Post Reply Subscribe to Thread Email Thread

Prompt GNex factory reset apparently doesn't write anything and I'm not able to update.

15th March 2014, 08:57 AM |#1  
OP Junior Member
Thanks Meter: 2
11 posts
Join Date:Joined: Nov 2010
Hello, my gnex (maguro) started rebooting frequently (like every 30 seconds). I hope is not an hardware fault and now I'm trying to restore a factory image so I can rule out any custom rom-derived problems.

I'm trying to flash yakju-jwr66y the problem is when I flash the bootloader and radio everyithing is ok but when it reboots to install the rest of the system the bootloader and radio are still not updated!

If I try to update manually the bootloader this is what I get:

wax@pasifae:~/Scaricati/yakju-jwr66y (2)$ fastboot flash bootloader bootloader-maguro-primemd04.img
sending 'bootloader' (2308 KB)...
OKAY [  0.308s]
writing 'bootloader'...
OKAY [  7.971s]
finished. total time: 8.279s
wax@pasifae:~/Scaricati/yakju-jwr66y (2)$ fastboot reboot-bootloader
rebooting into bootloader...
OKAY [  0.006s]
finished. total time: 0.006s
But the bootloader version is still the primemd03! The same goes with the radio.
What is going on?
15th March 2014, 04:01 PM |#2  
mrgnex's Avatar
Senior Member
Flag Vlaardingen
Thanks Meter: 304
1,065 posts
Join Date:Joined: Jan 2013
Probably fried EMMC. Try to lock the bootloader. If its still unlocked your EMMC is fried..

Sent from my Galaxy Nexus using xda app-developers app
16th March 2014, 02:27 PM |#3  
Senior Member
Thanks Meter: 379
2,194 posts
Join Date:Joined: Sep 2010
Donate to Me
Try to fastboot flash system and userdata separately
Post Reply Subscribe to Thread

bootloader, factory reset, galaxy nexus
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes