[Q] HELP - MJ7 to MK2 to NC5, Hyperdrive, Softbrick
So I went from Hyper RLS16 MJ7 to MK2 using odin, then used VZW OTA to go to NC5. Rooted, Installed Safestrap, then installed Hyperdrive RLS17 (on stock slot per sbreens instructions). For some reason I was having some weird Quirks and decided to try to flash NC5 in odin again using surges file, It started to flash (full wipe method with PIT file) and failed, so now I have the problem where it starts to flash, fails, the I jut re-partition and am able to get back into download mode, but Its gets up to ABOOT in odin, then fails. Here is the messages in odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user _low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
If anyone has any ideas, please let me know, I have tried going back to MK2, but I am assuming its locked out because it fails instantly.
Let me know if there is more info needed.
Verizon SCH-I545 Galaxy S4 NC5 baseband.