[Q] Newsmy car pad quad core dt3256s faulty ANDROID BOX

7 posts
Thanks Meter: 0
By Mr Winter, Junior Member on 29th August 2014, 11:10 AM
Post Reply Subscribe to Thread Email Thread
2nd February 2015, 09:32 PM |#21  
Junior Member
Thanks Meter: 0
Happy with the new operating system,
I'm now trying to connect a Mic to the Android box.
My goal is to use "ok google" and Android speech recognition.

I have used a standard USB mic, like this from Aliexpress:
the voice cannot reach the android unit. Since I disassembled and re-soldered the cables I assume I did some mistake..

Then with this better quality mic:
the 3,5 to USB adapter included is not Mini-USB standard so I bought a standard one, but no luck: still no signal in Android box.

There is something I have to activate?
I read several posts on the unit NU3001 about the use of the mic but maybe my unit is different.
Someone has a tip?

Edit: I noticed, i'm writing in a thread wich is not for my version: I have DT5233
Last edited by Cruiser_541239; 2nd February 2015 at 09:39 PM.
28th March 2015, 08:05 PM |#22  
Junior Member
Thanks Meter: 1
You can contact Sindy at:

She has helped me a lot with translation etc.
28th March 2015, 08:31 PM |#23  
Junior Member
Thanks Meter: 0
I was using a defective USB mic. Replaced with a new one, I managed to get voice recognition.
The mic is this:
Still, it's difficult to get a clean voice when you drive or someone else is talking. Too noisy. I need to speak very loud.
I'm thinking a new position where to put the mic
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes