Stuck on WM load and can't flash.

[Magnus23]

Hi all,
i have a problem with one device here - Orbit II.
It is stuck on booting WM with volume controls on the screen. Usually it's not a big deal and can be solver with HR or by flashing a new rom, but the problem is that i cannot get it to do a HR: white screen with warning appears but when i press send buttong(the green one) - nothing happens, it doesn't react at all.
Ok, i was thinking to flash it, but another problem appeared: i can't enter bootloader(2 softbuttons+reset), same procedure works fine on my own device but this one just reboots and no bootloader...

I'm kinda out of options now.
Any help is appreciated.

[cormacart]

Ok, i was thinking to flash it, but another problem appeared: i can't enter bootloader(2 softbuttons+reset), same procedure works fine on my own device but this one just reboots and no bootloader...

I'm kinda out of options now.
Any help is appreciated.
press & hold camera button and make soft reset...

[Magnus23]

Thank you for the answer but i as said in first post, i have tried this, the white screen with the warning appears but pressing Send button does nothing, device does not react to this, so hard reset doesn't happen.

If someone could point to me any other way to enter bootloader - i can work my way from there.

I have also tried MTTY but USB connection doesn't appear in the list(yes, i have killed the activesync processes).

[chris10230]

which screen

1st,
2nd, radio protocol version
3rd gif splash
4th wimo load screen

And also what rom have you got on atm.

[Magnus23]

It is stuck on 4th wimo load screen.

I have no idea about the actual WN version as it's not my device, but i assume it's the original O2 rom since there is still O2 splash screen.

[chris10230]

It is stuck on 4th wimo load screen.

I have no idea about the actual WN version as it's not my device, but i assume it's the original O2 rom since there is still O2 splash screen.

o well then i take its not hard-spl'd in which case i really do not get it, i have got into bootloader at the radio version screen so i dont get this one?? Is it still covered by o2 warrenty, it is 2 yrs long so best bet go to them and see what they say...

Thats if it has no hard-spl... If not take the battery out for a day and see if that brings it back to life, stranger things have happened seen that solve quite a few problems.

[Magnus23]

Well, device is not mine, a friend asked to look at it. I don't think he got a warranty left.

Well, the thing is, its not a big deal realy, it's not bricked or anything, i just need to get into bootloader, from there i can flash hardspl and the rest from SD... i just haven't seen this thing before... unable to enter the bootloader.

[Magnus23]

Is there any way to force the device to enter bootloader? I mean other than the standart procedures of Camera+reset?

I think i've seen somewhere a CustomRUU that could do that, even with incomplete WM boot. Like send some commands to the device to enter bootloader.

Does anyone know anything like this?