Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,808,657 Members 44,072 Now Online
XDA Developers Android and Mobile Development Forum

[Q] Galaxy Gear Update

Tip us?
 
s0mewhitedude
Old
(Last edited by s0mewhitedude; 5th July 2014 at 02:42 PM.) Reason: Wrong forum
#1  
Junior Member - OP
Thanks Meter 0
Posts: 10
Join Date: Feb 2011
Unhappy [Q] Galaxy Gear Update

Hi Everyone, i have searched through the forums and tried what has been said, but still no luck. I have a galaxy Gear V700
I tried numerous times on kies to update and it just would not play ball at all.Even leaving it over night, thinking maybe it is downloading something.

Today i have used Odin today, and flashed with V700XXUCNF1_V700OXACNF1_BTU

Within Odin it does the following

<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..

then it freezes. Because it had froze for about 25 minutes, i unpluged the Gear, to try again. All of a sudden Odin jumped up and said failed, and the Gear now is stuck with "Firmware Upgrade encountered an issue, please select recovery mode in kies and try again"

Problem is Kies 2 and 3 do not recognise the watch anymore. Odin seems to recognise it but wont allow me to do anything . I have tried using Odin to flash an original stock image, and have even tried the earlier Tizan.

I am still stuck...

I am a complete newbie on here and do not really know much about the phones and watches, but got so frustrated at not being able to upgrade the traditional way.

Any help would be greatly appreciated..

Many thanks

 
s0mewhitedude
Old
#2  
Junior Member - OP
Thanks Meter 0
Posts: 10
Join Date: Feb 2011
I am now getting this in Odin 3.09, so it seems to be going a little further, but still fails at the end


<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> V700XXUCNF1_V700OXACNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> zImage
 
Leoisright
Old
#3  
Leoisright's Avatar
Recognized Developer
Thanks Meter 6,888
Posts: 4,825
Join Date: Dec 2010
Location: MN

 
DONATE TO ME
Quote:
Originally Posted by s0mewhitedude View Post
I am now getting this in Odin 3.09, so it seems to be going a little further, but still fails at the end


<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> V700XXUCNF1_V700OXACNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> zImage
I had this issue when trying to flash an incorrect image.

Sent from my SPH-L900 using XDA Premium HD app
Device: Samsung Note 2 and Samsung Nexus 10
Device: Microsoft Surface
Device: Samsung Tab 3 7"
ROM: S5 4.4.2 w/note 3 mods
Kernel: Stock

Nexus 10 Developement

Have helped with many mods and roms over the past 4 years. Devices I've helped include Evo 4G, Evo 4G LTE, Evo 3D, Note 2, HP Touchpad, and Nexus 10

Many thanks to Myn, Virus, Chubbzlou, Ewalk, TMartin, TommyTomatoe, CM, Sac, Platty, XDA, and so many more for helping me over the years to refine my skills
 
bballengphd
Old
#4  
Senior Member
Thanks Meter 29
Posts: 130
Join Date: Dec 2012
I have just answered your question in the Q&A forum.

Also a suggestion, please do not post questions in the General forum, and do not double post.
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes