norinsimpel
4th August 2009, 12:04 PM
Hello everyone,
is that it will do some days I want to restart my qtek 2020 v0.6. It was purchased and screen
Black bootloader mode with serial or USB v0.6. I tried hard reset but nothing is there.
When I run the rom flash main with HimaUpgradeUt_noID.exe or HimaUpgradeUt.exe
it refuses to nk.nbf, it makes me country id error 120 or error 112 connection error.
But against n I've no problem for the Roma Radio_.nbf and ms_.nbf the flash is going well until the end.
With mtty.exe I could write the original rom on the sd card and I put on my pc with ntrw_494.exe.
The Roma PPE cause a password to open with ER2003edit.
I wanted to start the application xdadev_all_unlock-v1.6_138.exe or xdadev_all_unlock May-v1.5.exe my pc tells me that this is not a valid win32 application.
As against this for me xda2unlock.exe met:
XDA Developers XDA2UNLOCK tool v1.2 XDA Developers XDA2UNLOCK tool v1.2
This program will extract the unlock code from your XDA II. This program will extract the unlock code from your XDA II.
For this to be possible, a few steps are necessary: For this to be possible, a few steps are necessary:
1. 1. The XDA II needs to be put in bootloader mode. The XDA II needs to be put in bootloader mode.
NOTE: THIS WILL WIPE ALL YOUR DATA SO FIRST BACK-UP! NOTE: THIS WILL WIPE ALL YOUR DATA SO FIRST BACK-UP!
You enter the bootloader by holding the Power button and the Action button You enter the bootloader by holding the Power button and the Action button
while pressing the stylus in the reset hole on the bottom. while pressing the stylus in the reset hole on the bottom.
In the bootloader mode, the display will be gray and say Serial at the top. In the bootloader mode, the display will be gray and say Serial at the top.
2. 2. Next put the device in the USB cradle. Next put the device in the USB cradle. The display will now say USB The display will now say USB
and the first time Windows will detect a new device. and the first time Windows will detect a new device.
3. 3. Disable USB in Active Sync in 'File -> Connection Settings' Disable USB in Active Sync in 'File -> Connection Settings'
Now the device is ready to extract the unlock code. Now the device is ready to extract the unlock code.
Type YES when you have completed the above steps and want to continue: yes Type YES when you have completed the above steps and want to continue: yes
Communication port opened. Communication port opened.
waiting for radio bootloader waiting for radio bootloader
reading first block... reading first block ...
reading second block... reading second block ...
The phone seems unlocked already! Seems unlocked the phone already!
Do not forget to enable USB in Active Sync again! Do not forget to enable USB in Active Sync again!
Press enter to close.... Press enter to close ....
For truly all information of PDA on the origin of the country id and that exact version
there is the device data.txt but for creation must be initiated HimaGetDeviceData.exe that tells me that this is not
win 32 application invalid.
And finally, after searching hard I tried with hex editor on the original rom, change the first line, but there is nothing ...
That is my question is how empty the memory of the PDA to install a new (windows) to
it can restart normally?
is that it will do some days I want to restart my qtek 2020 v0.6. It was purchased and screen
Black bootloader mode with serial or USB v0.6. I tried hard reset but nothing is there.
When I run the rom flash main with HimaUpgradeUt_noID.exe or HimaUpgradeUt.exe
it refuses to nk.nbf, it makes me country id error 120 or error 112 connection error.
But against n I've no problem for the Roma Radio_.nbf and ms_.nbf the flash is going well until the end.
With mtty.exe I could write the original rom on the sd card and I put on my pc with ntrw_494.exe.
The Roma PPE cause a password to open with ER2003edit.
I wanted to start the application xdadev_all_unlock-v1.6_138.exe or xdadev_all_unlock May-v1.5.exe my pc tells me that this is not a valid win32 application.
As against this for me xda2unlock.exe met:
XDA Developers XDA2UNLOCK tool v1.2 XDA Developers XDA2UNLOCK tool v1.2
This program will extract the unlock code from your XDA II. This program will extract the unlock code from your XDA II.
For this to be possible, a few steps are necessary: For this to be possible, a few steps are necessary:
1. 1. The XDA II needs to be put in bootloader mode. The XDA II needs to be put in bootloader mode.
NOTE: THIS WILL WIPE ALL YOUR DATA SO FIRST BACK-UP! NOTE: THIS WILL WIPE ALL YOUR DATA SO FIRST BACK-UP!
You enter the bootloader by holding the Power button and the Action button You enter the bootloader by holding the Power button and the Action button
while pressing the stylus in the reset hole on the bottom. while pressing the stylus in the reset hole on the bottom.
In the bootloader mode, the display will be gray and say Serial at the top. In the bootloader mode, the display will be gray and say Serial at the top.
2. 2. Next put the device in the USB cradle. Next put the device in the USB cradle. The display will now say USB The display will now say USB
and the first time Windows will detect a new device. and the first time Windows will detect a new device.
3. 3. Disable USB in Active Sync in 'File -> Connection Settings' Disable USB in Active Sync in 'File -> Connection Settings'
Now the device is ready to extract the unlock code. Now the device is ready to extract the unlock code.
Type YES when you have completed the above steps and want to continue: yes Type YES when you have completed the above steps and want to continue: yes
Communication port opened. Communication port opened.
waiting for radio bootloader waiting for radio bootloader
reading first block... reading first block ...
reading second block... reading second block ...
The phone seems unlocked already! Seems unlocked the phone already!
Do not forget to enable USB in Active Sync again! Do not forget to enable USB in Active Sync again!
Press enter to close.... Press enter to close ....
For truly all information of PDA on the origin of the country id and that exact version
there is the device data.txt but for creation must be initiated HimaGetDeviceData.exe that tells me that this is not
win 32 application invalid.
And finally, after searching hard I tried with hex editor on the original rom, change the first line, but there is nothing ...
That is my question is how empty the memory of the PDA to install a new (windows) to
it can restart normally?