Post Reply

Official Nexus 5 Wireless Charger, First Impressions.

OP xupthree60

19th February 2014, 12:23 AM   |  #1  
OP Member
Flag Orlando
Thanks Meter: 7
 
67 posts
Join Date:Joined: Mar 2011
More
I had the tilted wireless charger already (link bellow) but decided to get the official wireless charger as well.
http://forum.xda-developers.com/show....php?t=2611246

Of course its a lot better made then the Chinese charger but is it better in usability and charging speed?

With the Chinese charger I was using the stock nexus charger and cable because they are much better then the cables that came with the charger, more detail in the link bellow
http://forum.xda-developers.com/show...&postcount=116

The info you need to know is that the OEM nexus charger and cable put out about 1000-1100mA while the same cable paired with a samsung 2a block was able to push past 1600mA but not keep it there, leveling out at 1200mA. The OEM block and cable with Chinese charger puts out between 650mA and 730mA

So how does the official Nexus charger compare?
Well to start I tested the new cable with the OEM block and it was putting out just over 1100mA, so we know the cable is better then the OEM cable. Then I tested the new cable with the block that comes with it and got a steady 1600mA and it didnt drop. Now the block itself doesn't say anything on it as to what it puts out, but the charger base says 1.8a, is that what the block puts out? Regardless the block is much better then the Samsung 2a block.
I don't use a case so the phone on the charger itself puts out only a little bit more then Chinese charger keeping a steady 768mA. Now it can drop below and above that number but it really likes 768mA. So while it does have a great cable and block, if all you care about is speed then charger itself is a little faster but not by much compared to the Chinese charger.

As far as usability, I cant get the nexus charger to miss. I can throw it on and it connects every time. With the Chinese one it didn't always connect and i had to make sure i got it in the right spot and make sure, even if I heard the noise, that it didn't disconnect and was actually charging. With the nexus charger I feel confident that the magnets are lining it up and it gets a good connection every time.

As and added bonus, I have heard a lot about how you could possibly charge while vertical attached to a wall. I decided to try this and I can attest that the weak link will be the charger holding the wall not the charger holding the phone, as long as you don't use a case like me. The magnets are more then strong enough to hold the phone vertically, in fact they are more then strong enough to hold it upside down, I tried! The pad that sticks to the surface is just as strong as I've been hearing as well. I literately just slapped it on the wall and then threw the phone up and its holding thus far. I have it only a few inches above my night stand and will update if it falls, but so far it has held up to me taking the phone off and on about 50 times with no issue. I'm not sure how it would hold up as a car mount, only because I don't know how the sticky part of the base would hold up to extreme hot and cold. I image it would probably fall, especially if completely vertical.

I would definitely recommend the Nexus charger over a Chinese one. I you have the $50 then its a no brainier, it was even a couple bucks cheaper then that on amazon and my prime membership got it here on Monday when i ordered on Saturday afternoon. If you only have $13 bucks and don't mind waiting 3 or more weeks then Chinese one charges almost as fast.
Attached Thumbnails
Click image for larger version

Name:	CAM00016.jpg
Views:	1531
Size:	247.3 KB
ID:	2587515  
Last edited by xupthree60; 19th February 2014 at 12:25 AM. Reason: add photo
The Following 3 Users Say Thank You to xupthree60 For This Useful Post: [ View ]
21st February 2014, 09:22 PM   |  #2  
gotzaDroid's Avatar
Senior Member
Thanks Meter: 170
 
728 posts
Join Date:Joined: Sep 2012
More
I too finally went from the orb to the new charger because I wanted a vertical mount. I'm blind as a bat with my contacts out and wanted to be able to see the time on my phone while in bed. With the orb, the angle was bad and my nightstand is taller than my mattress, making it hard to see. So I got the new charger, put it on the side of my nightstand and it's holding just fine. Holds the phone great too and now I can see the time on my phone. As long as you can get a smooth, flat surface, I don't see why mounting vertically would be an issue.

Sent from my Nexus 5 using XDA Premium 4 mobile app
25th February 2014, 08:40 PM   |  #3  
OP Member
Flag Orlando
Thanks Meter: 7
 
67 posts
Join Date:Joined: Mar 2011
More
just wanted to say, it did end up falling off the wall the 2nd night while charging, the charger from the wall, not the phone from the charger. A good sized piece of 3m double sided tape right in the middle of the charger fixed that and I've had no problems since.
3rd March 2014, 11:20 PM   |  #4  
Junior Member
Flag Chepstow
Thanks Meter: 0
 
8 posts
Join Date:Joined: Jan 2010
Charger in use
Can you advise please if the Google charger cuts out once the phone has reached 100% or does it change to a trickle charge? Looking at some of the alternatives (e.g. on Amazon) I haven't found any that automatically cut out at 100% although a few mention about changing to a trickle charge. What's your experience in this regard?

S
[Nexus 5 about to be delivered]
4th March 2014, 07:56 AM   |  #5  
zubsz's Avatar
Senior Member
Flag Birmingham, UK
Thanks Meter: 57
 
258 posts
Join Date:Joined: Nov 2011
More
I bought the official one and I must say that I'm very pleased with my purchase, Is there any apps which can detect the charging voltage so i may test my charger as well?
4th March 2014, 08:40 AM   |  #6  
dsmpampis's Avatar
Senior Member
Thanks Meter: 171
 
679 posts
Join Date:Joined: Oct 2012
Quote:
Originally Posted by zubsz

I bought the official one and I must say that I'm very pleased with my purchase, Is there any apps which can detect the charging voltage so i may test my charger as well?

If you're root, can use Android tuner from play store!

Tapatalked with my Nexus5(aka the Hammerhead)
4th March 2014, 10:44 AM   |  #7  
Senior Member
Flag Dublin
Thanks Meter: 52
 
1,152 posts
Join Date:Joined: Mar 2010
More
Hi guys,
I can see in the UK it costs £34.99 but how much is the delivery charge?

Thanks,
M
17th March 2014, 06:37 PM   |  #8  
Senior Member
Flag Nicosia
Thanks Meter: 5
 
244 posts
Join Date:Joined: Feb 2010
More
how long takes to make a fully charge?
Last edited by giwrgos; 17th March 2014 at 06:41 PM.
20th August 2014, 07:14 PM   |  #9  
VOLTAGEROCK's Avatar
Senior Member
Flag New Jersey
Thanks Meter: 60
 
272 posts
Join Date:Joined: May 2012
More
Quote:
Originally Posted by xupthree60

I had the tilted wireless charger already (link bellow) but decided to get the official wireless charger as well.
http://forum.xda-developers.com/show....php?t=2611246

Of course its a lot better made then the Chinese charger but is it better in usability and charging speed?

With the Chinese charger I was using the stock nexus charger and cable because they are much better then the cables that came with the charger, more detail in the link bellow
http://forum.xda-developers.com/show...&postcount=116

The info you need to know is that the OEM nexus charger and cable put out about 1000-1100mA while the same cable paired with a samsung 2a block was able to push past 1600mA but not keep it there, leveling out at 1200mA. The OEM block and cable with Chinese charger puts out between 650mA and 730mA

So how does the official Nexus charger compare?
Well to start I tested the new cable with the OEM block and it was putting out just over 1100mA, so we know the cable is better then the OEM cable. Then I tested the new cable with the block that comes with it and got a steady 1600mA and it didnt drop. Now the block itself doesn't say anything on it as to what it puts out, but the charger base says 1.8a, is that what the block puts out? Regardless the block is much better then the Samsung 2a block.
I don't use a case so the phone on the charger itself puts out only a little bit more then Chinese charger keeping a steady 768mA. Now it can drop below and above that number but it really likes 768mA. So while it does have a great cable and block, if all you care about is speed then charger itself is a little faster but not by much compared to the Chinese charger.

As far as usability, I cant get the nexus charger to miss. I can throw it on and it connects every time. With the Chinese one it didn't always connect and i had to make sure i got it in the right spot and make sure, even if I heard the noise, that it didn't disconnect and was actually charging. With the nexus charger I feel confident that the magnets are lining it up and it gets a good connection every time.

As and added bonus, I have heard a lot about how you could possibly charge while vertical attached to a wall. I decided to try this and I can attest that the weak link will be the charger holding the wall not the charger holding the phone, as long as you don't use a case like me. The magnets are more then strong enough to hold the phone vertically, in fact they are more then strong enough to hold it upside down, I tried! The pad that sticks to the surface is just as strong as I've been hearing as well. I literately just slapped it on the wall and then threw the phone up and its holding thus far. I have it only a few inches above my night stand and will update if it falls, but so far it has held up to me taking the phone off and on about 50 times with no issue. I'm not sure how it would hold up as a car mount, only because I don't know how the sticky part of the base would hold up to extreme hot and cold. I image it would probably fall, especially if completely vertical.

I would definitely recommend the Nexus charger over a Chinese one. I you have the $50 then its a no brainier, it was even a couple bucks cheaper then that on amazon and my prime membership got it here on Monday when i ordered on Saturday afternoon. If you only have $13 bucks and don't mind waiting 3 or more weeks then Chinese one charges almost as fast.

Have you considered using this charger in the car? From what you're saying, the hold issue seems to be the charger itself. Using double sided 3m thick tape may solve the issue.

The reason I'm curious is because I and many other previous Palm Pre users used to use the touchstone wireless charger in their cars and the phone never fell of even on extreme bumps. It was great being able to simply place the Pre on the charger and if you were lucky you could put the touchstone right in your line of sight (I have an 06 civic so the touchstone fit right next to the steering wheel, to the right. Look at my profile pic or do a search for palm Pre wireless charging in the car and you'll come up with hundreds of results and pics).

Do you think the charger's internal magnets would be strong enough to hold the nexus 5 in place while driving? Right now, I still use the touchstone as a place holder for my 5 as the internal metal discs on the 5 line up nicely with the internal magnets in the touchstone. I did modify the touchstone slightly and added magnets every 90° starting at the 45° position and then the other 3 were 90°apart from the initial magnet. I'll try to post a pic or a video of what I mean. The touchstone is not a qi charger so it doesn't charge but it certainly makes for a super convenient spot for the phone to be especially when using navigation. Also the nexus has not fallen once while driving over some pretty harsh bumps.

What do you think?

Sent from my wondrous Nexus numeral 5
Last edited by VOLTAGEROCK; 21st August 2014 at 02:12 AM.
20th August 2014, 09:31 PM   |  #10  
Senior Member
Thanks Meter: 28
 
241 posts
Join Date:Joined: Mar 2011
Quote:
Originally Posted by VOLTAGEROCK

Have you considered using this charger in the car? From what you're saying, the hold seems to be the charger itself. Using double sided 3m thick tape may solve the issue.

The reason I'm curious is because I and many other previous Palm Pre users used to use the touchstone wireless charger in their cars and the phone never fell of even on extreme bumps. It was great being able to simply place the Pre on the charger and if you were lucky you could put the touchstone right in your line of sight (I have an 06 civic so the touchstone fit right next to the steering wheel, to the right. Look at my profile pic or do a search for palm Pre wireless charging in the car and you'll come up with hundreds of results and pics).

Do you think the charger's internal magnets would be strong enough to hold the nexus 5 in place while driving? Right now, I still use the touchstone as a place holder for my 5 as the internal metal discs on the 5 line up nicely with the internal magnets in the touchstone. I did modify the touchstone slightly and added magnets every 90° starting at the 45° position and then the other 3 were 90°apart from the initial magnet. I'll try to post a pic or a video of what I mean. The touchstone is not a qi charger so it doesn't charge but it certainly makes for a super convenient spot for the phone to be especially when using navigation. Also the nexus has not fallen once while driving over some pretty harsh bumps.

What do you think?

Sent from my wondrous Nexus numeral 5

Been using the official Qi charger in the car daily, with this set up: http://forum.xda-developers.com/goog...arger-t2573184. Perfect solution.

The Following User Says Thank You to namartlu For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Nexus 5 Accessories by ThreadRank