My treo 750v is dead?

[crislovestefy]

Hello, i have the problem with my treo 750v.
When i push the reset button and red phone i will see Erase all data ?
If i say yes or no the screen is black.
And when i push the button on the left of the phone and reset pin appear
this screen with 5ive colors suchas dark red, red, green, blue, white and
these texts:

CHEE100
IPL-0.20

CHEE100
SPL-1.40.OliNex


On the white color when the phone is plugged into pc the text is "usb" and when is not plugged the text change into "SERIAL".

I have kingston microsd adapter and microsd 4gb hc? is this problem? hc is not beeing saw from palm treo750v?

how do i do?
thanks
i'm scared!!!!!

[crislovestefy]

no message no party this palm is dead and responsibility is your! :mad: and i would get it to life! thanks!

[ahvl]

First, this isn't Treo 750 section. Please post your question on a right place.

Anyway, if you can get into the bootloader (tri-color page), try to flash the original ROM or custom ROM to see if it helps by using your mini-SD card.

[hungdq3]

Hello, i have the problem with my treo 750v.
When i push the reset button and red phone i will see Erase all data ?
If i say yes or no the screen is black.
And when i push the button on the left of the phone and reset pin appear
this screen with 5ive colors suchas dark red, red, green, blue, white and
these texts:

CHEE100
IPL-0.20

CHEE100
SPL-1.40.OliNex


On the white color when the phone is plugged into pc the text is "usb" and when is not plugged the text change into "SERIAL".

I have kingston microsd adapter and microsd 4gb hc? is this problem? hc is not beeing saw from palm treo750v?

how do i do?
thanks
i'm scared!!!!!
You are in Bootloader moder. that no problem.
SPL-1.40.OliNex Your phone already HardSPL and unlock Sim.
You can now reset to boot again for using your phone as normal.
if you still stuck as Boot loader
Try to up rom by Mini SD (not micro SD with adapter) by copy CHEEIMG.nbh to root of memory card. plug it in to phone. enter bootloader again, put red button while you are asked, wait 10 minute until finish and hardreset.
If can not you can up room though you cable. down load this tool uproom (http://www.4shared.com/file/155043956/a5b6f641/KaiserCustomRUU.html) and unrar to a folder copy CHEEIMG.nbh to this folder (same with KaiserCustomRUU.exe) Enter bootloader,remover media card, connect phone with PC and run KaiserCustomRUU.exe to uproom
Goodluck.

[aguazz]

Hello all!
I'm also have the same problem. I've got Treo 750v Vodafone and it's brick.
I've try all solutions that hungdq3 wrote in post #4 but it's unsuccessful.
Then i've connected over usb tty i've try this commands:
Cmd>set 14 0
(restart, nothing changed)
Cmd>set 16 0
(the same)
Cmd>info 7

HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Cheetah, Bootloader Version : 1.40.OliNex
Built at: Oct 08 2007 00:32:42
Copyright (c) 1998-2007 Olipro & Cmonex - Hard-SPL

CPU ID=0x41129200
Main CPLD version=0x6
Main Board version=0x2

The command "info 8" print only this lines:
Block 0x3D4(980) is BAD block !!!
Block 0x3D5(981) is BAD block !!!
Block 0x3D6(982) is BAD block !!!
Block 0x3D7(983) is BAD block !!!
Block 0x3D8(984) is BAD block !!!
Block 0x3D9(985) is BAD block !!!
Block 0x3DA(986) is BAD block !!!
Block 0x3DB(987) is BAD block !!!
Block 0x3DC(988) is BAD block !!!
Block 0x3DD(989) is BAD block !!!
Block 0x3DE(990) is BAD block !!!
Block 0x3DF(991) is BAD block !!!
Block 0x3E0(992) is BAD block !!!
Block 0x3E1(993) is BAD block !!!
Block 0x3E2(994) is BAD block !!!
Block 0x3E3(995) is BAD block !!!
Block 0x3E4(996) is BAD block !!!
Block 0x3E5(997) is BAD block !!!
Block 0x3E6(998) is BAD block !!!
Block 0x3E7(999) is BAD block !!!
Block 0x3E8(1000) is BAD block !!!
Block 0x3E9(1001) is BAD block !!!
Block 0x3EA(1002) is BAD block !!!
Block 0x3EB(1003) is BAD block !!!
Block 0x3EC(1004) is BAD block !!!
Block 0x3ED(1005) is BAD block !!!
Block 0x3EE(1006) is BAD block !!!
Block 0x3EF(1007) is BAD block !!!
Block 0x3F0(1008) is BAD block !!!
Block 0x3F1(1009) is BAD block !!!
Block 0x3F2(1010) is BAD block !!!
Block 0x3F3(1011) is BAD block !!!
Block 0x3F4(1012) is BAD block !!!
Block 0x3F5(1013) is BAD block !!!
Block 0x3F6(1014) is BAD block !!!
Block 0x3F7(1015) is BAD block !!!
Block 0x3F8(1016) is BAD block !!!
Block 0x3F9(1017) is BAD block !!!
Block 0x3FA(1018) is BAD block !!!
Block 0x3FB(1019) is BAD block !!!
Block 0x3FC(1020) is BAD block !!!
Block 0x3FD(1021) is BAD block !!!
Block 0x3FE(1022) is BAD block !!!
Block 0x3FF(1023) is BAD block !!!

I've try to format:
Cmd>task 28
Storage format start
Write Nand Success
(and nothing also)

Does somebody have any idea about how to brings this Treo to life?
Thanks and sorry for my english.

[george_f1]

1.download and open T750URT
change your langouage and folow the steps of programm
after all that install an official windows mobile rom of treo 750


http://rapidshare.com/files/442778132/T750URT.exe