PDA

View Full Version : 8125 full of crap files/programs,cleared storage,usb bad,SD Card Rom Upgrade possible


Vegaslightsss
25th August 2009, 06:33 AM
Hi All,I bought an 8125 Cingular Device (I am att),it had shells,and programs installed and unistalled so many time along with must have been 25 different trick little "Mod" programs,this thing didn't know which way was up, So I cleared the Storage and let it download all of the default stuff, THE IPL/SPL are both at 2.25. The Computer won't recognize the USB Connection though I can recharge through the port just fine,when in "Com Manager" there is no way to enable Activesync,no matter what it has a "Check" through it,i think it is hardware screwed inside.It has Windows 5 on it ROM Version 2.25.11.1 WWE Dated 5/11/2006,Radio 2.25.11,Protocol 4.1.13.12,Ext Rom Version2.25.11.102,I have tried many different things to get it to recognize the USB to Activesync with no go. I don't think it is CID unlocked or SIM Unlocked. Is there a way to Upgrade my ROM (from what I gather it is a G4)using the Storage Card? There was a shell from SPB on it that was all screwed up with Pocket Plus 3.2 ,My son put a SHell on it 3.01 Final in order to try to make it behave better,It was some better but it has had so many Mods in and out of it with I am sure shared files being deleted that I decided to clear storage.SO,Now I am back to stock with the SPL/IPL at 2.25 and A Non Functioning USB COnnection,I know the Cable and PC are good as we have several other smartphones in the House all working fine. I would like to put the Wizard 6.5 or a Cooked 6.1 on it.I have downloaded the 6.5 ruu and was hoping to install it with the storage card method.can the phone be unlocked by placing the lokiwizprog on the storage card with the PC?Thank You in Advance for any Info you can provide in Advance. I have read probably too many threads and confused and probably over complicated the process.I have seen the "bricked" posts and don't want to go there.It is not a matter of laziness that has me inquiring,I have upgraded several different types of phones and have been in the Satellite Hobby Many years ,so I am fluent in Flashing Chips,loading software ect. So Far I have Downloaded "the Buttom Rom","Lokiwizb", and the "6.5 Wizard Rom"Thanks,Vegas

-MyHTC-
25th August 2009, 09:23 AM
In short you won’t be able to do any of the things you want without a functioning USB port.
So let’s find out if the USB port really doesn’t work.
Turn the phone off, press and hold the camera key, now insert the USB data cable, you must continue to press and hold the camera key until you see the boot loader screen.
On the boot loader screen you will see IPL SPL and on the bottom of the screen USB, if you don’t see the USB on the bottom of the screen then something is wrong with the USB port.

You suggest your phone is a G4 yet you put IPL\SPL “2.25”
If your IPL\SPL 2.25 = G3
If your IPL\SPL 2.25.0001 = G4

Enclave
25th May 2010, 11:47 AM
I'm having same problem on my wizard, however I resoldered the mini USB port.
It did pop up in Win 7 x64 generic RNDIS driver not installed, no other indications of it being connected, charges fine, boot loader detects USB at bottom of screen, tested on XP also with no positive results.