Vilord's ext2 backup and senseHERO error.

[Giggles 312]

So heres the low-down:

My (4GB) SD Card is partitioned as so:
1.8GB fat32
1GB ext2 (system)
1GB ext2 (data)

I've put the latest basefiles (20091116) in the fat32 partition along with the senseHERO 1.3.3 build. i boot up haret go through the installer for the data. finish all the steps and once it starts to boot, i either get "android_power wakeup" or "ERROR: CANNOT LINE EXECUTABLE 's/system/bin/sh' "
it wont boot into the build and it's kinda buggin me out man.

so if anyone has any idea on what i should do please help. thanks people :D

[TheKartus]

Not sure what the issue is, but your ext2 partitions are much much larger than they need to be.

[Giggles 312]

Not sure what the issue is, but your ext2 partitions are much much larger than they need to be.

yeah i'm gonna fix that. lol. so when running the vogue installer i hit volume down to start it. then do i hit volume down to wipe data or end. or do i basicly hit volume down all the way till it says press any key to boot?

[TheKartus]

yeah i'm gonna fix that. lol. so when running the vogue installer i hit volume down to start it. then do i hit volume down to wipe data or end. or do i basicly hit volume down all the way till it says press any key to boot?

First time around you want to run the recovery, then you want wipe data and and backup. Then you should be good to go.

[mssmison]

Android power wakeup sounds like it's not using the proper init.rc file, confirm that you have the init.hero.rc in your init folder on the sdcard.
So heres the low-down:

My (4GB) SD Card is partitioned as so:
1.8GB fat32
1GB ext2 (system)
1GB ext2 (data)

I've put the latest basefiles (20091116) in the fat32 partition along with the senseHERO 1.3.3 build. i boot up haret go through the installer for the data. finish all the steps and once it starts to boot, i either get "android_power wakeup" or "ERROR: CANNOT LINE EXECUTABLE 's/system/bin/sh' "
it wont boot into the build and it's kinda buggin me out man.

so if anyone has any idea on what i should do please help. thanks people :D

[Giggles 312]

First time around you want to run the recovery, then you want wipe data and and backup. Then you should be good to go.

yup thats what i've been doing all this time, but still getting the android_power wakeup error. i dug into some older threads and found nothing really to my benifit, but i realized that its not vilord's backup method thats killing me, its either the build or my phone.

[TheKartus]

yup thats what i've been doing all this time, but still getting the android_power wakeup error. i dug into some older threads and found nothing really to my benifit, but i realized that its not vilord's backup method thats killing me, its either the build or my phone.

The nuclear option always seems to work... repartition the SD card, redownload the basefiles and a sytem file and just start from scratch.

[Giggles 312]

Android power wakeup sounds like it's not using the proper init.rc file, confirm that you have the init.hero.rc in your init folder on the sdcard.

ok. thats a step in the right direction, but i forgot to mention that imma COMPLETE NOOb at working with android and linux. imma windows man XD and i just got into the swing of useing a smartphone. so yea XD where is this init.hero.rc you speak of? and how would i "fix" it?

BTWS mssmison i used you ext2 partition backup on a donut build and it was flawless. made everything so much smoother and perfect. thats why i wanna do this to a hero build so i can have a hero android phone without actually coughing up my hard earned cash on one ... yet

[jamezelle]

power wake up errors also can be caused by bad permissions set for /bin could you possibly upload a logcat?

[Giggles 312]

power wake up errors also can be caused by bad permissions set for /bin could you possibly upload a logcat?

i would if i knew how. being a noob sucks :/

[n0r]

i have a kaiser

p1: Fat32 1.8 gig
p2: Ext2 200 mb

When i start haret it keeps giving me mdp_dma_to_middi: busy.


wont go further then this...

being a n00b to...

[ajclai08]

i have a kaiser

p1: Fat32 1.8 gig
p2: Ext2 200 mb

When i start haret it keeps giving me mdp_dma_to_middi: busy.


wont go further then this...

being a n00b to...



your going to need a data partiton as well(another ext2 partition). Make both ext2 partitions 256mb and the rest fat32.The dma_mddi error happens to me and it boots fine..but the screen rotates upside down when you open the keyboard.

[n0r]

your going to need a data partiton as well(another ext2 partition). Make both ext2 partitions 256mb and the rest fat32.The dma_mddi error happens to me and it boots fine..but the screen rotates upside down when you open the keyboard.

ok thnx!

I read on another post this resolution: 288x384

maybe ittl help you?

[mssmison]

ok thnx!

I read on another post this resolution: 288x384

maybe ittl help you?

no, hero based builds all have to be 320x480

[silex]

i would if i knew how. being a noob sucks :/
This thread is funny.

[ruizit0]

the screen flips down when you open keyboard because zimage24.. use zimage23 and that will be fixed... search it at deprecated in vogue-android :)

[synaptyc]

I would like step-by-step info on how to format my SD card to have an EXT2 partition.
I currently use Windows 7.
What tools or downloads are required? I've searched a bit but can't find a tutorial.
Thnx in advance!