Post Reply Subscribe to Thread Email Thread

screen/digitizer issues after front glass replacement

6th July 2014, 02:50 PM |#1  
OP Junior Member
Thanks Meter: 0
1 posts
Join Date:Joined: Jul 2014
Hello all,

A few weeks ago I did a front glass replacement on my girlfriends s3. Since then the phones touch functions turn off and on at random intervals. Some days the phone will work perfectly and some days you have to firmly press the whole screen back down for touch commands to be recognized. I am thinking that when I did the repair I left a small bit of glass that is slowly pushing the glass back off the display and causing it to not work. Or that I may just need to melt the glue again and press the screen down firmer.

Has anyone had this issue after a front glass replacement?

Thanks in advance for any replies
6th July 2014, 10:59 PM |#2  
boomboomer's Avatar
Senior Member
Thanks Meter: 795
3,694 posts
Join Date:Joined: Jun 2010
Usual problem after glass replacement is heat damage to other components.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes