Post Reply

[REF][TWEAKS] Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs

OP droidphile

30th November 2011, 03:48 PM   |  #1  
droidphile's Avatar
OP Recognized Contributor
Flag Bangalore
Thanks Meter: 6,958
 
1,064 posts
Join Date:Joined: Jul 2011
Reorganized overflowing Posts to fit into 5 Posts. [Feb 3]

Most of us are flash maniacs, and we do it a lot. But after a kernel flash, we wonder:

Q1. "OK i have flashed this xyz kernel. What're all these governors? How do i know which one is the best for me? How do i tweak them to bias their characters towards Battery-life/Performance/Balance between the Two".

Q2. "What's the fuzz about these modules that comes with the kernel. How do i use them. Are they any good. Is it OK to neglect them?"

Q3. "What roles does an i/o scheduler play? How to choose a reliable i/o scheduler?"

Q4. "Can i have more control on CPU? More info and tweaks on dual core CPU, bus frequency, etc?"

Q5. "Better understanding on impact of different values for basic/advanced parameters in the Kernel Config App, so that i can tweak the settings according to my taste?"


Hope this thread could give you answers for all these questions. We're covering governors, modules, i/o schedulers that comes with Siyah kernel, plus more. That should cover almost all the popular governors/modules/io schedulers! Many people seem to get lost in Kernel dev threads without getting answers about governors and such.

The info in this thread holds good for non-siyah kernel users too. You should find here, info on most of the governors/modules/io schedulers in your kernel if not all.

Thanks To
1) Gokhanmoral for his mighty sweet Siyah Kernel which inspired me to write this thread.
2) Moderators for squeezing in extra posts when i ran out of space to fit everything in only 3 reserved posts.
3) Users/Readers for your warm comments.

POST 1: KERNEL GOVERNORS
POST 2: GOVERNOR TWEAKS
POST 3: LOADABLE KERNEL MODULES
POST 4: I/O SCHEDULERS
POST 5: DUAL CORE CPU Q&A AND TWEAKS
POST 6: CONFIGURE KERNEL AIO APP - GINGERBREAD
POST 7: CONFIGURE KERNEL AIO APP - ICS



1. GOVERNORS

I) MANUAL:

These are the 19 governors we're talking about.

1) Ondemand
2) Ondemandx
3) Conservative
4) Interactive
5) Interactivex
6) Lulzactive
7) Lulzactiveq
8) Smartass
9) SmartassV2
10) Intellidemand
11) Lazy
12) Lagfree
13) Lionheart
14) LionheartX
15) Brazilianwax
16) SavagedZen
17) Userspacce
18) Powersave
19) Performance

NOTE: Info on Samsung's own multi-core aware governor - Pegasusq is here


1) Ondemand:
Default governor in almost all stock kernels. One main goal of the ondemand governor is to switch to max frequency as soon as there is a CPU activity detected to ensure the responsiveness of the system. (You can change this behavior using smooth scaling parameters, refer Siyah tweaks at the end of 3rd post.) Effectively, it uses the CPU busy time as the answer to "how critical is performance right now" question. So Ondemand jumps to maximum frequency when CPU is busy and decreases the frequency gradually when CPU is less loaded/apporaching idle. Even though many of us consider this a reliable governor, it falls short on battery saving and performance on default settings. One potential reason for ondemand governor being not very power efficient is that the governor decide the next target frequency by instant requirement during sampling interval. The instant requirement can response quickly to workload change, but it does not usually reflect workload real CPU usage requirement in a small longer time and it possibly causes frequently change between highest and lowest frequency.

2) Ondemandx:
Basically an ondemand with suspend/wake profiles. This governor is supposed to be a battery friendly ondemand. When screen is off, max frequency is capped at 500 mhz. Even though ondemand is the default governor in many kernel and is considered safe/stable, the support for ondemand/ondemandX depends on CPU capability to do fast frequency switching which are very low latency frequency transitions. I have read somewhere that the performance of ondemand/ondemandx were significantly varying for different i/o schedulers. This is not true for most of the other governors. I personally feel ondemand/ondemandx goes best with SIO I/O scheduler.

3) Conservative:
A slower Ondemand which scales up slowly to save battery. The conservative governor is based on the ondemand governor. It functions like the Ondemand governor by dynamically adjusting frequencies based on processor utilization. However, the conservative governor increases and decreases CPU speed more gradually. Simply put, this governor increases the frequency step by step on CPU load and jumps to lowest frequency on CPU idle. Conservative governor aims to dynamically adjust the CPU frequency to current utilization, without jumping to max frequency. The sampling_down_factor value acts as a negative multiplier of sampling_rate to reduce the frequency that the scheduler samples the CPU utilization. For example, if sampling_rate equal to 20,000 and sampling_down_factor is 2, the governor samples the CPU utilization every 40,000 microseconds.

4) Interactive:
Can be considered a faster ondemand. So more snappier, less battery. Interactive is designed for latency-sensitive, interactive workloads. Instead of sampling at every interval like ondemand, it determines how to scale up when CPU comes out of idle. The governor has the following advantages: 1) More consistent ramping, because existing governors do their CPU load sampling in a workqueue context, but interactive governor does this in a timer context, which gives more consistent CPU load sampling. 2) Higher priority for CPU frequency increase, thus giving the remaining tasks the CPU performance benefit, unlike existing governors which schedule ramp-up work to occur after your performance starved tasks have completed. Interactive It's an intelligent Ondemand because of stability optimizations. Why??
Sampling the CPU load every X ms (like Ondemand) can lead to under-powering the CPU for X ms, leading to dropped frames, stuttering UI, etc. Instead of sampling the CPU at a specified rate, the interactive governor will check whether to scale the CPU frequency up soon after coming out of idle. When the CPU comes out of idle, a timer is configured to fire within 1-2 ticks. If the CPU is very busy between exiting idle and when the timer fires, then we assume the CPU is underpowered and ramp to max frequency.

5) Interactivex:
This is an Interactive governor with a wake profile. More battery friendly than interactive.

6) Lulzactive:
This new find from Tegrak is based on Interactive & Smartass governors and is one of the favorites.
Old Version: When workload is greater than or equal to 60%, the governor scales up CPU to next higher step. When workload is less than 60%, governor scales down CPU to next lower step. When screen is off, frequency is locked to global scaling minimum frequency.
New Version: Three more user configurable parameters: inc_cpu_load, pump_up_step, pump_down_step. Unlike older version, this one gives more control for the user. We can set the threshold at which governor decides to scale up/down. We can also set number of frequency steps to be skipped while polling up and down.
When workload greater than or equal to inc_cpu_load, governor scales CPU pump_up_step steps up. When workload is less than inc_cpu_load, governor scales CPU down pump_down_step steps down.
Example:
Consider
inc_cpu_load=70
pump_up_step=2
pump_down_step=1
If current frequency=200, Every up_sampling_time Us if cpu load >= 70%, cpu is scaled up 2 steps - to 800.
If current frequency =1200, Every down_sampling_time Us if cpu load < 70%, cpu is scaled down 1 step - to 1000.

7) Lulzactiveq:
Lulzactiveq is a modified lulzactive governor authored by XDA member robertobsc and is adapted in Siyah kernel for GS2 and GS3. Lulzactiveq aims to optimize the second version of luzactive from Tegrak by a) providing an extra parameter (dec_cpu_load) to make scaling down more sensible, and b) incorporating hotplug logic to the governor. Luzactiveq is the first ever interactive based governor with hotplugging logic inbuilt (atleast the first of its kind for the exynos platform). When CPU comes out of idle loop and it's time to make a scaling decision, if load >= inc_cpu_load CPU is scaled up (like original luzactiveq) and if load <dec_cpu_load, CPU is scaled down. This possibly eliminates the strict single cut-off frequency for luzactiveq to make CPU scaling decisions. Also, stand hotplug logic runs as a separate thread with the governor so that external hotplugging logic is not required to control hotplug in and out (turn On and Off) CPU cores in multi core devices like GS2 or GS3. Only a multi core aware governor makes real sense on muti-core devices. Lulzactiveq and pegasusq aims to do that.

8) Smartass:
Result of Erasmux rewriting the complete code of interactive governor. Main goal is to optimize battery life without comprising performance. Still, not as battery friendly as smartassV2 since screen-on minimum frequency is greater than frequencies used during screen-off. Smartass would jump up to highest frequency too often as well.

9) SmartassV2:
Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.

10) Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors )
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.

11) Lazy:
This governor from Ezekeel is basically an ondemand with an additional parameter min_time_state to specify the minimum time CPU stays on a frequency before scaling up/down. The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand. Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state on a step overriding sampling interval. Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always select the maximum frequency while the screen is off.

12) Lagfree:
Lagfree is similar to ondemand. Main difference is it's optimization to become more battery friendly. Frequency is gracefully decreased and increased, unlike ondemand which jumps to 100% too often. Lagfree does not skip any frequency step while scaling up or down. Remember that if there's a requirement for sudden burst of power, lagfree can not satisfy that since it has to raise cpu through each higher frequency step from current. Some users report that video playback using lagfree stutters a little.

13) Lionheart:
Lionheart is a conservative-based governor which is based on samsung's update3 source. Tweaks comes from 1) Knzo 2) Morfic. The original idea comes from Netarchy. See here. The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.

To 'experience' Lionheart using conservative, try these tweaks:
sampling_rate:10000 or 20000 or 50000, whichever you feel is safer. (transition latency of the CPU is something below 10ms/10,000uS hence using 10,000 might not be safe).
up_threshold:60
down_threshold:30
freq_step:5
Lionheart goes well with deadline i/o scheduler. When it comes to smoothness (not considering battery drain), a tuned conservative delivers more as compared to a tuned ondemand.

14) LionheartX
LionheartX is based on Lionheart but has a few changes on the tunables and features a suspend profile based on Smartass governor.

15) Brazilianwax:
Similar to smartassV2. More aggressive ramping, so more performance, less battery.

16) SavagedZen:
Another smartassV2 based governor. Achieves good balance between performance & battery as compared to brazilianwax.

17) Userspace:
Instead of automatically determining frequencies, lets user set frequencies.

18) Powersave:
Locks max frequency to min frequency. Can not be used as a screen-on or even screen-off (if scaling min frequency is too low).

19) Performance:
Sets min frequency as max frequency. Use this while benchmarking!

So, Governors can be categorized into 3/4 on a high level:
1.a) Ondemand Based:
Works on "ramp-up on high load" principle. CPU busy-time is taken into consideration for scaling decisions. Members: Ondemand, OndemandX, Intellidemand, Lazy, Lagfree.
1.b) Conservative Based:
Members: Conservative, Lionheart, LionheartX
2) Interactive Based:
Works on "make scaling decision when CPU comes out of idle-loop" principle. Members: Interactive, InteractiveX, Lulzactive, Luzactiveq, Smartass, SmartassV2, Brazilianwax, SavagedZen.
3) Weird Category:
Members: Userspace, Powersave, Performance.

__________________________________________________ __________________________________________________ ____________

II) QUESTION TIME:

Q. "Ok. Enough of explanations. Tell me which governor is for performance and which one is for battery life."
A. Tough question! lulzactive and smartassV2 for a balance between performance and battery. For light weight tasks, lulzactive should be better for battery. And for heavy weight tasks, lulzactive should be better for performance also. To get maximum performance, use a tweaked ondemand or conservative, but never complain about battery. NOTE: It's not so easy to tame luzactive. If you don't know how exactly to do it, stay away from it or you will end up complaining about battery drain!

Q. "Hey, almost forgot. How do i change governors?"
A. Best way is to use an init.d script if your kernel supports it. (echo "governor-name" > /sys/devices/system/cpu/cpu0/cpufreq /scaling_governor) Else use Voltage Control/SetCpu/No Frills/Antuntu CPU Master, etc. Voltage Control has the interfaces for gpu oc/uc/uv and charge-current change if your kernel supports them. Like we guessed, these apps will tell us the active governor too.

Q. "How do i know which governor is best for me?"
A. It depends on what you need and your daily usage pattern. Performance or battery. Better choose a governor that's balanced for battery/performance. Or tweak a governor to give performance an upper-hand as compared to battery. We can always re-charge the phone: In car when off to work, or overnight. But we can not recharge performance! After all, we bought GS2 to enjoy it's sheer power.

Q. "Well i have set my favorite governor as screen-on governor and another one as screen-off governor. Why the hell is the phone not waking up after deep sleep. I need to force-restart the phone by pressing power button for about 10 secs. Is it a sleep-of-death?"
A. Yes it is. Do not use two governors as screen-on & screen-off govs, if they both have an upper frequency limit for screen-off state.
Didn't get it? Examples for Wrong combinations: (screen-on:screen-off):-
ondemandX:smartassV2
Examples for right combinations:-
ondemand:smartassV2, lulzactive:smartassV2

Q. "I can feel slight lags here and there with a governor. For ex: while scrolling through app drawer/vertically scrolling browser, etc. I really love this governor and don't tell me to use another governor. Can i diminish this lag?"
A. Hmm well, you can. Basically what we have to do is make the governor "poll" less often to scale-down cpu. Increase down-sampling-time of your governor (whichever parameter that corresponds to), so that the cpu will stay longer on a frequency before scaling down. This should eliminate the lag.

Q. "Even though i don't have too much uv/oc, once in a while; may be once in two weeks, i experience a freeze/lock/reboot. I'm using governor X. How do i solve this?"
A. Well, a random reboot/freeze once in a while signifies that we're android/galaxy SII enthusiast. If everything go smooth as silk, what's the fun? We could use stock rom/kernel/governor and be happy. A rare reboot or freeze is nothing to worry about. Just restart the phone.

Q. "OK. I want to tweak these governors according to my usage pattern, because i'm not happy with the default behavior of these governors".
A. You can tweak the governors using an init.d script to echo suitable values into:
/sys/devices/system/cpu/cpufreq/name-of-active-governor/name-of-the-paramater-to-tweak
Example:
echo "20000" /sys/devices/system/cpu/cpufreq/lulzactive/up_sample_time

Q. "I'm going to set scaling min freq as 100 mhz because my kernel supports it. Hope there's nothing wrong in doing that."
A. Wait! You may want to stay away from using 100mhz during screen-off or screen-on states for three reasons 1) It seems 100 mhz uses more power than 200 mhz. According to tests, 100 mhz accounted to 1 W / GHz and 200 mhz to 0.7 W / GHz, when both the cores were online. 2) 200 mhz can finish same task faster compared 100 mhz and thus hit deep idle soon. 3) 200 mhz is the 'sweet spot' of frequency in SGS II. ie, the frequency used in the calculations based on the optimal energy to run (Ex: In Milestone it's 550 MHz). So , 'energetically efficient' frequency for our CPU is 200 mhz.

Q. "I want to know is there's anything more i can do to improve battery life. I have already tweaked my governor settings but..."
A. Take my word. Best way is to limit scaling max freq to 800 or 1000 mhz. Sgs2 can do majority of the task with 1000 or 800 as the max. OCing to 1600mhz draws considerably more power than stock 1200mhz or even 1400mhz. Try scaling between 200 and 1000 mhz for a day and feel the difference.

Q. "How to make my device more snappier. I don't care much about batt....err...I do care about battery life, but only in terms of avoiding unwanted power consumption. Device should instantly dance to my tunes."
A. Scale 500 to 1200 during screen-on and 200-500 during screen-off. Use performance tweaked conservative/ondemand(x). No excess power consumption because 1400 and 1600 is out the league. Response will be sweet. And don't worry, minimum of 500 during screen-on will not drain too much battery like you think!


Governor tweaks in Post 2.
Last edited by droidphile; 15th September 2012 at 05:38 PM. Reason: Added LulzactiveQ
The Following 1,618 Users Say Thank You to droidphile For This Useful Post: [ View ]
30th November 2011, 03:48 PM   |  #2  
droidphile's Avatar
OP Recognized Contributor
Flag Bangalore
Thanks Meter: 6,958
 
1,064 posts
Join Date:Joined: Jul 2011
Governor Tweaks
(First post extended here. )

2. SAMPLE GOVERNOR TWEAKS

III) PARAMETERS & TWEAKS:

[Only Ondemand, Conservative, SmartassV2, Lulzactive and Interactive; being the most preferred governors.]

Different governors has different parameters. But it's easy to understand a governor. Ideally, a governor will have:-

1) Sampling Interval/Rate measured in uS by which the polling function determines how often to poll and decide if frequency should be scaled-down or scaled-up. [Some governors will have different sampling time for scaling-up and scaling-down]
2) Thresholds measured in percentage. When CPU load reaches this point, governor scales up or scales down the CPU. [Most of the governors will have down-threshold and up-threshold, for which CPU is scaled down or up respectively.
There are various other parameters/factors too, but all are in someway related to these two parameters.

1.ONDEMAND
[ PARAMETERS ]
i) sampling_rate - Measured in uS , this is how often the kernel look at the CPU usage and make decisions on what to do about the frequency. Higher values means CPU polls less often. For lower frequencies, this could be considered an advantage since it might not jump to next frequency very often, but for higher frequencies, the scale-down time will be increased.
ii) up_threshold - Measured in percentage 1-100, When CPU load reaches this point, governor will scale CPU up. Higher value means less responsiveness and lower values corresponds to more responsiveness at the cost of battery.
iii) powersave_bias - Default value is 0. Setting a higher value will bias the governor towards lower frequency steps. Use this if you want CPU to spend less time on higher frequencies. A better alternative would be to underclock to a lower frequency than using powersave bias.
iv) sampling_down_factor - In the simplest form, sampling_down_factor determines how often CPU should stay at higher frequencies when truly busy. Default behavior is fast switching to lower frequencies (1). Having sampling_down_factor set to 1 makes no changes from existing behavior (for the non-modified ondemand), but having sampling_down_factor set to a value greater than 1 causes it to act as a multiplier for the scheduling interval for re-evaluating the load when the CPU is at its highest clock frequency (which is scaling_max_freq) due to high load. This improves performance by reducing the overhead of load evaluation and helping the CPU stay at its highest clock frequency when it is truly busy, rather than shifting back and forth in speed. This tunable has no effect on behavior at lower frequencies/lower CPU loads.
v) down_differential - This factor indirectly calculate the 'down-threshold' of Ondemand. After completing sampling-down-factor*sampling-rate at max frequency because of high load, governor samples the load again to calculate an estimate of the new target frequency in a way that the lowest frequency will be chosen that would not trigger up_threshold in the next sample. Because triggering up-threshold will again cause CPU to scale up to max frequency. During this choice down_differential is taken into account as a breathing room value. Target frequency is calculated as max_load_freq / (up_threshold - down_differential). The obtained value might be a non-existent value in the freq_table and CPU driver will round it off to a value in freq_table. max_load_freq is the theoretical frequency at which CPU can handle 100% workload. It is usually a value below scaling_max_freq. See this post by AndereiLux for more info.
vi) freq_step - Whenever up-scaling logic is triggered the governor instructs the CPU to raise its frequency by freq_step percentage of max allowed frequency. (max policy * (freq step / 100)). Ex: max policy is 1600 and freq step 21%, it will scale 1600 * 21% = 336. We have a 100MHz grained frequency table so it rounds up to the next 100MHz, hence 336 becomes 400. So say we're idling at 200MHz and the up-scaling logic gets triggered with the above settings, the next frequency will be 600MHz. Note that freq_step and smooth_scaling does pretty much the same thing.
[ SAMPLE TWEAKS ]
i) For battery:-

To bias ondemand towards battery saving, set high up-thresholds and higher sampling-rate. This way, governor polls less often and scales up less often.
Code:
echo "95" /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
echo "120000" > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
echo "1" > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
echo "5" > /sys/devices/system/cpu/cpufreq/ondemand/down_differential
echo "10" > /sys/devices/system/cpu/cpufreq/ondemand/freq_step
ii) For performance:-

To bias ondemand towards performance, set low up-thresholds and lower sampling-rate. This way, governor polls more often and scales up quite often.
Code:
echo "70" > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
echo "50000" > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
echo "2" > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
echo "15" > /sys/devices/system/cpu/cpufreq/ondemand/down_differential
echo "50" > /sys/devices/system/cpu/cpufreq/ondemand/freq_step

2.LULZACTIVE
1. Initial Version:-
[ PARAMETERS ]
i) down_sampling_time - Sampling time to scale cpu down.
ii) up_sampling_time - Sampling time to scale cpu up.
[ SAMPLE TWEAKS ]
Unfortunately, the initial version of lulzactive doesn't give user much control on it's behavior. We can only control how often cpu should scale up and scale down. Use higher down_sampling_time if you experience lag while scrolling through browser, app drawer, etc. Better keep the default up_sampling time (24000) unchanged. And make down_sampling proportional to up_sampling. Like 2x24000=48,000 or 3x24000=72000.
2. Second Version:-
[ PARAMETERS ]
i) inc_cpu_load - In previous version, this was 'hard-coded' to 60. Now it's user-configurable. The frequency at which governor scales CPU up/down. Load < inc_cpu_load: cpu scaled down. Load >= inc_cpu_load: cpu scaled up
ii) pump_up_step - No of scale up steps when load >= inc_cpu_load
iii) pump_down_step - No of scale down steps when load < inc_cpu_load
iv) screen_off_min_step - Steps in frequency table to be used when screen-off. Example: If available freqs are 1600 1400 1200 1000 800 500 200 100 (L0 to L7) and screen_off_min_step=5 then 100,200 and 500 (L5 to L7) will be used during screen-off depending on the demand.
v) up_sample_time - same as initial version. (Allowed values 10,000 to 50,000)
vi) down_sample_time - same as older version. (Allowed values 10,000 to 100,000)
[ SAMPLE TWEAKS ]
i) For battery:-
Code:
echo "90" > /sys/devices/system/cpu/cpufreq/lulzactive/inc_cpu_load
echo "1" > /sys/devices/system/cpu/cpufreq/lulzactive/pump_up_step
echo "2" > /sys/devices/system/cpu/cpufreq/lulzactive/pump_down_step
echo "50000" > /sys/devices/system/cpu/cpufreq/lulzactive/up_sample_time
echo "40000" > /sys/devices/system/cpu/cpufreq/lulzactive/down_sample_time
echo "5" > /sys/devices/system/cpu/cpufreq/lulzactive/screen_off_min_step
This tweak cause lulzactive gradually scale up CPU and rapidly scale down on low load.
ii) For performance:-
Code:
echo "60" > /sys/devices/system/cpu/cpufreq/lulzactive/inc_cpu_load
echo "4" > /sys/devices/system/cpu/cpufreq/lulzactive/pump_up_step
echo "1" > /sys/devices/system/cpu/cpufreq/lulzactive/pump_down_step
echo "10000" > /sys/devices/system/cpu/cpufreq/lulzactive/up_sample_time
echo "70000" > /sys/devices/system/cpu/cpufreq/lulzactive/down_sample_time
echo "5" > /sys/devices/system/cpu/cpufreq/lulzactive/screen_off_min_step
This tweak cause lulzactive scale up CPU rapidly, polling often and scale down gradually.
iii) For balanced-performance:-
Code:
echo "90" > /sys/devices/system/cpu/cpufreq/lulzactive/inc_cpu_load
echo "4" > /sys/devices/system/cpu/cpufreq/lulzactive/pump_up_step
echo "1" > /sys/devices/system/cpu/cpufreq/lulzactive/pump_down_step
echo "10000" > /sys/devices/system/cpu/cpufreq/lulzactive/up_sample_time
echo "40000" > /sys/devices/system/cpu/cpufreq/lulzactive/down_sample_time
echo "5" > /sys/devices/system/cpu/cpufreq/lulzactive/screen_off_min_step
This tweak cause lulzactive to poll more often and scale up 4 steps above current frequency, but only at 90% load. CPU is scaled down normally.
note: If you're lazy to use a script, use lulzactive app from market to tweak the governor. https://market.android.com/details?i...rak.lulzactive

3.SMARTASSV2
[ PARAMETERS ]
i) awake_ideal_freq - The frequency until which CPU is scaled up rapidly on screen-awake (from sleep). Thereafter, scaling up is less aggressive.
ii) sleep_ideal_freq - The frequency until which CPU is scaled down rapidly when screen is turned off. Thereafter, scaling down is less aggressive.
iii) up_rate_us - The minimum amount of time to spend at a frequency before we can ramp up. (Ignored below awake-ideal frequency since governor needs to rapidly scale up to awake_ideal_freq when below it)
iv) down_rate_us - The minimum amount of time to spend at a frequency before we can ramp down. (Ignored above sleep-ideal frequency since governor needs to rapidly scale down to sleep_ideal_freq when above it)
v) max_cpu_load - Same as up_threshold in other governors.
vi) min_cpu_load - Same as down_threshold in other governors.
vii) ramp_down_step - Frequency delta when ramping down below the ideal frequency. Zero disables and will calculate ramp down according to load heuristic. When above the ideal frequency we always ramp down to the ideal freq.
viii) ramp_up_step - Frequency when ramping up above the ideal frequency. Zero disables and causes to always jump straight to max frequency. When below the ideal frequency we always ramp up to the ideal freq.
ix) sleep_wakeup_freq - The frequency to set when waking up from sleep. When sleep_ideal_freq=0 this will have no effect.
[ SAMPLE TWEAKS ]
i) For battery:-
Code:
echo "500000" > /sys/devices/system/cpu/cpufreq/smartass/awake_ideal_freq;
echo "200000" > /sys/devices/system/cpu/cpufreq/smartass/sleep_ideal_freq;
echo "500000" > /sys/devices/system/cpu/cpufreq/smartass/sleep_wakeup_freq
echo "85" > /sys/devices/system/cpu/cpufreq/smartass/max_cpu_load;
echo "70" > /sys/devices/system/cpu/cpufreq/smartass/min_cpu_load;
echo "200000" > /sys/devices/system/cpu/cpufreq/smartass/ramp_up_step;
echo "200000" > /sys/devices/system/cpu/cpufreq/smartass/ramp_down_step;
echo "48000" > /sys/devices/system/cpu/cpufreq/smartass/up_rate_us
echo "49000" > /sys/devices/system/cpu/cpufreq/smartass/down_rate_us
ii) For performance:-
Code:
echo "800000" > /sys/devices/system/cpu/cpufreq/smartass/awake_ideal_freq;
echo "200000" > /sys/devices/system/cpu/cpufreq/smartass/sleep_ideal_freq;
echo "800000" > /sys/devices/system/cpu/cpufreq/smartass/sleep_wakeup_freq
echo "75" > /sys/devices/system/cpu/cpufreq/smartass/max_cpu_load;
echo "45" > /sys/devices/system/cpu/cpufreq/smartass/min_cpu_load;
echo "0" > /sys/devices/system/cpu/cpufreq/smartass/ramp_up_step;
echo "0" > /sys/devices/system/cpu/cpufreq/smartass/ramp_down_step;
echo "24000" > /sys/devices/system/cpu/cpufreq/smartass/up_rate_us
echo "99000" > /sys/devices/system/cpu/cpufreq/smartass/down_rate_us

4.CONSERVATIVE
[ PARAMETERS ]
i) down_threshold, ii) up_threshold, iii) sampling_down_factor, iv) sampling_rate - Refer above governors.
v) freq_step - Defines how much (as a percentage of the maximum CPU speed) the conservative governor will increase the CPU speed by each time the CPU load reaches the Up Threshold.
[ SAMPLE TWEAKS ]
i) For battery:- [Set freq_step to lower value to make conservative governor conserve more battery]
Code:
echo "95" > /sys/devices/system/cpu/cpufreq/conservative/up_threshold
echo "120000" > /sys/devices/system/cpu/cpufreq/conservative/sampling_rate
echo "1" > /sys/devices/system/cpu/cpufreq/conservative/sampling_down_factor
echo "40" > /sys/devices/system/cpu/cpufreq/conservative/down_threshold
echo "10" > /sys/devices/system/cpu/cpufreq/conservative/freq_step
ii) For performance:- [Isn't it ironical that we are tuning Conservative to achieve blazing performance!]
Code:
echo "60" > /sys/devices/system/cpu/cpufreq/conservative/up_threshold
echo "40000" > /sys/devices/system/cpu/cpufreq/conservative/sampling_rate
echo "5" > /sys/devices/system/cpu/cpufreq/conservative/sampling_down_factor
echo "20" > /sys/devices/system/cpu/cpufreq/conservative/down_threshold
echo "25" > /sys/devices/system/cpu/cpufreq/conservative/freq_step

5.INTERACTIVE
[ PARAMETERS ]
i) hispeed_freq - Hi speed to bump to from lo speed when load burst. (Default value is scaling max freq)
ii) go_hispeed_load - Go to hi speed when CPU load at or above this value. (Similar to Up-Threshold in other governors)
iii) min_sample_time - The minimum amount of time to spend at a frequency before we can ramp down. (Sounds like Lazy governor?!)
iv) timer_rate - The sample rate of the timer used to increase frequency.
[ SAMPLE TWEAKS ]
i) For battery:- [Interactive and battery?!! I'm capping the highspeed_freq in the hope of saving battery]
Code:
echo "95" > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
echo "1000000" > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
echo "10000" > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
echo "40000" > /sys/devices/system/cpu/cpufreq/interactive/timer_rate
ii) For performance:- [Assuming your scaling_max_freq is equal to or above 1400 mhz)
Code:
echo "80" > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
echo "1400000" > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
echo "40000" > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
echo "20000" > /sys/devices/system/cpu/cpufreq/interactive/timer_rate


IV) GUIDE TO INIT.D SCRIPTS

When I'm writing tweaks all over the thread, it's unfair if i don't cover a small guide to scripts since there are people who does not have any experience or knowledge on init.d scripts. So here are the "WHATs" and "HOWs".

If you're already familiar with init.d scripts, please skip this part.

Android boot-up process can be divided into three parts on a high-level.
1) First stage bootloader runs.
2) Kernel boots and it loads various drivers, prepares hardware and so on.
3) User space programs are invoked. It is in this stage where init.d scripts are executed. (Also various apps and daemons are started to prepare the rom)
  • Most of the custom kernels supports init.d scripts. Some developers choose to run init.d scripts whose names starts with an "S". Others choose to execute all the scripts inside init.d directory.
  • Init.d script are to be placed inside /system/etc/init.d directory (or /etc/init.d which is a symbolic link to /system/etc/init.d)
  • Order of executing init.d scripts are in the increasing order of ASCII values that corresponds to their names. For ex: among two scripts named, "Ascript1" and "Bscript2", "Ascript1" will be executed first. If there is a particular reason that we need one script to be executed before another, make sure you name it properly.

GUIDE:
  • First line of any script should invoke a compatible shell/interpreter which is responsible for executing the rest of the script. The compatible shell may be the default shell "sh" or "busybox".
  • So first line of any script should look like this:
    #!/sbin/busybox sh or #!/system/xbin/busybox sh [The location of busybox may vary with roms/devices. So please check with root explorer, busybox location and change the path accordingly]
    OR
    #!/system/bin/sh
  • From next line, the actual script starts.
    ex: echo "200000" > /sys/devices/system/cpu/spu0cpufreq/scaling_max_freq
  • Make sure there are no syntax errors first, (also check for logical errors)
  • Most common error is to use a windows-based editor which leaves an extra space at the end of each line or leaves an invisible invalid character when you press carriage return (ENTER key).
  • So do not use editors such as notepad or wordpad to create scripts. Use Notepad++, a free GNU editor.
  • After finishing the script, check for extra spaces at the beginning and end of each line in the script. If found, remove them.
  • Save the script without any extensions (Yes, not even .sh extension).
  • Use adb or rootexplorer to push the script into /etc/init.d and set permissions.
    Read this beautiful guide on how to install SDK and setup ADB without any hassle on your PC.
  • Using root explorer, copy the script to /etc/init.d and set permissions:
    owner : rwx
    group : r_x
    others : r_x
  • Download script manager from market, use it to run the script as root by checking the skull symbol. This is only to check the script for any errors. If exit code= 0, script executed successfully. From now on, your script will be automatically executed on every reboot. But if script manager shows errors, again edit the script (using notepad++ in your PC or using script manager editor itself from your phone), fix the errors and execute again. Repeat this until script is error-free. Remember once again: "A single extra space at the end of a line is a syntax error and script will fail to execute the rest of the lines."
  • To add comments you can use "#"

    Sample Script:
    Code:
    #!/sbin/busybox sh
    
    #No of values echoed to freq table and uvmv table should match the no of steps in your kernel
    echo "1600 1400 1200 1000 800 500 200 100" > /sys/devices/system/cpu/cpu0/cpufreq/freq_table
    echo  "1425 1325 1275 1175 1075 975 950 950"> /sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table
    echo "200" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
    echo "1200" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
    echo "ondemandx" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
To Do:

1) Sample SmartassV2 gov tweaks - DONE
2) Sample Interactive gov tweaks - DONE
3) Technical explanation on working of popular governors by the aid of parameters. - Half done, scattered along Posts
4) More questions in Question Time section - IN PROGRESS
Last edited by droidphile; 27th November 2012 at 03:48 PM. Reason: added freq_step for ondemand
The Following 606 Users Say Thank You to droidphile For This Useful Post: [ View ]
30th November 2011, 03:49 PM   |  #3  
droidphile's Avatar
OP Recognized Contributor
Flag Bangalore
Thanks Meter: 6,958
 
1,064 posts
Join Date:Joined: Jul 2011
Post Modules
3. MODULES

A loadable kernel module is an object that contains some code to extend your kernel. Modules serves various type of purposes like support for new hardwares, filesystems, and system calls. It is probable that once a new module is inserted, it might cause minor fragmentation in kernel resulting in a minor performance penalty. Mostly, not noticeable.
We might ask "ok, if kernel modules are so amazing, why not add them all into the kernel code instead of asking us to load them". Well, the advantage to LKMs is that you can minimize the memory footprint for a kernel, loading only those elements that are needed.

You can find all the modules in /lib/modules. (With extension .ko = Kernel Object).

To avail a module, you need to install/insert it by:
Code:
insmod /lib/modules/module-name.ko
Put the line in an init.d script to load the module(s) on every boot.

To view the list of modules that are loaded by default, use:
Code:
lsmod
To unload/remove a module (that has been loaded):
Code:
rmmod "modulename"
1) bthid.ko* - BlueTooth Human Interface Device

Signifies: Bluetooth
Bthid is one of the bluetooth profiles. The module provides support for devices such as bluetooth mice, joysticks,keyboards,etc. It uses a low latency link with low power requirement to achieve the above mentioned.

2) cifs.ko - Common Internet File System

Signifies: Network Share
Successor to the SMB (Server Message Block) protocol, this protocol is supported by windows servers, samba, etc. The module is responsible for managing your network shares. It is used to mount/unmount network file resources on to your device. If special characters are not properly read/displayed, download and use nls_utf8.ko module for UTF-8 character support.

3) fuse.ko* - File System in Userspace

Signifies: File System
The module let the users create own filesystems without editing kernel code. Fuse module act as a bridge between filesystem code running in the userspace and kernel interface. The module is often used in our devices to support ntfs/ntfs-3g filesystem for mounting ntfs formatted hard drives and pen drives.

4) cuse.ko - Character Devices in User Space

Signifies: Audio Proxying
CUSE is an extension of FUSE allowing character devices to be implemented in userspace. One of the prime motivation for developing cuse is to provide a better support for Open Sound System or OSS. Except for initialization sequence and creation of character device instead of a mount, CUSE isn't very different from FUSE. CUSE is used for tasks like proxying OSS audio from OSS apps to an audio system.

5) dhd.ko - Dongle Host Driver

Signifies: Wifi
This module (from broadcom) is the wifi kernel module/wireless driver, and is responsible for wifi tethering, and such.

6) ftdi_sio.ko - Future Technology Devices International - Serial I/O

Signifies: USB Serial Devices
The module is required to connect an embedded device to our device using FTDI USB-serial converter. The embedded device will be an ftdi chipset based device. Devices like an USB-RFID reader could be connected.

7) usbserial.ko - USB Serial

Signifies: USB Serial Modems
This module is often used along with ftdi_sio module. It is the usbserial-generic interface for linux platform. The module is used to detect and use devices such as usb serial modems.

8) gspca_main.ko - GSPCA Main Driver

Signifies: Webcams
This module is used to install gspca based web camera in our device. The module is the driver that's responsible for detecting and functioning of gspca based webcams.

9) hfs.ko - Hierarchical File System

Signifies: Mac Filesystem
This module is the driver to support HFS aka Mac OS Standard file system. Try mount -t hfs "/source" "/destination" to mount. Also give USB Mass Storage Watcher App from market a try, to skip commands and mount via GUI.

10) hfsplus.ko - Hierarchical File System Plus

Signifies: Mac Filesystem
This module acts as the driver for HFS+ aka Mac OS Extended file system. HFS+ is one of the formats found in iPods. Use mount -t hfsplus "/source" "/destination" for mounting drives.

11) j4fs.ko* - Jong Jang Jintae Jongmin File System

Signifies: File System
J4fs is a filesystem based on LFS (Linear File Store). The bootlogo and some misc files in our device, mounted in /mnt/.lfs is formatted as j4fs filesystem by default.
Please do not mess with .lfs folder!

12) ld9040_voodoo.ko* - LD9040 AMOLED Driver

Signifies: Voodoo Color
Module/driver for voodoo color/screen tuning support for our device. Let's wait patiently until supercurio comes out with a legendary app to have full control on our amoled display.

13) scsi_wait_scan.ko - Small Computer System Interface Wait Scan

Signifies: Waiting During Booting
scsi_scan_wait is responsible to wait until all the asynchronous scans are complete. It will wait after all root SCSI drivers have finished scanning their busses. Note that use of this module can increase your bootup time.

14) Si4709_driver.ko* - Si4709 FM Radio Driver

Signifies: FM Radio
Si4709 is the fm radio receiver driver. Module is loaded by default by Siyah. If there are issues with fm radio in aosp roms, try inserting this module.

15) vibrator.ko* - Vibrate Sensation on Touchsense

Signifies: Haptic feedback
This module from immersion corporation is responsible for haptic feedback. It senses touch as a request and sends back vibration as response. Try inserting this module if haptic feedback not working on aosp roms.

16) logger.ko - Logger for Android

Signifies: Logging/Debugging
Loggers are used to log records to a variety of destinations such as log files or the console. Install this module to enable logging, if logging is disabled in your kernel by default. Logging is used to generate logcats (for debugging purpose), dmesgs (message buffer of the kernel), for proper functioning of app protectors, etc.

17) mc1n2_voodoo.ko - mc1n2 Voodoo Sound Driver

Signifies: Voodoo Sound
Module/driver for Exynos Yamaha audio hardware tweaks. Provides sysfs interface for HP gain and Aout. This driver provides support for supercurio's Voodoo Louder app.

18-25) cpufreq_ brazilianwax.ko, cpufreq_ interactive.ko, cpufreq_ interactivex.ko, cpufreq_ lazy.ko, ondemandX.ko, cpufreq_ powersave.ko, cpufreq_ savagedzen.ko, cpufreq_ userspace.ko

Insert these module(s) to avail your favorite governor which are not loaded by default.

*Modules preloaded in Siyah by default.


Q&A

Q. "I can not find a module that i need to use with the current release of my kernel. Can i use the module downloaded from internet?"
A. Module should be binary compatible with the kernel version. So even if the module was one that came with an older version of the kernel, it's probable that the compatibility is lost.

Q. "I feel there could be some advantage if i remove modules which is no use for me, but they're loaded by kernel during boot-up. What can i do?"
A. Put "rmmod name-of-module" in one of your init.d script, so that it's uninstalled on every boot-up. After booting if you need to use the module, you can insmod it. Ex: rmmod Si4709_driver.ko. (If you don't use FM radio)
Last edited by droidphile; 21st December 2012 at 05:02 PM. Reason: Re-organize Posts
The Following 420 Users Say Thank You to droidphile For This Useful Post: [ View ]
30th November 2011, 03:49 PM   |  #4  
droidphile's Avatar
OP Recognized Contributor
Flag Bangalore
Thanks Meter: 6,958
 
1,064 posts
Join Date:Joined: Jul 2011
I/o schedulers
4. I/O SCHEDULERS

Q. "What purposes does an i/o scheduler serve?"
A.
  • Minimize hard disk seek latency.
  • Prioritize I/O requests from processes.
  • Allocate disk bandwidth for running processes.
  • Guarantee that certain requests will be served before a deadline.

So in the simplest of simplest form: Kernel controls the disk access using I/O Scheduler.

Q. "What goals every I/O scheduler tries to balance?"
A.
  • Fairness (let every process have its share of the access to disk)
  • Performance (try to serve requests close to current disk head position first, because seeking there is fastest)
  • Real-time (guarantee that a request is serviced in a given time)

Q. "Description, advantages, disadvantages of each I/O Scheduler?"
A.

1) Noop

Inserts all the incoming I/O requests to a First In First Out queue and implements request merging. Best used with storage devices that does not depend on mechanical movement to access data (yes, like our flash drives). Advantage here is that flash drives does not require reordering of multiple I/O requests unlike in normal hard drives.

Advantages:
  • Serves I/O requests with least number of cpu cycles. (Battery friendly?)
  • Best for flash drives since there is no seeking penalty.
  • Good throughput on db systems.
Disadvantages:
  • Reduction in number of cpu cycles used is proportional to drop in performance.

2) Deadline

Goal is to minimize I/O latency or starvation of a request. The same is achieved by round robin policy to be fair among multiple I/O requests. Five queues are aggressively used to reorder incoming requests.

Advantages:
  • Nearly a real time scheduler.
  • Excels in reducing latency of any given single I/O.
  • Best scheduler for database access and queries.
  • Bandwidth requirement of a process - what percentage of CPU it needs, is easily calculated.
  • Like noop, a good scheduler for solid state/flash drives.
Disadvantages:
  • When system is overloaded, set of processes that may miss deadline is largely unpredictable.

3) CFQ

Completely Fair Queuing scheduler maintains a scalable per-process I/O queue and attempts to distribute the available I/O bandwidth equally among all I/O requests. Each per-process queue contains synchronous requests from processes. Time slice allocated for each queue depends on the priority of the 'parent' process. V2 of CFQ has some fixes which solves process' i/o starvation and some small backward seeks in the hope of improving responsiveness.

Advantages:
  • Considered to deliver a balanced i/o performance.
  • Easiest to tune.
  • Excels on multiprocessor systems.
  • Best database system performance after deadline.
Disadvantages:
  • Some users report media scanning takes longest to complete using CFQ. This could be because of the property that since the bandwidth is equally distributed to all i/o operations during boot-up, media scanning is not given any special priority.
  • Jitter (worst-case-delay) exhibited can sometimes be high, because of the number of tasks competing for the disk.

4) BFQ

Instead of time slices allocation by CFQ, BFQ assigns budgets. Disk is granted to an active process until it's budget (number of sectors) expires. BFQ assigns high budgets to non-read tasks. Budget assigned to a process varies over time as a function of it's behavior.

Advantages:
  • Believed to be very good for usb data transfer rate.
  • Believed to be the best scheduler for HD video recording and video streaming. (because of less jitter as compared to CFQ and others)
  • Considered an accurate i/o scheduler.
  • Achieves about 30% more throughput than CFQ on most workloads.
Disadvantages:
  • Not the best scheduler for benchmarking.
  • Higher budget assigned to a process can affect interactivity and increased latency.

5) SIO

Simple I/O scheduler aims to keep minimum overhead to achieve low latency to serve I/O requests. No priority quesues concepts, but only basic merging. Sio is a mix between noop & deadline. No reordering or sorting of requests.

Advantages:
  • Simple, so reliable.
  • Minimized starvation of requests.
Disadvantages:
  • Slow random-read speeds on flash drives, compared to other schedulers.
  • Sequential-read speeds on flash drives also not so good.

6) V(R)

Unlike other schedulers, synchronous and asynchronous requests are not treated separately, instead a deadline is imposed for fairness. The next request to be served is based on it's distance from last request.

Advantages:
  • May be best for benchmarking because at the peak of it's 'form' VR performs best.
I/O Schedulers


Disadvantages:
  • Performance fluctuation results in below-average performance at times.
  • Least reliable/most unstable.

7) Anticipatory

Based on two facts
i) Disk seeks are really slow.
ii) Write operations can happen whenever, but there is always some process waiting for read operation.

So anticipatory prioritize read operations over write. It anticipates synchronous read operations.

Advantages:
  • Read requests from processes are never starved.
  • As good as noop for read-performance on flash drives.
Disadvantages:
  • 'Guess works' might not be always reliable.
  • Reduced write-performance on high performance disks.

Q. "Best I/O Scheduler?"
A.There is nothing called "best" i/o scheduler. Depending on your usage environment and tasks/apps been run, use different schedulers. That's the best i can suggest.
However, considering the overall performance, battery, reliability and low latency, it is believed that
SIO > Noop > Deadline > VR > BFQ > CFQ, given all schedulers are tweaked and the storage used is a flash device.

Q. "How do i change I/O schedulers?"
Voltage Control or No Frills from market.
Or init.d script:
echo "scheduler-name" > /sys/block/mmcblk0/queue/scheduler
Last edited by droidphile; 21st December 2012 at 05:28 PM. Reason: more info
The Following 261 Users Say Thank You to droidphile For This Useful Post: [ View ]
30th November 2011, 03:49 PM   |  #5  
droidphile's Avatar
OP Recognized Contributor
Flag Bangalore
Thanks Meter: 6,958
 
1,064 posts
Join Date:Joined: Jul 2011
Q&A and Tweaks
5. DUAL CORE CPU Q&A and TWEAKS

Q&A on parameters and factors that control the performance, throughput and battery-life delivered by GS2's dual-core CPU, and some CPU tweaks

Q. "What is the basic hardware of GS2 that make all of us enjoy this phone so much and boast about benchmark scores to office-mates and friends?"
A.
Processor: ARM Cortex-A9 MPCore processor on Exynos 4210 SoC (System on a Chip - ICs where all components are integrated into a single chip) and 45nm semi-conductor technology. Exynos 4210 is supposed to give 6.4GB/s memory bandwidth for heavy-weight ops such as full hd video encoding.
GPU: ARM Mali-400
Memory: LPDDR2 (may be DDR3)

Q. "What is the significance of bus frequency?"
A. Bus speed at its simplest form determines how fast the data should travel to and from memory. Memory throughput is directly proportional to bus frequency. In tasks that includes small amount of work on every element in a data sets, lower bus speed means longer the CPU has to wait for data to arrive from memory. Because, CPU spends only little time on each of these elements, and a slow bus cannot catch-up.
Advanced Micro-controller Bus Architecture (AMBA) is used as the on-chip bus in system-on-a-chip designs, like our device.

Q. "What is modifying bus frequency? How do I do it? Advantages?"
A. Stock behavior is dynamic bus frequency scaling, where in operating bus speed is dynamically calculated for each CPU frequency depending on the application/process’s requirement. We can modify this behavior by setting static bus frequency scaling, specifying at what bus speed should each CPU frequency operate. Three values/levels are possible.
0 – 400 mhz
1 – 266 mhz
2 – 133 mhz

Sample bus frequency modification:
echo "0 0 0 1 1 1 2 2" > /sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
echo "enabled" > /sys/devices/system/cpu/cpu0/cpufreq/busfreq_static

This means for first three higher CPU frequency steps, 400 mhz bus will be used.
Next three, 266 mhz
And last two, 133 mhz

Advantages of bus frequency modification: i) Saves battery by using low bus speeds on low frequencies and ii) Prevent overheating.

Q. "I experience some lags sometimes while playing HD videos or playing heavy 3d games using static bus frequencies. Why?"
A. HD videos and some games require a minimum of 400/266 mhz bus irrespective of the CPU frequencies being used during the run. To resolve, set higer bus for 500 mhz and higher frequencies or simply disable static bus frequency scaling to switch to default.
echo "disabled" > /sys/devices/system/cpu/cpu0/cpufreq/busfreq_static

Q. "Our phone CPU has two cores. How are they utilized? Are the two cores ON all the time?"
A. The stock behavior is Dynamic Hot Plug Mode where depending on the load, the second core is turned on. If the load can be handled by a single core, the second core is turned off dynamically. This behavior can be controlled by using Tegrak Second Core app from market if your kernel supports it. (Siyah, Lulz,etc supports this). Using this app you can set three modes :-
Dynamic Hot Plug Mode: Default mode. Second core is kicked in depending on the load, and kicked out when first core can handle the load alone.
Single Core Mode: Irrespective of the load, only first core is used always. This can lead to increased battery, but reduced performance.
Dual Core Mode: Irrespective of low loads, both the cores are always active. Increased performance, but reduced battery.

Recommendation: Use the stock hotplug mode during normal use. Switch to dual core mode only for benchmarking or playing some heavy 3d games.

Q. "OK, I'm using hot plug mode, still i want to control how often the second core kicks in. To make it more aggressive/more mild depending on my usage."
A. You can set UP & LOW thresholds for second core in Screen-On and Screen-Off states.
Examples:
echo "70" > /sys/module/pm_hotplug/parameters/loadh
echo "25" > /sys/module/pm_hotplug/parameters/loadl
echo "90" > /sys/module/pm_hotplug/parameters/loadh_scroff
echo "35" > /sys/module/pm_hotplug/parameters/loadl_scroff

As you can see, when load > 70% second core becomes active and when load drops below 25%, second core is turned off.
During screen off, these values are 90 & 35 respectively. This helps in reducing unwanted kick-ins of second during screen-off state when music is playing, downloading, etc.

Q. "Like governors, is there a sampling rate/interval also at which the load on CPU is checked for crossing thresholds to turn second core ON?"
A. Yes there is. But it is set at kernel level in most kernels and can not be controlled at user level. Like you guessed, higher sampling rate could cause core 2 to kick in less often and thus save a little battery. In Siyah kernel though, these thresholds are configurable.

Q. "Advantages/Disadvantages of switching to Single Core/Dual Core modes?
A. Using only single core can save some battery, but can have some adverse effects too if there are some heavy tasks that require both cores too often: 3d games, full hd videos, etc. So use it wisely.
Using dual core mode can reduce latency by a tiny bit on high loads, as compared to hot plugging. But hot plugging is intelligent enough to turn second core ON really fast when load demands it. Only first core (cpu0) can enter deep-idle (LPA), so using dual core mode in an idle system cause unwanted excess-power consumption.
Recommendation: Use Hot Plugging and tune thresholds (like mentioned above) for a better experience.

Q. "What are these modes: IDLE, LPA and AFTR?"
A. Between screen off and deep sleep states, there are some idle modes supported by cpuidle driver. They are IDLE aka Normal Idle, LPA aka Deep Idle and AFTR aka ARM Off Top Running. Race to idle by CPU is implemented for power management.

In IDLE state, CPU is not clocked anymore, but no hardware is powered down.

In deep idle (LPA),a state after IDLE, again, the cpu is not clocked anymore like we guessed but some parts of hardware are powered down. Deep idle brings in real power savings and there is no need of putting a hard limit to frequency during screen-off; using a screen-off profile. (Good practice is to use a governor with built in screen off profile, than using an user-configured screen-off profile by putting a hard limit on frequency). Deep idle is not used when device is entering deep sleep and also when device is woken from suspend/deep sleep. While entering/exiting DEEP IDLE, CPU is set statically to SLEEP_FREQ and is not clocked below or above until it exits this state.

AFTR is a patch to support Top=Off mode for deep idle. Level 2 cache keeps it data during this mode.

We can have IDLE or AFTR modes with LPA enabled or disabled. (Obviously it is not possible to have IDLE and AFTR together)
Values:
0: IDLE
1: AFTR
2: IDLE+LPA
3: AFTR+LPA

Q. "What idle modes are recommended for power saving? How do i change it"?
A. Recommended for power saving is to enable AFTR and LPA, ie value 3
Example:
echo "3" > /sys/module/cpuidle/parameters/enable_mask

Q. "What is sched_mc?"
A. Linaro team invented sched_mc or Schedule Multi Core to make process scheduling multi-core aware. ie, utilize both cores wisely to save power and balance performance. Even though sched_mc is sort of an alternative to cpu hot plugging, we can use sched_mc with the default hot plug mode.

Possible Values:
0 : No power saving load balance, default in our exynos4210 Soc.
1 : Fill one thread/core/package first for long running threads. In our single-CPU dual-core device, multithreading does not come into picture, so load balancing is almost redundant to hotplugging.
2 : Also bias task wake-ups to semi-idle CPU package for power savings. (Bias new tasks to cpu1 if cpu0 is mostly filled with running tasks). This is 'overloading' CPU0 first.

Q. "What value is recommended for sched_mc?"
A. 1) If you find advantages to sched_mc, use sched_mc=1 for a possible battery saving. Anyhow since load-balancing is reduntant on hotplugging, it may not have any advantage on exynos chip.
2) For performance use 2. But do remember that loading CPU0 and leaving CPU1 can not do justice to hitting deep idle states sooner since second core can not enter deep idle. So extra performance or no performance, value 2 will drain some more battery, in the context of delayed didle.
3) To do justice to hotplugging, use value 0.
Example:
echo "0" /sys/devices/system/cpu/sched_mc_power_savings.

Q. "What is MALI aggressive policy on GPU?"
A. Mali aggressive scaling policy is simply lowering the up-threshold of GPU so that GPU doesn't jump to second frequency step too often. This makes more sense if lower step is under-clocked. In one release of Siyah, the threshold was changed to 55 from default 65.

Q. "What is tree rcu, fast nohz, jrcu?"
A. Read-Copy Update (RCU) is a synchronization mechanism added to Linux kernel. RCU improves scalability by allowing readers to execute concurrently with writers.

Tree RCU is a new implementation of original classic RCU to achieve more scalability as the number of CPUs increase. Tree RCU fixes a performance bug in classic RCU that results in massive lock contention on the internal RCU lock on systems with large number of CPUs.

Fast NoHz is an optimized version of the traditional Tree RCU. Many new kernels are using the Tickless NoHz design. This RCU is tailored and designed to work with the new NoHz kernel system.

JRCU mechanism in its simplest form, runs batch operations from a single CPU relieving other CPUs from this periodic responsibility. This is important for those real-time applications requiring full use of dedicated CPUs. For our dual core single CPU, JRCU can conflict with hot-plugging, hence we will have tree rcu (with or without CONFIG_RCU_FAST_NO_HZ) in our kernels.

Q. "What are SLAB, SLUB, SLQB?"
A. They're three memory allocation mechanisms.

Slab allocation is a memory management mechanism intended for the efficient memory allocation of kernel objects which displays the desirable property of eliminating fragmentation caused by allocations and de-allocations. SLAB is used to retain allocated memory that contains a data object of a certain type for reuse upon subsequent allocations of objects of the same type.

SLUB allocator promises better performance and scalability by dropping most of the queues and related overhead and simplifying the slab structure in general, while retaining the current slab allocator interface. SLUB offers to make alignment of objects and cleaning up of caches easier, as compared to SLAB.

SLQB - SLAB allocator with Queue. This is a slab allocator that focuses on per-CPU scaling. This memory allocator is designed for small number of CPUs system. This allocator is designed to be simple.

Note that SLUB is significant on a system with large number of CPUs. SLAB has the advantage of being simple.

Q. "Can i change the RCU synchronization mechanism & memory allocators?"
A. NO. They are set at compile time at kernel level, and are not configurable from user space.



MISC Q&A

Q. "What is top-off current?"
A. Charge cycle for the device's battery actually consist of two stage.
First stage consist of supplying a constant current until battery reaches it's constant/peak voltage, something between 4.1 and 4.2 v.
Upon reaching this peak voltage, a constant voltage is applied until the charge current goes below top-off current. This is the second stage. Stock top-off current is 200ma. From Siyah 2.6.9, it is set to 100ma just so that a little more juice goes into battery since a lower top-off current means longer the constant voltage is applied in the second phase of charging.
If you love your battery, do not charge to 'real' 100% too often. Perform the 'trickle' charge only once every 20 days or so.

Q. "My battery drains fast sometimes immediately after a kernel flash. It's like this: i reboot the device with 40 percent battery left and when it returns, i have only 20 percent left. Anything i can do?"
A. Your battery is not actually draining fast. But the fuel gauge is showing funny values which is not the real percentage left. On high-loads, like immediately after you reboot cause the fuel gauge to report low percentages. What you can do is to reset the fuel gauge.
[Courtesy Entropy512. The code is for i9100. Location of reset-file may be different in other variants of GS2]
Give it a few hours after you reset the gauge. It may still show you funny values for those period, then the battery percentage should be fine.
Code:
echo "1" > /sys/devices/platform/i2c-gpio.9/i2c-9/9-0036/power_supply/fuelgauge/fg_reset_soc
Q. "So CPU/GPU or GPS chip, which is the biggest power drainer in GS2?"
A. It is the bright amoled display! Display uses roughly 370mW average and 960mW with 100% brightness full white screen. Avoid bright wallpapers, reduce brightness.

Q. "What're the approximate power consumptions by the device peripherals & activities?"
A.
  • AMOLED Display: Average - 370mW. Full white background, 1% brightness - 450mW. Full white background, 100% brightness - 960mW. So roughly every percentage of brightness increased accounts to additional 5.2mW. (Now we know why using dark wallpapers and reducing brightness is so important than undervolting).
  • Illuminated button - 40mW
  • Led lamp next to camera - 1.3W
  • Camera - 700mW
  • Bluetooth and GPS - 110 to 180mW (Really?!)
  • 2G to 3G switching - 800mW for 8 seconds. (This is no h/w component, but we should know)
  • CPU 1.4 Ghz full load, 100% brightness - 4W+
  • CPU 1.4 Ghz average - 3.2W
  • CPU 1.6 Ghz full load - 5.9W (Forget Ocing to 1600mhz)
  • BLN - 200mW during suspend state opposed to deep sleep 8mW without BLN.
  • Wifi download - 1.51W
  • 2G download - 1.598W
  • 2G upload - 853mW
  • 3G download - 1.603W
  • 3G upload - 2.136W (Stay away from uploading your videos to youtube via 3G)

Q. "Sometimes the device says 'low battery' and switches itself off. But when i turn it on, there's 30% left. Why?"
A. Some heavy load conditions such as quickly reaching 1600mhz on full load, etc will cause the battery voltage to time below 3.3V and this is wrongly interpreted by the battery as empty.

Q. "What is 500 mhz core voltage bug?"
A. It's not a bug. It's a safety feature. What is it: When frequency is raised to 500 from a frequency below it, core voltage used for 500mhz is the core voltage of 800mhz. When frequency is dropped to 500 from a frequency above it, core voltage used is it's own voltage. So climb to 500 uses 800's volt and fall to 500 uses it's own volt. If you're UVing do it properly for 500 and 800. Now you know why.





SIYAH SPECIFIC TWEAKS (2.6 gingerbread versions)

Summary of all user configurable parameters in Siyah kernel. Some which were already listed in above posts, and some which i may have missed out. Let's have everything in one place, with examples.
1) CPU Frequency & Voltages
#Set frequency steps according to the number of steps in your kernel.
echo "1600 1400 1200 1000 800 500 200 100" > /sys/devices/system/cpu/cpu0/cpufreq/freq_table
#Set voltages for frequency steps. Changes possible at +/-25mV steps
echo "1425 1325 1275 1175 1075 975 950 950" > /sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table
#Sets global scaling min&max frequencies
echo "200000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
echo "1400000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
2) Scaling Governor & Smooth Scaling Parameters
#Set scaling governor, according to available governors in your kernel
echo ondemandx > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
#Smooth scaling parameters to control any governor jumping to higher frequency directly (other governor specific tweaks in first post).
echo "2" > /sys/devices/system/cpu/cpu0/cpufreq/smooth_target
echo "2" > /sys/devices/system/cpu/cpu0/cpufreq/smooth_offset
echo "2" > /sys/devices/system/cpu/cpu0/cpufreq/smooth_step


note: Smooth scaling is disabled for interactive based governors: Interactive, Interactivex and Lulzactive in Siyah. Idle loop based governors shouldn't like throttling.
When CPU is on a certain frequency (let's call this current_freq) and governor decides to jump CPU up to a higher frequency (let's call this target_level), Then
If target_level less than smooth_target, CPU jumps either to smooth_target+smooth_offset or current_freq-smooth_step, whichever is smaller.
Note that L0=1600 mhz, L1=1400 mhz, L2=1200 mhz, L3=1000 mhz, ..., L7=100 mhz

Example:
CPU current_freq is 500 (L5) and Ondemand governor decides to jump to 1400 (L1).
We have smooth_target = 2 = L2, smooth_offset = 2 and smooth_step = 2
smooth_target + smooth_offset = L2+2 = L4 = 800 mhz
current_freq - smooth_step = L5-2 = L3 = 1000 mhz
Since 800 mhz is smaller CPU jumps to 800 mhz first and then 1400 mhz.
3) GPU Clock, Voltages, Thresholds & Staycounts
#Set GPU clocks ( valid values are 400/(x*0.5) where x is an integer >= 2. So valid values will be 400/1,400/1.5,etc. Examples: 40 80 89 100 114 133 160 200 267 400 )
echo "160 200 267" > /sys/class/misc/gpu_clock_control/gpu_control
#Set GPU voltages (changes possible at +/-50mV ie at 50000 steps)
echo "900000 950000 1000000" > /sys/class/misc/gpu_voltage_control/gpu_control
#Set GPU Up and Down thresholds
echo "85% 55% 85% 50%" > /sys/class/misc/gpu_clock_control/gpu_control
Working of Thresholds:
Up threshold for Step 1 (160 mhz) = 85% [GPU scales up to 200 from 160 when load >= 85%]
Down Threshold for Step 2 (200 mhz) = 55% [GPU scales down to 160 from 200 when load < 55%]
Up Threshold for Step 2 (200 mhz) = 85% [GPU scales up to 267 from 200 when load >= 85%]
Down Threshold for Step 3 (267 mhz) = 50% [GPU scales down to 200 from 267 when load < 50%]
Step 1 will not have a Down Threshold & Step 3 will not have an Up Threshold since they don't have a step to scale-down to or scale-up to.
#Set GPU Staycounts. Staycount act as rate multiplier for GPU sampling intervals. Now you have complete control over GPU!
echo "1 1 1" > /sys/class/misc/gpu_control/gpu_staycount
4) Hot Plug Thresholds, Sampling Interval & Frequency
#Set second core kick-in threshold for screen-on state
echo "25" > /sys/module/pm_hotplug/parameters/loadl
echo "70" > /sys/module/pm_hotplug/parameters/loadh
#Set second core kick-in threshold for screen-off state [Forcing second core NOT to turn on during screen-off make it easier for first core to hit deep idle, hence power savings]
echo "35" > /sys/module/pm_hotplug/parameters/loadl_scroff
echo "100" > /sys/module/pm_hotplug/parameters/loadh_scroff
#Set hot plug sampling intervals for screen-on state
echo "200" > /sys/module/pm_hotplug/parameters/rate
echo "400" > /sys/module/pm_hotplug/parameters/rate_cpuon

rate is the sampling interval to check if second core should be kicked-in, if present load >= loadh.
rate_cpuon is the sampling ineterval to check if second core should be turned off (if already online), if present load < loadl
#Set hot plug sampling intervals for screen-off state
echo "800" > /sys/module/pm_hotplug/parameters/rate_scroff
rate_scroff is the sampling interval used in screen-off state to check if second core should be turned on, if current load >= loadh_scroff
If second core is already online, rate_cpuon is used as the sampling to check if second core should be turned off

For more info on Hotplug sampling and behavior, please see this post. Unit for these sampling intervals are jiffies. Since frequency of GS2 system timer = 200hz, divide jiffy value by 200 to convert into seconds.
#Set frequency below which second core will not be turned on, regardless of thresholds.
echo "500000" > /sys/module/pm_hotplug/parameters/freq_cpu1on
If CPU frequency <= 500 mhz, then second will not be turned on.
5) Deepsleep Levels
#Set deep sleep frequency & bus speed (L4=800 mhz and 0=400mhz bus speed)
echo "4" > /sys/devices/system/cpu/cpu0/cpufreq/deepsleep_cpulevel
echo "0" > /sys/devices/system/cpu/cpu0/cpufreq/deepsleep_buslevel
6) I/O Schedulers
#Set i/o scheduler
echo "sio" > /sys/block/mmcblk0/queue/scheduler
7) Bus Frequencies
#Set bus frequencies for highest-to-lowest CPU frequencies and enable static bus frequency scaling
echo "0 0 0 1 1 2 2 2" > /sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
echo "enabled" > /sys/devices/system/cpu/cpu0/cpufreq/busfreq_static

Bus speeds: 0: 400 mhz | 1: 266 mhz | 2: 133 mhz
8) Schedule Multi Core & Idle Modes
#enable sched_mc
echo "1" > /sys/devices/system/cpu/sched_mc_power_savings
#enable AFTR
echo "3" > /sys/module/cpuidle/parameters/enable_mask
9) Touch Sensitivity Parameters
#touch sensitivity
echo "50" > /sys/devices/virtual/sec/sec_touchscreen/tsp_threshold
Possible values are between 40 to 80. Lower value = higher sensitivity.
Also use Tegrak's Touch Move app from market to further control touch sensitivity
10) Charge Current
#set AC, Misc & USB charge current
echo "750 650 450" > /sys/devices/virtual/misc/charge_current/charge_current
AC refers to wall charger current, MISC refers to car charger current , USB refers to usb charge current from pc. Do not set Ac & Misc more than 1000mA or Usb more than 450.

