Hi everyone, We rooted the Alcatel OT Pop S7 !
thanks goes to my friend @danycmoi who helped me to get this device rooted !
Here's all you need :
- Recovery.img+le Scatter File (For POP S7 ONLY) : http://d-h.st/BPN (You can try it on Vodafone Smart4Power but backup your phone first !)
- Root_KitKat_4.4.zip : http://d-h.st/vkQ
- MTK Driver_Auto_Installer_v1.1236.00 : http://d-h.st/p3m
- SP FlashTools V5.XX : http://mtk2000.ucoz.ru/down11/SP_Flash_Tool_v5.1352.01.rar
How to flash :
Stock Recovery :
About OTA Updates
Don't forget to thanks my friend @danycmoi
thanks goes to my friend @danycmoi who helped me to get this device rooted !
Reminder : We are not responsible if your device get damaged while rooting it...
Here's all you need :
- Recovery.img+le Scatter File (For POP S7 ONLY) : http://d-h.st/BPN (You can try it on Vodafone Smart4Power but backup your phone first !)
- Root_KitKat_4.4.zip : http://d-h.st/vkQ
- MTK Driver_Auto_Installer_v1.1236.00 : http://d-h.st/p3m
- SP FlashTools V5.XX : http://mtk2000.ucoz.ru/down11/SP_Flash_Tool_v5.1352.01.rar
How to flash :
0- Copy "Root_Kitkat_4.4.zip" in your SD card.
1- Make sure you have USB debug option checked (in settings/developpers options).
2- Open and install the MTK Auto-Drivers
3- Turn off your phone and connect it to your computer (this will load up the MTK drivers).
4- Remove your phone from computer and make sure its turned off
5- Make sure you have extract "SP Flash Tools" and "recovery.img+scatter.zip"
6- Run SP Flash Tools AS ADMIN
7- Click on "scatter-loading" and select "MT6582_Android_scatter_emmc.txt " from the previously extracted "recovery.img+scatter.zip"
8- Check "RECOVERY" box ONLY, double click on the empty green space on this line and select the file "recoveryCWM__Alcat_POP_S7.img"
9- Click the "Download" button
10- Connect the phone (make sure it was turned off)
You'll see a red line loading and then a yellow line loading. At the end, you will see a green circle saying "OK" !
Congratulation, you have installed the CWM Recovery !
Now, let's root it :
11- Remove the USB cable
12- Turn on you phone by holding VOL+ and POWER button - You will enter the CWM recovery !
13- Select "install zip from SD Card"
14- Select the file "Root_KitKat_4.4.zip" and confirm its installation.
15- Select "reboot to system now"
Your device is now rooted ! Congratulations !
1- Make sure you have USB debug option checked (in settings/developpers options).
2- Open and install the MTK Auto-Drivers
3- Turn off your phone and connect it to your computer (this will load up the MTK drivers).
4- Remove your phone from computer and make sure its turned off
5- Make sure you have extract "SP Flash Tools" and "recovery.img+scatter.zip"
6- Run SP Flash Tools AS ADMIN
7- Click on "scatter-loading" and select "MT6582_Android_scatter_emmc.txt " from the previously extracted "recovery.img+scatter.zip"
8- Check "RECOVERY" box ONLY, double click on the empty green space on this line and select the file "recoveryCWM__Alcat_POP_S7.img"
9- Click the "Download" button
10- Connect the phone (make sure it was turned off)
You'll see a red line loading and then a yellow line loading. At the end, you will see a green circle saying "OK" !
Congratulation, you have installed the CWM Recovery !
Now, let's root it :
11- Remove the USB cable
12- Turn on you phone by holding VOL+ and POWER button - You will enter the CWM recovery !
13- Select "install zip from SD Card"
14- Select the file "Root_KitKat_4.4.zip" and confirm its installation.
15- Select "reboot to system now"
Your device is now rooted ! Congratulations !
If you want to get the stock recovery back, there you go : http://d-h.st/Fun
Alcatel released one more OTA update, you can't flash it directly.
However, here is the .zip (http://d-h.st/Dcc) update 0003 for PopS7, i flashed it with CWM !
It didn't first work because i deoxeded my phone, so i flashed system.img back and it worked.
Warning : This will flash a new recovery, you can flash CWM again using SP Flash Tools.
You can try this EXPERIMENTAL .zip with no recovery flashing (didn't test it) : http://d-h.st/9NSA
They updated some libs (like camera) and some system apps.
However, here is the .zip (http://d-h.st/Dcc) update 0003 for PopS7, i flashed it with CWM !
It didn't first work because i deoxeded my phone, so i flashed system.img back and it worked.
Warning : This will flash a new recovery, you can flash CWM again using SP Flash Tools.
You can try this EXPERIMENTAL .zip with no recovery flashing (didn't test it) : http://d-h.st/9NSA
They updated some libs (like camera) and some system apps.
Last edited: