Post Reply

[Baseband/Radio] UGKK7

8th December 2011, 08:17 PM   |  #1  
OP Junior Member
Thanks Meter: 18
 
22 posts
Join Date:Joined: Oct 2009
Hi all,

Picked up my phone from a Bell retail store today. I noticed that I have a baseband that doesn't seem to match anything I've seen here so far.

Unfortunately I have to take this one back tomorrow (the top right joint where the molded side pieces come together is splitting apart!), but if it helps I can do a dump tonight before I take it back. Please let me know if anyone is interested - I'm new to Android but would like to start getting involved.

build.prop:

Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=ITL41D
ro.build.display.id=ITL41D.I9250UGKK7
ro.build.version.incremental=I9250UGKK7
ro.build.version.sdk=14
ro.build.version.codename=REL
ro.build.version.release=4.0.1
ro.build.date=Fri Nov 18 20:54:44 KST 2011
ro.build.date.utc=1321617284
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-82
ro.build.tags=release-keys
ro.product.model=Galaxy Nexus
ro.product.brand=samsung
ro.product.name=yakjuux
ro.product.device=maguro
ro.product.board=tuna
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=maguro
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=yakjuux-user 4.0.1 ITL41D I9250UGKK7 release-keys
ro.build.fingerprint=samsung/yakjuux/maguro:4.0.1/ITL41D/I9250UGKK7:user/release-keys
ro.build.characteristics=nosdcard
EDIT:

Radio_UGKK7_I9250-CWM.zip (posted by perka)

8227bfdc068ecdd70cd2b6bd87c8b4db
Last edited by mskip; 13th December 2011 at 08:34 PM.
The Following 12 Users Say Thank You to bakedjake For This Useful Post: [ View ]
8th December 2011, 08:26 PM   |  #2  
1wayjonny's Avatar
Senior Member
Thanks Meter: 1,098
 
454 posts
Join Date:Joined: Jan 2007
Bell CA? They are CDMA correct?
8th December 2011, 08:28 PM   |  #3  
OP Junior Member
Thanks Meter: 18
 
22 posts
Join Date:Joined: Oct 2009
They used to be, but this is the GSM version that runs on their HSPA+ network.
8th December 2011, 08:50 PM   |  #4  
Recognized Developer
Flag Toronto
Thanks Meter: 3,780
 
2,207 posts
Join Date:Joined: Apr 2007
More
Yes, please post the bell modem. I am using the international version and it works fine but I think it will be better to use the Bell sanctioned modem.
8th December 2011, 10:35 PM   |  #5  
Senior Member
Thanks Meter: 20
 
335 posts
Join Date:Joined: Nov 2009
More
definitely appreciate if you can dump the radio from the Bell device

i'm also using the international device on Rogers, so it would be good to see how the Bell radio works in Canada (i'd guess its more optimized?)

I walked into a Bell store today to play around with their demo model but they somehow disabled the settings button so i couldnt check.

I also noticed your device comes with ITL41D and not ITL41F with the volume fix. Oh well, just wanted to point it out
8th December 2011, 10:53 PM   |  #6  
Senior Member
Flag Wales, UK Earth, The Universe
Thanks Meter: 33
 
345 posts
Join Date:Joined: Feb 2005
More
Quote:
Originally Posted by bakedjake

...
Unfortunately I have to take this one back tomorrow (the top right joint where the molded side pieces come together is splitting apart!)...

Are you sure it is? I was lucky enough to have four Galaxy Nexus in my possession at the same time, and all four had differing 'obviousness' of the seams that join the plastic together.
I could only choose between two of these, as the other two were on a network I'd since discovered was poor in two places I frequent...but, of the two remaining, one had obvious seams and the other didn't. On the obvious one, I was like "wtf a crack on the top right corner!", but after looking at it under various lights and angles, it occurred to me that the seam is simply more noticeable than the others.
The Following User Says Thank You to LadFromWales85 For This Useful Post: [ View ]
9th December 2011, 01:27 PM   |  #7  
OP Junior Member
Thanks Meter: 18
 
22 posts
Join Date:Joined: Oct 2009
Quote:

Are you sure it is?

There's a visible crack and I can feel it running my finger along the top. It's enough that it will bug me when I hold the phone, so it's going back for exchange.

---

How do I dump the radio? I've done some searching and it seems that lots of people use dd on /dev/mtd... but I see many references to 5 vs 0.

should I just dd /dev/mtd/mtd0? If not, please advise (or point me in the right direction with regards to documentation)
9th December 2011, 02:36 PM   |  #8  
efrant's Avatar
Senior Moderator
Flag Montreal Bow2DaCow
Thanks Meter: 8,086
 
9,535 posts
Join Date:Joined: Feb 2009
Donate to Me
More
I picked up my Galaxy Nexus from Virgin yesterday and it came with the XXKK7 radio as well. I'm more than happy to dump it if someone let's me know how. (I'm coming from a Nexus One with an ENG bootloader, so I'm not sure if I'd be able to do it the same way, i.e., using fastboot saveprt2sd?)
Last edited by efrant; 9th December 2011 at 02:38 PM.
9th December 2011, 02:41 PM   |  #9  
Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: Apr 2007
Quote:
Originally Posted by bakedjake

There's a visible crack and I can feel it running my finger along the top. It's enough that it will bug me when I hold the phone, so it's going back for exchange.

---

How do I dump the radio? I've done some searching and it seems that lots of people use dd on /dev/mtd... but I see many references to 5 vs 0.

should I just dd /dev/mtd/mtd0? If not, please advise (or point me in the right direction with regards to documentation)

In Galaxy Nexus the radio is located in

/dev/block/platform/omap/omap_hsmmc.0/by-name/radio

so using dd it would be

dd if=/dev/block/platform/omap/omap_hsmmc.0/by-name/radio of=/sdcard/radio.img
9th December 2011, 03:04 PM   |  #10  
OP Junior Member
Thanks Meter: 18
 
22 posts
Join Date:Joined: Oct 2009
Alright, I've posted it here

http://jake.io/android/UGKK7.img [16 MB]

The Following 3 Users Say Thank You to bakedjake For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Galaxy Nexus Android Development by ThreadRank