connected when it rebooted. Removed and then re-inserted the USB cable, restarted the program and then the USB setting was visible. Might want to edit that incase of people blaming bad downloads or bad driver files on the servers.

THANK YOU! Lots of loove!

Had a error code 10 as well, which someone suggested to solve in the same way! Jus replug the USB! Also had a problem with the unsigned driver bleh which was solved by F8 booting, couldnt find that very clearly in the instructions tho?

[wessozi]

THANK YOU dude! Ok I had alot of problems during this, but the answers were all in the posts, spread!.. still! Thanx alot! And to everybody else who had problems and got answers i could leech on!

[wessozi]

I used the mtty methods multiple times (and hard spl). But today it goes wrong, because after the reboot of mij tel, its keep getting stuck on "loading...".

Can someone help?

When i type set 14 0, i get: HTCST ÚÈÒHTCE

Had the same "problem" apparently it doesnt mean anything! Just continue from there! ... at least I did and it worked just fine!

[Younio]

Hi, Just today I have the same problem,

After typing any command from this thread, nothing happens, I just get the same CMD> again. But if I type random stuff I get "Command error !!!" that means that it recognizes the commands, but doesn't execute them.

I'm using Windows Vista x86 and the same phone

Waiting for the rescue :confused: ;)

Hi again if anyone can read me, please help. Could it be some kind of hspl issue or it is computer's fault. Could anyone advise me. I searched numerous forums and no one else seems to be having this kind of problem. Thank you in advance :)

[Christoph21x]

Hi All!
Maybe someone can help me. I'm not a newbee to MTTY, am running it on two machines since years now. I had initially problems installing it, by this time, the F8-hint was not in the how-to...
The two machines, that run MTTY well, are Win7-64 machines.

Now I'm trying since hours to get it run on my Win7-x86 Netbook.
I did all the steps (with and w/o disabling signature thing in F8) - I can't manage to install the x86 (YES, I picked the rights ones out of the first posts) driver.

It says "Failure during installation, Platform not suported" (something like that, I have a swiss-german Win7 version)
Afterwards the driver is either NOT at all installed OR once it showed a different driver date, but it was 2004, not 2003 (as it is under x64). It seems to me to be a signed driver for x86, right?
I also tried to delete the 2007 driver completely and tried it without internet connection to avoid automatic loading from there - same problem "platform not supported")
NOW, I can't get ANY connection anymore, also not with other running WM6.5 devices...

Anyone any idea? Or - better - someone had the same situation and solved it?

Thank you very much in advance and with kind regards from Switzerland

Christoph

PS: Thanks for this thread!! Would it be good to have a kind of "trouble shooting & their solutions collection" in one of the first posts?

***** EDIT (same day) *****
After today's MS Patch Day there are differences.

Above situation happened AFTER SP1 installation. As I see now, 2 weeks later, that the behavior strongly changed, maybe there was a bug there?
BUT... still the same problem, but differences:

1. In Device Manager, it is not anymore called "mobile devices", but "portable devices"
2. Trying to follow the steps of driver installation of x86 drivers as stated in the first posts, I get the CLEAR message, that the drivers downloaded as x86 drivers are NOT 32-bit drivers.
Can anyone send me his drivers that actually RUM after SP1 installation (means "that STILL run")?

Greetz from Switzerland

[Hakim Rahman]

Hi All!
Maybe someone can help me. I'm not a newbee to MTTY, am running it on two machines. I had problems there installing it, by this time, the F8-hint was not in the how-to...
The two machines, that run MTTY well, are Win7-64 machines.

Now I'm trying snce hours to get it run on my Win7-x86 Netbook.
I did all the steps (with and w/o disabling signature thing in F8) - I can't manage to install the x86 (YES, I picked the rights ones out of the first posts) driver.

It says "Failure during installation, Platform not suported" (something like that, I have a swiss-german Win7 version)
Afterwards the driver is either NOT at all installed OR it also once shwed a different driver date but it's 2004, not 2003 (as it is under x64). It seems to me to be a signed driver for x86, right?
I also tried to delete the driver completely and tried it without internet connection to avoid automatic loading from there - same problem "platform not supported)
NOW, I can't get ANY connection anymore, also not with other running WM6.5 devices...

Anyone any idea? Or - better - someone had the same situation and solved it?

Thank you very much in advance and with kind regards from Switzerland

Christoph

PS: Thanks for this thread!! Would it be good to have a kind of "trouble shooting & their solutions collection" in one of the first posts?


what you ever tried Definitive MTTY (http://forum.xda-developers.com/showthread.php?t=540290) ?? :confused:
hopefully it helps you

[Christoph21x]

what you ever tried Definitive MTTY (http://forum.xda-developers.com/showthread.php?t=540290) ?? :confused:
hopefully it helps you

Funny...
[comment deleted by myself]

[Younio]

A little help guys ...

I've done everything right up to this step. When I type "set 14 0" and press enter, nothing happens. I just get a "CMD>" like as if nothing happened. The same goes for typing the remaining stuff... nothing happens.

HTC Diamond GSM
Windows XP x86

I finally found out what was happening. It seems that you can't copy the command from the forum. you need to write it down yourself. (so silly :D ) Otherwise it wont work. And I run the program as administrator. And it finally worked. :) Hope it helps someone

[pazirez]

Hi Guys!

