"Unfortunately, Camera has stopped" is it only me or is there a bug?
Can I get a logcat please? It will help determine what is wrong. I haven't had the camera fc on me yet so the log will help
Sent from my SGH-I757M using XDA Premium 4 mobile app
I haven't noticed any bugs lately expect for an issue with the video recorder. The whole thing is completely blurry. Any fixes to try? Also I could try attaching a logcat later, juts need to find some time.
Can I get a logcat please? It will help determine what is wrong. I haven't had the camera fc on me yet so the log will help
Sent from my SGH-I757M using XDA Premium 4 mobile app
Anyone having problems with games? Like the hobbit, it crashes just before it starts. had same problem with a couple of other games.
Thanks
Titanic_fanatic has agreed to build one ROM with the diablo kernel cooked in. I was thinking keep it simple and make it cm11. What does everyone think? Or is there a favorite ROM we like?
Can someone post a copy of the current build.prop? Paste bin please.
Sent from my SGH-I757M using xda app-developers app
Replace this line in the build.prop
ro.kernel.android.checkjni=0
with
dalvik.vm.lockprof.threshold=500
Link for carbon with diablo?
Sent from my SGH-I757M using XDA Premium 4 mobile app
Well. It hasn't been built yet.
Sent from my SGH-I757M using xda app-developers app
---------- Post added at 11:30 AM ---------- Previous post was at 11:29 AM ----------
Not sure. But fixes the issue for me.
Sent from my SGH-I757M using xda app-developers app
[COLOR="red"][B][SIZE="4"]*** Disclamer ***[/SIZE][/B]
THIS ROM IS FOR THE CANADIAN SGH-I757M ONLY... DO NOT FLASH IT ON ANOTHER DEVICE!
By flashing this ROM, you are voiding your phones warranty (Unless you return it
to complete stock which is possible, but beyond the scope of this thread). You
also agree that I will in no way be held responsible in the event that your
device becomes bricked (Not likely to happen). In addition, you are responsible
to take the necessary backups of your apps, data, sms, contacts, calendar events, etc.
If you agree, then please continue on ;)[/COLOR]
[COLOR="red"][B][SIZE="4"]*** NEW RECOVERY REQUIRED ***[/SIZE][/B]
Due to the addition of user control in CM10.1/CM10.2/CM11.0, you are required to update
your recovery to a supported recovery with a version greater than 6.0.39. As of this writing, the latest available
version is Philz Touch Recovery 6.57.9 (based on CWM 6.0.51) for the SGH-I757M. There is currently not a
version of regular CWM for this device that will flash Kit Kat ROMs.
If you flash the new ROM with the old incompatible recovery, you risk loosing
your sdcard under a bunch of subfolders.[/COLOR]
[COLOR="red"][B][SIZE="4"]*** NEW RADIO FIRMWARE REQUIRED ***[/SIZE][/B]
As of CM10.1, ICS radios (I757MUGLH2) are no longer supported. You must download the new JB radios (I757MUGMC5).[/COLOR]
It's finally here :-D CM11.0 (Android4.4.x) for the Bell Canada Samsung Galaxy S2 HD LTE (SGH-I757M). There is a lot to be said about Kit Kat with it's clean white icons and new launcher. The focus with Kit Kat was to make the device use less RAM and imrove performance, and so far it's running great.
* Phone
* Wi-Fi
* Mobile
* GPS
* Bluetooth
* SMS/MMS
* Data Usage
* Camera (Camcorder doesn't work on 1080, swith it to 720 for recording)
* BLN Notification (Enabled in Advanced Device Settings)
* VM Notification
* Youtube Overlays
* init.d is fully supported
* USB Mass Storage (UMS)/MTP
* I experienced an incompatibility with some of my existing mp4 media files and when gallery tries to load them they cause a soft reboot. Loading these videos into the gallery media player using a 3rd party file manager seems to work without issue, it is the loading of the preview in gallery that causes the phone to crash.
Solution: The solution is to use a file manager to move the mp4 files to a new directory and add a ".nomedia" file to that directory so that when browsing photos in the gallery, it does not try to load the offending mp4 files.
1) Download to your sdcard, the new Philz Touch Recovery 6.57.9 flashable zip which is compatible with CM10.1/CM10.2/CM11.0
2) Enter your existing CWM Recovery
3) Install Zip From sdcard
4) Select the philz_touch_6.12.8-celoxhd.zip that you downloaded to your sdcard
5) Flash the new Recovery
6) Go back to the main recovery menu and go Advanced -> Reboot Recovery (This might not actually reboot you into recovery, you may have to do that manually by turning off phone and using 3-button combo)
1) Download the Rom and Gapps (Use only the Gapps downloded from this thread. It is customized due to our small cache partition)
2) Enter CWM
3) TAKE A NANDROID BACKUP
4) Wipe Data/Factory Reset
5) Format Cache
6) Advanced -> Format Dalvik Cache
7) Mounts and Storage -> Format /data,/cache and /system (Required for a clean flash)
8) Flash the Radios (Required before you flash the ROM, unless you already have the new JB radios flashed)
9) Flash the ROM
10) Flash the Gapps
11) Reboot Phone
ROM Downloads
Build: 20141122 (Latest)
ROM: cm-11-20141122-UNOFFICIAL-celoxhd.zip (213.2MB)
PA Mini GAPPS: PA Mini Modular GAPPS
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
NOTE: A clean flash is REQUIRED if upgrading from a previous version of android such as CM10.2
Build: 20140910
ROM: cm-11-20140910-UNOFFICIAL-celoxhd.zip (211.3MB)
PA Mini GAPPS: PA Mini Modular GAPPS
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
DADOES ROM:
Build: 20140424
ROM: cm-11-20140424-DADOES-UNOFFICIAL-celoxhd.zip (469.18MB)
GAPPS: INCLUDED
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
Recovery Downloads
*** REQUIRED *** Philz Touch Recovery 6.12.8 (CWM 6.0.4.7) compatible with CM10.1/CM10.2/CM11.0
[celoxhd][SGH-I757M][CWM Advanced Edition] PhilZ Touch
* I no longer upload files to XDA because it takes way to long to manage, so I only use androidfilehost.com. All files can be found under my profile: https://www.androidfilehost.com/?w=files&flid=7547
Checkout the second post for some tips and tricks on setting up the ROM.
Code:[B]November 22, 2014 - Build 20141122[/B] * Increased kernel version to Titanium 1.1.1 * Added cpu input boost framework - credit: sultanxda * Added cpu OC (The scale goes up to 1890MHz, but you should only put it as high as 1836MHz since I was getting random reboots with 1890MHz. 1674MHz is the default OC and 1512MHz is the default CM OC) - credit: TeamFahQ/sultanxda/titanic-fanatic * Added low power flash mode which will use a low powered flash when the battery is equal to or below 35%. This should help with the camera causing the phone to shut down when trying to take pictures using the flash. This threshold may need to be tweaked, so please let me know if you still experience shut downs related to using the camera. - credit: sultanxda * Added sgs2hdbell as a device name to the updater-script to allow all bell i757m devices to flash the ROM without the need to edit the updater-script. * Added panel undervolt interface. - credit: sultanxda * More memory optimizations. Some of the extra RAM that the previous optimization gave us has been allocated to other things such as the surface flinger. Available RAM is now around ~760MB. * Removed vbus_present wakelock for good (it worked it's way back in somehow) * Added fast charge. Phone will now charge at 1200mA until 95% regardless of your charging source (AC/USB) * Added exFAT driver to kernel. It's a filesystem like ext4 but is based on Windows FAT filesystem. You can format your sdcard as exFAT as it's supposed to be faster than vFAT which is what our sdcards are formatted as. Make sure you backup your sdcard contents before formatting it as exFAT and keep the backup until your sure you want to stick with exFAT. * Removed NFC since I don't think anyone uses it and can't figure out how to have it disabled by default so it is removed completely. If someone is using NFC, let me know and I'll add it back but for now, I just see it as a battery drain. [B]September 10, 2014 - Build 20140910[/B] * Kernel now has a custom version number in addition to my kernel name of Titanium * Optimized kernel memory mapping to increase our physical RAM from ~730MB to ~800MB (a whole 70 extra MB... whoa!)- credit: sultanxda * Removed mDNIe (it's not supported/working) * Removed 91fixoverlays script (no longer needed) * Removed persist.hwc.mdpcomp.enabled from build.prop (hack to fix the hwoverlays because fb drivers are broken somehow) - credit: sultanxda * Added GPU overclock from 266MHz to 320MHz (helps a lot with the UI lag) - credit: sultanxda * Added code for 2 phase OnDemand governor - credit: sultanxda * Added opensource frandom module to help speed up the UI (also helps with the lag) - credit: bryan2894 * Added mdp Color Enhancements (better display color) - credit: sultanxda * Added color/gamma controls in place of mDNIe (see the tips and tricks section for my already tweaked favorite settings) - credit: bryan2894/titanic_fanatic (I had to integrate it into our display drivers) * Added Swipe 2 Wake (S2W) support in the kernel (it's actually tap once on each key from left to right). - credit: bryan2894 * Added audio.r_submix.default.so to the build to enable screencasting - credit: [URL="http://xdaforums.com/hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193"]THIS POST[/URL] * Added the necessary audio channels in the audio_policy.conf for screencasting - credit: [URL="http://xdaforums.com/hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193"]THIS POST[/URL] * Added the necessary settings in Advanced Device Settings for screencasting and color/gamma control - credit: bryan2894/titanic_fanatic (I added the screencasting settings) * Fixed the annoying BLN sticking (I think... Please confirm this for me) - credit: bryan2894 * Fixed the sampling rates for A2DP, input and r_submix channels - credit: bryan2894 * Changed both scaling governors to OnDemand - credit: bryan2894 [B]August 15, 2014 - Build 20140815[/B] * Sync with sources * Added sysfs interfaces for vibrator intensity * Added Settings in Advanced Device Settings for vibrator intensity [B]July 11, 2014 - Build 20140708[/B] * Sync with sources (Update to Android 4.4.4) * Vibrator module now built into kernel * Added sysfs for vibrator intensity to allow user control of the vibrator intensity [B]May 21, 2014 - Build 20140321[/B] * Sync with sources * Switched to using media-caf * Updated kernel with sources for media-caf * Fixed issue with Google Camera resolution preferences FC * Added back 91fixoverlays script due to graphics glitches with the new kernel [B]April 10, 2014 - Build 20140410[/B] * Synced with sources * Added USB Mass Storage Mode (UMS) * Fixed network type selection menu. It now includes LTE as an option. [B]March 29, 2014 - Build 20140329[/B] * Synced with sources * Added overlay items to enable homescreen/lockscreen rotation * Set Camera as default Scene Mode to partially fix camcorder recording * cherry-pick display-caf commits to fix some of the graphical glitches [B]March 21, 2014 - Build 20140321[/B] * Sync with sources * Remove 91fixoverlays script [B]February 6, 2014 - Build 20140206[/B] * Initial release
Q. How do I install SuperSu?
A. Install the latest version from the market. Then open SuperSU and when it asks you to update the superuser binary, answer yes and make sure you select the "TWRP/CWM" method. This will reboot your phone into receovery where the superuser binary will be updated and the su daemon script added. Reboot your phone and you should be rooted.
If your having difficulties getting SuperSu installed, try downloading the flashable zip and manually flashing it to your phone.
UPDATE-SuperSU-v1.65.zip
* Thanks to @formercontra for this tip *
* Make sure this is the way in which you want to manage superuser permissions as I have not yet found a way to revert to the integrated superuser without having to re-flash the rom
Q. How do I access Developer Options?
A. Go to Settings -> About Phone and scroll to the bottom. Press the Build number 7 times to activate the Developer Options.
Q. I was browsing my pictures/videos in the gallery and my phone rebooted?
A. This seems to be caused by the gallery trying to generate a preview from the first frame of an mp4 created on older versions. Simply move the mp4's to a different directory with a file manager and add a ".nomedia" file to the folder to stop the gallery from trying to scan them. To open them, open with a filemanager and then select the gallery media player and it will play without issue.
