Nova Launcher Update Brings Lollipop Functionality and Feel

One of the most popular third party launcher on Android, Nova Launcher, has just … more

Check Your I/O Usage with Iotop for Android

Ever needed to check the I/O usage of apps? If so, you probably tried searching for an iotop … more

T-Mobile HTC One M8 Gets Selfie-Friendly Android 4.4.4 OTA

The T-Mobie variant of HTC One (M8) just now received an over-the-air update … more

Android L is for Lockdown

Root is, without a doubt, the (un)holy grail of the Android world. Those wonderful permissions that allow you as … more
Post Reply

Full Rom SM-G900M

OP Dyone Aliano

5th July 2014, 03:48 PM   |  #1  
OP Junior Member
Thanks Meter: 0
 
8 posts
Join Date:Joined: Jun 2014
I just need the CSC file of Rom SM-G900M to put the SM-G900A to have the Portuguese of Brazil, but it is not possible to download separately. Where can I get?
10th July 2014, 05:03 PM   |  #2  
Junior Member
Thanks Meter: 0
 
26 posts
Join Date:Joined: Dec 2009
Quote:
Originally Posted by Dyone Aliano

I just need the CSC file of Rom SM-G900M to put the SM-G900A to have the Portuguese of Brazil, but it is not possible to download separately. Where can I get?

Need it too
12th July 2014, 09:22 PM   |  #3  
PadsPCB's Avatar
Junior Member
Flag São Paulo
Thanks Meter: 4
 
6 posts
Join Date:Joined: Feb 2012
More
Simple tutorial in how to install G900MZTO1ANE4 on G900A
Hi everybody!
As many of you get a nice G900A from AT&T but lack the languages even if they are enabled.
Languages came inside eack application, so you should replace all with the international versions.
I tried this at first, and phone keeped on crashing.
So first of all get the Stock Firmware from here!
This is very usefull so you can allways reflash the phone again and again... I needed to do it several times until i managed to fix this:

What you will need:
1- EFS Professional from here
2- My EFS Pro G900M backup from here
3- Start your phone
4- Enable unknown sources in config|security
5- Enable USB Debuging in Development Mode (tap some times in config|about device|build number)
6- Root it with TowelRoot
7- Reboot anyway
8- Install BusyBox
(you may download and save towelroot and busybox to the sd card so you can skip all nonsense on starting)
9- Run busybox and allow it to install all stuff.

10- On your PC, extract the EFS Professional to some place.
11- Run EFS pro
12- Accept RSA on computer and shell on ADB
13- On EFS Pro select the Backup tab
14- On Device Filters select ***All Partitions***
15- Deselect All
16- Select efs (/dev/block/mmcblk0p12)
17 Backup this

Now EFS Pro will have created a folder named EFSProBackup
18- Copy the SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz to this folder
19- Go to the Restore Tab and Refresh Backup Archives

You may now see both files, the SAMSUNG-SM-G900A_some_numbers_here.tar.gz and SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz
If the names are different and you only see the backup file you just did, just rename the G900M file to start similarly to the one you saved.

20- Select the file SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz(pc)
EFS Pro will copy file to the device
21- Select the boot.img and the system.img.ext4 and Restore.

22- You may enter in recovery and clean all to factory default and start your device now with full G900M system.

Hope this helps for now until we unlock the flash.

Best regards to all
Last edited by PadsPCB; 12th July 2014 at 09:31 PM. Reason: Typo errors
The Following 2 Users Say Thank You to PadsPCB For This Useful Post: [ View ]
24th July 2014, 01:02 AM   |  #4  
OP Junior Member
Thanks Meter: 0
 
8 posts
Join Date:Joined: Jun 2014
Error
Thanks for the help, but unfortunately I get two errors:
On backup:
aaa.png and bbb.png
On restore:
ccc.png
Please, help me.
Thank you.
Attached Thumbnails
Click image for larger version

Name:	bbb.png
Views:	114
Size:	74.3 KB
ID:	2867569   Click image for larger version

Name:	ccc.png
Views:	92
Size:	73.0 KB
ID:	2867570   Click image for larger version

Name:	aaa.png
Views:	86
Size:	74.2 KB
ID:	2867571  
1st August 2014, 12:12 AM   |  #5  
Senior Member
Thanks Meter: 32
 
227 posts
Join Date:Joined: Dec 2011
Question
Quote:
Originally Posted by PadsPCB

Hi everybody!
As many of you get a nice G900A from AT&T but lack the languages even if they are enabled.
Languages came inside eack application, so you should replace all with the international versions.
I tried this at first, and phone keeped on crashing.
So first of all get the Stock Firmware from here!
This is very usefull so you can allways reflash the phone again and again... I needed to do it several times until i managed to fix this:

What you will need:
1- EFS Professional from here
2- My EFS Pro G900M backup from here
3- Start your phone
4- Enable unknown sources in config|security
5- Enable USB Debuging in Development Mode (tap some times in config|about device|build number)
6- Root it with TowelRoot
7- Reboot anyway
8- Install BusyBox
(you may download and save towelroot and busybox to the sd card so you can skip all nonsense on starting)
9- Run busybox and allow it to install all stuff.

