[Android] senseHERO-v1.3.3 for the Vogue

[zenulator]

senseHERO-v1.3.3 by ccryowski ported to the Vogue.

http://i219.photobucket.com/albums/cc228/MANUP456/PromoBannerSenseHero.png

Run it like the regular hero builds.

Download: Standard HTC Sense (not themed) (http://dl.dropbox.com/u/2888561/system-sensehero-20091009.sqsh)
Download: Themed by manup456 (see pic above) (http://dl.dropbox.com/u/2888561/system-sensehero-manup-1.3.3.sqsh)
Youtube video by jamezelle from his build. (http://www.youtube.com/watch?v=of-bciUJMi0)

[badnews640]

Hey, great work. although i keep getting stuck on the booting linux screen?

[jamezelle]

wow zen i just upload this for enate... im running it now. its damn fast. great minds think alike lol :p

[zenulator]

wow zen i just upload this for enate... im running it now. its damn fast. great minds think alike lol :p

i wasn't going to put out any more sense ui builds but this is the smoothest sense ui build i've used.

[jamezelle]

i wasn't going to put out any more sense ui builds but this is the smoothest sense ui build i've used.

yea i definitely have 7 pages full widgets and its almost as smooth as ion. it just works! of course my build is evil:D. but thanks to enate that doesnt matter....

[mfpreach]

Whats the best Res for this?

[jamezelle]

Whats the best Res for this?

c'mon man its a hero build...seriously? :p 320x480 lcd 160

[deathpod]

default.txt parameters for hero/magic htc sense ui and htc rogers builds
mddi.width=320 mddi.height=480 lcd.density=160

Just like the other hero builds.


** Oops! I'm too slow jamezelle.

[badnews640]

so is there any fix?

[jamezelle]

so is there any fix?

soooooooooo...... is there any fix to what...?

[mfpreach]

My bad, I haven't really been messing with hero because it used to be so slow.
I got confused because I saw Zen post 2 diff. reso's on a diff hero build.
Anyways, thanks.

[refthemc]

Dude I was just downloading this but cancelled it, my Eris is hopefully coming tomorrow!

[TheKartus]

I am once again tempted by a hero build almost as fast as Ion. I'll give it a try tomorrow. Good work Zen.

[jamezelle]

my crappy ass video of senseHERO v1.3.3 :rolleyes: http://www.youtube.com/watch?v=of-bciUJMi0

[duchoang81]

Hi zenulator , could i use this build for my kaiser, it look like the fastest sense build I've ever seen.

[badnews640]

soooooooooo...... is there any fix to what...?

when i attempt to boot haret it gets stuck on the booting linux status bar screen and i have to soft reset.

[zenulator]

it should work on kaiser. i haven't tested it.

[KERKEDAGAIN]

woah woah..hold the phone!! what's with the missed call notifications on this build??!! IT WORKS!!

[ali3nfr3ak]

hi, is there another way to clear the widgets already enabled , other than trying to tap and hold and drag to bottom... this way is not so easy lol thanks

[zenulator]

hi, is there another way to clear the widgets already enabled , other than trying to tap and hold and drag to bottom... this way is not so easy lol thanks

on the home screen push menu then select scenes and select clean slate.

[ali3nfr3ak]

on the home screen push menu then select scenes and select clean slate.

Ok thanks ill try that :D

[socram2k]

thank you for the build, its very smooth

each time I push the red button for going to home it has to load sense again. Is there a way to solve this?

[mattcoz]

Works great! Except for not being able to move or remove widgets.

[sricke]

Trying the new "themed" Hero...... Seems to boot, but could first boot take awhile? Been about 5 minutes, and the screen goes back and forth between "htc" splash and the "hero" splash.....

What do I need to do? Sorry, I am sort of a noob with this.

[TheKartus]

thank you for the build, its very smooth

each time I push the red button for going to home it has to load sense again. Is there a way to solve this?

Thats usually how it is with Hero builds.

[socram2k]

I see. I supposed I was doing something wrong because in the video it doesnt appears

[mfpreach]

Why does it take like 2 minutes to reload sense every time I open a program. Jamazelle's video is running much faster and he has widgets open.
:confused:

[JacenSolo2001]

same here, what should we be changing to match the video's speed?

Why does it take like 2 minutes to reload sense every time I open a program. Jamazelle's video is running much faster and he has widgets open.
:confused:

[jamezelle]

thank you for the build, its very smooth
each time I push the red button for going to home it has to load sense again. Is there a way to solve this?

ive uploaded my hero.user.conf file rename take off the .txt and put it in your conf folder


Trying the new "themed" Hero...... Seems to boot, but could first boot take awhile? Been about 5 minutes, and the screen goes back and forth between "htc" splash and the "hero" splash.....
What do I need to do? Sorry, I am sort of a noob with this.

it sounds like you have the resolution wrong in default.txt
mddi.width=320 mddi.height=480 lcd.density=160

Why does it take like 2 minutes to reload sense every time I open a program. Jamazelle's video is running much faster and he has widgets open.
:confused:

use my hero.conf.user file all should be good remove the .txt place in conf folder

[TheKartus]

ive uploaded my hero.user.conf file rename take off the .txt and put it in your conf folder




it sounds like you have the resolution wrong in default.txt
mddi.width=320 mddi.height=480 lcd.density=160



use my hero.conf.user file all should be good remove the .txt place in conf folder
What in your file makes the homescreen load faster/not need to load?

[jamezelle]

What in your file makes the homescreen load faster/not need to load?

i havent fiddled with compcache swap, so what is in mine is in the basefiles. thats all i can think of.

[muttd]

This is the greatest hero build dialer is smooth sms great job Zen.

[moekind]

does this work with msmissions linux ext2 method?

[jamezelle]

does this work with msmissions linux ext2 method?

yessir....

[moekind]

one last question lol

so the hero.config file goes into the root of the sd card
in a folder named " conf "?

[ali3nfr3ak]

on the home screen push menu then select scenes and select clean slate.

hmmm that still didnt work there are still widgets on the first screen, why are these so hard to remove? This a great build btw be even better if there werent any widgets loaded

[jamezelle]

one last question lol

so the hero.config file goes into the root of the sd card
in a folder named " conf "?

if you dont already have a conf file you are not using the latest basefiles, put in the root of sdcard, only if you dont have the conf folder

[zkush]

does gps work?

[gigermunit]

how long does this take to load because i keep getting cycled through the hero and htc logos.


EDIT:tried running it again and it ran thru the logos than restarted my phone.

[ali3nfr3ak]

make sure your resolution in deafult.txt reads :

mddi.width=320 mddi.height=480 lcd.density=160

[moekind]

lolll last thing
all the menus such as settings are in landscape
how do i put them in portrait

[gigermunit]

make sure your resolution in deafult.txt reads :

mddi.width=320 mddi.height=480 lcd.density=160

mind showing me a quoted example because i think i am editing the default.txt file wrongly.

[socram2k]

mind showing me a quoted example because i think i am editing the default.txt file wrongly.
this is my default.txt

set RAMSIZE 0x07000000
set RAMADDR 0x10000000
set FBDURINGBOOT 0
set MTYPE 1724
set KERNEL zImage
set initrd initrd.gz

set cmdline "board-htckaiser.panel_type=2 ppp.apn=gprs-service.com ppp.username=none ppp.password=1234 board-kaiser-battery.battery_capacity=1800 mddi.width=320 mddi.height=480 lcd.density=160 msm_sdcc.msmsdcc_fmax=20000000 pm.sleep_mode=1 no_console_suspend board-kaiser-keypad.atttilt=1"
boot

[socram2k]

if you dont already have a conf file you are not using the latest basefiles, put in the root of sdcard, only if you dont have the conf folder

thanks for sharing your conf file.

[drewden123]

Anyone having problems sending texts? I sent test txt messages and it says message sending failed. but the message did actually send. just wondering if anyone else had this issue

[gigermunit]

EDIT:fixed it.

[TheKartus]

Anyone having problems sending texts? I sent test txt messages and it says message sending failed. but the message did actually send. just wondering if anyone else had this issue

That is a known issue with hero. You will get that error, but they are sending.

This is the fastest hero build I've used too. Maps and camera just dont want to get their icons moved though.

EDIT: This is the first truly usable Hero build I have tried. Bravo.

[drewden123]

This is my first time trying a hero build. It seems very lagg-ish. Is this because my sd card is class 2?

[gedster314]

I'm still new at this android on the Vogue, I'm so confused. Can someone give me a link to what specific files I need for this to work. The ones I have work but it is dog slow, 20-30 seconds to toggle between apps.

Is there an advantage to running an ext2 partition? Can some point me to where I need to go to get info on this. Creating the partition is no problem but where do I go from there?

[iamthebest235]

just got it on my vogue. works and looks great. but one problem:
there is no audio!!

not when receiving calls, alarms, previewing ringtones, notifications...etc.....none.......no sound at all.....right now the only thing that is keeping me from using this is the sound problem.....

can u please give me suggestions on how to fix that?

thanks for your help in advance

[jamezelle]

zen now i know why you left.................:eek:

[zkush]

sorry to ask again, but is gps working?

[clockworx]

zen now i know why you left.................:eek:

I read here pretty regularly and one day it just suddenly seemed like a flood.....maybe some site linked here? It's starting to annoy me to see "Hero just goes back to the logo over and over again, what do I do!?!?" over and over and over.....and I'm not even a dev. :eek:

[Giggles 312]

ok, maybe i'm just cursed, but i used this build (awesome btw) then i wanted to show my friend how to put ion on the vogue, so i did, now i want to come back here, but now it just keeps looping at the splash screens. yes yes the default.txt is right.

"ppp.nostart=0 mddi.width=320 mddi.height=480 lcd.density=160 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 board-htcvogue.panel_type=1 no_console_suspend"

So um. yeah. :p

~Giggles~
XV6900
Stock ROM
looping at splash screens senseHERO 1.3.3
Hey come check out the great news at Techbrawl.com

[KERKEDAGAIN]

ummm...and caller id??!! it works!!!!!!!

[tallnerd1985]

ok, maybe i'm just cursed, but i used this build (awesome btw) then i wanted to show my friend how to put ion on the vogue, so i did, now i want to come back here, but now it just keeps looping at the splash screens. yes yes the default.txt is right.

"ppp.nostart=0 mddi.width=320 mddi.height=480 lcd.density=160 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 board-htcvogue.panel_type=1 no_console_suspend"

So um. yeah. :p

~Giggles~
XV6900
Stock ROM
looping at splash screens senseHERO 1.3.3
Hey come check out the great news at Techbrawl.com

Tell you the truth Zen, I am having the same issues as this guy right now with my Hero startup.txt. I know my file is correct because it works with previous Hero builds but not this one, it keeps looping at the splash screen. Here are the files I am using at the moment.

-Zimage-10/24/09
-rootfs-10/23/09
-Initrd-08/01/09
-Haret
-Conf(Folder)
-default.txt
-system.sqsh

Now I have tried different variations with the basefiles from 10/09/09 but still no go.

[Giggles 312]

Tell you the truth Zen, I am having the same issues as this guy right now with my Hero startup.txt. I know my file is correct because it works with previous Hero builds but not this one, it keeps looping at the splash screen. Here are the files I am using at the moment.

-Zimage-10/24/09
-rootfs-10/23/09
-Initrd-08/01/09
-Haret
-Conf(Folder)
-default.txt
-system.sqsh

Now I have tried different variations with the basefiles from 10/09/09 but still no go.

now idk if its me or what, but i too had the conf (folder) in the root too but i took it out and it worked. maybe its just the 1st boot that makes it weird. but i realized that the 1st time when i had this build working i didnt have the conf folder. so try it without the folder and see if it works.

[cyburke]

this build looks great and i will have to try it out!

[tallnerd1985]

now idk if its me or what, but i too had the conf (folder) in the root too but i took it out and it worked. maybe its just the 1st boot that makes it weird. but i realized that the 1st time when i had this build working i didnt have the conf folder. so try it without the folder and see if it works.

I just tried that and it was a no go. I am going to see if I can run ADB and get a logcat here in a sec.

[Giggles 312]

I just tried that and it was a no go. I am going to see if I can run ADB and get a logcat here in a sec.

hmm thats weird it worked for me. did you try to reformat your sd card? that helps sometimes too.

[tallnerd1985]

hmm thats weird it worked for me. did you try to reformat your sd card? that helps sometimes too.

Yup, reformatted and everything. I got a logcat made so if anybody can take a look at it, much appreciated.

[jamezelle]

Yup, reformatted and everything. I got a logcat made so if anybody can take a look at it, much appreciated.

yea ill look at it if you post it

[Giggles 312]

well after my mishap, i got it working, and it was slow and laggy, and the sense ui kept rebooting after i end a program.

but i used the hero.user.conf file that jamezelle uploaded and the sense ui is working fine. i still have a hard time removing widgets at the home screen but i think i just need to calibrate the screen. This is prob the BEST hero build out there. Thanks zen! you da best!

~Giggles~
XV6900
Stock Rom
senseHERO 1.3.3
Hey come check out the good news at Techbrawl (http://techbrawl.com)

[tallnerd1985]

yea ill look at it if you post it

Here is my logcat in zip due to XDA's 19.5KB file size limit for .txt files.

[zkush]

may i please get a yes or no on this question: does gps work?

[zenulator]

may i please get a yes or no on this question: does gps work?

yes it's always worked for hero builds.

[KERKEDAGAIN]

what files/folders do i need to add blurnimations to this build?

[jamezelle]

what files/folders do i need to add blurnimations to this build?


of the top of my head
ummm.... /framework/com.htc.resources.apk and framework.res.apk

not sure what all you are trying to change....

edit: you can replace them via adb, push the new frameworks to system/framework MAKE SURE THE FRAMEWORKS ARE NOT ODEXED then do stop start

adb shell ls /system/framework
blah blah blah
adb push whatever/system/framework/com.htc.resources.apk system/framework
adb shell stop
adb shell start

i tried this with the themed lockscreen from my systemv1.sqsh and pushed the frameworks into the ext2 partition over adb did a stop start and voala

EDIT2 all seemed well till i hit the menu button force closes :p better to just build it in then adb push lol

[KERKEDAGAIN]

of the top of my head
ummm.... /framework/com.htc.resources.apk and framework.res.apk

not sure what all you are trying to change....

the transitions and nice bounce of the home screen menu that are in blur builds..

[jamezelle]

the transitions and nice bounce of the home screen menu that are in blur builds..


well you can tear apart jesterblur to see what you can find

the transistions and ''nice bounce'' effect are probably in .xml format or written in java rather than actaul animations

someone correct me if im wrong

[zenulator]

well you can tear apart jesterblur to see what you can find

the transistions and ''nice bounce'' effect are probably in .xml format or written in java rather than actaul animations

someone correct me if im wrong

correct in looking toward the jester blur build. the animations are inside system/framework/framework-res.apk

open the framework-res.apk with an archive manager (don't extract) and move to res/anim inside the archive. replace those files inside res/anim with the ones that are in jesterblur's res/anim make sure you replace exactly whats there and all the file names are the same. it's pretty much drag and drop into the archive. nothing else needs to be done once you drop the other files in. just close the archive manager and push the new framework-res.apk to your build.

[KERKEDAGAIN]

tanks a bunch!! im workin on it now..

[enatefox]

Where have I been? I didn't expect much from this besides normal Hero but you got me interested. Just leaving a mark on this thread. Thanks for the upload

[ali3nfr3ak]

of the top of my head
ummm.... /framework/com.htc.resources.apk and framework.res.apk

not sure what all you are trying to change....

edit: you can replace them via adb, push the new frameworks to system/framework MAKE SURE THE FRAMEWORKS ARE NOT ODEXED then do stop start

adb shell ls /system/framework
blah blah blah
adb push whatever/system/framework/com.htc.resources.apk system/framework
adb shell stop
adb shell start

i tried this with the themed lockscreen from my systemv1.sqsh and pushed the frameworks into the ext2 partition over adb did a stop start and voala

EDIT2 all seemed well till i hit the menu button force closes :p better to just build it in then adb push lol

what is ODEXED?

[KERKEDAGAIN]

worked like a SHARRRM!! gratzi

[stoked]

Here is my logcat in zip due to XDA's 19.5KB file size limit for .txt files.

Any luck? I get the same thing, keeps cycling between Hero and HTC logos. Got the right specs in default.txt.

[enatefox]

jamezelle, you probably need to reboot or kill vold, servicemanager, etc. before running "start" again. dmesg is probably throwing "refusing to reopen dex file.. collecting certs" endlessly. A reboot usually works if you have patience though.

[pmos69]

now idk if its me or what, but i too had the conf (folder) in the root too but i took it out and it worked. maybe its just the 1st boot that makes it weird. but i realized that the 1st time when i had this build working i didnt have the conf folder. so try it without the folder and see if it works.

If you don't have a conf file, it will use the default settings for every option.

[tallnerd1985]

Any luck? I get the same thing, keeps cycling between Hero and HTC logos. Got the right specs in default.txt.

IDK, I went to another Hero image because I couldn't get the one posted to work.

[enatefox]

Same here but I used ADB and killed the SetupWizard process and hit the home button and it loaded right up. No problems with it since. This is definately a noteworthy build. Got the blurry effects and some other goodies already.

[casualonejp]

I know this is no priority and that I shouldn't get special attention but....I am unable to use dropbox.com from my work computer. Is there any possibility of having it downloadable elsewhere? mediafire works fine for me.:rolleyes:

Thanks!

[trojanv]

hey cud sum1 plz give me all the files they used to get the hero build working. i thought i had the write files but one after another i keep running into road blocks. i havent done this in a while either. i got my xRom hero running but i cant cant this white to work.

it boots up and when it gets to this one part where it says it cant access the ttyl job sumthing. it just stays there. or am i suppose to just wait for it to finish.

earlier i just had a blank white screen after starting up haret.

[mattcoz]

Anyone else having trouble making and receiving calls? When I make a call I don't hear anything, but the call does go through. When I receive a call I get one short ring and then nothing, and it ends. :confused:

[polyrhythmic]

IMHO SD cards are not the ideal place to keep an OS and I strongly suspect that the data gets corrupted on a regular basis. The FAT32 partition seems to have the most problems... at one point I had to reformat my card several times and could only get it to work by formatting in Vista. Point being, if it doesn't work the first time, try try again, and try a reformat too. Installing this build using the ext2 partition method, it took me 3 times before I could get a functional installation. However, I'm happy we use the SD card rather than flashing a ROM every time.

Now that I have it up and running, AWESOME! This build is speedy and gorgeous. Plenty of useful apps :D I have it installed on an ext2 partition with no compcache and a 192MB (overkill, I know) linux swap partition. I know my Kaiser is unsupported so if any Kaiser owners have questions about this build go start a thread in the Kaiser forum please. Thanks again guys!

[ruizit0]

its nice but to slow to use on regular day :\
after this ill give up definitively from hero :(
damn

[drewden123]

its nice but to slow to use on regular day :\
after this ill give up definitively from hero :(
damn

are you running from ext2 partition? I wasn't and i thought it was a little too slow but after I did the partition it is completely usable. Just about as fast as WM6.5 on a given day. I strongly recommend trying running from a partition if you haven't already.

[Giggles 312]

are you running from ext2 partition? I wasn't and i thought it was a little too slow but after I did the partition it is completely usable. Just about as fast as WM6.5 on a given day. I strongly recommend trying running from a partition if you haven't already.

now your serious right?! when i use this i sometimes think that its slow (cause it kinda is) but its faster than any other Hero build i've used. so if i run it from ext2 partition this build will basicly run similarly as smooth as a wm6.5 ROM? Imma gonna give it a shot and keep ya posted.

LETS HOPE IT WORKS

~Giggles~
XV6900
Stock Rom (never use)
senseHERO 1.3.3
Hey come check the great news at Techbrawl (http://techbrawl.com)

[silex]

I must be doing something wrong, because bluetooth and gps does not work on this build for me.

[TheKartus]

I must be doing something wrong, because bluetooth and gps does not work on this build for me.

Bluetooth does not work with any Android build. I think GPS should work with Hero builds though....

[silex]

Bluetooth does not work with any Android build. I think GPS should work with Hero builds though....
I was able to get bluetooth working on a cupcake ion build before by going into Wireless Settings -> Bluetooth and turning it on within the menu instead of using the option one level up. I agree that GPS should work so not sure why it doesn't for me.

[drewden123]

now your serious right?! when i use this i sometimes think that its slow (cause it kinda is) but its faster than any other Hero build i've used. so if i run it from ext2 partition this build will basicly run similarly as smooth as a wm6.5 ROM? Imma gonna give it a shot and keep ya posted.

LETS HOPE IT WORKS


Indeed. I was at the point of not being able to use hero on a regular basis because it would come to a crawl with certain applications, but now running from the partition makes it fully functional for me, so much that I wish it was just a rom on my phone so i could always be on hero.

[ruizit0]

Indeed. I was at the point of not being able to use hero on a regular basis because it would come to a crawl with certain applications, but now running from the partition makes it fully functional for me, so much that I wish it was just a rom on my phone so i could always be on hero.

fast like last donut 1.6 ? or for example when you press call button you have to wait 3~5 seconds to appear the last calls list ?

[drewden123]

fast like last donut 1.6 ? or for example when you press call button you have to wait 3~5 seconds to appear the last calls list ?

Very close to last donut when sense ui is enabled, if you disable sense ui it is as fast as donut. Haven't taken note, but i'd gues 1 or 2 seconds absolute MAX wait time for dialer

[TheKartus]

fast like last donut 1.6 ? or for example when you press call button you have to wait 3~5 seconds to appear the last calls list ?

Fast like usable compared to previous hero builds. Does not run like Donut or Ion. But its much closer and better.

[Giggles 312]

so im trying to boot this build with the ext2 thingy. i got everything setup and when it boots it goes through all of the mumbo-jumbo texty lingo, but once it gets to the android loading part it gets stuck in a loop, and the error reads ..

"ERROR: CANNOT LINE EXECUTABLE 's/system/bin/sh'

any help?

[drewden123]

so im trying to boot this build with the ext2 thingy. i got everything setup and when it boots it goes through all of the mumbo-jumbo texty lingo, but once it gets to the android loading part it gets stuck in a loop, and the error reads ..

"ERROR: CANNOT LINE EXECUTABLE 's/system/bin/sh'

any help?

hmm...i'm sure there's a guide somewhere but here's what i did step-by-step (note: this is probably outdated now with the new rootfs, etc. but this works great for me).
1. Boot a decent distro of linux
2. Mount your SD card
3. Add a 200mb ext2 partition
4. Download & extract recoverfiles2.2.rar from vogue-android site
5. Copy all of the files from the folder recoverfiles2.2 to the root of SD card (note: overwrites rootfs.img, initrd.gz, and adds recover.img)
6. Boot haret.exe from WM
7.PAY CLOSE ATTENTION to the text on the screen, it will prompt for the recovery installation something or other, and you MUST press a key to proceed with recovery. The time for this prompt is short, so keep close attention.
8. It will load the recovery.img, backup your old data.img under sd/systembackup (or something like that), create a new data.img, then proceed with boot as if it were your first time installing android (the process took up to 10 min for me, so don't panic).
9. Once android is all loaded and what not, you can explore to your sd card and find the systembackup folder with the data.img (the filename will be "date backed up".img, ie: 11-16-2009.img)
10. Rename this to data.img, then copy it back to the root of SD to overwrite the new one. You will now have all your progs, contacts, etc. back.

These steps worked perfectly for me, so if something goes wrong I don't know what to tell you because I'm not so savvy with the android scene :/. If your phone screws up, i'm not liable (i think i have to say that?). Hope this works out for you!

[Giggles 312]

hmm...i'm sure there's a guide somewhere but here's what i did step-by-step (note: this is probably outdated now with the new rootfs, etc. but this works great for me).
1. Boot a decent distro of linux
2. Mount your SD card
3. Add a 200mb ext2 partition
4. Download & extract recoverfiles2.2.rar from vogue-android site
5. Copy all of the files from the folder recoverfiles2.2 to the root of SD card (note: overwrites rootfs.img, initrd.gz, and adds recover.img)
6. Boot haret.exe from WM
7.PAY CLOSE ATTENTION to the text on the screen, it will prompt for the recovery installation something or other, and you MUST press a key to proceed with recovery. The time for this prompt is short, so keep close attention.
8. It will load the recovery.img, backup your old data.img under sd/systembackup (or something like that), create a new data.img, then proceed with boot as if it were your first time installing android (the process took up to 10 min for me, so don't panic).
9. Once android is all loaded and what not, you can explore to your sd card and find the systembackup folder with the data.img (the filename will be "date backed up".img, ie: 11-16-2009.img)
10. Rename this to data.img, then copy it back to the root of SD to overwrite the new one. You will now have all your progs, contacts, etc. back.

These steps worked perfectly for me, so if something goes wrong I don't know what to tell you because I'm not so savvy with the android scene :/. If your phone screws up, i'm not liable (i think i have to say that?). Hope this works out for you!

alrighty. im doin this now, but a quick random question, does the ext2 partition HAVE to be 200mb? or can it be bigger?

[zkush]

any luck deleting widgets?

[drewden123]

alrighty. im doin this now, but a quick random question, does the ext2 partition HAVE to be 200mb? or can it be bigger?

I'm sure it could be bigger, but, correct me if i'm wrong, i think the partition is for system processes, etc., and the rest of the SD is still used for data storage. so i don't think it would help any to enlarge the partition size

[clockworx]

any luck deleting widgets?

I've gotten a little better at deleting widgets, but it takes some practice. I make a small continuous circle rather than keeping the pointer completely still, and when the vibration feedback kicks in I start dragging. Kind of annoying, but I'm getting better at it and it's not like I'm constantly deleting widgets anyways, it was just for the initial setup.

Maybe this is somehow related to resolution and the density of the touchscreen? Not really sure...

[ali3nfr3ak]

I've gotten a little better at deleting widgets, but it takes some practice. I make a small continuous circle rather than keeping the pointer completely still, and when the vibration feedback kicks in I start dragging. Kind of annoying, but I'm getting better at it and it's not like I'm constantly deleting widgets anyways, it was just for the initial setup.

Maybe this is somehow related to resolution and the density of the touchscreen? Not really sure...

i take a different approach, first thing i do is go to settings/personalize/scenes and change to the clean slate which only has 5 widgets on the center window , i use my thumb and try and get as much of it pressed onto the widget i want to remove ( keeping in mind that if i slighty raise my finger the widget will open 0 if it doesnt work after a couple of goes i switch windows then go back and almost everytime after switching windows it seems to work , what we need to find out is where the widget information is kept and remove it from the rom b4 we run it on our phones

[mattcoz]

I've gotten a little better at deleting widgets, but it takes some practice. I make a small continuous circle rather than keeping the pointer completely still, and when the vibration feedback kicks in I start dragging. Kind of annoying, but I'm getting better at it and it's not like I'm constantly deleting widgets anyways, it was just for the initial setup.

Maybe this is somehow related to resolution and the density of the touchscreen? Not really sure...

The circle technique works for me, and as soon as I removed everything I made sure to save it.

[KERKEDAGAIN]

i've found that tapping at the top of whatever widget you're trying to remove and dragging as soon as the vibrate happens, works pretty well..

[Giggles 312]

i've found that tapping at the top of whatever widget you're trying to remove and dragging as soon as the vibrate happens, works pretty well..

i agree. that worked for me all the time. but now im still haveing a prob with ext2 booting.

i downloaded the latest basefiles. (20091116) and i have 3 partions. 1 is fat32 and the other 2 are ext2. and i load the backup and follow the promts on screen, but i still cant seem to get it workin. hmm. gonna try jjust wipeing the card and repartion it and basicly start anew.

** EDIT ** everything is working now, except when booting the build. i get "android_power: wakeup (0->0)" error. what in the world is that all about?

[sshark]

Can someone pl port this ROM for vogue, this looks promising and has full exchange support!

http://forum.xda-developers.com/showthread.php?t=575501

[clockworx]

Doesn't SenseHero have full exchange support?

[jamezelle]

Can someone pl port this ROM for vogue, this looks promising and has full exchange support!

http://forum.xda-developers.com/showthread.php?t=575501

that is the ugliest woodgrain theme EVER!

[sshark]

that is the ugliest woodgrain theme EVER!

Yep that's true, but I am hoping I will get better radio than Hero and full exchange support - this being a magic build, hence the request :)

Doesn't SenseHero have full exchange support?

Yep, but Hero is little lag compared to Roger's magic build...

[jamezelle]

Yep that's true, but I am hoping I will get better radio than Hero and full exchange support - this being a magic build, hence the request :)



Yep, but Hero is little lag compared to Roger's magic build...

ill look into retheming it lol

[pcpgeek]

con someone please port this rom. It looks really nice.
http://forum.xda-developers.com/showthread.php?t=573209

[polyrhythmic]

Wtf you guys stop hijacking this thread with port requests

[sshark]

stop showing up in vogue forums.

we have good ecosystem here with mods try to be nice with other people. :)

[zkush]

got the widgets deleted with the circle trick. its awesome. just cant get rid of the clock. i want to get the analog one. anyone have any suggestions?

[pcpgeek]

im sorry for cluttering this thread with port requests. but i am very thankful for the work you are doing:)

[drewden123]

got the widgets deleted with the circle trick. its awesome. just cant get rid of the clock. i want to get the analog one. anyone have any suggestions?

At the home screen, press menu button, then press "Scenes," then choose "Clean Slate." This will place the analog clock on the home screen.

[jamezelle]

ive been running other builds and now im back to this. man i gotta say this is as fast as hero is gonna get!!


im serious we are running this as fast as they(G1/MT3G) are :)

[intimidatorx31]

got the widgets deleted with the circle trick. its awesome. just cant get rid of the clock. i want to get the analog one. anyone have any suggestions?

I was able to remove the clock widget by

Pressing and holding the clock widget
As soon as it vibrates
Swipe the clock down

Its tricky and it must be done with precision timing.

[clockworx]

ive been running other builds and now im back to this. man i gotta say this is as fast as hero is gonna get!!


im serious we are running this as fast as they(G1/MT3G) are :)

Yeah but now I want NAV :(

I was hacking away at the SDK, backporting enough features to get NAV to start up (finally), but I think I would end up hitting a wall once I got to TTS.

Most of the things I backported were related to density/rendering, unsurprisingly.

[amad99]

is it normal for the the htc sense home screen to load everytime after you go back?
Ex. went to browser, closed it and the "loading" circle is re-loading sense again.

Thanks

[mssmison]

Seriously you guys stop making requests for Roms. Do it yourself, it's stupid easy now, you don't even need to download the sdk any more, just get genext2fs from here on xda and do it.

[brunes]

My camera doesn't seem to work using this build, with what I think is the latest kernel from GoogleCode.

What kernel are people using with this build?

This is my only gripe, other than that this build is ROCKING fast.

[wentzeric]

Never fails, on all the Hero builds Including this one

it never gets past the loading animations. . . just keeps looping.

Im running a Vogue 6900 branded Verizon.

any help!!!!

[jamezelle]

Never fails, on all the Hero builds Including this one

it never gets past the loading animations. . . just keeps looping.

Im running a Vogue 6900 branded Verizon.

any help!!!!

sounds like your resolution isnt set right in default txt file

set cmdline "ppp.nostart=0 mddi.width=320 mddi.height=480 lcd.density=160 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 board-htcvogue.panel_type=1 no_console_suspend"

[anotherhawkeye]

This is my only gripe, other than that this build is ROCKING fast.

Need some help with the speed. This build is quite slow for me. I have a class 4 SD card with ext2 partitions. I'm also using the hero.conf file by
jamezelle. Most of the actions take atleast 5 seconds (upto 20 to 30 seconds some times). What more can I do to make the build faster ? TIA.

[KenNashua]

Ugh. Love the UI, but can't delete any widgets. As soon as I press and hold, the phone vibrates and then the option to remove disappears.

Scratch that. Took about 20 tries, but when I switched to finger mode, I finally got it (was using the stylus).

[KenNashua]

My camera doesn't seem to work using this build, with what I think is the latest kernel from GoogleCode.

What kernel are people using with this build?



Same issue here. 11/16 basefiles.

[jamezelle]

Same issue here. 11/16 basefiles.

try pro-paint camera or fxcamera from the market it should work

[TheKartus]

Does it count as a random rom request if I suggest someone port version 1.4? :)

[thoughtlesskyle]

has anyone tried flashing this rom yet?

[Shidell]

has anyone tried flashing this rom yet?

I have, I'm running it now.

It's the first ROM I flashed so I have nothing to compare it to--but everything is working, it's pretty quick, and it's pretty. It's really nice having a mobile OS that has drivers for all of your hardware (*cough*GPU*cough*). YouTube was a whole new experience.

My biggest problem? The buttons config is all goofy. Power to menu, End to power, no "back" button.. etc.

[jamezelle]

I have, I'm running it now.

It's the first ROM I flashed so I have nothing to compare it to--but everything is working, it's pretty quick, and it's pretty. It's really nice having a mobile OS that has drivers for all of your hardware (*cough*GPU*cough*). YouTube was a whole new experience.

My biggest problem? The buttons config is all goofy. Power to menu, End to power, no "back" button.. etc.

we have to clarify now whether you flashed it or loaded it on the sdcard

camera is back button btw

[thoughtlesskyle]

I have, I'm running it now.

It's the first ROM I flashed so I have nothing to compare it to--but everything is working, it's pretty quick, and it's pretty. It's really nice having a mobile OS that has drivers for all of your hardware (*cough*GPU*cough*). YouTube was a whole new experience.

My biggest problem? The buttons config is all goofy. Power to menu, End to power, no "back" button.. etc.

back button is your camera button usually

[Shidell]

we have to clarify now whether you flashed it or loaded it on the sdcard

camera is back button btw

My bad--I flashed plemen's AOSP build and posted in this thread rather than the correct one.

back button is your camera button usually

Yeah.. unfortunately my camera button is dead. :) lol.

[thoughtlesskyle]

you could always use the old Zimage with the old keymap, the camera button doesnt really do anything now since they got rid of the blue keyboard, and then vol up becomes back and vol down becomes menu, you would have to turn volume up through the menu though since cam button plus vol rocker is volume

[KenNashua]

Ugh. Love the UI, but can't delete any widgets. As soon as I press and hold, the phone vibrates and then the option to remove disappears.

Scratch that. Took about 20 tries, but when I switched to finger mode, I finally got it (was using the stylus).

This is still incredibly painful. Anyone have any tips? Is it the vibrate that causes the problem? Any way to turn it off? It's literally taken me 20 minutes to clear widgets from a screen to free up space to customize.

[zenulator]

This is still incredibly painful. Anyone have any tips? Is it the vibrate that causes the problem? Any way to turn it off? It's literally taken me 20 minutes to clear widgets from a screen to free up space to customize.

On the home screen press menu then scenes then chose clean slate. That should clear all the widgets and give you a "clean slate" to work with.

[TheKartus]

On the home screen press menu then scenes then chose clean slate. That should clear all the widgets and give you a "clean slate" to work with.

It keeps a clock and four icons. The key is to slowly rotate your finger in like a small circle when you hold, and then drag right after you feel the vibrate. Takes some practice but once you get the hang of it its fairly easy.

[nbpanjwa]

Noticed v1.4 update
http://forum.xda-developers.com/showthread.php?t=574526

Will it be coming to Vogue any time soon?

[BadAppleDH]

ok, ive used a few android builds before, but this is the first hero build ive used..
im on a sprint vogue
using the base files from http://code.google.com/p/vogue-android
im using the rootfs from http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
the sprint hero data file from android-dmhz's Shared Files on MediaFire
my default.txt is:

set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz

set cmdline "ppp.username= ppp.password= mddi.width=320 mddi.height=480 lcd.density=160 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 board-htcvogue.panel_type=3 no_console_suspend"
boot


I do not have my card partitioned.

im getting to the splash screens and they are just cycling over and over.. hero, htc, hero, htc... Ive tried using both the themed and standard builds from this thread, both with the same results.
Any ideas where ive gone wrong?

[160bpm]

im getting to the splash screens and they are just cycling over and over.. hero, htc, hero, htc... Ive tried using both the themed and standard builds from this thread, both with the same results.
Any ideas where ive gone wrong?

Resolution problem: If i'm right try: mddi.width=320 mddi.height=428

without lcd.density=160

[BadAppleDH]

Resolution problem: If i'm right try: mddi.width=320 mddi.height=428

without lcd.density=160

Nope, no dice, same problem..

[thoughtlesskyle]

Resolution problem: If i'm right try: mddi.width=320 mddi.height=428

without lcd.density=160

hero builds are 320 x 480

[BadAppleDH]

hero builds are 320 x 480

Thats what i did originally. I also tried both with and without lcd density setting in..

[zenulator]

Thats what i did originally. I also tried both with and without lcd density setting in..

are you running the dzo's nand rom?

[scramiro]

Hi,

i've tried both roms but it is quite slow.
I have a polaris.
the question: is better getting partition orsd class 6 for get it faster?
is there any tutorial to get partition on a sd card? thanks a lot for your work.

[manifest3r]

Hi,

i've tried both roms but it is quite slow.
I have a polaris.
the question: is better getting partition orsd class 6 for get it faster?
is there any tutorial to get partition on a sd card? thanks a lot for your work.

