[Solution] How to make an uploadable image of an SD backup image

[-MyHTC-]

First your phone must be CID unlocked to make a backup image

Programs you will need
MTTY (http://www.4shared.com/file/136656478/53800312/mtty.html)
USB Image Tool (http://www.alexpage.de/download/usbit/usbit.zip) "Developer’s web site" (http://www.alexpage.de/?page_id=41)

Instructions:

1. Open ActiveSync go to Connection Settings and uncheck “Allow USB connections”.

2. Put the phone in boot loader mode.
Turn the phone off press and hold the Camera key, now insert the USB cable, Keep holding the “Camera” key until you get the boot loader screen.

3. Insert formatted SD card, 128mb or larger.

4. Start MTTY select Port: = USB click the “OK” button, you don’t need to change anything else.

5. Type “set 32”
“CMD55 failed” = SD card not properly inserted.
“g_cKeyCardSecurityLevel = 0” = CID unlocked, if not you didn’t read the first line of this post.

6. Type “r2sd all” this will create a full backup, don’t interrupt the process, wait for it to finish.

7. Type “ResetDevice”

8. Remove SD from phone, insert SD to computer.

9. Open USB Image Tool, select “Device Mode” from the drop down list, select the SD card and click “Backup”.

To write the SD image to an SD card select the SD card you want to write to and click “Restore”.

Now we move on to restoring the image to the phone.
With the phone on, insert the SD card in the phone, press and hold the “Camera” key and soft reset, keep holding the “Camera” key.
When asked, “Download SD Image?” release “Camera” key and press the “Voice Dial” key.

Hopefully that covers it.

This could be a viable way for people who have broken USB ports to restore/upgrade their phones.

[-MyHTC-]

Current images:


These are official stock ROMs

Cingular 8125 G3 (http://www.4shared.com/file/136850499/a56520a6/Cingular_8125_G3_SD_Backup_225111_22511102_022511. html)

T-Mobile MDA G3 (http://www.4shared.com/file/136809218/abde2670/T-Mobile_MDA_G3_SD_Backup_226102_22610105_022511.htm l)

T-Mobile MDA G4 (http://www.4shared.com/file/136655973/de3fe627/T-Mobile_MDA_G4_SD_Backup_226102_22610105_022511.htm l)


I will list more as I make them

[-MyHTC-]

Reserved For Future Post

[RoryB]

Tried image on my phone and it did not work. So I opened MTTY and ran ( set 32 ) and got CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FFI believe FF means it is locked.

So I tried info 1 which gave 2.21.Olipro.

Sounds like I broke the HardSPL but did not change the SPL from 2.21.Olipro.

Sounds like truly a brick now.

[-MyHTC-]

You are correct.
g_cKeyCardSecurityLevel = FF
Means CID locked.

[-MyHTC-]

I noticed a few downloads have been made but no comments.


What I want to know:


1. Did the ROM images work?


2. Do you have a broken USB port?


3. Did you have another reason for downloading the image?


What im trying to get from these questions:


1. Has anybody been able to use these images?


2. Should I continue to upload images?


3. Was this thread pointless?

[stormlabs]

I noticed a few downloads have been made but no comments.


What I want to know:


1. Did the ROM images work?


2. Do you have a broken USB port?


3. Did you have another reason for downloading the image?


What im trying to get from these questions:


1. Has anybody been able to use these images?


2. Should I continue to upload images?


3. Was this thread pointless?

Well, i'm about to try to use the T-Mobile G4 image on my WWE QTEK9100 G4. Its stuck in the screen right after bootloader (that shows the versions) and i can't get it to boot or flash anything. I just want to get a ROM in it that boots so i'll see if that works.

[-MyHTC-]

Thank you for responding.
I noticed from your other thread that your using the hard SPL and your having problems installing ROMs.
With the hard SPL installed im not sure this method could help you, please let me know if it does.
If your still having problems let me know I will try to help.