5,597,198 Members 43,486 Now Online
XDA Developers Android and Mobile Development Forum

Thread closed.

Tip us?
 
Yank555
Old
#2671  
Yank555's Avatar
Senior Member - OP
Thanks Meter 9063
Posts: 5,887
Join Date: Sep 2009
Default Re: [Kernel][2013/FEB/10][GT-I9300][Samsung JB U7][3.0.62][Aroma] Yank555.lu kernel v

Quote:
Originally Posted by invinciblecc View Post
Yank asked this question b4 but don't remember getting a clear ans
sorry for off topic
1) does cord also limit charge current or charge speed in any way example same charter but diff cord used HTC and saammy cord with both with Sammy charger should there be any difference in
Yes it can be, as the kernel will reduce charging current if the current drawn is unstable.

The Sammy cable is just as crappy as the charger itself

Honestly, best is to use any other 1A/h rated charger with a quality USB cable (I use those I got with my htc Sensation)...

JP.

Sent from my custom Sotmax V15 / Yank555.lu SGS3 U7 kernel v3.2 Aroma (Linux 3.0.62) powered Galaxy S3 i9300 using Tapatalk 2
Note 3 N9005 32Gb Proudly eFused
64Gb FAT32 / JB bootloader / CM11 (hltexx) / CWM / 1Gb zSwap
Yank555.lu AOSP kernel v0.91-beta7 (3.4.85)

Kernels : AOSP v0.9 (3.4.78) / JB-TW 4.3 v0.8

SGS3 I9300 32Gb
32Gb FAT32 / CWM

Kernels : OMNI/CM11 v1.7 (3.0.101) for i9300 & v1.6g (3.0.101) for i9305 / Samsung U13 v4.2 (3.0.101) for i9300 & U12 v4.0+ (3.0.101) for i9305

HTC Sensation XE
HTC HD2
TF300TG 32Gb



Credits FAdrums !
 
invinciblecc
Old
#2672  
invinciblecc's Avatar
Senior Member
Thanks Meter 169
Posts: 777
Join Date: Aug 2012
Default Re: [Kernel][2013/FEB/10][GT-I9300][Samsung JB U7][3.0.62][Aroma] Yank555.lu kernel v

Quote:
Originally Posted by Yank555 View Post
Yes it can be, as the kernel will reduce charging current if the current drawn is unstable.

The Sammy cable is just as crappy as the charger itself

Honestly, best is to use any other 1A/h rated charger with a quality USB cable (I use those I got with my htc Sensation)...

JP.

Sent from my custom Sotmax V15 / Yank555.lu SGS3 U7 kernel v3.2 Aroma (Linux 3.0.62) powered Galaxy S3 i9300 using Tapatalk 2
One question very important please reply quick
I have a 2ampere charger of my galaxy tab 2 now if I use normal s3 stock cable with that charger that is I put this cable into USB charger of tab 2 and charge my s3 after setting charge rate in ur kernel to 1500 my battery will not fuse right as charger will supply only 1500 right not 2anpere as phone is demanding only 1500ma


Finally enjoying s3
Yanks kernel
Sotmax v13
Zram enabled
Swap enabled
 
Yank555
Old
#2673  
Yank555's Avatar
Senior Member - OP
Thanks Meter 9063
Posts: 5,887
Join Date: Sep 2009
Quote:
Originally Posted by invinciblecc View Post
One question very important please reply quick
I have a 2ampere charger of my galaxy tab 2 now if I use normal s3 stock cable with that charger that is I put this cable into USB charger of tab 2 and charge my s3 after setting charge rate in ur kernel to 1500 my battery will not fuse right as charger will supply only 1500 right not 2anpere as phone is demanding only 1500ma
Right, the phone will take what the charger can give up to what you set in Aroma :

Setting it to 1500mA/h in Aroma, and

- using a 1000mA/h charger, will charge at 1000mA/h.

- using a 1500mA/h charger, will charge at 1500mA/h.

- using a 2000mA/h charger, will charge at 1500mA/h.

JP.

PS: I would not use the stock cable, though, it has issues with 1A/h already because it's of bad quality, so I'd advise you to rather use a different one.
Note 3 N9005 32Gb Proudly eFused
64Gb FAT32 / JB bootloader / CM11 (hltexx) / CWM / 1Gb zSwap
Yank555.lu AOSP kernel v0.91-beta7 (3.4.85)

Kernels : AOSP v0.9 (3.4.78) / JB-TW 4.3 v0.8

SGS3 I9300 32Gb
32Gb FAT32 / CWM

Kernels : OMNI/CM11 v1.7 (3.0.101) for i9300 & v1.6g (3.0.101) for i9305 / Samsung U13 v4.2 (3.0.101) for i9300 & U12 v4.0+ (3.0.101) for i9305

HTC Sensation XE
HTC HD2
TF300TG 32Gb



Credits FAdrums !
 
