Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,741,535 Members 39,923 Now Online
XDA Developers Android and Mobile Development Forum

Gnex GSM Hardbricked Itself literally

Tip us?
 
Slayer_Grim
Old
#1  
Junior Member - OP
Thanks Meter 0
Posts: 3
Join Date: Jun 2014
Unhappy Gnex GSM Hardbricked Itself literally

Doing good on liquidsmooth rom for couple of months now. Kinda busy at work thus still stuck with quite a old version of JB Liquid smooth. Somehow, It managed to hardbrick itself without me screwing it up. Worked fine the night before, however when i woke up in the morning, booted it up and it crashed on itself. Now im stuck with a brick. Unable to boot, nor access bootloader for my recovery mode :c All my regular twrp backups wasted down the drain. Tried a power drain(remove battery and press power for 10+ secs), plug into usb power adapter then insert battery. Only landed me with a charging battery icon( with the lightning) and showing that the battery is fully charged. Was desperate and tried omap, no luck with it,seems to run sucessfully but nothing comes on the screen.Tried it with and without the battery. I understand the Gnex is a old phone but it died on itself with all my precious data. Anyone out here managed to revive their hard-bricked Gnex??? I really need some help
I have no access to any usb jig or jtag repair shops :c

Log from omaps:
Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x47FC00001F4F // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x00001F4F // Product serial numbe
r
eMMC CID MDT = 0x1F // Manufacturing date
eMMC CID CRC = 0x27 // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes

eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)

eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision

eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
Downloading complete
Elapsed time: 0:00.491 (96048 bytes/s)
End loading driver
Downloading
Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
Sending data (131072 bytes) :::::::::::::::::::: [131072]
Downloading complete
Elapsed time: 0:00.273 (480117 bytes/s)
Looking for a driver for 'EMMC'
chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
Downloading driver
EMMC eMMC DRIVER DEINIT COMPLETE
Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x47FC00001F4F // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x00001F4F // Product serial numbe
r
eMMC CID MDT = 0x1F // Manufacturing date
eMMC CID CRC = 0x27 // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes

eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)

eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision

eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
Downloading complete
Elapsed time: 0:00.447 (105503 bytes/s)
End loading driver
Downloading
Downloading 'Targets\Projects\tuna\sbl.img'
Sending data (1835008 bytes) :::::::::::::::::::: [1835008]
Downloading complete
Elapsed time: 0:02.162 (873810 bytes/s)
cold_sw_reset
Elapsed time: 0:09.707
Press any key to continue . . .
 
Slayer_Grim
Old
#2  
Junior Member - OP
Thanks Meter 0
Posts: 3
Join Date: Jun 2014
Reserved
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes