Its about porting Recovery easily...in 15 minutes...
Ok lets start......
_________________________________
Requirments:
1.Apktools letast version (Search on xda or google)
2.NP++ for mobile (Search on google)
3.Root Explorer or any Good file explorer (Search on google)
4.Recovery tools (Search on google)
_________________________________
Step:1
Frist take your stock boot.img,stock recovery and any other recovery like CWM or CTR (Without
TWRP)
Now put them in safe folder on your sdcard or storge and go to apktools...Unpack boot.img in a new folder then unpack Stock recovery in another folder and unpack your cwm or CTR recovery in Another folder...
All done!Now unpack your recovery in a new folder
(whitch you want to port)...
_________________________________
Step:2
Now go to your unpacked boot.img and go to
ramdisk folder then copy these files and paste it to your recovery (whitch you want to port)
1.meta_init.modem.rc
2.meta_init.project.rc
3.meta_init.rc
Done!
Now go to your unpacked stock recovery and copy ( #Karnel ) and paste it to your unpacked recovery (Whitch you want to port).Then again go to unpacked stock recovery and go to ramdisk...then copy these files and paste them in you unpacked recovery (whitch you want to port) /ramdisk and replace all...
1.fstab
2.ueventd.rc
3.ueventd.goldfish.rc.
Done!
Now go to your unpacked CWM or CTR and go to ramdisk/etc and copy ( recovery.fstab ) and paste it to you unpacked recovery (whitch you want to port) /ramdisk/etc and replace....
Done!Now go to your unpacked recovery (whitch you want to port) then go to ramdisk and open default.prop and edit this as you edit build.prop of a custom rom...
All Done!
_________________________________
Finel step :
Now go to your unpacked recovery (whitch you want to port) and click on ramdisk then repack it...done!
now you will see your new recovery named (new.img)...
Now open recovery tools and flash your new recovery...
And see magic or you can make a cwm flashable recovery.zip ...
Just download this ( http://www.mediafire.com/?yoch4142rowjkbj ) and extract it on a folder.
then renamed your new recovery file to recocery.img.
Now copy it and paste in these folder where you extracted that zip and replaced it.
Done!
now create a zip and go to recovery mood and flash it...
_________________________________
N.B. ->TWRP porting method is different...i will
give you later... Sometimes your new recovery
may not work...if its not work then try again and
be patient...
_________________________________
I hope this post was helpfull if think so and
successed to port your new recovery then dont
forget to give me some credits dude...
_________________________________
This is for mobile and those who doesn't have a PC. Sorry for bad English.
.
Credits to Md.Shafikul.islam for writing this
Ok lets start......
_________________________________
Requirments:
1.Apktools letast version (Search on xda or google)
2.NP++ for mobile (Search on google)
3.Root Explorer or any Good file explorer (Search on google)
4.Recovery tools (Search on google)
_________________________________
Step:1
Frist take your stock boot.img,stock recovery and any other recovery like CWM or CTR (Without
TWRP)
Now put them in safe folder on your sdcard or storge and go to apktools...Unpack boot.img in a new folder then unpack Stock recovery in another folder and unpack your cwm or CTR recovery in Another folder...
All done!Now unpack your recovery in a new folder
(whitch you want to port)...
_________________________________
Step:2
Now go to your unpacked boot.img and go to
ramdisk folder then copy these files and paste it to your recovery (whitch you want to port)
1.meta_init.modem.rc
2.meta_init.project.rc
3.meta_init.rc
Done!
Now go to your unpacked stock recovery and copy ( #Karnel ) and paste it to your unpacked recovery (Whitch you want to port).Then again go to unpacked stock recovery and go to ramdisk...then copy these files and paste them in you unpacked recovery (whitch you want to port) /ramdisk and replace all...
1.fstab
2.ueventd.rc
3.ueventd.goldfish.rc.
Done!
Now go to your unpacked CWM or CTR and go to ramdisk/etc and copy ( recovery.fstab ) and paste it to you unpacked recovery (whitch you want to port) /ramdisk/etc and replace....
Done!Now go to your unpacked recovery (whitch you want to port) then go to ramdisk and open default.prop and edit this as you edit build.prop of a custom rom...
All Done!
_________________________________
Finel step :
Now go to your unpacked recovery (whitch you want to port) and click on ramdisk then repack it...done!
now you will see your new recovery named (new.img)...
Now open recovery tools and flash your new recovery...
And see magic or you can make a cwm flashable recovery.zip ...
Just download this ( http://www.mediafire.com/?yoch4142rowjkbj ) and extract it on a folder.
then renamed your new recovery file to recocery.img.
Now copy it and paste in these folder where you extracted that zip and replaced it.
Done!
now create a zip and go to recovery mood and flash it...
_________________________________
N.B. ->TWRP porting method is different...i will
give you later... Sometimes your new recovery
may not work...if its not work then try again and
be patient...
_________________________________
I hope this post was helpfull if think so and
successed to port your new recovery then dont
forget to give me some credits dude...
_________________________________
This is for mobile and those who doesn't have a PC. Sorry for bad English.
.
Credits to Md.Shafikul.islam for writing this