11) Brightness Curve Settings
#brightness settings
echo "30" > /sys/class/misc/brightness_curve/min_bl
echo "1" > /sys/class/misc/brightness_curve/min_gamma
echo "24" > /sys/class/misc/brightness_curve/max_gamma

We will have lowest brightness or zero gamma for brightness level read from sensor < 30. Above that, it is linearly mapped to [min_gamma:max_gamma] which is [1:24] here.
To increase the minimum brightness, decrease the min_bl.
Possible values for min_bl = 0 to 255 | min_gamma = 0 to 24 | max_gamma = 0 to 24

12) Switch Hotplug/DualCore/SingleCore
#Dynamic hotplug mode
echo "on" > /sys/devices/virtual/misc/second_core/hotplug_on
#Single core mode
echo "off" > /sys/devices/virtual/misc/second_core/hotplug_on
echo "off" > /sys/devices/virtual/misc/second_core/second_core_on
#Dual core mode
echo "off" > /sys/devices/virtual/misc/second_core/hotplug_on
echo "on" > /sys/devices/virtual/misc/second_core/second_core_on
The above script is a replacement for Tegrak's 2nd Core app, for those who don't like apps to set something on boot.
Last edited by droidphile; 21st December 2012 at 05:29 PM. Reason: typo
The Following 229 Users Say Thank You to droidphile For This Useful Post: [ View ]
30th November 2011, 03:49 PM   |  #6  
droidphile's Avatar
OP Recognized Contributor
Flag Bangalore
Thanks Meter: 6,958
 
1,064 posts
Join Date:Joined: Jul 2011
Post Gingerbread Kernel AIO Configuration Apps: How To Mess With Them
6. CONFIGURE KERNEL AIO APP - GINGERBREAD

See the previous post for detailed description of each tunable. This post is to give an idea on impact of value x or value y for a tunable.

PREFACE:
ARM processor in Exynos chip consists of four major power domains: CPU cores (and L2 cache), GPU, memory interface, and audio/video IP blocks. The tunables discussed below will directly or indirectly affect power consumptions of these domains. Please note: 1) Having an upper hand on Screen-ON power consumption is difficult. Reducing brightness, control GPU behavior and bus frequencies are almost the only ways. 2) Beyond a point we can not achieve better performance or better power saving and it's useless to tweak settings thereafter.



SIYAH KERNEL
Thread | App - ExTweaks


TAB 1 - CPU: Take control on CPU hotplugging, throttling, power saving states, etc

1) Hot-Plug Mode: You have a dual-core device. Forcing single core mode is foolishness. You have room for performance. Forcing dual core mode is also foolishness. Unwanted excess power consumption even when CPU is 'idling' is the 'minor-reason' and blocking deep idle states is the 'major-reason'. (Only first core can hit deep idle states in Exynos 4210. Never forget this!) It takes only a few micro seconds to activate/deactivate a core. So use Hotplugging.

2) loadl, loadh: Do not wait for core 1 to be over-loaded to activate second core.
Sample Values: loadl 25, loadh 75 for less aggressiveness or 25 50 for more aggressiveness.

3) loadl_scroff, loadh_scroff: Bluetooth transfers, wifi/3g downloads, music play. Tasks that can be run during screen-off state are very few. It is recommended to set threshold to 100% so that second core doesn't kick-in during screen-off state. This will help first core to hit deep idle state soon after tasks are finished.
Sample Values: loadl_scroff 50, loadh_scroff 100. Value of loadl_scroff is insignificant since Core 2 will not turn on.

4) rate, rate_cpuon, rate_scroff: Compared to governor sampling interval (in the range of micro seconds), these are normally very high values (terms of seconds or hundreds of milli seconds). Unit is jiffy. One jiffy is the time taken by one tick of the system timer. Frequency of sgs2 timer is 200hz. So the value divided by 200 gives the equivalent seconds. In a research it was found that having two cores online consumes almost same power as having a single core online.
Sample Values: rate 100 rate_cpuon 400 rate_scroff 1000. If you want to delay enabling second core, use 200 400 1000.
Why such a high value for rate_scroff? Because loadh_scroff was set to 100%, core 2 won't kick-in when screen is off. So the value of rate_scroff doesn't matter. We're simply delaying the next sampling.

5) freq_cpu1on: CPU runs efficiently if only first core is used until about 800 mhz and both the cores are used for the higher frequencies (if the load demands).
Sample Value: 800000 (so that second core kicks-in only from frequency>=800 mhz). Or 300000 (so that core2 could be online from 500mhz onwards)

6) Idle Mode, Sched_mc: Unlike 8 idle states supported by OMAP4 of Nexus, GS2 Exynos supports only 3 idle state: IDLE, AFTR, LPA. Also, load balancing using sched_mc makes no sense on an already hotplug-enabled device.
Sample Values: Idle Mode 3 (AFTR+LPA), sched_mc 0

7) smooth_target, smooth_offset, smooth_step: If you feel there's a need for 1) throttling CPU 2) Control governor's urge to jump to maximum frequency too often, then use sensible valid non-zero values. Otherwise, leave it all zero. NOTE: Smooth scaling is enabled only for ondemand and conservative governors.
Sample Values: smooth_target 2, smooth_offset 2, smooth_step 2 for the sake of power saving and precaution. If you prefer not to interfere with governor's decision use 0 0 0.

TAB 2 - GPU: Take control on GPU domain. You decide how many FPS you want!

1) GPU Frequency Steps: There are plenty of frequencies supported by the MALI400. Valid frequencies are 400/(x*0.5) where 2 <= x <= 20. 400 267 200 160 133 114 100 89 80 73 67 62 57 53 50 47 44 42 40 are valid frequencies. I would recommend using energetically efficient GPU freqs.
Sample Values: 160 200 267. If you want more frames, use 200 267 400.

2) GPU Voltages: GPU Undervolting (if not taken care of) has some worse side effects compared to CPU UV. Your game will crash, your navigation app will crash. I'd recommend to use stock voltages. Or just a -50mV UV for each step.

3) GPU UP and DOWN Thresholds: We do not want GPU to immediately scale up after scaling down to a frequency. This implies the thresholds causes overlapping of load-evaluations. Use up-thresholds of the range 80-90. To calculate down-thresholds in such a way that overlapping is prevented, for a set of two freqs, find out what percentage of higher frequency is lower frequency, and reduce 5-10 % from the resultant value.
(If you like the 'good old' two frequency step, set Threshold-2-UP to 100 so that only First two Steps are used and third step will never be active)
Sample Values: 85 70 85 65 (Assuming GPU freqs are 160 200 267). OR 85 65 85 55 (If GPU freqs are 200 267 400).

4) GPU Stay Counts: No of cycles to stay at each GPU step. It is recommended to leave it as default 1 1 1.
Sample Values: 1 1 1

TAB 3 - SCREEN: Take control on touch response and brightness levels.

1) Touch Move Sensitivity: Supported values are between 0 and 20. Lower value: more responsive. Set it too low, swipes will be registered as clicks. Set it too high...yeah do not set it high.
Sample Value: 7

2) min_bl,min_gamma, max_gamma: If you don't want lowest brightness to be very low, use 30 1 24.
Sample Values: 30 1 24 (for stock experience) OR 50 0 20 (for low lowest brightness level and low highest brightness levels)

TAB 4 - MISC: Governor, Scheduler, etc

1) Backup EFS: Backup your precious EFS partition to use in the future to recover a lost IMEI.

2) Android Logger: Enable/Disable Logging. Leave it enabled.

3) Default Ondemand Suspend Frequency: Max frequency to be used by ondemand governor during suspend state (screen-off). Leave it as 500000.

4) Default CPU Governor: Use whichever you like. New ondemand is good enough.

5) Default I/O Scheduler: Use whichever you like. I use sio/bfq.

6) Charge Current: Since it was proved that i9100 Li-ion battery charge current can only be either of 450mA and 650mA, leave it at AC: 650, MISC: 450, USB:450 or AC:650 MISC: 650 USB:450

7) Reset Fuel Gauge Chip: After a low-battery reboot if the battery shows very low and incorrect percentages since true battery capacity failed to accurately synchronize with the fuel gauge, press the button and wait for sometime. An alternative is to charge full->discharge full->charge full.

Last Words: If you use scripts to set bus frequencies, i recommend leaving static bus frequency disabled. Tasks which involves a lot of GPU rendering really does a lot of Write and Read To and From memory. Let the system decide what bus frequency should be used.



FECALITY KERNEL
Thread | App - ExTweaks


TAB 1 - CPU: See above for config hints/sample values for each parameters under this tab.

1) loadh, loadl:

2) loadl_scroff, loadh_scroff:

3) rate, rate_cpuon, rate_scroff:

4) freq_cpu1on:

5) CPU Idle Mode:

TAB 2 - GPU: See above for config hints/sample values for each parameters under this tab.

1) GPU Frequency Steps:

2) GPU Voltages:

3) GPU UP and DOWN Thresholds:

TAB 3 - MISC: See above for config hints/sample values for each parameters under this tab.

1) Backup EFS:

2) Default CPU Governor:

3) Default I/O Scheduler:

4) File Fsync Disable: If FSYNC is used, and a file is open for writing, all cached data will be written to disk. This feature helps to minimize data loss under rough conditions, where power failures can occur. Only advantage to disable per file fsync is increased performance in DB writes, etc. This can also be achieved using a different i/o scheduler. Disabling Pfsync is dangerous as it can lead to data corruption. Do not disable Pfsync.

5) Reset Fuel Gauge Chip:





TAB 1 - NEAK Options:

1) Governors: By default, NEAK comes with Ondemand, Lulzactive and Performance only. To have more governors available, enable from the list and reboot. Conservative governor can also have lionheart tweaks enabled. (Lionheart = aggressive conservative). Selected governors will be loaded on reboots, as module(s).

2) SCHED_MC: Yes you have read multiple times that enabling load-balancing via Linaro's Shedule Multi-Core is redundant and is of no particular use in an hotplug enabled device. Leave it unchecked.

3) AFTR Idle Mode: Enable AFTR+LPA. Use this to have better battery life. The battery life is 'bettered' by hitting deep idle states before the actual deep sleep. If and only if there are issues, leave it unchecked. Possible issues are stuttering videos/lagging gui, etc. This kinda issues arises when AFTR is hit too soon.

4) Ext4 Boost Optimizations: Enable to have remount scripts run during every boot-up. May increase disk performance.

TAB2 - OTA Downloader

Download OTA APP: Click to download Kernel OTA app. OTA app can be used to check and download new releases without visiting xda.



Q. "Even though i could understand everything you stated here about, what exactly does those sample values/recommended settings do? Will i get 8 hours screen-on and 8000 Antuntu?"
A. We have a Galaxy S2, not Nokia 1100. We should utilize and enjoy the performance of the phone. The values recommended were intended to give snappiness without compromising too-much battery life. Our definitions of 'too-much' may be different. But i assure you the difference isn't too much!
Last edited by droidphile; 21st December 2012 at 05:29 PM. Reason: bug fix!
The Following 239 Users Say Thank You to droidphile For This Useful Post: [ View ]
30th November 2011, 03:49 PM   |  #7  
droidphile's Avatar
OP Recognized Contributor
Flag Bangalore
Thanks Meter: 6,958
 
1,064 posts
Join Date:Joined: Jul 2011
Post ICS Kernel AIO Configuration Apps: How To Mess With Them
7. CONFIGURE KERNEL AIO APP - ICS

We heard a lot of "ICS is more mutlithreaded and multi core aware". Can a 3.0 kernel make the best out of dual core Arm Cortex A9? Let's tweak and see.



SIYAH KERNEL
Thread | App - ExTweaks


TAB 1 - CPU: Hotplugging, Smooth Scaling, Idle States

1) Hotplug Mode: Best practice is to use hotplugging instead of single/dual core modes and setup settings in such a way that until about 800 mhz, only first core is active. This is energy efficient because above 800mhz, the voltage increase is steep. So static power consumption increases steeply and it's better to have two cores handling tasks from here on. Having only one core online roughly saves about 55% power compared to two cores online. But it's not worth using single core for all frequencies since the device is capable of more.
Sample Values:CPU Hotplug

2) loadh0, loadl1: Values are so self explanatory. Load-High-0 and Load-Low-1. Thresholds to turn ON and turn OFF second core. When load on first core is greater than or equal to loadh0, second core comes online. When average load on both cores is less than loadl1, second core goes offline. It's better not to overload first core before turning second core on.
Sample Values: loadl 20, loadh 50 for less aggressiveness or 20 30 for more aggressiveness. ICS hotplugging logic has some difference from GB hotplugging. To get the same responsiveness as in gingerbread, i had to use more aggressive(reduced) thresholds.

3) min_rq, load_rq: As of now, what these params does is unknown. I think it's something to do with CPU run queue and enhance load balancing on cores. I'm not sure.

4) rate: Rate is the sampling interval for hutplugging for screen-ON state. Every rate jiffies, load is sampled and if found to be more than loadh0, second core is turned ON. One jiffy is the time taken to complete one tick of the system timer. Frequency of sgs2 timer is 200hz. So the value divided by 200 gives the equivalent seconds or in other words, one jiffy = 5 milliseconds in GS2 terms.
Sample Values: rate 100.

5) freq_min: 'Threshold' frequency for second core to turn on during hotplugging. If current frequency <= freq_min, second core will not turn on even if the load has crossed loadh0. CPU runs efficiently if only single core is used until about 800 mhz and both the cores are used only for the higher frequencies. Because voltage increase is intense past 800 mhz.
Sample Value: 800000 (so that second core kicks-in only from frequency>800 mhz).

6) CPU Idle States: Unlike 8 idle states supported by OMAP4 of Nexus, GS2 Exynos supports only 3 idle state: IDLE, AFTR, LPA.
IDLE - Clock is gated but power on CPU core remains (static power consumption still active)
AFTR - Clock is gated, power on CPU core is removed and L2 cache power remains. Static power consumption mostly eliminated.
LPA - Cache power removed.
AFTR or LPA cannot be entered if second core is active.
Sample Values: Idle Mode 3 (AFTR+LPA), to save battery.

7) Sched_mc: Disable sched_mc. There could be only one situation where load balancing or weird-overloading of first core can be useful - when we use dual core mode. Sched_mc is valid only when both cores are online. Since it doesn't go well with hotplugging logic, if someone uses dual-core mode sched_mc is worth a try to handle task loads on cores.
Sample Values: sched_mc 0

8) smooth_target, smooth_offset, smooth_step: These params helps in 1) Throttling CPU at higher temperatures 2) Control Ondemand based governors' urge to jump to maximum frequency too often by jumping the CPU to an intermediate frequency first. If we're not interested in either of them, leave it as 0 0 0. NOTE: Smooth scaling is enabled only for Ondemand and Conservative governors.
Sample Values: smooth_target 2, smooth_offset 2, smooth_step 2

TAB 2 - GPU: GPU behavior. This matters more than CPU UV w.r.t Screen-On power savings!

1) GPU Frequency Steps: There are plenty of frequencies supported by the MALI400. Valid frequencies are 400/(x*0.5) where 2 <= x <= 20. 400 267 200 160 133 114 100 89 80 73 67 62 57 53 50 47 44 42 40 are valid frequencies. I would recommend using energetically efficient GPU freqs.
Sample Values: 160 200 267. If you want more frames, use 200 267 400.

2) GPU Voltages: GPU Undervolting (if not taken care of) has some worse side effects compared to CPU UV. Your game will crash, your navigation app will crash. I'd recommend to use stock voltages. Or just a -50mV UV for each step.

3) GPU UP and DOWN Thresholds: The four thresholds are threshold to switch to second step, switch back to first step, switch to third step, switch back to second step. We do not want GPU to immediately scale up after scaling down to a frequency. This implies the thresholds are overlapping load-evaluations. Use up-thresholds of the range 80-90. To calculate down-thresholds in such a way that overlapping is prevented, for a set of two freqs, find out what percentage of higher frequency is lower frequency, and reduce 5-10 % from the resultant value.
(If you like the 'good old' two frequency step, set Threshold-2-UP to 100 so that only First two steps are used and third step will never be active)
Sample Values: 85 70 85 65 (Assuming GPU freqs are 160 200 267). OR 85 65 85 55 (If GPU freqs are 200 267 400).

4) GPU Stay Counts: No of cycles to stay at each GPU step. It is recommended to leave it as default 1 1 1.
Sample Values: 1 1 1

TAB 3 - SCREEN: Touch sensitivity, Brightness curve

1) Touch Move Sensitivity: Supported values are between 0 and 20. Lower value is more responsive. But setting it too low will cause swipes to be registered as clicks.
Sample Value: 7 pixel

2) min_bl,min_gamma, max_gamma: If you don't want lowest brightness to be very low, use 30 1 24.
Sample Values: 30 1 20 (for stock experience)
OR 50 0 20 (for low lowest brightness level and low highest brightness levels)

TAB 4 - MISC: Governor, Scheduler, Miscellaneous tweaks

1) Backup EFS: Backup your precious EFS partition to use in the future to recover a lost IMEI.

2) Android Logger: Enable/Disable Logging. Leave it enabled.

3) Default Ondemand Suspend Freq: Max frequency that will be used during screen-off state if Ondemand is the active governor. 500000 (500 mhz) is the most sensible value.

4) Default CPU Governor: Use whichever you like. Ondemand is good enough.

5) Default I/O Scheduler: Use whichever you like. I use sio/bfq.

6) Charge Current: Since it was proved that i9100 Li-ion battery charge current can only be either of 450mA and 650mA, leave it at AC:650, MISC:450,USB:450 OR AC:650 MISC:650 USB:450

7) Reset Fuel Gauge Chip: After a low-battery reboot if the battery shows very low and incorrect percentages since true battery capacity failed to accurately synchronize with the fuel gauge, press the button and wait for sometime. An alternative is to charge full->discharge full->charge full.

8) Remove Root: Some apps detects root and refuse to work if found. In such cases, or if some apps are freezing in a while, remove root and re-install root. Pressing the button will remove Superuser.apk and SU binary.

9) Install Root: Tries to install root after a removal. Copies Superuser.apk and SU binary. If this fails, check 'Auto-Install Root' and reboot.

This post will be updated with more releases of the kernel.
Last edited by droidphile; 21st December 2012 at 05:30 PM.
The Following 442 Users Say Thank You to droidphile For This Useful Post: [ View ]
30th November 2011, 04:20 PM   |  #8  
bala_gamer's Avatar
Recognized Contributor
Flag Madurai-Chennai
Thanks Meter: 6,564
 
11,361 posts
Join Date:Joined: Mar 2011
Donate to Me
More
Nice work droidphile, this will help many people around here.

One more thing, can you add the details about bus frequency selection? It will be helpful for starters
Sent from my GT-I9100 using xda premium
Last edited by bala_gamer; 30th November 2011 at 04:22 PM.
The Following 7 Users Say Thank You to bala_gamer For This Useful Post: [ View ]
30th November 2011, 04:28 PM   |  #9  
droidphile's Avatar
OP Recognized Contributor
Flag Bangalore
Thanks Meter: 6,958
 
1,064 posts
Join Date:Joined: Jul 2011
Quote:
Originally Posted by bala_gamer

Nice work droidphile, this will help many people around here.

One more thing, can you add the details about bus frequency selection? It will be helpful for starters

I will add bus frequencies and other parameters soon.
The Following 21 Users Say Thank You to droidphile For This Useful Post: [ View ]
30th November 2011, 07:46 PM   |  #10  
Senior Member
Auckland
Thanks Meter: 30
 
186 posts
Join Date:Joined: Jul 2011
More
respect!!!!
Nice work droidphile

The Following User Says Thank You to chetasus For This Useful Post: [ View ]
Post Reply Subscribe to Thread

Tags
extweaks, i/o schedulers, init.d scripts, siyah, tweak governors
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Galaxy S II General by ThreadRank