PDA

View Full Version : WM 6.1: cannot make call with caller ID setting = No one


espanola
27th July 2009, 06:13 AM
My SX66 is running WM6.1 ROM from sun_dream.

Every are smooth except one problem:

When I set the Caller ID service to "no one", I can not make any call.
I do not know why. I test my SIM with another phone, calling works normally. So I guess the problem is on the ROM.
I did search the forum but did not find a clue.

Any suggestion/solution are really appreciated.
Thanks,

Chef_Tony
27th July 2009, 08:56 AM
it is possible that the network setting for caller id varys from country to country but for germany for instance the code is 31.
for getting the status dial *#31#
for temporary sending of your callerid dial *31#
to disable callerif dial #31#
and to get the status of incoming id dial *#30#

either that works for you or you look up the codes for your country and/or carrier and try them, that way, you can tell whether really the setting is broken in the rom or just not compatible to your network and adjust it.

espanola
27th July 2009, 03:16 PM
Thank you for quick reply.
My network uses code #31#, and I tried it but could not make the call. The same with setting "No one"

I guest that the problem is with the ROM.

Chef_Tony
28th July 2009, 10:05 AM
have you tried upgrading your radio rom? the newest one is 1.15.00 and maybe that will do the trick. or you sim unlock your device, or you try another sim card in your device. you know, the possibilities for what went wrong are pretty limitted, but i actually would blame the rom last, since that really hardly affects the calling.