[KERNEL][AGNi][CM] 18-05-2016 AGNi pureCM v5.10.3 I9305 (ULTRA SMOOTH)

[krakowiak84]

I checked now at home at the root Explorer, and no problem I deleted the folder. Of course, access to the root-and I have granted

 

[malwarebyte]

Every manager of files
Root Explorer or other ...

i tried but it kept coming back

Does it come back after delete? If yes, then try go from root/data/media/0 with file manager that has root rights.

this worked. ty

 

[aaz03]

Getting big gpu performance issues with the latest 4.4.3 on RR, lags everywhere. Meanwhile the cpu scores didn't change on any bench, only gpu problem it seems.

 

[Antsu]

Getting big gpu performance issues with the latest 4.4.3 on RR, lags everywhere. Meanwhile the cpu scores didn't change on any bench, only gpu problem it seems.

Which RR and kernel?

 

[psndna88]

Getting big gpu performance issues with the latest 4.4.3 on RR, lags everywhere. Meanwhile the cpu scores didn't change on any bench, only gpu problem it seems.

No changes made in GPU department.

 

[aaz03]

Which RR and kernel?

5.4.4 with sammy blobs, was using agni 4.4.3 then I switched back to 2.9.1 r2 way better atm

 

[Antsu]

5.4.4 with sammy blobs, was using agni 4.4.3 then I switched back to 2.9.1 r2 way better atm

Ok. I'm using sammy RR also. But kernel is 4.4.3 which i've been using since it released. Never had lags since I set it up.
Here's my settings:

Governor: pegasusq
Scheduler: sio for both
Cpu: 300-1500mhz, uv - 25mv (I have changed uv scripts to 12.5, 25 and 50mv. 1600, 1500, 300 and 200 undervolted also, asv6)
Gpu: 160-533, uv - 25mv
Gpu treshold: normal
Lmk: normal
PreloadSwap: off
Touchboost: off
Read ahead: int-256, ext-512
Power saving load balancer: off
Zram: off

Here's antutu results. I can't remember what gpu performance was on stock sammy so I don't know if it's normal or bad. Maybe you remember. And is antutu good for testing gpu...

 

[psndna88]

15-05-2015 Update v4.4.4(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
update wm8994, Remove and cleanup wolfson sound | Squashed commit - Disable various debugging | Implement kexec-hardboot (newer kitkat-kexec-new branch) | adjustable vibration level in AGNi Control | reapply some previously reverted commits

15-05-2015 Update v4.4.4 (Stock-sources based)
Remove and cleanup wolfson sound | Squashed commit - Disable various debugging | Implement kexec-hardboot (newer kitkat-kexec-new branch) | adjustable vibration level in AGNi Control | reapply some previously reverted commits | smdk4412: reboot bootloader boots into download mode | mfc5x-cm: for CM implementation to fix video recording issue

 

[Atexor]

Unfortunately I'm also getting big lags (while clicking "back', 'show recent apps', viewing options etc.) on RR Sammy with agni 4.4.3 (smdk/normal). What can cause it? It may not be fully compatible with that ROM or is it caused by things that you fixed at 4.4.4? What do you think?

Few apps that I checked (Opera, antutu, messenger, poweramp, 2048, Shazam, camera) I didn't noticed any bigger problems. It works smooth and clean.

 

[aaz03]

15-05-2015 Update v4.4.4(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
update wm8994, Remove and cleanup wolfson sound | Squashed commit - Disable various debugging | Implement kexec-hardboot (newer kitkat-kexec-new branch) | adjustable vibration level in AGNi Control | reapply some previously reverted commits

15-05-2015 Update v4.4.4 (Stock-sources based)
Remove and cleanup wolfson sound | Squashed commit - Disable various debugging | Implement kexec-hardboot (newer kitkat-kexec-new branch) | adjustable vibration level in AGNi Control | reapply some previously reverted commits | smdk4412: reboot bootloader boots into download mode | mfc5x-cm: for CM implementation to fix video recording issue

Gone way better with this version, looks even smoothier than 2.9.1

 

[aaz03]

Ok. I'm using sammy RR also. But kernel is 4.4.3 which i've been using since it released. Never had lags since I set it up.
Here's my settings:

Governor: pegasusq
Scheduler: sio for both
Cpu: 300-1500mhz, uv - 25mv (I have changed uv scripts to 12.5, 25 and 50mv. 1600, 1500, 300 and 200 undervolted also, asv6)
Gpu: 160-533, uv - 25mv
Gpu treshold: normal
Lmk: normal
PreloadSwap: off
Touchboost: off
Read ahead: int-256, ext-512
Power saving load balancer: off
Zram: off

Here's antutu results. I can't remember what gpu performance was on stock sammy so I don't know if it's normal or bad. Maybe you remember. And is antutu good for testing gpu...

BTW where are the scripts you change for asv undervoltings? I'd like to enable undervolt for 200-300 values too.

And PsnDna, if you have time could you please build us a F2FS compatible recovery like devil? 2.7.0.0 isn't working anymore...

 

[Antsu]

BTW where are the scripts you change for asv undervoltings? I'd like to enable undervolt for 200-300 values too.

And PsnDna, if you have time could you please build us a F2FS compatible recovery like devil? 2.7.0.0 isn't working anymore...

Ok. I used root explorer.
1) extracted kernel zip
2) tools/packing/res/misc/asv(x)
3) edited scripts
4) zipped back
5) flashed on top of "non edited" agni

---------- Post added at 01:22 AM ---------- Previous post was at 12:59 AM ----------

@psndna88

Hi. Sorry for bothering you with cpu undervolt script again. Isn't this 12.5mv steps voltage table? I'm asking because doesn't 10mv steps give sometimes unproper values that phone corrects to nearest 12.5 step. For example if you lower 950mv to 940mv it really goes to 938mv (or 937,5mv to be precise). It can be checked from sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table after undervolting is done.

 

[mindphaser2k9]

I have noticed that when I enable Governor Pegasusq (default), only one CPU core is active after sleep, other 3 are disabled. The kernel is PSN_pureCM_12+_ANYROM-AROMA-v4.4.4_I9305_OC. How to fix that?

 

[aaz03]

I have noticed that when I enable Governor Pegasusq (default), only one CPU core is active after sleep, other 3 are disabled. The kernel is PSN_pureCM_12+_ANYROM-AROMA-v4.4.4_I9305_OC. How to fix that?

That's perfectly normal: the other cores will enable only while in high load, it's better for battery

 

[mindphaser2k9]

That's perfectly normal: the other cores will enable only while in high load, it's better for battery

But there are lags in firefox etc though I set CPU to 1.5 GHz and Touch Boost to 800 Mhz.
What governor or other settings do you recommend to liquidate lags?

 

[Foxlife]

Try ondemand

Sent from my Nexus 10 using XDA Free mobile app

 

[mindphaser2k9]

Try ondemand

Sent from my Nexus 10 using XDA Free mobile app

But there is no ondemand in the list of governors.

 

[il3gal]

But there is no ondemand in the list of governors.

Download: Kernel Adiutor (link: https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor)
And set cpu to Ondemand (check and apply on boot)...disable TouchBoost
If you want only performance, set Performance governor. 0 lag.

 

[hexisg]

i would like to know if the Agni 4.4.4 sammy sources works on normal AOSP roms with Cm sources.
Thank you.

 

[psndna88]

03-06-2015 Update v4.4.5 (Stock-sources based)
03-06-2015 Update v4.4.5(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)

Use drivers/usb/gadget from CM source for AGNi pureCM builds | Bring net/bluetooth and drivers/usb/core to GT-N7100_KK_Opensource_Update1 state | Revert "earysuspend: speedup late resume (faster wakeup of the device)" | drivers/cpufreq: misc governor changes (arter97) | Revert "cpu boost: backport missing functions from 3.4 (DerTeufel)" | Revert "cpufreq: Add cpu-boost driver" | Revert "cpufreq: Add a sync limit to cpu-boost" | drivers/cpufreq: Add smartass v2 , update interactive (arter97) | Implemented intelli_plug (arter97) | Revert "scheduler: compute time-average nr_running per run-queue" | Add samsung sdcardfs from 5.0 as sdcardfslp (arter97) | netfilter: IDLETIMER: fix invalid deference of timer | ext4: Speed up FITRIM by recording flags in ext4_group_info | ipv4: Missing sk_nulls_node_init() in ping_unhash() | f2fs: ditch SEGMENT_SIZE for f2fs_trim_fs | f2fs: disable userspace FITRIM ioctl for now (anyways we are using auto discard from the kernel) | kernel/futex.c: Squash update | Modify "Dynamically adjust cpufreq_max_limit according to scaling_max setting without breaking power save mode" to be effective only for AGNi pureSTOCK builds | revert wm8994 updates | Agni control app no longer request for root on each boot | touchwake charger mode + 10 sec normal touchwake option.
Intelli-plug is disabled for "lulzactiveq, pegasusq, pegasusqplus, performance, powersave, userspace, yankasusq, zzmoove, pegasusqpluso" as they have their own hotplugging logic implemented.
I had frequent SOD's with smartassV2 governor on pureCM, be informed.