Bootlooader problem, cannot enter bootloader

[koma2k]

HI!

First of all... great forum.

Than.. I''ve got an Arte (SPV M650 from PL orange).
I've flashed it few times, trying to find ROM most fitting my needs.

So please don't answer if U want to teach me how to perform a SR, HR, BL enter. I really know that, i did it few times already :)

Problem is, that for some time, i can't get into bootloader. I want to flash my Arte again, now with Shady's ROM, but... i can't get into bootloader.

If anybody have a REASONABLE idea for help i would be grateful.

THX I A

sorry for my eng...

[kingoldstyle]

Same problem, when i wan t to go in bootloader is showing me a White screen.

Solved in this way: Hope is helpfull

I have a microsd card of 128Mb.

I put there a image of a rom, and rename it just like in sdcard flashing way "ARTEIMG.nbh". The i press it the tow side buttons ( off and voice ) and with slytus i reset keeping after reset the 2 buttons pressed. :eek: is comming in the bootloader mode, but is not flashing the image i put it in card. SO after that I install what rom i want.

This is my ay to escape from white screen and entering in bootloader mode.

[Rakim2]

my htc P3300 is blocking at boot menu( white screen ..htc..ipl 1.12.0001 SPL 1.12.0000 GSM 02.67.90 OS 1.12.0.0) i can not succed to make anything. so if you can help me it wil be great.. i also speak romanian so maybe it will be easyer to tell me everything in romanian. thanks alot.

[*mike94*]

Hi @all, try holding the power and record button and pushing the reset button. than you get into the bootloader. (hold power and record after resetting, too)
now you can practice sd card flashing.
i hope i can help you...
mike

[Andilek007]

where is the reset button? pls

[Andilek007]

Same problem, when i wan t to go in bootloader is showing me a White screen.

Solved in this way: Hope is helpfull

I have a microsd card of 128Mb.

I put there a image of a rom, and rename it just like in sdcard flashing way "ARTEIMG.nbh". The i press it the tow side buttons ( off and voice ) and with slytus i reset keeping after reset the 2 buttons pressed. :eek: is comming in the bootloader mode, but is not flashing the image i put it in card. SO after that I install what rom i want.

This is my ay to escape from white screen and entering in bootloader mode.

but...i do this and when i on my PDA , report "Invalid Certificate" ... pls help