[RADIOS/HYBRIDS]*UPDATED* 4.0.4 FULL 2/6/2012 PLUS FRIED RADIO Halp!
Radio patch from 4.0.4 update package found on android police. SEE BELOW!
This isnt anything new, but rather combination of what many report to be better of the LTE and CDMA radios. Just a simple repackaging. It appears to be the better of combinations I have tried. Handoff between 3g/4g appears be for my set of 5 phones in various areas around CT, so please no "your wrong " posts.
FLASH IN CWR unless your having issues,.. then follow directions below for Fried Radio.
Hybrid 1 VZW EK5 CDMA(4.0.2) / EK4 LTE(4.0.3)
Updated: New combination for those of you who seem to get worse results with the hybrid 1 package.
Hybrid 2 VZW EK6 CDMA(4.0.3) / EK2 LTE(4.0.2)
If your not cool with "patching" your LTE radio image and want to wait for a full 4.0.4 LTE image try my newest hybrid below. Bootloader update was removed, so no reverting to stock needed!
Hybrid 3 VZW V.FA02 CDMA(4.0.4) / EK4 LTE(4.0.3)
***** Updated 2/6/2012**** NO NEED TO FLASH BACK TO 4.0.2 now!!
For those who wanted the 4.0.4 radios without the bootloader so you DO NOT have to revert to stock rom to take this, here you go. Few things to note.
1.) Im not responsible for anything that happens to your phone as a result of this.
2.) I have tested the packages on the 4 GNEXS I have.
3.) This package includes a FULL CDMA image and a LTE FULL IMAGE... WHICH MEANS... this IS a final radio, Please report feedback but dont be a dick.
4.) NO NEED TO FLASH to 4.0.2 as this is a FULL LTE and CDMA image!
If you get any errors while flashing anyoff the Hybrids or the 4.0.4 radios...no sweat. Pull the batt for a few seconds, boot into fastboot then recovery and go again!
That is all.......
VZW CDMA FULL v.FA02(4.0.4) / LTE FULL FA02(4.0.4) NO BOOTLDR
For those of you who have fried your radios before, never fear. A simple fix is to download the Galaxy Nexus Toolkit v5.1 and put your phone into the fastboot menu.
1.) Download a radio package from either 4.0.2 or 4.0.3 (not 4.0.4 yet)and extract the radio.img and radio-cdma.img to the put_img_files_to_flash_here folder that the toolkit installed to.
2.) Select the option to Boot or Flash IMG files
3.) VERY IMPORTANT!! Follow the prompt and enter in radio-cdma.img first! If you flash LTE radio first, and then CDMA, CDMA will purge the LTE Radio!!!!!
4.) When prompted to change permissions so no, and when prompted to flash another file say yes.
5.) Now enter in radio.img and flash.
Your radios are now recovered. To confirm fastboot should show the 2 radios versions. If it only shows CDMA radio version, then you screwed up! Try again.