Get stuck in Bootloader

[Miep Miep Zoeffff]

Hi !

My P4350 got stuck in the bootloader when I stied to flash a new ROM
Active sync doesn't recognize the P4350 anymore....
IPL 5.04.0002
SPL 4.10.0000

What should I do now ????

[Zaknafein21]

search for bootloader... there are so much threads with the same question

[Digital Outcast]

Did it fail during the flashing process? Do you see an error message on the bootloader screen? ActiveSync won't recognize the device unless it is booted up in Windows Mobile. If you can still get into the bootloader reflash the ROM from there. You don't have to flash ROM's connected via ActiveSync; you can do it from the bootloader as well.

[Miep Miep Zoeffff]

It did fail during an flash !!

The only thing on the tri colour screen: is: IPL 5.04.0002 and SPL 4.10.0000

When I try to flash a new rom it gives errors, it starts for 2 seconds and than it stops with an error. (on several occasions different errors ==> one error at the time).

[Digital Outcast]

Post some of the error codes you get. Have you tried flashing a different ROM? You may need need to use MTTY if you get a ROM upgrade code message in the bootloader itself.

[Miep Miep Zoeffff]

Ehhhhhhh what is: MTTY if you get a ROM upgrade code message in the bootloader itself.

I have NO idea what you mean.

I had before an TyTN and that was no problem ever (until it died..)

[Diagrax]

Ehhhhhhh what is: MTTY if you get a ROM upgrade code message in the bootloader itself.

I have NO idea what you mean.

I had before an TyTN and that was no problem ever (until it died..)

Is ur device CID unlocked(HardSPLed)?

[Digital Outcast]

It did fail during an flash !!

The only thing on the tri colour screen: is: IPL 5.04.0002 and SPL 4.10.0000

...

I'm a retard. You don't have HSPL flashed to your device. This is why it keeps failing when you try to flash a ROM. The HTC SPL on your device is blocking you from flashing unsigned (custom) or CID-mismatching ROM's to your device. All you should need to do is flash HSPL and then your custom ROM. Read the Wiki (http://wiki.xda-developers.com/index.php?pagename=HTC_Herald) for this device if you need more information.

[Miep Miep Zoeffff]

My phone was provided by Vodafone.
I have now Telfort.

I flashed Vodafone to Canonyang.
Then I tried to put the Dutch back on it and then it got stuck in the Bootloader.

Wasn't it hard SPL than??

[Miep Miep Zoeffff]

I'm a retard. You don't have HSPL flashed to your device. This is why it keeps failing when you try to flash a ROM. The HTC SPL on your device is blocking you from flashing unsigned (custom) or CID-mismatching ROM's to your device. All you should need to do is flash HSPL and then your custom ROM. Read the Wiki (http://wiki.xda-developers.com/index.php?pagename=HTC_Herald) for this device if you need more information.

I've tried 2 different HSPL now.

It goes well, even says 100 % on phone AND computer but than it gives error 270 'update error'

What now...

[Digital Outcast]

Have you followed this (http://forum.xda-developers.com/showthread.php?t=358225)? I know it works for me...

[Miep Miep Zoeffff]

I've seen it, but where do I have to intall the 3 cab files?
Do I have to install them on the microSD card?
Do I have to put them like this .cab or do I need them to unpack them??

please help!

[Digital Outcast]

Copy them to your phone, install all three on your phone's memory.

[Miep Miep Zoeffff]

ehhhhhhhhhhhhhhhhh How should I do that ??

[Digital Outcast]

Oh right. I'm retarded. You're stuck in the bootloader... Sorry just reading too many threads and getting confused. Have you tried searching for "bootloader" or "Goldcard" in the ROM development forums? There are tons of explanations on how to recover from being stuck in the bootloader.