* Your warranty is now void. * I am not responsible for bricked devices, dead SD Cards, thermonuclear war, or you getting fired because the alarm app failed. * Please do some research if you have any concerns about this guide before following it! * YOU are choosing to make these modifications. * And if you point the finger at me for messing up your device, I will laugh at you.
THE FOLLOWING STEPS SHOULD ONLY BE PERFORMED ON A SAMSUNG GALAXY STAR PRO/PLUS (GT-S7262)
1] Download SuperSU.zip
2] Transfer it (without extracting) to your phone's External SD Card
3] Download recovery.tar.md5
4] Switch off your phone
5] Put your phone in Download Mode (Volume down + Home + Power buttons simultaneously)
6] Press Volume Up to continue when asked
7] Download Odin.zip on your PC
8] Extract Odin.zip with Winrar and open Odin.exe file (the file with a blue icon)
9] Connect Phone to PC with USB Cable
10] Wait for some 15 seconds and see if COM(number) port has come in Blue colour
11] Select PDA and browse to recovery.tar.md5
12] Click the Flash button
13] Wait for it to show RESET in blue colour
14] After it shows Reset Disconnect phone from PC by removing USB Cable
15] Remove Battery of Phone
16] Insert Battery of phone
17] Put your phone in Recovery Mode (Volume Up + Power + Home buttons simultaneously)
Now use Volume buttons to navigate Up and Down (To go up, press Volume Up button Once. To go down, press Volume Down button Once) And To select an option, use the Power Button
18] Go to Install Zip From SD Card Select it
19] Go to Choose Zip From SD Card Select it
20] Now browse to SuperSU.zip where you had transferred it to your external SD Card
21] Select It
22] Go to Yes by pressing Volume Down button. Select it
23] After the process completes, your phone is successfully rooted
24] Now Go Back And Select Reboot Phone
Q1] I'm facing White Screen during recovery!
> This is because you are on an older firmware version. You should download a firmware later than S7262XXUAND5.
Recommended firmware version: S7262XXUANF1
Remember. Flash only if u have white screen recovery problem. Otherwise you don't need to.
Steps to flash firmware:
1] Download the firmware
2] Extract the .zip file with Winrar
3] You will get a .tar.md5 file
4] Follow Steps 4 to 16 mentioned above. But you will flash the (firmware name).tar.md5 instead of recovery.tar.md5
5] After this, flash the recovery by the procedure mentioned above.
6] Your recovery should now work
Please Click the Thanks Button Guys! Please Sign In with a Google account if you dont have an XDA account and come here and click the thanks button! Hope this Guide helped you! If you guys have any problem, quote me here.