FORUMS

[Q] galaxy s2 cant upgrade using odin

5 posts
Thanks Meter: 0
 
By aquah2o, Junior Member on 10th March 2014, 12:12 PM
Post Reply Subscribe to Thread Email Thread
hi all.

first off i would like to say that i have searched forums here and there for w few days and i have tried so many things but all with the same result

i have a samsung galaxy s2 that runs 2.3.6 and i wanted to upgrade to a higer os.

but i keep getting the following error

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWMS3_I9100XXMS4_I9100FOPLS6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

i have tried all from removing battery for 20 minutes , different tar files different versions of odin , shorter usb cables different pc's different usb ports

all give me the same problem.

i hope you can show me in the right direction .

thx
Attached Thumbnails
Click image for larger version

Name:	Untitled.jpg
Views:	1489
Size:	212.7 KB
ID:	2623116  
 
 
10th March 2014, 12:34 PM |#2  
Senior Member
Thanks Meter: 3,221
 
More
Hopper8's 'Odin troubleshooting' thread stickied in the General section has all the info you need to get a successful flash; try as much of the stuff in the thread as many times as you need to & you should be fine.
10th March 2014, 02:04 PM |#3  
OP Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by MistahBungle

Hopper8's 'Odin troubleshooting' thread stickied in the General section has all the info you need to get a successful flash; try as much of the stuff in the thread as many times as you need to & you should be fine.


i have tried it all

on 3 different pc's on even a clean install of windows. i have tried 4 samsung cables which i have used with succes before.

i just tried to load 2.3.6 again ( current version on my sgs2) but same problem
i get complete (write) operation failed right after boot.bin

and when i just turn on the telephone now i get a firmware upgrade encountered an issue error
10th March 2014, 02:10 PM |#4  
Senior Member
Thanks Meter: 3,221
 
More
Service centre then. Your other option is perseverance. There is no easy fix.
10th March 2014, 02:41 PM |#5  
OP Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by MistahBungle

Service centre then. Your other option is perseverance. There is no easy fix.

thx for the swift replies ,

but that means the end for me

i live in Suriname and we do not have a service centre here .

thx anyway
10th March 2014, 03:11 PM |#6  
Senior Member
Thanks Meter: 3,221
 
More
Then I strongly suggest you keep trying the stuff in that thread, that's the only option you have. And the experience on here is phones in this situation which are indeed recoverable & do not have a corrupted NAND are fixed with perseverance.
10th March 2014, 05:02 PM |#7  
doctor_droid's Avatar
Recognized Contributor
Flag Indore
Thanks Meter: 1,921
 
More
Quote:
Originally Posted by aquah2o


thx for the swift replies ,

but that means the end for me

i live in Suriname and we do not have a service centre here .

thx anyway

Change ur usb cable n retry... as I said previously ..I always have a flashing error wid my stock usb cord but works properly wid nokia usb cord
10th March 2014, 05:56 PM |#8  
OP Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by doctor_droid

Change ur usb cable n retry... as I said previously ..I always have a flashing error wid my stock usb cord but works properly wid nokia usb cord

I will try a nokia cable or blackerry cable later.
For now i used odin 3.09 and it doesnt fail yet it just stops at sbl.bin and stays ther
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools
Display Modes