PSA: You Can Optimize Your Note 4’s Recents Menu & RAM

The Note 4 never had the fastest Recents Menu, and despite its 3GB of RAM, … more

XDA Picks: Best Apps of the Week (July 25 – Aug 1)

Apps are at the front and center of any smartphone experience, and with over a … more

Voices Of XDA: Orbiting The Earth With Android

Editor’s note: This week’s feature has been written by forum … more

CloudPlayer: DIY HiFi Music Streaming Solution

In our Helpful Guide to Music Streaming Services, we mentioned several different services … more

[REQ]Dump of the preinstalled rom

3,554 posts
Thanks Meter: 1,611
By TheManii, Wiki Admin / Recognized Contributor on 6th July 2014, 08:18 PM
Post Reply Subscribe to Thread Email Thread
We already have a dump of KKV51, but that is not the actual rom that devices ship with preinstalled.

They ship with KMV78N, which we do not have a dump of for the g watch.

The main issue is enabling adb without having it force an update first.

Here's how to enable adb on it: [How-To] Android Wear: Enable Debugging, Take Screenshots, Unlock The Bootloader, And Root The LG G Watch

Originally Posted by TheManii

Android wear runs, well android.

I would like to request that someone that has a wear to dump the rom that is preinstalled on it, and to make note if there it prompts for an ota on first setup.

I don't know how to enable adb on it, but I would expect that it would be available, for the moment merely doing a

adb pull /system
will be as much as anyone can expect.

In the event it actually supports fastboot, I'd also like to request a
fastboot get-var all

6th July 2014, 10:58 PM |#2  
trh1341's Avatar
Senior Member
Thanks Meter: 660
Donate to Me
Can't you disconnect the phone from internet? I can try to do a dump when I get mine tomorrow morning
7th July 2014, 04:57 AM |#3  
OP Wiki Admin / Recognized Contributor
Thanks Meter: 1,611
Originally Posted by trh1341

Can't you disconnect the phone from internet? I can try to do a dump when I get mine tomorrow morning

If it's like current nexii rom (and given that the rom is made by google, i have no reason to doubt this), it might not let you use it until you have a sucessful connection to the internet which means the ability for it to force download an ota.

The ota is already out, so if it does immediately download the ota, you might not have the chance to dump it beforehand.
8th July 2014, 01:25 AM |#4  
Senior Member
Thanks Meter: 11
Is this still needed. Mine is still in box. Just got home.

I can attempt by disconnecting the pc from net and try to adb and pull a dump from fastboot via USB if cradle allows it. Otherwise I have Bluetooth.

Sent from my SCH-I545 using Tapatalk

Edit: I tried.... not connected to Phone. Hit reset button I could get to device info KKV51 loaded on mine out of the box. Sorry not a prize winner.... Unless you meant thus build.

I am still going to dump anyway if I can get adb to show online. It won't bring up authorization prompt. I'm done trying. I just want to set it up to use now. Sorry
Last edited by coolsilver; 8th July 2014 at 04:30 AM.
8th July 2014, 04:59 AM |#5  
Senior Member
Thanks Meter: 11
I tricked it... It's dumping now. I hope no apks from my phone installed from this ... doesn't look like it.

cat /proc/partitions
major minor #blocks name

179 0 3817472 mmcblk0
179 1 1024 mmcblk0p1
179 2 512 mmcblk0p2
179 3 512 mmcblk0p3
179 4 512 mmcblk0p4
179 5 512 mmcblk0p5
179 6 1024 mmcblk0p6
179 7 512 mmcblk0p7
179 8 512 mmcblk0p8
179 9 512 mmcblk0p9
179 10 2048 mmcblk0p10
179 11 512 mmcblk0p11
179 12 16384 mmcblk0p12
179 13 16384 mmcblk0p13
179 14 22528 mmcblk0p14
179 15 22528 mmcblk0p15
179 16 22528 mmcblk0p16
179 17 512 mmcblk0p17
179 18 512 mmcblk0p18
179 19 262144 mmcblk0p19
179 20 262144 mmcblk0p20
179 21 3182592 mmcblk0p21
179 22 495 mmcblk0p22
179 32 4096 mmcblk0rpmb

fastboot getvar all

(bootloader) max-download-size: 0x10000000
(bootloader) display-panel:
(bootloader) version-hardware: rev_11
(bootloader) version-baseband: N/A
(bootloader) version-bootloader: DORYZ10e
(bootloader) version-cdma: N/A
(bootloader) variant: dory 4GB
(bootloader) serialno: 03c3ca6d02a28867
(bootloader) carrier: None
(bootloader) secure-boot: yes
(bootloader) unlocked: no
(bootloader) product: dory
(bootloader) partition-size:aboot: 80000
(bootloader) partition-type:aboot: emmc
(bootloader) partition-size:boot: 1600000
(bootloader) partition-type:boot: emmc
(bootloader) partition-size:recovery: 1600000
(bootloader) partition-type:recovery: emmc
(bootloader) partition-size:system: 10000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:userdata: c2400000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: 10000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-sizeersist: 1000000
(bootloader) partition-typeersist: ext4
finished. total time: 0.096s
Last edited by coolsilver; 8th July 2014 at 05:54 AM.
29th November 2014, 06:22 PM |#6  
OP Wiki Admin / Recognized Contributor
Thanks Meter: 1,611
Originally Posted by Bill Yi

hi All,

Today, we pushed a kernel project for kitkat-wear release. The kernel source can be found on the android-msm-dory-3.10-kitkat-wear branch in the kernel/msm project. It has the following tags:
android-4.4w_r9 Factory-ROM
android-4.4w_r10 Update #1


There is a 2nd factory rom now, I need a dump of it if anyone happens to recieve a new g watch with the 2nd factory rom.
I still do not have a dump of KMV78N also.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes