Bricked or dead?

[tjeaton]

I recently just re-flashed the rom on my elf, it got to 100% and windows said it completed. I now try to turn the phone on and nothing happens? the battery isnt dead either, help please

[lupinnktp]

I recently just re-flashed the rom on my elf, it got to 100% and windows said it completed. I now try to turn the phone on and nothing happens? the battery isnt dead either, help please

hmmm, not sure if this helps (coz i arrived at it through a different process). but my device couldn't be turned on. no light even as charger was plugged in. but i did the "hold Camera button and poke the reset hole" then i got into boot into bootloader

[vicky.9871]

my htc touch p3452 is dead becoz i flash but something is wrong and then it was dead now it will on on bootloder mode(red,green,blue) here is my detail please tell ,me what to do

it show..
IPL 3.07.0002
SPL 3.07.0000
DEVICE ID= ELF010050
CID= DOPOD001

45 4C 46 30 31 30 30 35 30 00 00 00 00 00 00 00 ELF010050.......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
44 4F 50 4F 44 30 30 31 00 00 00 00 00 00 00 00 DOPOD001........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 ..............


i also tryed to flash "DID-ELF010050_CID-DOPOD001_ROM-2.20.721.2B" but is not flashed it gave "error 270 update error" something please tell me where is the problem and how to solve please guys

[tito12]

You have to cid unlock first before flashing any rom...

[Fa7my]

my htc touch p3452 is dead becoz i flash but something is wrong and then it was dead now it will on on bootloder mode(red,green,blue) here is my detail please tell ,me what to do

it show..
IPL 3.07.0002
SPL 3.07.0000
DEVICE ID= ELF010050
CID= DOPOD001

45 4C 46 30 31 30 30 35 30 00 00 00 00 00 00 00 ELF010050.......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
44 4F 50 4F 44 30 30 31 00 00 00 00 00 00 00 00 DOPOD001........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 ..............


i also tryed to flash "DID-ELF010050_CID-DOPOD001_ROM-2.20.721.2B" but is not flashed it gave "error 270 update error" something please tell me where is the problem and how to solve please guys

ok.. maybe you should try this (http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard).. hope it helps..

[htcfreak]

You have to cid unlock first before flashing any rom...

Yup by the prob its showin, the CID is definitely locked, so 1st unlock the CID & then flash the ROM of your choice..!!!

Do remember also upgrade the "IPL & HSPL"..!!!

Njoy the FLASHING..!!!

[vicky.9871]

how to downgrade or upgrade my ips and spl my device already in bootloder mode please tell me

[Fa7my]

to upgrade your SPL (or flash HardSPL) u first need to have your device "alive" again as flashing the HardSPL is done by using ActiveSync.. I would suggest you try a hard reset (by holding the Call & End buttons and reseting with the stylus).. if that didn't work and you still can't load into WinMo interface.. then you might want to try the method (http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard) I mentioned above..
hope this helps..

[tjeaton]

Ok just some info about the phone:

I already CID unlocked it, so that couldnt have been the problem as i was running onyx rom

I have tried getting into the three colours screen and still nothing happens, the battery isn't dead

Led used to turn on when it was charging now it doesn't :/

On button doesn't seem to make the device do anything either

[Fa7my]

Ok just some info about the phone:

I already CID unlocked it, so that couldnt have been the problem as i was running onyx rom

I have tried getting into the three colours screen and still nothing happens, the battery isn't dead

Led used to turn on when it was charging now it doesn't :/

On button doesn't seem to make the device do anything either

Did you flash an original or shipped ROM?? sometimes that causes problems when used with HardSPL..

[tjeaton]

Yeah it was an original backup of the factory rom that was already on it, is their anyway of actually recovering my phone to a normal state again, at least the tri color or even led's when charging

[Fa7my]

Yeah it was an original backup of the factory rom that was already on it, is their anyway of actually recovering my phone to a normal state again, at least the tri color or even led's when charging

srry man.. but I can't help you.. flashing an original ROM over HardSPL can brick your phone.. and I don't want to disappoint you but I don't know how to recover it.. still I'm a not a pro.. :S:S

[tjeaton]

:( anyone else out there on xda can help, it would be great if you could thanks for the help so far people :)

[crapula512]

i'm no sure that u have a software problem but if it is, then your only hope is jtag.
check this: http://forum.xda-developers.com/showthread.php?t=602233

too bad there is no more information anywhere, but at least those jtags are easy to solder!

g00d luck!

[crapula512]

btw, have you tried the voodoo reset posted by aonellbicho in the jtag thread? any luck with it?
I've never seen it before, and u will probably need as many hands as Shiva has to do it...

[tjeaton]

guess i can give it a go, what else could go wrong lol

[tjeaton]

yeah the voodoo reset doesn't work, i think its a fake its pretty hard to press all of those things at once