My treo 750 wont boot

[thenyboy]

Hello people!! i've been reading this forum for a loong time and yesterday i decided to register.I really like this forum but i have a problem.

While tryng to flash my 750 it stops in GSM an it doesn't pass that part and now it only starts in the bootloader screen.

The first two parts, are OK, but then stops in GSM.

Is there any way to make it pass? or to make it boot WM again.

I've tried with diferents WM version (2.23, 2.27 an with WM5) but it's the same.


Can someone help me please?

Thanks in advance!!!

Regards!!!

[startngate]

Did you Hard SPL the phone before trying to flash a ROM?

[thenyboy]

Did you Hard SPL the phone before trying to flash a ROM?

Thanks for your answer.
I've been reading about the Hard SLP but it needs an active sync conection, and I can't do that.

I read it from here.

http://forum.xda-developers.com/showthread.php?t=511763&highlight=hard+slp

Is it the right post?

Thanks a lot!!!

[konker]

Thanks for your answer.
I've been reading about the Hard SLP but it needs an active sync conection, and I can't do that.

I read it from here.

http://forum.xda-developers.com/showthread.php?t=511763&highlight=hard+slp

Is it the right post?

Thanks a lot!!!
HardSPL is necessary for you to flash to a non-carrier/custom ROM.
If you have the original ROM with you, you can restore the phone from that ROM package.
Whatever the case, do yourself a favor & find someone with a Windows computer & flash the phone from the desktop ROM package.

[thenyboy]

Ok, but the thing is that my treo won't boot WM so i can't have a conection with active sync and i can't run de upgrade for desktop.I've already tried that and it doesn't connect.

That's my problem.

it only boots on bootloader screen and shows:

Palm Tr
IPL-0.20

Palm Tr
SPL-0.24.0000

Thats why I can't upgrade using the USB method.

Thanks Again!

Regards!

[thenyboy]

I'm still in the same situation. :(

is there any way to Hard SLP with and SD card?
Is it possible without using a desktop computer?


Thanks!!

[konker]

I'm still in the same situation. :(

is there any way to Hard SLP with and SD card?
Is it possible without using a desktop computer?


Thanks!!
From the bootloader screen information, it's obvious you had a stock ROM & had not performed HardSPL.
But since your Treo is able to load the bootloader, all it needs is a stock ROM to be flashed using the SD card method.
Search around here for the SD card updating method & the stock SD update file.
Extract the ROM image onto the SD card according to the instructions & you'll be able to flash the stock ROM onto the Treo.
Once you did that, your Treo should be able to boot WM & you can then perform all the other steps needed to flash a cooked/unofficial ROM onto it.

[QuakerOatz]

..........