AZERTY Keymap for 3VOLUTION SERIES - Build 3VO.2.80.092509

[georgeot]

Hello,

I have a Excalibur with French AZERTY Keyboard, and you'll find in attachment a keyboard Layout in order to have AZERTY layout.

Just copy the .TXT file to \Windows folder with RESCO Explorer.

[guytarr]

Ca ne fonctionne pas pour ces 4 là, une idée ? Je met juste les lignes concernées. Le fichier est bien pris en compte puisqu'en modifiant le mappage sur d'autres lettres ça fonctionne
//
// N O T E: This file must be saved as Unicode

//
// This file contains the virtual keys mapping table for the
// Excalibur device. The mapping table is define as follow
//
// VK_TPOUND = 0x78
// VK_TSTAR = 0x77
// VK_TAB = 0x09
//
// We do not support escape value yet. So the key/char values should be
// entered explicitly or by encoding start with 0x
//
// Format:
// {VK VK' CH1 CH2}
// VK -> value from keyboard driver
// VK' -> printed on keys
// CH1 -> symbols produced by Fn + key
// CH2 -> symbols in 123 mode
// KeyIndex -> matched the kdb key index, 0xff -> no key index
{Q A % % 0x00}
{1 Z 1 1 0x01}

{0x78 Q # # 0x0a} // VK_TPOUND maps to Device Button A

{0x77 W * * 0x13} // VK_TSTAR maps to Z

{0xE9 0xE9 0xC1 0xC1 0xff} // Launch Camera with Fn

[georgeot]

Merci pour ton retour d'information. Pour ma part, ce Keymap a bien fonctionné.

Thanks for your feedback. For me, the file works fine.

[guytarr]

c'est bien sur cette version 3VO.2.80.092509 et sans autres modifications que tu as pu le faire fonctionner ? J'ai flashé la rom 2 fois, sans rien faire d'autre après installation, j'écrase le fichier avec le tien depuis resco, et toujours le pb pour a/q et z/w. Très étonnant ???

After a fresh install (rom flash), no other install but resco and this file, i can 't get my azerty keyboard for A and Q and Z and W. it's work for all other key, very strange. I try 2 times... sorry stylez for the first french post

Ok, I understand now, it's working only in abc mode, not in xt9 french mode. What can i do to have the right keyboard in xt9 french mode ?

Finally i found a cab file, i think it's for wm6.1 but it's work !! in both mode (abc and xt9) see at the bottom of this tread, on first page, post#20here (http://www.modaco.com/content/excalibur-excalibur-modaco-com/255603/excalibur-et9-language-pack/)
s620_Lang_Pack_v1_2.cab

Great !

[stylez]

c'est bien sur cette version 3VO.2.80.092509 et sans autres modifications que tu as pu le faire fonctionner ? J'ai flashé la rom 2 fois, sans rien faire d'autre après installation, j'écrase le fichier avec le tien depuis resco, et toujours le pb pour a/q et z/w. Très étonnant ???

XDA is an English language forum provide translation when you post.

[maartenva]

Hello,

I have a Excalibur with French AZERTY Keyboard, and you'll find in attachment a keyboard Layout in order to have AZERTY layout.

Just copy the .TXT file to \Windows folder with RESCO Explorer.

How does this exactely work? I copied the file to the device (HTC S620) and then I've copied the txt to windows folder with the resco explorer.

I've done a soft reset but it stil remains in qwerty. Dit I do anything wrong?

Thanks

[fla242]

Finally i found a cab file, i think it's for wm6.1 but it's work !! in both mode (abc and xt9) see at the bottom of this tread, on first page, post#20here (http://www.modaco.com/content/excalibur-excalibur-modaco-com/255603/excalibur-et9-language-pack/)
s620_Lang_Pack_v1_2.cab

Great !

Thanks for the information !

Works fine in ET9 mode but not in the dialpad :(

I was looking for such cab since a long time :)