AT&T Kaiser Seriously Stuck!! NEED HELP!

[big3]

**MY PHONE IS NOW WORKING***

Hey guys,

I am going to start by saying that I have read almost every single sticky, thread, wiki and anything else I could get my grubby hands on to try and solve my problem; but I fear I may have missed something, or done it wrong.

Now to my problem. My friend who had the same phone as me did a HardSPL flash a long time ago and gave me some new ROM. It worked for awhile but wasn't great so we changed to a different ROM. After awhile I got sick of this one and all of its bugs so about 3 days ago we got some with windows 6.5; unfortunately something happened; causing it to be highly unstable, so we switched AGAIN.

Now to my problem. It will not boot. If I just let it boot without doing anything *or if I hit keys* it goes to an hTc TyTn2 screen with the R; G; and D displayed. I tried to flash it via Micro sd card but all I get is a white screen with blue "loading..." and nothing; it will sit there indefinitely. I have been following cmonex's instructions to a "T" and I am stuck. I attempted to do the USB route and the phone will display the tri-colors and say USB, but my computer *Vista* isn't seeing the phone. I tried different USB ports etc. and nothing. Please let me know what you guys think; anything would be greatly appreciated.

~big3

[grayfoxmg1]

I would recommend down-grading to xp. But if you can't try to explore the drive as a removable driver

[Quetzecotyl]

Are you sure when you flashed it via MicroSD you had only one file named KAISIMG.nbh on the card?

[brandonmangan]

This happened to me about a month ago, if it's still going to bootloader there is a good chance you can recover but the process is a bit intricate, especially to a newcomer like myself. I spent more time reading on how to fix this issue than I did on the entire process of flashing roms, mtty specifically. These are the threads I used to get running again, don't lose hope. I assure you the your answer is there.

http://forum.xda-developers.com/showthread.php?t=397157&page=4

http://forum.xda-developers.com/showthread.php?t=371154

http://forum.xda-developers.com/showthread.php?t=370169

[big3]

I am sure. I even reformatted the sd card to a FAT32. It goes to a loading screen then freezes. I can also get it into the tri-color screen and have it say USB at the bottom, but when I try and flash it via USB; for some reason it starts at 0% and then crashes.

[big3]

I am able to work with it in MTTY and I had to use a Task 8 command for anything to happen. I was told my friend already did a HARDSPL; is it possible that this was deleted/ corrupted?

[DaveShaw]

Put your phone in bootloader mode what does it say?

Have you tried a Hard Reset yet?

Ta
Dave

[big3]

hey everyone, My phone is temporarily working at this point!!!

My new question is, how do I know if my friend really put a HardSPL on my cell the first time. I know that one way to tell was through MTTY and boot command, but my cell didn't respond to that. My friend said he put a HardSPL on; would doing it again hurt anything?

[DaveShaw]

hey everyone, My phone is temporarily working at this point!!!

My new question is, how do I know if my friend really put a HardSPL on my cell the first time. I know that one way to tell was through MTTY and boot command, but my cell didn't respond to that. My friend said he put a HardSPL on; would doing it again hurt anything?

Put your phone in bootloader mode and if it says "hard" next to "SPL:" it's got a hrd SPL version.

Ta
Dave

[big3]

I am trying to flash a HardSPL to my phone; the computer see's the device but will not allow me to copy any files to it. When I go though the sync center, it begins to connect then says error. What should I do?

[DaveShaw]

I am trying to flash a HardSPL to my phone; the computer see's the device but will not allow me to copy any files to it. When I go though the sync center, it begins to connect then says error. What should I do?

Try copying them via the SD card using a card reader if you have one.

Ta
Dave

[big3]

tryd that, all it does is say loading and pretty much stays there indefinately.

[DaveShaw]

Right, lets take a step back...

You don't have Hard SPL at the moment?
If not, the best guide for flashing Hard SPL is here : http://forum.xda-developers.com/showthread.php?t=433835

Follow through what mskip advises and let me know if you get stuck and at what point.

Ta
Dave

[big3]

I get stuck at the very first step were you are supposed to copy the 3 different JumpSPL files. I even tried copying a word document and it said "the file Reference could not be copied. It may not exist or cannot be transferred."
My computer can access the phone, but I cannot transfer anything to its memory. I also tryed copying it to the sd card while it is in the phone and it gives me the same error. Active sync whont work either, just keeps saying error.

[DaveShaw]

I get stuck at the very first step were you are supposed to copy the 3 different JumpSPL files. I even tried copying a word document and it said "the file Reference could not be copied. It may not exist or cannot be transferred."
My computer can access the phone, but I cannot transfer anything to its memory. I also tryed copying it to the sd card while it is in the phone and it gives me the same error. Active sync whont work either, just keeps saying error.

Try deleting and re-creating the partnership... Do you have Office installed, this might stop if working.

Do you have a Card Reader, put the card in there and put the files on the card that way.

Failing that MyMoblier let's you copy files, I think it works differently to AS.

Dave

[big3]

i have deleted the partnership and created a new one, and it doesnt work. As for mymobiler; the website will not load for me on either my desktop or laptop.

[big3]

one thing i just tryed which was interesting was to load the 3 JumpSPL files onto the sdCard and then copy them to the phone's main memory. It wouldnt allow me to do this. How do I remove the read/write protection on the phone?

[msd24200]

Hey guys,

I am going to start by saying that I have read almost every single sticky, thread, wiki and anything else I could get my grubby hands on to try and solve my problem; but I fear I may have missed something, or done it wrong.

Now to my problem. My friend who had the same phone as me did a HardSPL flash a long time ago and gave me some new ROM. It worked for awhile but wasn't great so we changed to a different ROM. After awhile I got sick of this one and all of its bugs so about 3 days ago we got some with windows 6.5; unfortunately something happened; causing it to be highly unstable, so we switched AGAIN.

Now to my problem. It will not boot. If I just let it boot without doing anything *or if I hit keys* it goes to an hTc TyTn2 screen with the R; G; and D displayed. I tried to flash it via Micro sd card but all I get is a white screen with blue "loading..." and nothing; it will sit there indefinitely. I have been following cmonex's instructions to a "T" and I am stuck. I attempted to do the USB route and the phone will display the tri-colors and say USB, but my computer *Vista* isn't seeing the phone. I tried different USB ports etc. and nothing. Please let me know what you guys think; anything would be greatly appreciated.

~big3

did you ask this question in those threads? i just searched all your posts and im not seeing where you asked in those threads before you started a new thread.

didn't see where you tried to flash stock rom either, i recommend trying to flash it, and flash stock before you flash any cooked roms.

[big3]

i never said I did any of the flashing. my friend did it all, and he claims to have done the hardspl. he then loaded new ROM onto the phone. Since he is no longer around, and everything has gone hay-wire, I am trying to fix it.

Here is my new situation; I can get the phone to fully load into the rom, but it does not have the HardSPL installed. The computer will recognize that the phone is plugged in, but active sync will not connect; just says error. If i go through "my computer" and try and copy files that way it says: "the file Reference could not be copied. It may not exist or cannot be transferred." I have tried to just re-flash it *because i really need it up and running* and the programs just say they cannot. I even used CID unlocker and it says it failed. I just don't know where to go from here.

[mwcostello]

Try doing a Hard Reset and see if your symptoms change. NOTE: Remove the SD Card.