10- On your PC, extract the EFS Professional to some place.
11- Run EFS pro
12- Accept RSA on computer and shell on ADB
13- On EFS Pro select the Backup tab
14- On Device Filters select ***All Partitions***
15- Deselect All
16- Select efs (/dev/block/mmcblk0p12)
17 Backup this

Now EFS Pro will have created a folder named EFSProBackup
18- Copy the SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz to this folder
19- Go to the Restore Tab and Refresh Backup Archives

You may now see both files, the SAMSUNG-SM-G900A_some_numbers_here.tar.gz and SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz
If the names are different and you only see the backup file you just did, just rename the G900M file to start similarly to the one you saved.

20- Select the file SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz(pc)
EFS Pro will copy file to the device
21- Select the boot.img and the system.img.ext4 and Restore.

22- You may enter in recovery and clean all to factory default and start your device now with full G900M system.

Hope this helps for now until we unlock the flash.

Best regards to all

Thank you!

Hi,
I try to extract Languages from G900F for every USA S5 deviecs (Like Arabic and hebrew etc.)
But i don't what to do, your Instructions & G900M will bring me those (Heb & Arab lang) or all the Languages to every USA S5 Devices?
SM-G900A /G900T /G900W8/ G900M /G900T1 what if I try your files on Non-US devices ?

What this guide does? (/dev/block/mmcblk0p12) ?

What are the risks ?

It won't Brick the Device?
What about KNOX it will trip?
It will Prevent get OTA updates?
Can I use this guide on S4 / Note 3 ? (of course i will get other EFS files from Note 3 / S4)

My post:

http://forum.xda-developers.com/gala...5#post54530995

Thank you!
19th October 2014, 05:07 AM   |  #6  
Junior Member
Thanks Meter: 0
 
15 posts
Join Date:Joined: Feb 2009
Quote:
Originally Posted by PadsPCB

Hi everybody!
As many of you get a nice G900A from AT&T but lack the languages even if they are enabled.
Languages came inside eack application, so you should replace all with the international versions.
I tried this at first, and phone keeped on crashing.
So first of all get the Stock Firmware from here!
This is very usefull so you can allways reflash the phone again and again... I needed to do it several times until i managed to fix this:

What you will need:
1- EFS Professional from here
2- My EFS Pro G900M backup from here
3- Start your phone
4- Enable unknown sources in config|security
5- Enable USB Debuging in Development Mode (tap some times in config|about device|build number)
6- Root it with TowelRoot
7- Reboot anyway
8- Install BusyBox
(you may download and save towelroot and busybox to the sd card so you can skip all nonsense on starting)
9- Run busybox and allow it to install all stuff.

10- On your PC, extract the EFS Professional to some place.
11- Run EFS pro
12- Accept RSA on computer and shell on ADB
13- On EFS Pro select the Backup tab
14- On Device Filters select ***All Partitions***
15- Deselect All
16- Select efs (/dev/block/mmcblk0p12)
17 Backup this

Now EFS Pro will have created a folder named EFSProBackup
18- Copy the SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz to this folder
19- Go to the Restore Tab and Refresh Backup Archives

You may now see both files, the SAMSUNG-SM-G900A_some_numbers_here.tar.gz and SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz
If the names are different and you only see the backup file you just did, just rename the G900M file to start similarly to the one you saved.

20- Select the file SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz(pc)
EFS Pro will copy file to the device
21- Select the boot.img and the system.img.ext4 and Restore.

22- You may enter in recovery and clean all to factory default and start your device now with full G900M system.

Hope this helps for now until we unlock the flash.

Best regards to all

thanks
19th October 2014, 11:15 AM   |  #7  
Junior Member
Thanks Meter: 0
 
15 posts
Join Date:Joined: Feb 2009
Quote:
Originally Posted by PadsPCB

Hi everybody!
As many of you get a nice G900A from AT&T but lack the languages even if they are enabled.
Languages came inside eack application, so you should replace all with the international versions.
I tried this at first, and phone keeped on crashing.
So first of all get the Stock Firmware from here!
This is very usefull so you can allways reflash the phone again and again... I needed to do it several times until i managed to fix this:

What you will need:
1- EFS Professional from here
2- My EFS Pro G900M backup from here
3- Start your phone
4- Enable unknown sources in config|security
5- Enable USB Debuging in Development Mode (tap some times in config|about device|build number)
6- Root it with TowelRoot
7- Reboot anyway
8- Install BusyBox
(you may download and save towelroot and busybox to the sd card so you can skip all nonsense on starting)
9- Run busybox and allow it to install all stuff.

10- On your PC, extract the EFS Professional to some place.
11- Run EFS pro
12- Accept RSA on computer and shell on ADB
13- On EFS Pro select the Backup tab
14- On Device Filters select ***All Partitions***
15- Deselect All
16- Select efs (/dev/block/mmcblk0p12)
17 Backup this

Now EFS Pro will have created a folder named EFSProBackup
18- Copy the SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz to this folder
19- Go to the Restore Tab and Refresh Backup Archives

You may now see both files, the SAMSUNG-SM-G900A_some_numbers_here.tar.gz and SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz
If the names are different and you only see the backup file you just did, just rename the G900M file to start similarly to the one you saved.

20- Select the file SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz(pc)
EFS Pro will copy file to the device
21- Select the boot.img and the system.img.ext4 and Restore.

22- You may enter in recovery and clean all to factory default and start your device now with full G900M system.

Hope this helps for now until we unlock the flash.

Best regards to all


hi, when restore, i have error : "Unable to extract archive !"

Plz, help me.

Rgds.

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in AT&T Galaxy S5 Q&A, Help & Troubleshooting by ThreadRank