Hunter_I
25th November 2009, 08:02 PM
Hi All,
I did some search, but it seems there's no Error 270 topic for a Touch Diamond. And surprisingly that's the problem I have. Here's the deal.
For a whole duration of the day I've been trying to upgrade to 2.03 ROM, which would my first ROM upgrade. I tried the ROM from the phone's importer site, the HTC site, xda site, all lof them with the same result. After the RRU reaches 100% the mobile goes to Tricolor with "Upgrade ROM code error" message and the RRU shows says Error 270.
I searched the forum and saw that some of the people suggested to burn different HardSPL versions, so I tried burning the 2.03 with various HardSPL versions, 1.24, 1.30, 1.93 are the few I remember, there were more, both signed and unsigned, the last is SPL-1.93.OliNex unsigned -> all of them installed nicely, with a clean reset after them but the following upgrade to 2.03 failed every time the same way, Error 270, as usual.
I use an original USB cable and an XP OS that, at the moment of RUUing, runs nothing but the RUU.
By the way, I also tried doing the upgrade from the internal storage. I renamed the ~100MB file to the name specified in the Noob Guide (DIAMIMG.NBH) and put it at the root of the storage device, but the bootloader gray screen says no image found (or something similar and goes directly to trying to find a USB host).
I did some search, but it seems there's no Error 270 topic for a Touch Diamond. And surprisingly that's the problem I have. Here's the deal.
For a whole duration of the day I've been trying to upgrade to 2.03 ROM, which would my first ROM upgrade. I tried the ROM from the phone's importer site, the HTC site, xda site, all lof them with the same result. After the RRU reaches 100% the mobile goes to Tricolor with "Upgrade ROM code error" message and the RRU shows says Error 270.
I searched the forum and saw that some of the people suggested to burn different HardSPL versions, so I tried burning the 2.03 with various HardSPL versions, 1.24, 1.30, 1.93 are the few I remember, there were more, both signed and unsigned, the last is SPL-1.93.OliNex unsigned -> all of them installed nicely, with a clean reset after them but the following upgrade to 2.03 failed every time the same way, Error 270, as usual.
I use an original USB cable and an XP OS that, at the moment of RUUing, runs nothing but the RUU.
By the way, I also tried doing the upgrade from the internal storage. I renamed the ~100MB file to the name specified in the Noob Guide (DIAMIMG.NBH) and put it at the root of the storage device, but the bootloader gray screen says no image found (or something similar and goes directly to trying to find a USB host).