White Screen Of Death

[Vieira]

Hello.
For some reason HardSPL does not work in my device (I patch it but I still see SPL 2.0.20.bla instead of G4) so in the past I used dioxda2 LazyTool to update to 6.5 and it worked fine after some tries.

However today I tried my luck updating to 6.5.1 23506 from bikertibi first using his tool but after seeing that it still doesn't work (aka doesn't patch spl) I tried using LazyTools. But it doesn't work: it always get stuck in the white screen (pda) and never leaves 0% (in computer screen). After some time a connection error is detected. Tried a lot of times without success.

Device is Prophet G4 branded as Qtek S200 and is running wm5 (installed after last update leave me in three-color boot screen).

Any idea?

Thanks in advance.

[dioxda2]

Hello.
For some reason HardSPL does not work in my device (I patch it but I still see SPL 2.0.20.bla instead of G4) so in the past I used dioxda2 LazyTool to update to 6.5 and it worked fine after some tries.

However today I tried my luck updating to 6.5.1 23506 from bikertibi first using his tool but after seeing that it still doesn't work (aka doesn't patch spl) I tried using LazyTools. But it doesn't work: it always get stuck in the white screen (pda) and never leaves 0% (in computer screen). After some time a connection error is detected. Tried a lot of times without success.

Device is Prophet G4 branded as Qtek S200 and is running wm5 (installed after last update leave me in three-color boot screen).

Any idea?

Thanks in advance.

1. thanks for using my LazyTool,

2. tips for success in NVID or Flashing...
2.1 force bootloader (better tofor NVID),
2.2 stop all related connection services like My Mobiler, Mobile commander...... @ PC,
2.3 disable today plugins,
2.4 make a softreset or clear storage or a hardreset if needed,
2.5 check your usb cable and must use rear panel usb ports..... :)

3. Attention needed for flashing NVID,
3.1 it will stay @ 95% for a while, so please be patient,
3.2 NVID is a WM5 rom, you may immediate make a softreset before its autorun/config for time saving :D (you should be feeling quite hurry in ths stage :D),
3.3 make an good activesync connections with NO data selected for sync,

Forn those "bullet-proof" Prophets (no change upon hardSPL, please use lazytool :)
SHOULD BE OK

[Vieira]

1. thanks for using my LazyTool,

Thank you for creating it! Really appreciate your work.


2. tips for success in NVID or Flashing...
2.1 force bootloader (better tofor NVID),
2.2 stop all related connection services like My Mobiler, Mobile commander...... @ PC,
2.3 disable today plugins,
2.4 make a softreset or clear storage or a hardreset if needed,
2.5 check your usb cable and must use rear panel usb ports..... :)

This is a clean copy of windows (only ActiveSync running) and of Windows Mobile 5 (just hard-reseted).


3. Attention needed for flashing NVID,
3.1 it will stay @ 95% for a while, so please be patient,
3.2 NVID is a WM5 rom, you may immediate make a softreset before its autorun/config for time saving :D (you should be feeling quite hurry in ths stage :D),
3.3 make an good activesync connections with NO data selected for sync,

I can flash NVID_RUU (windows mobile 5 "original") without problems.
I can't flash 6.5.1 23506 from bikertibi . Whenever I install using his tool it leaves me in three-color boot screen (after 100%, device restarts, three-color). If I try lazy tool it always gives me a connection error. PDA screen stays white, in the computer screen progress never leaves 0% and a connection error eventually appears. I've been trying for days now... :/
Any idea or suggestion?

Thanks for your help!

[dioxda2]

Thank you for creating it! Really appreciate your work.


This is a clean copy of windows (only ActiveSync running) and of Windows Mobile 5 (just hard-reseted).


I can flash NVID_RUU (windows mobile 5 "original") without problems.
I can't flash 6.5.1 23506 from bikertibi . Whenever I install using his tool it leaves me in three-color boot screen (after 100%, device restarts, three-color). If I try lazy tool it always gives me a connection error. PDA screen stays white, in the computer screen progress never leaves 0% and a connection error eventually appears. I've been trying for days now... :/
Any idea or suggestion?

Thanks for your help!

try to download theh rom again... or pm to dear bikertibi :)

[Vieira]

I finally got it working... after a lot of tries but it's working now! :D
Thank you very much for your great lazy_tools and for taking time to help me!

[kitsunefox]

ii need help my del axim x5 has white scren of death too can somebody help me out plz

[whamms]

Need help with dopod 818 pro.unable to update,gives the same error as above.I'm on a vista laptop but the update does not even leave 0%.it goes to the bootleg screen but mobile sync says it's not connected.
Tried doing a hard reset,update the drivers,tried different rom updates also.
Any help out there will be appreaciated.

[dioxda2]

Need help with dopod 818 pro.unable to update,gives the same error as above.I'm on a vista laptop but the update does not even leave 0%.it goes to the bootleg screen but mobile sync says it's not connected.
Tried doing a hard reset,update the drivers,tried different rom updates also.
Any help out there will be appreaciated.

1. find an XP PC.....,

2. force your prophet to bootloader mode,

3. flash NVID......

Good Luck :)

[whamms]

Do I really need to use a XP machine? Is there a way to fix it using my Vista machine?
I had tried on downloading a different device driver for my dopod, but its still the same.

But if I have to, I will try to look for an XP machine