Hello, please help me...

[raymondht]

Hello i have problem changing my ROM to the original ROM... My phone is Dopod 838 Pro, now my ROM is "GoldenGlobe_Black_WWE_V10"... for me its not stable... there are times it freeze up... Now I downloaded the orginal ROM from the HTC website. I fallow the instruction from the site, when i reach the part bootloader, after a few seconds I get this messege.. "ERROR [260] : UPDATE ERROR".... Please help whats happening with my phone...:D:D

NOTE:
I do apologies if this problem is common. if theres a solution please guide were to find, or if you know how, it would be nice if you'll provide it... thanks...

This is the messege:!!
http://i630.photobucket.com/albums/uu22/newtrendphotography/ADS/Untitled.jpg

[isaac12]

if you like not to bite you to fix it via a memory card. changes you ruu_signed.nbh to HERMIMG.nbh. you know how he is and not as you write here. turn off the phone. and to enter bootloader using the buttons on the left side of the phone and right side. written on the keys is ok and the second is a button-down / power key. the two buttons pressed and the current bootloader does not start. when to place. so sorry. Sorry but my English is poor:confused::(

[ted presley]

It seems that you're using Vista or windows 7. Try to find a windows XP computer and up that rom again.

[+ Que PPC]

Some ports are opened!

Lemme xplain this... osmetimes the drivers of our pcs gets closed and opened constantly in some proceses and in the upgrade it happends so... softreset your device it must go to bootloader reconect your phone and try again... if not works...

Do the upgrade via SD: as the guy upper tell you change the nbh name as he says and copy the file to your CLEAN!!! micro SD 1-2 Gygas it doesnt works in MicroSD bigger than 2Gygas ok? insert the SD and reenter to Bootloader it beguns to upgrade... be sure your batt has enough charge... more than 50% MORE than that! i suggest.

[idbl_fanatic]

Mine does the exact same thing everytime, on Windows XP, here is what I do now.

Run it, and when the phone gets to the red, white, green, etc screen, and says USB across the bottom, unplug the USB cable, and plug it back in, this works everytime for me.

[darkpokemon]

it is easier and a lot safer to use sd card flash

[raymondht]

i'll try all of your suggestions... if nothing happens :(, hopefully not... what ROM is stable? ROM does not freezes up... thank you and have a good day.:D:D

[raymondht]

I tried the SD card upgarding... after updating it froze up welcome part.... nothing happens... by the after the Updating Complete what will I do?

[+ Que PPC]

redo the same thing but first.... upgrade the stripped original att
wait till the bar reach 100% and start boots... then unplug the sd card...
perform a hardreset let it boot... the upgrade again with sd card wichever rom you want and unplug the sd card when the bar reach 100% and start boots... then when it is in welcome splash image... perform hardreset!!!

I will write this f·$"n leyend in my siggy!!!!!

[raymondht]

How do i do the upgarde stripped original att? and were can DL the file... and can i do using SD upgrade..

[+ Que PPC]

almost all the chefs (include me) we have at first post of our roms thread a link to it... just DL it unpackit rename it... and copy it to the sd inserted and follow the steps... i told you! oh if mine doesnt works, try yours... seems that works fine

oh charge your battery dude.

[raymondht]

worst things happened... please help....

-After doing an SD card upgrade in bootloader screen using the original ROM from HTC.com:

Status of my Dopod 838 Pro:
Stuck at the Welcome Screen that says "Windows Mobile"..

- I tried to do a SD upgrade at the bootloader again I get a messege 028002
"not allow", it returns to boot loader... :(:eek:

- I tried doing a bootloader updating using my PC... I only 1% then shut the phone down :eek:

- Please help me... I cant use my phone anymore... please help... thanks...
:):):):(:(
By the way the bootloader says

HERM100
IPL-1.04

HERM100
SPL-2.03

Maybe this can help the situation.... thanks...

[liam12189]

on vista/7 right click go to properties and copatability try putting it into windows xp mode and give it admin rights ..

if that don't work try putting the phone in bootloader mode then connect to ur computer and try flashing a rom this way..


good luck

[+ Que PPC]

worst things happened... please help....

- I tried doing a bootloader updating using my PC... I only 1% then shut the phone down :eek:

- Please help me... I cant use my phone anymore... please help... thanks...
:):):):(:(
By the way the bootloader says

HERM100
IPL-1.04

HERM100
SPL-2.03
Maybe this can help the situation.... thanks...

NO WAY!!!!!!

You are not hardspled!!!!! what happend Tho you have unlocked your device!!!

Man how could you upgrade the SPL in that way!!!!!!??????

I think that your phone goes off because you dont have enough battery to upgrade.... or maybe its just that the SPL is not unlocked!!!

Man this is serious!

you need an XP you need your battery fully charged
try to get a new USB cable... and try to get a ROM that match to your Carrier and country... this is no good... check the Siganture of CRCinAU he has a repository of shipped original ROM.

[raymondht]

I basically download the ROM version from www.HTC.com... Here's the direct site of the download:
"http://www.htc.com/sea/SupportDownload.aspx?p_id=37&cat=2&dl_id=197"

ROM info:
Release Date:07/21/06
ROM Version:1.23.707.4
RF Module Version:1.06.00.10
Protocol Version:32.37.7010.01H
-----------------------------------------------------------
what is repository shipped...?

what are the steps I need to do fix the issue.?:D

[+ Que PPC]

go here http://wiki.xda-developers.com/index.php?pagename=Available%20Original%20Shipped% 20WM6%20ROM%20Versions

or here http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades

search for your carrier and or language that match to your country...

and try to upgrade with the activesync!! not SD

Once you get it... enter to Bootloader and start the upgrade... make it on XP!!!! nad with many batt!!!... unplug your sd card and the sim too (dont think its fine but for prevent issues.)

how could you do it without hardspl!!! thats because of not read... and do things without ask.

[raymondht]

How would I know if i'm downloading the right ROM?
I'm from the philippines
at the back of unit says:

HERM100
FCC ID: NM8HERM100
DOPOD 838 Pro

IMEI: 355714011259410
S/N: HT726F203694
P/N: 99HC8032-00

[raymondht]

"how could you do it without hardspl!!! thats because of not read... and do things without ask. ":confused:

I just want to QUOTE this.... I always tried doing HardSPL before I change my ROM, I'm not dumb okay... but it disconnect my PC from my phone... and correction sir I can READ... no need to remind me... Thanks by the way for your HELP...:D

[+ Que PPC]

Jajaja so

if you do the HardSPL...


HERM100
IPL-1.04

HERM100
SPL-2.03


No you didnt...

Well the PC gets an error so... why try to upgrade instead of try again the hardspl?

in fact is not the problem here who has the true or who cant read...

the important thing here is to know how you fon can be restored by the original shipped rom for dopod

so
try then one by one
we only need that the rom boots!!! to apply the hardspl.

[raymondht]

Sorry about the previous aligations regarding "reading"... I was so frustrated that time, bec my phone broken.... I do Apologies!... By the way sir just addup I saw a "No GSM" on startup... Thank you and have a great day..:)

[+ Que PPC]

Well yeah i need to apologize too... sorry dude... outside in hermesupgrade subforums is a thread saying something about the brickes NO GSM how to fix... maybe it is some fixes for you...