* CyanogenMod Team - ROM Base
Without all of the hard work and efforts of the CyanogenMod team, this ROM would not be possible, so we owe them our thanks for providing us with such excellent ROMs.
In addition, I have received a lot of help on my journey to understand and be able to develop for the android platform, so I owe the following people my thanks for helping me to make this ROM possible.
* [user=673068]@dsixda[/user] - Initial port of CM9/CM10 for SGH-I757M
* [user=4974935]@Strange Peer[/user] - Continued development of CM10
* [user=3478918]@rukusx7[/user] - Contributor
* [user=4435341]@bijon440[/user] - Contributor
* [user=4036181]@kj2112[/user] - Contributor
* [user=5077807]@Tronith[/user] - Contributor
* [user=3651088]@Zippy Dufus[/user] - Contributor
* @Socim - Thanks to Socim for pointing me in the right direction a few times ;-)
* @formercontra - Contributor
* @Sultanxda - Many bug fixes and improvements for the msm8660 kernel
Thanks guys you've all been so awesome to work with ;)
One last group of people to thank. It's YOU! Without all of you guys and girls who come to download our creations, there would be no reward for doing this. Thank you for downloading, providing feedback and being part of this small family. You are all appreciated ;)
ROM Downloads
Build: 20140528 (Latest)
ROM: cm-11-20140528-UNOFFICIAL-celoxhd.zip (207.2MB)
GAPPS: gapps-kk-20140321.zip (141.4MB)
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
NOTE: A clean flash is REQUIRED if upgrading from a previous version of android such as CM10.2
ROM Downloads
Build: 20140708 (Latest)
ROM: cm-11-20140708-UNOFFICIAL-celoxhd.zip (210.2MB)
GAPPS: gapps-kk-20140321.zip (141.4MB)
PA Mini GAPPS: pa_gapps-modular-mini-4.4.4-20140629-signed.zip (142.2MB)
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
NOTE: A clean flash is REQUIRED if upgrading from a previous version of android such as CM10.2
ROM Downloads
Build: 20140910 (Latest)
ROM: cm-11-20140910-UNOFFICIAL-celoxhd.zip (211.3MB)
PA Mini GAPPS: PA Mini Modular GAPPS
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
NOTE: A clean flash is REQUIRED if upgrading from a previous version of android such as CM10.2
Code:[B]September 10, 2014 - Build 20140910[/B] * Kernel now has a custom version number in addition to my kernel name of Titanium * Optimized kernel memory mapping to increase our physical RAM from ~730MB to ~800MB (a whole 70 extra MB... whoa!)- credit: sultanxda * Removed mDNIe (it's not supported/working) * Removed 91fixoverlays script (no longer needed) * Removed persist.hwc.mdpcomp.enabled from build.prop (hack to fix the hwoverlays because fb drivers are broken somehow) - credit: sultanxda * Added GPU overclock from 266MHz to 320MHz (helps a lot with the UI lag) - credit: sultanxda * Added code for 2 phase OnDemand governor - credit: sultanxda * Added opensource frandom module to help speed up the UI (also helps with the lag) - credit: bryan2894 * Added mdp Color Enhancements (better display color) - credit: sultanxda * Added color/gamma controls in place of mDNIe (see the tips and tricks section for my already tweaked favorite settings) - credit: bryan2894/titanic_fanatic (I had to integrate it into our display drivers) * Added Swipe 2 Wake (S2W) support in the kernel (it's actually tap once on each key from left to right). - credit: bryan2894 * Added audio.r_submix.default.so to the build to enable screencasting - credit: [URL="http://xdaforums.com/hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193"]THIS POST[/URL] * Added the necessary audio channels in the audio_policy.conf for screencasting - credit: [URL="http://xdaforums.com/hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193"]THIS POST[/URL] * Added the necessary settings in Advanced Device Settings for screencasting and color/gamma control - credit: bryan2894/titanic_fanatic (I added the screencasting settings) * Fixed the annoying BLN sticking (I think... Please confirm this for me) - credit: bryan2894 * Fixed the sampling rates for A2DP, input and r_submix channels - credit: bryan2894 * Changed both scaling governors to OnDemand - credit: bryan2894