inteks
Old
#2674  
inteks's Avatar
Senior Member
Thanks Meter 704
Posts: 1,063
Join Date: Oct 2006

 
DONATE TO ME
Default AW: [Kernel][2013/FEB/10][GT-I9300][Samsung JB U7][3.0.62][Aroma] Yank555.lu kernel v

hi.,
I've a problem with cifs.ko
cant load it via shell insmod nor cifsmanager

sent from galaxy
 
Musko
Old
#2675  
Senior Member
Thanks Meter 44
Posts: 343
Join Date: Sep 2008
Location: Bratislava
Quote:
Originally Posted by Yank555 View Post
Try removing 00sotmax from there, and also, try removing /data/local.prop (if it exists).

JP.

PS: I suppose you have 3.1i version installed ?
OK, when I remove this two files, I have no lag anymore

Thank you Yank555
Nexus 5 - Stock
Rooted by CF-Auto-Root
 
invinciblecc
Old
(Last edited by invinciblecc; 13th February 2013 at 04:46 PM.)
#2676  
invinciblecc's Avatar
Senior Member
Thanks Meter 169
Posts: 777
Join Date: Aug 2012
Default Re: [Kernel][2013/FEB/10][GT-I9300][Samsung JB U7][3.0.62][Aroma] Yank555.lu kernel v

Quote:
Originally Posted by Yank555 View Post
Right, the phone will take what the charger can give up to what you set in Aroma :

Setting it to 1500mA/h in Aroma, and

- using a 1000mA/h charger, will charge at 1000mA/h.

- using a 1500mA/h charger, will charge at 1500mA/h.

- using a 2000mA/h charger, will charge at 1500mA/h.

JP.

PS: I would not use the stock cable, though, it has issues with 1A/h already because it's of bad quality, so I'd advise you to rather use a different one.
I will change cable asap
Regarding issue with 1a charger stock
What issues would it harm the device in any way
also would it harm the charging mechanism of battery in any way(it refers to charging at fast rate)
And if u say that it would eventually fry the battery that is harm it in the long run please specify the long run a rough idea 2monts 1 year etc
P.so. it would damage only the battery even if it damages something in the long run
The phone /screen wouldn't be affected in any way


Finally enjoying s3
Yanks kernel
Sotmax v13
Zram enabled
Swap enabled
 
Yank555
Old
#2677  
Yank555's Avatar
Senior Member - OP
Thanks Meter 9063
Posts: 5,887
Join Date: Sep 2009
Quote:
Originally Posted by invinciblecc View Post
I will change cable asap
Regarding issue with 1a charger stock
What issues would it harm the device in any way
also would it harm the charging mechanism of battery in any way(it refers to charging at fast rate)
And if u say that it would eventually fry the battery that is harm it in the long run please specify the long run a rough idea 2monts 1 year etc
P.so. it would damage only the battery even if it damages something in the long run
The phone /screen wouldn't be affected in any way
Don't know if it would damage anything, but it sure is not as should.

The kernel has a mechanism to throttle down charge rate (on AC from 1A/h down in steps of 100mA/h I believe) if the current from the charger is unstable (which is the behaviour on the crappy stock charger).

It will at least give a variable charge time as it might charge fast one day, slow the other.

Samsung must be aware of it I think, there are enough threads about this problem, as they dump quite a log of debug info in the kernel log from the charger code ... but then again, they dump a hell of a lot in the kernel logs anyway

JP.
Note 3 N9005 32Gb Proudly eFused
64Gb FAT32 / JB bootloader / CM11 (hltexx) / CWM / 1Gb zSwap
Yank555.lu AOSP kernel v0.91-beta7 (3.4.85)

Kernels : AOSP v0.9 (3.4.78) / JB-TW 4.3 v0.8

SGS3 I9300 32Gb
32Gb FAT32 / CWM

Kernels : OMNI/CM11 v1.7 (3.0.101) for i9300 & v1.6g (3.0.101) for i9305 / Samsung U13 v4.2 (3.0.101) for i9300 & U12 v4.0+ (3.0.101) for i9305

HTC Sensation XE
HTC HD2
TF300TG 32Gb



Credits FAdrums !
 
invinciblecc
Old
#2678  
invinciblecc's Avatar
Senior Member
Thanks Meter 169
Posts: 777
Join Date: Aug 2012
Default Re: [Kernel][2013/FEB/10][GT-I9300][Samsung JB U7][3.0.62][Aroma] Yank555.lu kernel v

Quote:
Originally Posted by Yank555 View Post
Don't know if it would damage anything, but it sure is not as should.
JP.
But it sure is not as should
Didn't get what up meant by the above line brother please elaborate sorry for my bad english
Finally enjoying s3
Yanks kernel
Sotmax v13
Zram enabled
Swap enabled

---------- Post added at 11:16 PM ---------- Previous post was at 10:59 PM ----------

Quote:
Originally Posted by invinciblecc View Post
But it sure is not as should
Didn't get what up meant by the above line brother please elaborate sorry for my bad english
Finally enjoying s3
Yanks kernel
Sotmax v13
Zram enabled
Swap enabled
Did u mean to say that u r not sure that it would damage some something and it could possibly damage the phone even right

Finally enjoying s3
Yanks kernel
Sotmax v13
Zram enabled
Swap enabled
 
Yank555
Old
#2679  
Yank555's Avatar
Senior Member - OP
Thanks Meter 9063
Posts: 5,887
Join Date: Sep 2009
Quote:
Originally Posted by invinciblecc View Post
But it sure is not as should
Didn't get what up meant by the above line brother please elaborate sorry for my bad english
A charger that is labeled to give 1A/h, well, just should do that, and give proper 1A/h constant current. Samsung's sure does not do that, so it's not as it should be.

Quote:
Originally Posted by invinciblecc View Post
Did u mean to say that u r not sure that it would damage some something and it could possibly damage the phone even right
I don't think it could damage the phone, but it might not be ideal for the battery if it's charged at rates that change during one single charge, but I'm no electical engineer, so my knowledge doesn't go that deep into this, that's electrical hardware stuff, not software development

All I know is :

a) Sammy's charger and cable is crap

b) my htc Sensation charger and cable is of way better quality

a + b => I use the htc charger and cable

And I never had a single issue with charging.

JP.

PS: htc's charger is also 1A/h, so can't tell about fast charge on AC, I only use 1A/h on USB because of my car charger that is detected as normal USB port and phone would charge slow (475mA/h) even if the charger is labeled and gives 1A/h properly.
Note 3 N9005 32Gb Proudly eFused
64Gb FAT32 / JB bootloader / CM11 (hltexx) / CWM / 1Gb zSwap
Yank555.lu AOSP kernel v0.91-beta7 (3.4.85)

Kernels : AOSP v0.9 (3.4.78) / JB-TW 4.3 v0.8

SGS3 I9300 32Gb
32Gb FAT32 / CWM

Kernels : OMNI/CM11 v1.7 (3.0.101) for i9300 & v1.6g (3.0.101) for i9305 / Samsung U13 v4.2 (3.0.101) for i9300 & U12 v4.0+ (3.0.101) for i9305

HTC Sensation XE
HTC HD2
TF300TG 32Gb



Credits FAdrums !
The Following User Says Thank You to Yank555 For This Useful Post: [ Click to Expand ]
 
corrsea
Old
#2680  
corrsea's Avatar
Senior Member
Thanks Meter 550
Posts: 1,345
Join Date: Apr 2010
Default Re: [Kernel][2013/FEB/10][GT-I9300][Samsung JB U7][3.0.62][Aroma] Yank555.lu kernel v

Quote:
Originally Posted by invinciblecc View Post
But it sure is not as should
Didn't get what up meant by the above line brother please elaborate sorry for my bad english
Finally enjoying s3
Yanks kernel
Sotmax v13
Zram enabled
Swap enabled

---------- Post added at 11:16 PM ---------- Previous post was at 10:59 PM ----------



Did u mean to say that u r not sure that it would damage some something and it could possibly damage the phone even right

Finally enjoying s3
Yanks kernel
Sotmax v13
Zram enabled
Swap enabled
Maybe I can reassure you. I've been using a 1.5 amp iphone charger with the 1500 setting. I have had zero issues. I have now purchased a 2 amp charger and have been using it for the last week. There are no problems and as expected it charges at the same rate as the 1.5 amp charger.
My battery is now 8 months old and preforming just as well as when new.

I use battery monitor widget to monitor my battery and I have not noticed any increase in battery temperature while charging at 1.5 as opposed to 1 amp.

As a general rule high temperatures are the enemy of battery longevity.

IMO the only scenario you need to be wary of is using the 1amp setting for USB charging. There is a theoretical potential to damage your computer's usb port if you have an old computer that does not have usb 3 0. The other issue that may arise is if you use your phone for navigation on a hot day while plugged into the car charger. In this instance your battery will get very hot. Even here there is a failsafe though. You will get a popup screen telling you the battery temp is too high and that charging has been disabled. Very annoying. I have had that happen once so I tend not to use usb fast charge as a rule

I would add the caveat that this is my experience only and not a recommendation. As with anything outside the normal parameters of these devices you do so at your own risk.

The only thing I would say with certainty is ditch the stock Samsung charger and use the Samsung cable for data transfer only.



Sent from my SGS3 using Tapatalk
ROM Sotmax Ultimate V14
Kernel Yank555.lu-V3.1i

The Following 2 Users Say Thank You to corrsea For This Useful Post: [ Click to Expand ]
THREAD CLOSED
Subscribe
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes