Post Reply

s3 wont boot, odin flash fails

OP akeybreakerz

27th June 2014, 07:00 PM   |  #1  
OP Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: May 2011
Hi guys,

Got a red samsung s3 (gt-i9300).
The phone wont start normally, it will just hang at the phone start screen when you press the power button.
The phone is unrooted and on stock rom. I can get in both download mode & recovery mode.
I tried flashing rom using odin but got this error instead:

Quote:

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Going into recovery mode will display lots of errors like this (pls refer attachment)

Can you guys please advise me on what I can do to revive the phone?
Any help would be appreciated.
Thanks!
Attached Thumbnails
Click image for larger version

Name:	WP_20140627_23_44_38_Pro.jpg
Views:	13
Size:	271.4 KB
ID:	2820855   Click image for larger version

Name:	WP_20140628_01_41_01_Pro.jpg
Views:	10
Size:	275.0 KB
ID:	2820856  
27th June 2014, 07:03 PM   |  #2  
Senior Member
Thanks Meter: 11
 
138 posts
Join Date:Joined: Feb 2013
try to flash emergency firmware ,if not ,then service
27th June 2014, 07:08 PM   |  #3  
OP Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: May 2011
Quote:
Originally Posted by alecore

try to flash emergency firmware ,if not ,then service

how to flash emergency firmware?
27th June 2014, 07:13 PM   |  #4  
Senior Member
Thanks Meter: 11
 
138 posts
Join Date:Joined: Feb 2013
http://forum.xda-developers.com/show...35&postcount=6 here


follow the steps and you will be fine
29th June 2014, 01:56 AM   |  #5  
OP Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: May 2011
Unhappy
Quote:
Originally Posted by alecore

http://forum.xda-developers.com/show...35&postcount=6 here


follow the steps and you will be fine

It didn't work.... Y__Y

Quote:

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_shi p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar. md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.m d5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

29th June 2014, 09:20 AM   |  #6  
boomboomer's Avatar
Senior Member
Thanks Meter: 711
 
3,230 posts
Join Date:Joined: Jun 2010
Your emmc chip is damaged, new motherboard required.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes