PDA

View Full Version : Second problem with my Hermes

Shappy
18th August 2009, 06:47 PM
Hello, I post this problem in sepparate thread because it's completely different from the first (the slider).

The problem:

When the UMTS network is enabled I can make and receive calls without any problem. If I turn the UMTS/3G off from the menu or if there is no coverag I can't receive calls . If somebody calls me he receives recorded operator message "the subscribers telephone is not switch on". After that I receive notification that somebody called me.

I have flashed the latest radio rom, but no change .

Please give me some ideas ;)

Thanks !

Ivailo
Shappy
19th August 2009, 04:28 PM
Mistake sorry.. The problem still not solved
Shappy
23rd August 2009, 02:14 PM
Nobody with same problem ?
Rudegar
23rd August 2009, 03:54 PM
it's not your phone but your phone company's which equipment have the issue
nothing you can do well apart from changing phone company

mine is never like that
Shappy
23rd August 2009, 04:50 PM
it's not your phone but your phone company's which equipment have the issue
nothing you can do well apart from changing phone company

mine is never like that

It's OK, but how other Hermeses works with this network ?
Rudegar
23rd August 2009, 06:32 PM
all gprs able devices would work the same way with your network
playdo
25th August 2009, 02:01 PM
Which Radio ROM did you flash?

The best is to flash the shipped Radio ROM back to your phone.
This one should work on your phone.


greetz

playdo
Shappy
4th September 2009, 12:51 PM
Hello, I was on vacantion last week. Thank you for your replies ! I've tried most of the radio ROMS and it seems to be a hardware problem. I've opened the phone and there are 3 issues:
1) The yellow element in the center of this photo seems to have broken corner ( maybe it's antenna switch ):
http://img297.imageshack.us/img297/87/dsc06513.th.jpg (http://img297.imageshack.us/i/dsc06513.jpg/)

2) Some 0 Ohm resistor is shorted with wire ( may be this is not problem ) :
http://img220.imageshack.us/img220/3017/dsc06517.th.jpg (http://img220.imageshack.us/i/dsc06517.jpg/)

3) There are two missing capacitors near the flex cable connector:
http://img221.imageshack.us/img221/5845/dsc06519.th.jpg (http://img221.imageshack.us/i/dsc06519.jpg/)

Please give some suggestions. Thanks !

Ivailo