Do you mean the ext2 partition? It's fairly easy if you have linux. I used Paragon Partition Manager and it ended up erasing my RAID drives (I followed all the steps), so I just got linux and it worked like a charm :)

But the part im stuck in is how to boot haret from the ext2 partition, or is it that you can only save apps on the ext2?

[kiwilime]

For some odd reason, I just switched from the default Hero build to this one, and now I don't get any service, and the camera force-closes every time I try to open it. Can someone help?

I'm using an XV6900, I don't see why this is happening since zenulator is using it too!

[jamezelle]

For some odd reason, I just switched from the default Hero build to this one, and now I don't get any service, and the camera force-closes every time I try to open it. Can someone help?

I'm using an XV6900, I don't see why this is happening since zenulator is using it too!

dont know about your service issues but use fxcamera from the market the camera app in the menu doesnt work, neither does camcorder

[kiwilime]

I dont know what was wrong with my service, but I soft-reset and rebooted into android and its all fixed now.

And now I can use my camera again :)

Thanks jamezelle

[BadAppleDH]

are you running the dzo's nand rom?

No im not. But if your referring to the rootfs i am using, i have tried the rootfs with the basefile package from http://code.google.com/p/vogue-android although i see it was just moved today. Ill try the files that have been moved to sourceforge after i get done typing this and post my results, but they look like they are the same, just moved.

My goal was, if i was happy with this build (i understand that some people are having problems with text messages) i was going to move on to dzos nand rom next, as i no longer use wm anyway. That is why i was using that rootfs. I was mostly just trying to get as close to what i would need for dzos rom so i could be sure i didn't have any trouble before i go flashing.. But maybe that was what was causing my trouble, but as i said, ive tried (your?) basefiles also without any differences. Am i not supposed to be using that sprint hero data img when i use this build (first time on a hero build)?

I have been on a rogers build and am fairly happy with it as far as daily use, i don't use android (or my phone for that matter) as any sort of business tool, so I am generally happy about how far android ports have come (as far as usability goes) for just the average geek using it for mostly phone and text. But i wanted to try out dzos rom because it would be nice not to have to reboot into wm first every time i have to restart my phone (also i am hoping for a bit of speed increse).

Is there a way that i can use some program to dump what my terminal says to my computer? im using an ubuntu box, but i also have a xp one i could use.. The text is too small and goes by too fast to really see or to accurately retype what is going on. I could do something like that if anyone is willing to look at what it says or if you even think that it might show what my problem could be. Apparently everyone is sure that the splash screen infinite cycle is a resolution problem, but changing it hasn't done anything for me.

Thanks for all your work, and for taking the time to help.. Sorry i just gave you a novel to read (i have a bad habit of doing that). Its just that short posts like "it don't work!" I find does not help anyone (especially the poster).

[cccpms6]

Could I get some help here, I'm running one of the hero builds, or actually I'm trying to run. I am able run the linux screen but it gets stuck after the whole program runs through. The last lines are something about the volume being set 3 of 5 or something like that, After that my phone screen goes blank and nothing loads, I've waited a long time but nothing happens. Any tips or help? Thanks

[ern88]

How do I get these programs to work on my Vogue? I haven't used an android program before Thanks

[alltellmobile]

has anyone had any luck flashing this to their nand
because it wouldnt work for me and neither with just haret
runnin windows mobile 6.5

[zenulator]

has anyone had any luck flashing this to their nand
because it wouldnt work for me and neither with just haret
runnin windows mobile 6.5

http://forum.xda-developers.com/showpost.php?p=4276193&postcount=1

yes it will run from nand with some modification.

[synaptyc]

The firmware version shows 1.5
Is that accurate?
I am trying to install the Home++ app, but it tells me it can't be installed on this device.
Home++ only works with 1.6 & 2.0

Also.... is there a way to use the contacts mgr + dialer from this build on a 1.6 or 2.0 build... or is that a SenseUI thing? I love all the features in this contacts mgr.

Any help?

[ryomahino]

Hi guys is my first time with this, sorry for the inconvenience.
Where in the sd card I must put my music and my wallpapers to use in this build?
Thanks in advance

[BadAppleDH]

Ok, i got this to run, finally, using all the base files from zen-hero-090809.zip
When i try to use the base files from http://code.google.com/p/vogue-android (now mediafire) it tells me it cant find the system.img

I got it to work with the rootfs from zen-hero-090809.zip (ive also used the rest of those files from that zip) but either way i do it, it doesnt stay running very long or very well (freezes, reboots, and is generally slow)

Am i supposed to have my card partitioned when using the base files from basefiles-20091116.zip? is that why it is not finding my system.img?

Edit: i partitioned my card, and then thought, hmm, maybe i should be keeping all these basefiles in the android folder instead of the root like i had been doing with other builds.. BINGO!!
Now i feel kind of stupid..
Also, with my posts from a few days ago, i must have dorked up my default.txt somehow, because after i used the one included in zen-hero-090809 it booted ok.. I did notice that it didnt have an lcd density setting, is that ok? doesnt seem to be causing me any problems that i can tell, but obviously, what do i know?

[zkush]

i have an 8gb kingston micro sd. how should i partition it? like what size ext2 and fat32 and all that?

[BadAppleDH]

i have an 8gb kingston micro sd. how should i partition it? like what size ext2 and fat32 and all that?

Someone may want to correct me on this, but i read in a post that 256MB for two ext2 partitions, and the rest fat32, it also said to do fat32 at the beginning and put the two ext2s at the end.. Its what i did, and all seems well..

Zen (or whoever else i guess): i was just wondering about the text message not delivered problems with this new hero build, is it anything that is going to be fixed, (im not implying i want you to do it or anything pushy, you just know more than I.) because it seems to be the only reason i might wait to try doing this whole flashing to nand thing, but if it looks like its something that might be resolved in the next hero build or something, then ill just wait. but if its something that were going to be stuck with for a while, then ill either flash it, or decide to go back to an ion build (but i am liking this sense hero build).

Is there maybe a temporary work around for the text message bug? maybe just a way to get it to not pop up a notification on my top bar everytime?

[xcheljd]

Can somebody with a correct default.txt show me what it has. because im confused on how to set it up. I have the sprint htc touch.
I know it is cdma so are there any additional things i need to put into the default.txt for data and all that good stuff to work?

[zenulator]

Can somebody with a correct default.txt show me what it has. because im confused on how to set it up. I have the sprint htc touch.
I know it is cdma so are there any additional things i need to put into the default.txt for data and all that good stuff to work?

mostly the panel type and resolution. check the top of the thread. i'm on verizon. but jamezelle might be able to help/

[KenNashua]

I have some custom ringtones assigned to different people, however when the calls come in, caller ID recognizes them but I just get generic beeping instead of the custom ring tones. Anything I'm missing in configuration?

[bblount]

ok, ive used a few android builds before, but this is the first hero build ive used..
im on a sprint vogue
using the base files from http://code.google.com/p/vogue-android
im using the rootfs from http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
the sprint hero data file from android-dmhz's Shared Files on MediaFire
my default.txt is:

set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz

set cmdline "ppp.username= ppp.password= mddi.width=320 mddi.height=480 lcd.density=160 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 board-htcvogue.panel_type=3 no_console_suspend"
boot


I do not have my card partitioned.

im getting to the splash screens and they are just cycling over and over.. hero, htc, hero, htc... Ive tried using both the themed and standard builds from this thread, both with the same results.
Any ideas where ive gone wrong?

I am having the same problem can someone help. I have changed the res. as well and no help. What is causing this other builds work fine.

[zenulator]

I am having the same problem can someone help. I have changed the res. as well and no help. What is causing this other builds work fine.

don't use the sprint hero data.img and stick with the rootfs.img from vogue-android which is now at sourceforge.

[BadAppleDH]

I am having the same problem can someone help. I have changed the res. as well and no help. What is causing this other builds work fine.

don't use the sprint hero data.img and stick with the rootfs.img from vogue-android which is now at sourceforge.

i also used the default from zen-hero-090809 and the rest of my files are the base from sourceforge. didnt try that default. didnt want to break what was fixed. If you use it i would suggest adding in lcd.density=160 although i believe i read somewhere it will default to that, i never put it in and it seems fine. Here, ill try and see if anything blows up....... Works Fine.
Make sure you put these base files in the android folder like they are zipped.

[ritzky]

i had a problem, every text message i sent says that its not delivered, when it actually sends just fine. any thought?

[sshark]

i had a problem, every text message i sent says that its not delivered, when it actually sends just fine. any thought?


Instead of using stock SMS app, use something like Handcent and turn off delivery reports.

[ryomahino]

How you guys can play mp3 or view images in this build? I tried, but always say no media in sdcard.

[scottter]

How do i connect this to my computer, even with adb2, it says installation failed win7x64

[polyrhythmic]

How do i connect this to my computer, even with adb2, it says installation failed win7x64

Use the Search button and you'll find the answer.

[sshark]

How do i connect this to my computer, even with adb2, it says installation failed win7x64

Actually, use ADB (not ADB2) drivers that are on DZO's website, which have worked for me seamlessly. I assume that you know how to install drivers, or drop a line, and I will walk you through on how to install them on Windows.

[refthemc]

So I got the Droid Eris this past friday and I gotta say that I love it. I thought I knew Hero from running it on the vogue but man was I way wrong, this thing is so snappy its ridiculous, I keep thinking that my phone is gonna get slow from running so many widgets but it doesnt......I am actually really impressed with this old 528 processor but then Im gonna be jealous when that Passion is released...

[bradsinram]

How do I transfer contacts from wm

[jamezelle]

So I got the Droid Eris this past friday and I gotta say that I love it. I thought I knew Hero from running it on the vogue but man was I way wrong, this thing is so snappy its ridiculous, I keep thinking that my phone is gonna get slow from running so many widgets but it doesnt......I am actually really impressed with this old 528 processor but then Im gonna be jealous when that Passion is released...

yeah i think im gonnna end up waiting on the passion!!!:D

[mrkite38]

How do i connect this to my computer, even with adb2, it says installation failed win7x64

try this (http://forum.xda-developers.com/showpost.php?p=5096501&postcount=17)

[xcheljd]

i get passed the boot screens but then i can't see a wallpaper or the widgets. Also, the menu doesn't drag down.
any suggestions?

[zenulator]

i get passed the boot screens but then i can't see a wallpaper or the widgets. Also, the menu doesn't drag down.
any suggestions?

just wait....it's loading

[bradsinram]

running non-themed canot get data working can i get some help
by the way im on verizon network

[Newbie16]

I'm having issues with this build, does anyone have a terminal apk file i can install so i can trouble shoot it?

[desiindc]

don't use the sprint hero data.img and stick with the rootfs.img from vogue-android which is now at sourceforge.Can someone point me to the rootfs.img at sourcefourge? The downloads link on this page (http://sourceforge.net/apps/trac/androidhtc/wiki/WikiStart)seems to only have the files to flash android.

[jamezelle]

any people still running this should try this hero.user.conf (http://dl.dropbox.com/u/3053071/hero.user.conf) you wont be sorry:D

[desiindc]

any people still running this should try this hero.user.conf (http://dl.dropbox.com/u/3053071/hero.user.conf) you wont be sorry:D
Thanks. I think that and renaming the data.img helped to boot up. I am unable to get out of google maps. Does anyone have this problem? Is there a task manager in this?

[Newbie16]

any people still running this should try this hero.user.conf (http://dl.dropbox.com/u/3053071/hero.user.conf) you wont be sorry:D

I get a Dropbox - 404 page, can you upload it again?

[jamezelle]

I get a Dropbox - 404 page, can you upload it again?

yeah they suspended my links(too much bandwidth haha):rolleyes: here you go (http://www.4shared.com/file/177126861/b7459a75/herouser.html):D enjoy!!!

[srgudhka]

would it work on elfin.

[Arrow88]

The RoM look very GOOD! But i can't install in my phone(HTC Kaiser)！I want to boot from SD not NAND! Who can tell me how to install in SD? I have installed Cupcake and Dount, there are no problem. I down basefile from andoridonhtc.com(basefiles-20091116) and put system.sqsh in /sdcd!! Soory for my poor English!

[zenulator]

The RoM look very GOOD! But i can't install in my phone(HTC Kaiser)！I want to boot from SD not NAND! Who can tell me how to install in SD? I have installed Cupcake and Dount, there are no problem. I down basefile from andoridonhtc.com(basefiles-20091116) and put system.sqsh in /sdcd!! Soory for my poor English!
This build is for the sdcard. It doesn't fit on nand. If you need basic android help there are other threads for that. Plus this is an older release. The new 1.4 is faster so use that.