[KERNEL][TMO][AOSP/TW][4.1/4.2/4.3/4.4][07/11/2014] KT747 - ND8 - KTweaker

Status
Not open for further replies.
Search This thread

emmanuel_baez

Senior Member
Jun 18, 2013
96
11
31
Boston
Just ran the one that's linked in the op. Wifi gets stuck on "turning on" but never actually does. From what I can see bluetooth works fine. Haven't tested data and gps also seems to not be working. Please excuse me if there issues have been repeated. I did read some time ago that there were issues since t999 did not get kitkat.

Sent from my HTC One_M8 using XDA Free mobile app
 

flip3601

Senior Member
Jan 2, 2011
120
25
Just ran the one that's linked in the op. Wifi gets stuck on "turning on" but never actually does. From what I can see bluetooth works fine. Haven't tested data and gps also seems to not be working. Please excuse me if there issues have been repeated. I did read some time ago that there were issues since t999 did not get kitkat.

Sent from my HTC One_M8 using XDA Free mobile app

There's a link a page or 2 back that works.
 
  • Like
Reactions: emmanuel_baez

emmanuel_baez

Senior Member
Jun 18, 2013
96
11
31
Boston
Everything is working and running smooth but with stock settings my standby time seems to have been reduced drastically. Is anyone else having this issue?

Sent from my SGH-T999 using XDA Free mobile app
 

flip3601

Senior Member
Jan 2, 2011
120
25
Yes to AOSP only. No AOKP.

All Right AOSP users.

Here's another version.

https://www.androidfilehost.com/?fid=95747613655046299

Please do an AnTuTu test before and after. Tell me the change in score please.

Now I am going to focus on Touchwiz for some time. So you AOSP users have 1 day to tell if there's anything pressing you really must have. (No Faux does not count. See my ATT thread post
#15149 .)

Perseus71 I tried this w/ BrokenROM 2day. Had 2 reboots while browsing the phone. Couldn't connect w/ my BT speaker either. Idk if its cuz of the ROM I'm using. Gonna try it again tho. I'll keep u posted

sent from my BrokenS3 v1.3
 

nirogu325

Senior Member
Oct 15, 2010
3,795
1,973
Last edited:

nirogu325

Senior Member
Oct 15, 2010
3,795
1,973
Can someone test the bellow TouchWiz Kernel ?
https://www.androidfilehost.com/?fid=95784891001603071

This is baseline reproduction of last release by KT. So if that version has an issue, the issue will be here as well. I just want to know there are no New issues in this version.
Issues with Auto-Hotplug. It stops working when changing governors...until you disable and turn it on again. Using Likewise ROM. Kernel tested less than a day so if I discover something else, I will try to capture a logcat or whatever you ask.

Sent from my SGH-T999 using Tapatalk
 

Perseus

Retired Senior Moderator / Recognized Developer
Feb 10, 2011
10,626
8,471
Atlantis
Will there be a tentative changelog to look forward to?
Not really. Whatever Change Log KT had when he last released a touchwiz version, would apply.
Issues with Auto-Hotplug. It stops working when changing governors...until you disable and turn it on again. Using Likewise ROM. Kernel tested less than a day so if I discover something else, I will try to capture a logcat or whatever you ask.
Good to know. Please elaborate what you mean by it stops.
Edit: WiFi not ON Likewise 4.4
Thanks. THAT's the kind of issues I was expecting.
 

nirogu325

Senior Member
Oct 15, 2010
3,795
1,973
Not really. Whatever Change Log KT had when he last released a touchwiz version, would apply.

Good to know. Please elaborate what you mean by it stops.

Thanks. THAT's the kind of issues I was expecting.
If Auto Hotplug stops working it means the second core isn't shutting off. Also, WiFi is working here.

Sent from my SGH-T999 using Tapatalk
 

nirogu325

Senior Member
Oct 15, 2010
3,795
1,973
Ok In that case I will pay more attention to this issue as I update this kernel.

Do you recall if the issue existed in the last TW version Ktoon released?
The May build didn't have issues with the Hotplugging. If I have it turned on and then change governors, I usually leave the phone alone and watch if the second core turns off, but this time it does not until I turn the hotplugging off and on again. Oh one more thing. I've noticed I didn't have Autobrightness issues with the default Likewise kernel (ibuddler's kernel based on stock), yet sometimes Autobrightness does not stick until I turn it off/on again with both the May build and the test build of the Ktoon kernel. Those are the only two things that stick so far.
 

Perseus

Retired Senior Moderator / Recognized Developer
Feb 10, 2011
10,626
8,471
Atlantis
The May build didn't have issues with the Hotplugging. If I have it turned on and then change governors, I usually leave the phone alone and watch if the second core turns off, but this time it does not until I turn the hotplugging off and on again. Oh one more thing. I've noticed I didn't have Autobrightness issues with the default Likewise kernel (ibuddler's kernel based on stock), yet sometimes Autobrightness does not stick until I turn it off/on again with both the May build and the test build of the Ktoon kernel. Those are the only two things that stick so far.
Can't do anything with AutoBrightness as that is part controlled by Rom Part by Kernel. Will look into Auto HotPlug
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 210
    This thread is being consolidated! Please click on this link to go to the unified DevDB thread.
    Previous information is retained below for reference only.




    Ktoonsez presents:
    4ff7d2fbb181f.png


    KT747 Jellybean kernel features
    Must have a AT&T, TMO, Bell, Rogers or Telus Samsung ROM to use the Sammy Kernel
    Must have a AT&T, TMO, Bell, Rogers or Telus AOSP ROM to use the AOSP Kernel
    Must have custom recovery installed: (Here is one suggestion: http://www.epiccm.org/2012/06/team-epics-root-from-recovery.html)
    •Linux kernel 3.0.69 + 3.4.95
    •Samsung open source
    •Optimized kernel configuration
    •Updated USB driver
    •Updated wifi driver
    •custom bootanimation
    •unsecure root adb
    •init.d support
    •Governors (MSM-DCVS, ABYSSPLUG, BADASS, SUPERBAD,LAGFREE, SLEEPY, SCARY, SMARTASSV2, WHEATLEY, LAZY, ADAPTIVE, INTERACTIVE, PEGASUSQ, LULZACTIVE, KTOONSERVATIVE, CONSERVATIVE, ONDEMAND, USERSPACE, PERFORMANCE)
    •Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE)
    •Voltage interface
    •CPU Overclocking
    •CPU Underclocking
    •Boots on stock table (USE KTweaker app to enable OC steps all the way to 2106mhz)
    •Fastcharging for USB/Car Charger (you must be unplugged before turn fast charge on or off, also Fast Charge DISABLES USB connection to your PC)
    KTweaker app for kernel control
    KTweaker Widget

    4fb98c4be2161.png






    ******* END OF LIFE *******
    Touchwiz JELLYBEAN 4.1.2 VERSIONS:
    http://goo.gl/EfFr0g
    Touchwiz JELLYBEAN 4.3 VERSIONS:
    http://goo.gl/IgVrbH

    AOSP JELLYBEAN 4.2 Linux 3.4 VERSIONS:
    http://goo.gl/52odw
    ***** IMPORTANT *****
    If you are using my ktoonservative governor with the Touchwiz JELLYBEAN version, you should rename /system/bin/qosmgr to /system/bin/qosmgr.bak to prevent battery drain



    Always do the following AFTER installing the kernel:
    1. Clear cache
    2. Clear dalvik
    3. Fix Permissions



    Ktoonsez Boot Animation zip file :D, thanks danesusername
    https://www.dropbox.com/sh/flck8sddiu34z7w/bAA7_WvggL/MachineKtoonz

    BUG Reports
    To get better help I need to know what ROM you are on (Name and whether it is Sammy or AOSP and Jellybean or ICS).

    Post #2 will be reserved for change logs

    Post #3 will be reserved for MY SETTINGS, Extras and FAQ's


    Link to a list of previous builds
    http://xdaforums.com/showthread.php?p=41733434


    OLD DOWNLOADS
    ICS VERSIONS:
    AOSP VERSION: Download CWM flashable zip kernel
    http://www.mediafire.com/?93cj9n3d2oc4693

    Touchwiz Version: Download CWM flashable zip kernel
    http://www.mediafire.com/?n54ghsvdze5i61i

    JELLYBEAN 4.1 VERSIONS:
    AOSP JELLYBEAN: Download CWM flashable zip kernel
    http://www.mediafire.com/download.php?1hnavz4mbr660vh


    Sources can be found here:
    https://github.com/ktoonsez
    42
    ktoonservative Governor
    This governor is based on conservative, but added some tunable vars and made it a hotplugging governor unlike conservative. With the settings I included stock it is probably the most responsive gov and is pretty good at saving battery as well. Especially with my screen off option to limit the CPU top Mhz. Hope that answers all ur questions.

    Governors and schedulers explained:
    http://xdaforums.com/showthread.php?t=1687578
    http://xdaforums.com/showthread.php?t=1369817
    http://tinzdroid.blogspot.com/2012/07/android-kernel-governors-modules-io.html
    http://xdaforums.com/showpost.php?p=21638852&postcount=56

    Here is a link for people having issues with 64GB sd card. Follow the link below:
    http://xdaforums.com/showthread.php?t=1755448

    Undervolting

    Stock___________________Undervolt startoff point___________________jerrygooch
    Mhz - mV___________________Mhz - mV___________________________Mhz - mV
    1890 - 1300___________________1890 - 1300____________________________1890 - 1200
    1809 - 1275___________________1809 - 1250____________________________1809 - 1150
    1728 - 1250___________________1728 - 1200____________________________1728 - 1100
    1674 - 1200___________________1674 - 1175 ____________________________1674 - 1075
    1512 - 1200___________________1512 - 1200 ____________________________1512 - 1075
    1458 - 1187___________________1458 - 1187 ____________________________1458 - 1050
    1404 - 1187___________________1404 - 1187 ____________________________1404 - 1050
    1350 - 1175___________________1350 - 1175 ____________________________1350 - 1025
    1296 - 1175___________________1296 - 1175 ____________________________1296 - 1025
    1242 - 1150___________________1242 - 1150 ____________________________1242 - 1000
    1188 - 1150___________________1188 - 1150 ____________________________1188 - 1000
    1134 - 1125___________________1134 - 1125 ____________________________1134 - 975
    1080 - 1125___________________1080 - 1125 ____________________________1080 - 975
    1026 - 1075___________________1026 - 1075 ____________________________1026 - 925
    972 - 1075____________________972 - 1075 _____________________________972 - 925
    918 - 1050____________________918 - 1050 _____________________________918 - 900
    864 - 1050____________________864 - 1050 _____________________________864 - 900
    810 - 1025____________________810 - 1025 _____________________________810 - 875
    756 - 1025____________________756 - 1025 _____________________________756 - 875
    702 - 975_____________________702 - 925 ______________________________702 - 825
    648 - 975_____________________648 - 925 ______________________________648 - 825
    594 - 950_____________________594 - 850 ______________________________594 - 800
    540 - 950_____________________540 - 850 ______________________________540 - 800
    486 - 925_____________________486 - 850 ______________________________486 - 800
    384 - 925_____________________384 - 825 ______________________________384 - 800
    192 - 900_____________________192 - 825 ______________________________192 - 800

    Alternate Boot Splash from uoY_redruM and greentshirt
    http://d-h.st/ykb

    KTweaker New User Guide & Settings (Thanks Perseus71)
    http://xdaforums.com/showthread.php?t=2367975
    37
    Thanks to flak0 for bringing it to my attention that my kernel is compatible with the TMO phone so I started a thread for you guys :D. Also thanks to Wildchld for the TMO ROM and promoting my kernel :D

    ENJOY

    EDIT:
    Jellybean has been confirmed working too thanks to "djintrigue808" and "ikhtiaralam". OP Updated. :good:
    27
    4fb98c4be2161.png


    Change Log 5.9.2013
    1. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.295 from codeaurora.org
    2. ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6
    3. Revert "ASoC: msm: Support independent left-right channel volume cont
    4. Revert "arm: mm: Add VM_ARM_EMPTY_MAPPING flag to mark the PMD gaps
    5. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.292 from codeaurora.org
    6. Couple patches for schedulers main code
    7. Raise MDP bandwidth requirements (this should get rid of the screen flicker that some were getting)
    8. Compiled with latest Linaro
    9. Linux 3.4.44
    10. Completely sync'd with CM