I have a big problem ... i had Hard-SPL-Diamond-OliNex 1.3 ... NOT Unsigned :S
And tried to flash Energy ROM with MTTY... but now ... i had stuck in a "Loading" Screen

Nothing happening ...

after task 8 and disconnecting the phone was easy ... after nothing happening :/

Any idea...

after removed the battery .. the original WM 6.1 isn't starting ... just the HTC Diamond picture

thx a lot

and sry for my english

p.s. Bootloader still working

[drjat]

Hi Guys!

I have a big problem ... i had Hard-SPL-Diamond-OliNex 1.3 ... NOT Unsigned :S
And tried to flash Energy ROM with MTTY... but now ... i had stuck in a "Loading" Screen

Nothing happening ...

after task 8 and disconnecting the phone was easy ... after nothing happening :/

Any idea...

after removed the battery .. the original WM 6.1 isn't starting ... just the HTC Diamond picture

thx a lot

and sry for my english

p.s. Bootloader still working

This is on assumption that you were trying to flash from internal storage:
perss reset with stylus with "Vol Down and Back" buttons pressed and follow instructions.
This would not have happend if you followed the instructions well but anyway.......nothing to worry........just do as above mentioned and let me know how it goes.

[pazirez]

thx for the quick reply ... but another problem ... when i'm pressing volume down+back+reset with stylus .. it notthing happens ... is that possible the little reset button is dead? :/

reset button do nothing .. with any button combination
power + volume down is working
volume down + back working too

any other idea?

bootloader still working .. tried to flash rom via USB .. after mtty ... same thing .. it restarts ... and stuck at 0%

is hardspl version wrong? .. or that it isn't unsigned?
thx

[pazirez]

I'm a complet idiot :D ... a noOb :D .... which button i'd pressed with the stylus wasn't "reset" there was anything else, next to the usb connection pin ...
the reset button is in the corner :D

anyway .. i think my problem solved ... i'd flashed Unsigned hardspl 1.4 from hardspl 1.3 ... and now ... the rom flashing is working ... not stuck at 0%

i hope it will be good ...
thx a lot, and the quick reply :)

[rzvcool003]

hi...i have a problem...tried to find the answer in the thread but did not find it...i want to install a radio version on my hd2 but i cant....i get an error at 100% who says that it is not compatible with my phone...i get that problem with every version of the radio...so i wanna format the phone...tried ur method...but when i run task 29 or task 28 or task 28 55aa i get this:Cmd>set 14 0
crc=0xD2C8DA7F.

HTCST ÚÈÒHTCE
Cmd>task 28 55aa
Format start
Fill RSVD information for block 497 to 530
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format end

Cmd>task 29
Format BINFS start
Fill RSVD information for block 497 to 530
CE start start block=530, total block=3566
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format BINFS end

Cmd>


so i do not now what to do...pls help...tnx..

[helicopter88]

hi...i have a problem...tried to find the answer in the thread but did not find it...i want to install a radio version on my hd2 but i cant....i get an error at 100% who says that it is not compatible with my phone...i get that problem with every version of the radio...so i wanna format the phone...tried ur method...but when i run task 29 or task 28 or task 28 55aa i get this:Cmd>set 14 0
crc=0xD2C8DA7F.

HTCST ÚÈÒHTCE
Cmd>task 28 55aa
Format start
Fill RSVD information for block 497 to 530
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format end

Cmd>task 29
Format BINFS start
Fill RSVD information for block 497 to 530
CE start start block=530, total block=3566
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format BINFS end

Cmd>


so i do not now what to do...pls help...tnx..

Why you are posting in Diamond subforum questions about HD2?

[krishnasty]

SORRY GUYS...ITS WORKING PROPERLY..WAS OVER LOOKING A SIMPLE STEP..
THANK U GUYS..


I was trying to install custom ROM on my Diamond and now, all i am seeing the standard Touch Diamond black screen and nothing beyond that.

Here are the steps which i followed:

1. Downloaded HARD SPL from http://forum.xda-developers.com/showthread.php?t=416211 and ran ROMUpdateUtility.exe on the phone. It was successfull

2. Then downloaded custom Radio 1.09.25.23 and installed on the phone jst as the previous step. Even that was successful.

3. Downloaded MTTY from http://forum.xda-developers.com/showthread.php?t=540290 and tried flashing from USB (post #4).

3.1 in the bootloader, selected USB and left every other configuration like original.
3.2 in the cmd :

--------------------------
Cmd>set 14 0
HTCST ÚÈÒHTCE
--------------------------

then,
--------------------------
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 75 FAIL !!!
ERASE block 123 FAIL !!!
ERASE block 138 FAIL !!!
ERASE block 1075 FAIL !!!
ERASE block 1667 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
------------------------------

then,
---------------------
Cmd>task 8
Cmd>
---------------------
disconencted my device and held the vol down key and was navigated to the bootloader screen with USB connection.


4. dowloaded 'Energy' ROM from http://forum.xda-developers.com/showthread.php?t=517300
and then tried running it.. but then the custom RUU says that cant connect.

Now i am really worried..did i brick my cell? is there any way to come out of this??

Loads of thanks in advance..

[teddyorsetto]

thanks so much!!

[aftashokz]

works great for me using xp virtual pc on windows 7 ultimate good work

[4D3]

works great for me using xp virtual pc on windows 7 ultimate good work

WOW!!! There are still people using the Diamond!!


Thanks for the comments!!