ANyone can Please Help

[neggie]

Ok i just had a unlocked att tilt it was sim and rom unlocked
it said it was spl-3.29.hard someone did it for me and i dont know how

it craped out on me and i just got my warranty phone from att
it has rom version 3.57.502.2

and spl-3.56.0000

so much info here im really lost yes ive read and look but still confused what i want to know is what files am i suppose to use to get this back to
spl-3.29.HARD and security unlock and sim unlocked

again ive read lost of info here but still confused on what files and what is procedure to do so

[stylez]

The STICKY holds all info needed....

[neggie]

ok so let me get this right this is what i need to do to get back to spl-3.29.HARD correct ? please verify here it goes
MAKE SURE YOUR KAISER HAS AT LEAST 50% BATTERY POWER FIRST

2. Download and Unzip *THIS* File

3. Flash HardSPL 3.29 [ESSENTIAL]

Flashing via ActiveSync with USB Lead
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
3. REMOVE SIM and SD CARDS!!
4. Turn phone back on and let it boot back into your operating system
5. Connect your phone to PC with a USB cable and wait until it syncs with your PC
6. Run File Explorer on your phone, browse to where you copied JumpSPL1.56-KAIS.exe on your device and run it (make sure the USB cable is still connected). If you get a white screen then reset your device and now try JumpSPL1.93 and lastly try JumpSPL1.94 if that one doesnt work.
7. CLick Continue on phone when prompted
8. After a few seconds the tri colour screen will appear on the phone and "USB" will be displayed at the bottom
9. Unplug the usb cable for 30 seconds and then Replug (phone will not re-sync but still says "USB" on the screen)
10. Right click on the Activesync icon in the bottom corner icon on the computer, goto connection settings, deselect "Allow USB connections" and click "ok"
11. Run the KaiserCustomRUU.exe file on your PC thats in the same folder as the HardSPL .nbh file and follow instructions (ticking boxes and clicking Next) *DO NOT re-enable USB Connections in Activesync*
12. Update will goto 100% (should take less than a minute), the Congratulations screen will be displayed on the PC and the phone will restart
13. Unplug USB cable from phone then REPLACE SIM and SD CARDS !!
14. Restart phone

this will let me flash my phone,to any rom like rodgers, htc, ext.....AFTER THAT

Now confused on how to sim unlock my phone and do i have to change my radio to use anyother rom??? right now current radio is 1.65.21.18

[stylez]

Read the noobs guide to flashing follow steps any ?'s please post in that thread.

Thankyou.

[neggie]

thanks DUDE got it unlocked and gtg did what you said i appreciate it

[msd24200]

thanks DUDE got it unlocked and gtg did what you said i appreciate it

kool now read forum rules about starting new threads, follow those rules and you should be good to go